Database Develop

oh god i think i bricked my 8125

so i upgraded to t mobile 2.26 and it worked fine..then i tried to flash the underground wm6 and it stalled out at 96 percent and errored...now im stuck at the boot screen with IPL 2.25 and spl 2.25 ....when i try to run the RUU it give me error: 260 or 274 connection or update error...
i dont know what else to do...anybody have any suggestions? please help!

Please read through the Wiki before posting.
Direct link: http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard#upgradings
There are several suggestions there on reviving a possibly bricked phone.

i did try that already to no avail...currently i am trying to use the shelltool to flash it..it picks up this info: version 2.26.10.2 device wizard lang. WWE brand HTC ...CID n/a ROM...N/a...says this should take more then 15 min..ill update on the progress....i really hope this works:-(

stolli said:
i did try that already to no avail...currently i am trying to use the shelltool to flash it..it picks up this info: version 2.26.10.2 device wizard lang. WWE brand HTC ...CID n/a ROM...N/a...says this should take more then 15 min..ill update on the progress....i really hope this works:-(
Click to expand...
Click to collapse
Follow this:
http://forum.xda-developers.com/showthread.php?t=298613
BTW:It really helps if you tell us what IPL, SPL, OS versions you are on (those numbers that show up when you reboot). Also what type of phone you have (G3 or G4).

im sorry...it says 2.25 for both...however on the shelltool it says 2.26 so i dont even know anymore..
i did follow that tut....the problem is..i cant seem to flash from the bootloader screen...the RUU wont flash to my phone..it gives me an error when its checking phone info...o and its a G3 phone..(to the best of my knowladge)..when i started my rom was 2.25.11.1

stolli said:
im sorry...it says 2.25 for both...however on the shelltool it says 2.26 so i dont even know anymore..
i did follow that tut....the problem is..i cant seem to flash from the bootloader screen...the RUU wont flash to my phone..it gives me an error when its checking phone info...o and its a G3 phone..(to the best of my knowladge)..when i started my rom was 2.25.11.1
Click to expand...
Click to collapse
Why are you doing shell tool with a G3 (I've seen where some G3's have been bricked with shell tool is used on them)? Did you try to flash the Wizard Love ROM? That seems to help in a lot of situations.
So again, more info helps. What is the exact error you are getting. And what rom are you trying to install? Is your phone CID Unlocked? May be worth trying to go back down to the Button Rom and doing the CID Unlock again.

PROBLEM SOLVED!
i dont know what was wrong..really..i just restarted my comp...and downgraded to a stock rom..and it worked fine!
man you have no idea how much i was freakin out..
thanks for all your help! i really appriate it!
time to try again

strucked with boot loader screen in imate kjam

i bricked my imate kjam while upgrading to wm6.now strucked with bootloader screen.nothing can be done .please help.it shows ipl 2.16 and spl 2.16 on bootloader screen.it hapened when i tried upgrade to wm6 using sp5 upgrade tools.

Firstly, this is not brick. A brick is one that you can even power on the Wizard.
Flash with your K-Jam original ROM to get back your OS, then following the stickies in this forum to unlock your Wizard, then flash one of the WM6 ROMs here using bundled RUU application.
p.s I don't know what "sp5 update tools" is.

how to flash back my original rom in kjam.
Thanks for response.can u tell me where can i find step by step procedure for Flashing my K-Jam to original ROM to get back my OS, my ipl 2.16 and spl 2.16 . I dont want to do anything wrong from now.please tell.thanks.

sajipavithram said:
Thanks for response.can u tell me where can i find step by step procedure for Flashing my K-Jam to original ROM to get back my OS, my ipl 2.16 and spl 2.16 . I dont want to do anything wrong from now.please tell.thanks.
Click to expand...
Click to collapse
Download official k-jam Rom 'K-JAM_WWE_216901_2169101_020710_ship.zip' from official website of i-mate k-jam or from the following link below:-
ftp://ftp.clubimate.com
1.unzip the Rom zipfile,get your phone into bootloaders screen (multicolored screen)by pressing and holding down the camera button and the Power ON button together,the phone will start in bootloaders(multicolored screen) it'll show you ipl/spl 2.16
2.when in bootloaders,connect your phone with pc via usb cable, a small usb written will appear at the bottom of the multicolored screen of your phone.confirm it.
3.open the unzipped folder of the downloaded Rom,run the RUU icon in it(double click Ruu.exe)
4. follow the instructions and flash the Rom,after completion,your phone will restart and start working.
Good luck !

zabardast_1 said:
Download official k-jam Rom 'K-JAM_WWE_216901_2169101_020710_ship.zip' from official website of i-mate k-jam or from the following link below:-
ftp://ftp.clubimate.com
1.unzip the Rom zipfile,get your phone into bootloaders screen (multicolored screen)by pressing and holding down the camera button and the Power ON button together,the phone will start in bootloaders(multicolored screen) it'll show you ipl/spl 2.16
2.when in bootloaders,connect your phone with pc via usb cable, a small usb written will appear at the bottom of the multicolored screen of your phone.confirm it.
3.open the unzipped folder of the downloaded Rom,run the RUU icon in it(double click Ruu.exe)
4. follow the instructions and flash the Rom,after completion,your phone will restart and start working.
Good luck !
Click to expand...
Click to collapse
hi
I did the exact thing , I've got no errors during that but i still have a blue screen with these
IPL 2.16 , SPL 2.16 , GSM 02.07.10 , OS 2.16.9.1
what did i wrong?
thanks

hello, I am very new to this forum and also new to a windows phone. i will appreciate your patience and kindness to help me. I tried flashing an imate kjam using SOFTSPL. I am now stuck at the muilticolored screen displaying IPL 2.16.0001, SPL 1.06
I dont even know what to do now. i downloaded 'K-JAM_WWE_216901_2169101_020710_ship.zip' from rapidshare and when i tried loading its saying invalid vendor id. unfortunately we can access the clubimate website here in south africa.
Please help me gurus and evryone who has the mercy for me.
Thank you so much..

IPL 2.16.0001 = G4 and SPL 1.06 = G3 this means your phone is bricked.
To my knowledge nobody has recovered from this.

only ahmar sohail can do that

So ahmar sohail plz help my imate stuck and i love my fone

djkata1 said:
So ahmar sohail plz help my imate stuck and i love my fone
Click to expand...
Click to collapse
why do not you use WST to solve problems on your device..???

AKU3 stuck

format is failed after a power outage in the middle of ugrading with shell tool.
made it worse bu trying to flash with tmobiles latest rom.
so now i'm stuck in boot screen with the following
Device is g3 with
IPL 3.08
SPL 3:08
GSM 02.69.11
OS 3.8.2.1
did i mention CID unlocked?
please advice

rephrase
Let me rephrase the question.
I have a friend who saw me use shell tool to upgrade my cid locked wizard.
He went home to try the same on his cid locked g3 wizard.
he had bad luck and it was interrupted mid way through so he brought me his dead wizard.(stuck on bootloader)
The only official rom i had was Tmobile's 3.08 so i flashed it to try and revive it.
it flashed and finished but still stuck on bootloader.
when i try and hard reset it says "format is failed".
button rom wont work, wizard love wont work, sd method wont work as it is cid locked.
Any ideas?
And if none, will imei-check work..

Get the official stock ROM for his Wizard, then flash it and you will get a working Wizard back.
However, if the IPL and SPL still stays at 3.08, there is possibility that IPL and SPL not downgradeable, so unlocking may not be possible.
Another thing...by CID unlocking the Wizard, there is no reason to use ShellTool while you can actually use RUU directly! Using ShellTool may lead to incomplete update!

Not yet home
Hey, the stock rom (tmobile 3.08) succesfully flashes but the wizard still doesnt boot. it gets stuck on the first screen.
Any more ideas?
BTW i'm very experimental so i'll try anything..

Hi,
Have you tried to flash the wizard with Hard-SPL or Soft-SPL.
I had the same with mine wizard (G4) but Hard-SPL worked for me.
You have a G3 so I don't no if it will work. Otherwise read this thread first post
Hope it will work.
Peter

pd2903 said:
Hi,
Have you tried to flash the wizard with Hard-SPL or Soft-SPL.
I had the same with mine wizard (G4) but Hard-SPL worked for me.
You have a G3 so I don't no if it will work. Otherwise read this thread first post
Hope it will work.
Peter
Click to expand...
Click to collapse
Both solutions advised require WinCE to boot to be applied... which isn't the case here

hey
mestrini said:
Both solutions advised require WinCE to boot to be applied... which isn't the case here
Click to expand...
Click to collapse
So mestrini,
What to do??
will imei-check work?
And what exactly is format is failed?

Try this thread http://forum.xda-developers.com/showthread.php?t=298613
This worked for a friend of mine. he has a G3.
Peter

stuck in boatloader screen

My phone is stuck in boatloader screen when you try and run a new rom it goes throw the process of installing after it gets to a 100% phone turns off comes back on in boatloder screen but the ipl and spl change anyone ideas how to fix

50 posts
jay05 said:
My phone is stuck in boatloader screen when you try and run a new rom it goes throw the process of installing after it gets to a 100% phone turns off comes back on in boatloder screen but the ipl and spl change anyone ideas how to fix
Click to expand...
Click to collapse
Some xperience huh!
Get your info please
without it we cant do much for you!!!!!!!!1
like my signature...
iplspl unlocked or not
g3 or g4
first rom
wich one you have try to upgrade etc etc
everything you remember and can give us..
Im tired to ask this....
So faster you can get this fastest to found a slution ok? bye.

l
iplspl 2.21 cdi unlocked
g3
was using the octaivoi wm6 rom
have tried using the o2 original roms
the phone just whent into bootloader by its self roms will load but after the 100% phone turns off then comes back on but still in bootloader screens but the ipl and spl will change any ideas

Read on the upgrade forum
jay05 said:
l
iplspl 2.21 cdi unlocked
g3
was using the octaivoi wm6 rom
have tried using the o2 original roms
the phone just whent into bootloader by its self roms will load but after the 100% phone turns off then comes back on but still in bootloader screens but the ipl and spl will change any ideas
Click to expand...
Click to collapse
So its not bricked! you have a hope on your hands.
There is more than one solution to you... read upgrade forum

Moved Thread to Upgrading Where It Belongs.
By Accident I formatted my SD card containing the Originall Suplied Stock Rom.
The Ultimate Life Saver in most Cases.

need urgent help

Hello, I'm new here and I really need your help..
I downloaded the latest rom from t-mobile for my htc charmer and it just stands there on a boot screen showing:
IPL 3.08
SPL 3.08.0000
GSM 02.69.21
OS 3.8.2.21
I've searched and tried everything on this forum and nothing will work. I tried flashing back first official rom but I got an error message saying upgrade only, you need newer nk.nbf also with ROM update utility no id but it only changes my IPL not SPL GSM and OS. I can enter into a bootloader but I don't know what to do now because like I said I tried everything on this forum.
Please help, any suggestion will be usefull, I'm without a phone now..