Hello,
i have the problem that my display pops up, show the Home Screen for Seconds then go idle......... diplay pops up, show homescreen for Secondes then go idle.....
Does anybody know how i can stop display to pop up`? (Animation is disabled, but this doesn´t block the dispaly popup :-( )
Because battery get´s drained.
cu
Harry
Related
Hi to all,
as you know, when new sms is received on Topaz and the screen is not active, green led starts blinking. That usually happens as well on my device, but sometimes there is no sound neither blinking when message is received.
But when I activate the device, the notification of new message appears. The problem is that the message is usually hour or even more older. Anyone has the same problem? Or is it just me?
The blinking light will stop after 5 min, by default. I changed mine to flash indefinitely.
1. Go to Settings - Sounds & Notifications - Notifications
2. Select Messaging: New text message
3. For the "Flash light for ..." option, change it to "No limit"
Message received sound notification
I have the same problem when it comes to playing the message received sound notification when my phone is locked. When I receive messages I can only see the blinking light notification then after I unlock the phone the sound plays. Its really annoying. Does anyone have a solution?
same here. But not always. I think it happens when the device is not locked and the screen is in stand-by
common issue...ROM issue!!! hopefully it will be fixed with the next ROM release
Yes I'm getting this to, it seems to be intermittent... And its annoying...
I picked it up yesterday off the table turned it on and Yep the SMS sound notified me and said it had a new sms and the green led started blinking, its like it goes into some sort of sleep mode and when you pick it up to turn it on, it then lets you know you have a message..... I hope there's fix for this soon..
R..
Hi
I had this issue and fixed it.
I used Advanced Config and under the power settings changed 'Battery resuming from suspend timeout' changed this from 1 second to 10 seconds.
The problem is the device wakes up, often gets enough time to signal the LED to flash but the device suspends again too quickly for the sound to play.
Regards
Phil
PhilipL said:
Hi
I had this issue and fixed it.
I used Advanced Config and under the power settings changed 'Battery resuming from suspend timeout' changed this from 1 second to 10 seconds.
The problem is the device wakes up, often gets enough time to signal the LED to flash but the device suspends again too quickly for the sound to play.
Regards
Phil
Click to expand...
Click to collapse
The problem is that the device even does not start blinking. So it behaves like there is no new message until you press power off button and the screen becomes active. Not sure whether we are talking about the same problem
Hello there!
I have a weird problem with my Tytn2. When i try to turn it off by pressing for 5 seconds the power button, it displays on the screen the regular message, that power will be turned off and i may lose data if not saved. Press ok and the power seemes to be turned off completely, because the green led won't flash. But, when i press the power button trying to turn on the device, it doesn't boot for entering the system, it just suddenly display the Orange Logo and above it a tiny black bar with the proper icon showing me that i have no phone signal at all (see picture). By pressing the "x" in the right side of the bar, the logo dissapear and appears the home screen, but the same icon is showing that i have no signal at all. I have to go to the comm manager, press once the Phone symbol which is already blue (enabled), and it sticks on the Flight mode. Press once again the Phone, and i have phone signal. The fact is that the phone it doesn't turn off completely and it hangs in a weird state (sleep mode ?). Please help me if you can! Thank you very much !
Hard-Reset your phone.
Hey,
I have a Bell SGS, totally stock. It's suddenly become incredibly slow.
I haven't installed any new apps recently, or changed any settings.
When I press an icon, any icon here is what happens:
- I put my finger on the icon and let go, nothing happens for 2 seconds.
- The icon goes 'dark' like it is being depressed, stays that way for about 3 seconds
- The icon finally gets 'clicked' and I get the 'ding' sound
- The screen goes black with only status bar for about 5 seconds
- finally the app will show up, but if I press anything, it is unresponsive
- the app will become responsive after about 5 more seconds
- If I click a text box (like in stock messaging app), it freezes for another 4-5 seconds, the keyboard doesn't come up
- Finally the keyboard will come up.
ALSO:
- The phone app takes ages to launch.
- Anytime there is a screen to scroll, the scrolling is unresponsive for the first few seconds, its painful
- pressing the home button takes ages to bring me to home screen
- Often the phone just locks up and I can't turn the screen on, have to do a battery pull (once a day or so), I can't figure out what is causing it.
There are no apps running while this is happening, I looked at all running processes and everything seems normal, nothing hogging CPU.
Reboots don't fix it, it comes back just as slow
All the haptic feedback is way late, sometimes the little buzzes get queued up, so it wont do anything, then all of a sudden it will buzz 10 times in a row as it catches up with the button presses
Samsung email (which I use because I like how it handles multiple accounts) is the slowest program in the phone. When it loads up, I click on one of my accounts, it takes literally 30 seconds to load the messages. Then I still can't scroll for another 10 seconds, its agonizing. Switch to the other account? Another 30 seconds. Both accounts are set to keep emails from the last 14 days (not that much).
So, what the hell is going on? I took it to the Bell store, and even with the stupid warranty, they said "well, its still working, so theres nothing we can do"
Hey guys.
Running the latest version of Android Auto on my LG G4.
If have an issue regarding screen timeout.
Under Options i have set the timeout to leave it in when power is connected.
In most times i doesnt have power connected, so the display shuts off after the timeout -> OK.
When ill have it switched on (with DT2W or power button) and hit the microphone icon on the right upper corner, google voice command popup is activated and i can speak my command.
Ex.: i want to send a whatsapp message, speak my message, it responses with the message i have spoken, and bam display shuts off during it reads back my message !??!
Is this a known issue?
thx
pOpY
I have a stock XP, after restarting yesterday, the screen turned off after 2 seconds in the home screen.
The LED flashes, get text alerts and calls. Can not answer them though. When I restart again the screen comes back on,
I can put the password to confirm a restart and then the screen goes black after it shows the home screen.
Any ideas or fixes?
Thank you