Database Develop

[Q] My phone just flipped out on me...No it's not bricked!

My phone (model 1007) had been rooted and running Serendipity. All was well until I had trouble with phone calls. So I unrooted and reflashed to stock. I reformatted and it was like brand new, out the box. I didn't have the time to reroot so I kept it clean. I pressed on 'update' on the settings menu (was that stupid of me?) and it just shut down. So NOW,
I can't turn it on! My phone starts to turn on but just shows this little spinning circle and the screen goes black. I can get into download and recovery though, so that's good right?
The phone will only charge. The very FEW times I actually got it to turn on the phone said that the USB was connected when it wasn't!
Could someone please, please help me?
Also, this is a phone from the warranty dept. It's refurbished because my other Captivate wouldn't turn on (I'm just having some sucky luck, right?)
So am I still able to return it? It's been less than 90 days i got it and has never been in contact with water or dropped. In fact, I always cradle it in a nice case.
I'm just terrified of the horror stories I've heard about Samsung warranty dept and AT&T's warranty dept. I don't want to give it to them to have some crazy $500 charge, you know? I think I don't have anything to worry about but it just freaked me out.

I had a similar experience, but mine caught itself in a reboot loop. I wa able to get back into download mode and re-flash, fixing the issue.
Have you tried to see if it will at least go into download mode?
Sent from my SAMSUNG-SGH-I897 using XDA App

Restless101 said:
My phone (model 1007) had been rooted and running Serendipity. All was well until I had trouble with phone calls. So I unrooted and reflashed to stock. I reformatted and it was like brand new, out the box. I didn't have the time to reroot so I kept it clean. I pressed on 'update' on the settings menu (was that stupid of me?) and it just shut down. So NOW,
I can't turn it on! My phone starts to turn on but just shows this little spinning circle and the screen goes black. I can get into download and recovery though, so that's good right?
The phone will only charge. The very FEW times I actually got it to turn on the phone said that the USB was connected when it wasn't!
Could someone please, please help me?
Also, this is a phone from the warranty dept. It's refurbished because my other Captivate wouldn't turn on (I'm just having some sucky luck, right?)
So am I still able to return it? It's been less than 90 days i got it and has never been in contact with water or dropped. In fact, I always cradle it in a nice case.
I'm just terrified of the horror stories I've heard about Samsung warranty dept and AT&T's warranty dept. I don't want to give it to them to have some crazy $500 charge, you know? I think I don't have anything to worry about but it just freaked me out.
Click to expand...
Click to collapse
The OTA update ATT sent out has been known to cause these issues on some phones, Here are your 2 options. 1. Return it and get another referb. 2. Go down to your local Radio shack and get the parts for a jig, (directions in the forums. A search for Jig will get you there) and then not worry about much flashing roms from then as a Jig will work 99.9% of the time.
That is of course after you see if you can get into download mode without the jig.

lol I've tried jigs before. I suck at making them and it never worked for me. Clearly, I've been too sloppy in making them. I can get into download mode. But I've already reflashed with the same results. If I keep getting the same results I'm afraid someone will tell me I have a hardware issue.
Is the jig the only thing left to try?
Thanks soooo much for replying!

Restless101 said:
lol I've tried jigs before. I suck at making them and it never worked for me. Clearly, I've been too sloppy in making them. I can get into download mode. But I've already reflashed with the same results. If I keep getting the same results I'm afraid someone will tell me I have a hardware issue.
Is the jig the only thing left to try?
Thanks soooo much for replying!
Click to expand...
Click to collapse
Yes. Sure shot option. Worked like a charm for me

Restless101 said:
lol I've tried jigs before. I suck at making them and it never worked for me. Clearly, I've been too sloppy in making them. I can get into download mode. But I've already reflashed with the same results. If I keep getting the same results I'm afraid someone will tell me I have a hardware issue.
Is the jig the only thing left to try?
Thanks soooo much for replying!
Click to expand...
Click to collapse
Ok you can get into download mode so you should be ok. What have you been flashing?

#1 dont need a jig - just 3 resistors
http://forum.xda-developers.com/showpost.php?p=10112309&postcount=1
HINT dont touch the resistor leads with your bare fingers, it can change the resistance, especially if youre sweaty. USE TAPE on the ends
#2 if you dont think you can do that, you can buy a premade jig on ebay DELIVERED for under 10 bucks, i just ordered one for 8 just in case.

Trusselo said:
#1 dont need a jig - just 3 resistors
http://forum.xda-developers.com/showpost.php?p=10112309&postcount=1
HINT dont touch the resistor leads with your bare fingers, it can change the resistance, especially if youre sweaty. USE TAPE on the ends
#2 if you dont think you can do that, you can buy a premade jig on ebay DELIVERED for under 10 bucks, i just ordered one for 8 just in case.
Click to expand...
Click to collapse
use this one buddy and be patient with it. it works if you need help you can pm me cause ive been there before.

definitely maybe probably bricked

OK well i was installing Darkys latest rom. I was at the point where i was in
download mode and odin. While odin was loading files the usb slipped out of the
phone because nothing besides the stock usb cord happens to stay firmly in the
charging port on this phone. This is the 2nd time this happed but when it
happened this time my phone just stopped working and by stop working i mean i
get absolutely no picture on the screen. nothing happens when its plugged into
power cord or usb cord. nothing. tried holding all 3 buttons in tons of times and
nothing.
Im out of warranty and got no insurance. I did get att to give me 180 credit cuz
i threatened to cancel. so if i cant fix this im gonna use a crappy prepaid phone
for the time being. If the SGS2 doesnt come out by march then ill probably get
an axtrix even tho i would rather get SGS2.
So please does anyone know of anything i can try?? i'm probably gonna goto an att store and try a new battery. Any suggestions would be appreciated???

You tried pulling everything, plug in usb, hold rocker, put back in batt? My understanding is, if you have the bad luck of that cable coming out while loading the boot loader then you r indeed SOL.
Sent from my Inspire '4g'.

Buy or make a jig

Double spacing isn't necessary. We aren't going to grade your post.
You hopefully now understand that flashing to stock isn't the way to avoid problems; it's the way to create big ones.
Try removing the battery, wait a couple of minutes, plug in USB, hold volume up+down, while holding up+down insert the battery and see if that gets you back into download mode.

hololight said:
You tried pulling everything, plug in usb, hold rocker, put back in batt? My understanding is, if you have the bad luck of that cable coming out while loading the boot loader then you r indeed SOL.
Sent from my Inspire '4g'.
Click to expand...
Click to collapse
I tried all that. Ive probably flashed every single rom in the development section of the forum.
If it gets unplugged while doing an update then usually it displays the phone..!..computer picture and you can still get into download mode from there. I'm getting nothing tho.
the reason i think it could be the battery is because it may have been pretty close to dying which is stupid for flashing when it was close to dead but i wanted to hurry up because i had to leave the house. i'm wondering if since the software on there now is corrupt would that make the phone unable to charge. thats why i want to try a new battery

opcow said:
Double spacing isn't necessary. We aren't going to grade your post.
You hopefully now understanding that flashing to stock isn't the way to avoid problems; it's the way to create big ones.
Try removing the battery, wait a couple of minutes, plug in USB, hold volume up+down, while holding up+down insert the battery and see if that gets you back into download mode.
Click to expand...
Click to collapse
just tried what you recommended and nothing happened. tried it a few times. Thanks for helping. I really hope the SGS2 comes out in march. I am not wasting my upgrade on an old phone and i dont really want the atrix

mcord11758 said:
Buy or make a jig
Click to expand...
Click to collapse
would a jig really help me in this situation???

I don't think a jig will help. Usually it is used when your buttons never worked.... but hey... only a couple bucks vs the cost of a new phone.
Sent from my Inspire '4g'.

hololight said:
I don't think a jig will help. Usually it is used when your buttons never worked.... but hey... only a couple bucks vs the cost of a new phone.
Sent from my Inspire '4g'.
Click to expand...
Click to collapse
yeah i know my buttons work, i just cant get my phone to turn on at all. also tried multiple chargers and usb cables. I think i'm screwed. im hoping someone on here heard of this problem before but ive never read anything about it on here before.
Using a POS phone till the SGS2 comes out is gonna suck

anyone know anything?
I will be trying another battery today.

Besides a jig, I have nothing else for you sorry.
But on a different spectrum, if you do get a new phone, dont get the atrix, it is the worst phone out of all the phones coming out on att. Get the inspire our the infuse if you dont want to hold a dinner plate to your head.
Sent from my SGH-I897 using XDA App

JoeyGuard said:
would a jig really help me in this situation???
Click to expand...
Click to collapse
There is no guarantee, but it certainly could

juts tried a new a battery and still nothing.
I'm now rocking a Nokia 2320.
SGS2 I guess but i think i'm gonna be waiting a long time.
this nokia is so bad i dont think im going to make it thru the end of the month

Try the jig. It can not make things worse for you and MAY actually work for your issue.
Sent from my SGH-I897 using XDA App

phone needs to be able to power on for a jig to work.
how are you out of warranty? (besides the custom rom) the phone has a 1 year warranty and it is not been on the market that long.
if the phone *happened* to be *dammaged* in a way that they would never notice AND would NEVER be able to read the memory (with out spending thousands of dollars), THEY WOULD NEVER KNOW you flashed custom rom and voided your warranty. they would try to test it, nope, broken, NEXT...
and SGS2 expected in june

Trusselo said:
phone needs to be able to power on for a jig to work.
how are you out of warranty? (besides the custom rom) the phone has a 1 year warranty and it is not been on the market that long.
if the phone *happened* to be *dammaged* in a way that they would never notice AND would NEVER be able to read the memory (with out spending thousands of dollars), THEY WOULD NEVER KNOW you flashed custom rom and voided your warranty. they would try to test it, nope, broken, NEXT...
and SGS2 expected in june
Click to expand...
Click to collapse
yeah your right i still am in warranty but 2 weeks after i got the phone i dropped it and the screen cracked but the cracks not that bad. So i cant warranty the device because the crack. I did get att to give me $180 credit on my bill. $30 of every 6 month.

Ive heard the international version of the SGS2 will be out long before the att version will be. So i might use my upgrade on an iphone 4 and then sell it and buy the international SGS2.
what do you guys think about that idea?

JoeyGuard said:
Ive heard the international version of the SGS2 will be out long before the att version will be. So i might use my upgrade on an iphone 4 and then sell it and buy the international SGS2.
what do you guys think about that idea?
Click to expand...
Click to collapse
im pretty sure thats what im gonna do. Just not sure if i should use my upgrade on the 3gs for $49 or $200 on the 4g.
What do you guys think we will get me the most profit towards the int version of SGS2??
any opinions would be appreciated.
thanks guys

[Q] Captivate Hard Brick

Hey all,
I was trying to flash from stock (I897UCKF1) to 2.3.3 (I897UCKF1), which were both flashed using Odin. Partway through the 2.3 flash, it froze (which has happened to me many times before), so I disconnected my phone and pulled the battery. Now I've got what seems to be a hard brick; I've tried every button combination I can find and nothing will force it into download.
Would a jig help me here? If not...would I be able to send it into samsung, considering it's still under warranty (I could even throw in an "I dunno what happened, I was just doing the official update!")? I'm really hesitant to drop the money for a jtag, but I will if I must.
Any help is appreciated.

Jarvill said:
Hey all,
I was trying to flash from stock (I897UCKF1) to 2.3.3 (I897UCKF1), which were both flashed using Odin. Partway through the 2.3 flash, it froze (which has happened to me many times before), so I disconnected my phone and pulled the battery. Now I've got what seems to be a hard brick; I've tried every button combination I can find and nothing will force it into download.
Would a jig help me here? If not...would I be able to send it into samsung, considering it's still under warranty (I could even throw in an "I dunno what happened, I was just doing the official update!")? I'm really hesitant to drop the money for a jtag, but I will if I must.
Any help is appreciated.
Click to expand...
Click to collapse
Before you do anything, does the phone show any signs of life at all? Lights come on, makes sounds, levitates several inches off the floor, etc? If you can get it to respond in any way, it's most likely not bricked, just "clay".
If you're in a clay state, you can most likely use a jig (make your own or buy one) to get into download mode and get rolling again.
If it's totally lifeless, JTAG or warranty service are pretty much your only options.

Nope, this one is actually 'bricked.' No lights, no noise, just that damned solid black screen.

Jarvill said:
Nope, this one is actually 'bricked.' No lights, no noise, just that damned solid black screen.
Click to expand...
Click to collapse
If you're under warranty, you could send it back to samsung and hope for the best. There's a monetary risk involved with that, but your other choice is mobiletechvideos (connexion2005) and the $50 Jtag service.
So it's either maybe pay a lot, or definitely pay less.

jmtheiss said:
If you're under warranty, you could send it back to samsung and hope for the best. There's a monetary risk involved with that, but your other choice is mobiletechvideos (connexion2005) and the $50 Jtag service.
So it's either maybe pay a lot, or definitely pay less.
Click to expand...
Click to collapse
att let me keep my old one at no cost. happened in the middle of may.
they sent me one with a blemished screen so im going to eventually pay to jtag my old one and use it as a primary and keep the new one as a backup.

jmtheiss said:
If you're under warranty, you could send it back to samsung and hope for the best. There's a monetary risk involved with that, but your other choice is mobiletechvideos (connexion2005) and the $50 Jtag service.
So it's either maybe pay a lot, or definitely pay less.
Click to expand...
Click to collapse
Thanks for the help. Do you have an idea of what I might've done wrong so I don't do it again?

Jarvill said:
Thanks for the help. Do you have an idea of what I might've done wrong so I don't do it again?
Click to expand...
Click to collapse
It sounds like the bootloader flashing was borked. One of a couple scenarios is currently in place:
1. Mismatched bootloaders (froyo or eclair and GB bootloaders)
2. Corrupted bootloader (one or both)
When Odin was pushing bootloaders to your phone and froze, something didn't completely write, and now the phone can't reach the necessary stages to continue the boot process.
You may want to read up here, as this poster does a really good job of explaining all of this.
My understanding is that JTAG physically connects to the motherboard of the phone and pushes correct bootloaders over whatever is there now.
To prevent this in the future, make sure you have a computer that has a solid power connection, a solid USB cable that has shown it works properly on smaller, non-dangerous flashes, and a good download of whatever rom you're flashing.
And if at all possible, don't pull the cable when you're doing any sort of bootloader flashing (basically jumping to or from gingerbread bootloaders).

For the cost of 3 small resistors, it's worth a shot to build your own jig.
Many people have had good luck that.
Sent from my GT-I9000 using XDA App

Sometimes it will help if you keep the battery out of it for 5 mins, or press the Download Mode button combo for 30 seconds.
Sent from my GT-I9000 using Tapatalk

Don't forget to try gb button combos and eclair button combos.

mrhaley30705 said:
Don't forget to try gb button combos and eclair button combos.
Click to expand...
Click to collapse
he was flashing KF1, the captivate gb. that has the same button combos, its only the I9000 bootloaders that have different (better) combos.

Had the same thing happen to me last night. Mine at least shows life. Froze up while trying to upgrade to 2.3.3. None of the button combos do anything but bring up the Phone <!> PC death screen. Bought the resistors for a jig today, it turned the phone on but right to the death screen again. Any ideas? Guessing jtag is my only option now...

thats not a death screen that is the "flash incomplete" screen, when odin freezes before it writes the image for the download mode screen that screen is all that is there when download protocol is initiated. use the jig and if odin sees it from that screen try flashing from where is is.

studacris said:
he was flashing KF1, the captivate gb. that has the same button combos, its only the I9000 bootloaders that have different (better) combos.
Click to expand...
Click to collapse
You are correct. Had a brain fart here.

[Q] Who has two thumbs and hard bricked his cappy? This guy.

Hey guys. I've had my cappy since last august (one year, obviously) and today an act of god happened while I was trying to flash my phone to serendipity 6.4 - lightning struck my dorm building (poor college student), and the power went out.
anywho, as you know the warranty period is one year (stupid if you're locked in for 2 years, imho) and guess what? my warranty expired YESTERDAY. FML. called AT&T and they won't let me get a new one now, and I'm not eligible for an upgrade. so... i have two options - shell out a lot of cash that I don't have for an insurance replacement or new phone, or fix my phone. I've tried making a jig, and it didn't work. None of the key combos work. It always goes to the phone-warning-computer screen. I searched and searched for a miracle solution but found nothing. Does anyone have anything I can try?
If not... is there anyone out there with an HTC inspire or captivate they'd be willing to sell me? This is the only phone I have, I don't have a backup, nor a home phone line.

With the pc screen you can't hold down the volume buttons and plug in usb with Odin running? If you're on gb kf1 bootloaders I remember seeing somewhere that screen is download mode. Worth a try.
That's one of my biggest fears. Precisely why I started using my laptop for flashes.
Sent from my i897 running MIUI 1.8.12 with TalonMTD kernel.

If ur seeing signs of some kind of life, then ur not hard bricked.
Edit: This may get u into download mode... Pull battery, insert usb into computer (with Odin already open), insert micro usb into ur phone, replace battery. If u get into download mode, put the battery cover on then proceed.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

For2ndtwin said:
If ur seeing signs of some kind of life, then ur not hard bricked.
Click to expand...
Click to collapse
well, it gives me the phone-!-computer screen but nothing else. Jig failed, odin fails, nothing will put it in download.
Edit: for the record, I was using Serendipity 7 before, and had that horrid battery drain problem, so I was trying to flash back to 6.4... if it matters.

^ If u can't get into Recovery, I edited my post above to maybe help with download mode.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

You said JIG failed i really doubt that it will fail try with another JIG.
What bootloaders you are on ?

You try only holding volume down or only holding volume up while plugging into pc from phone off state. ( best way to make sure is pull battery and replace without pushing any buttons. )??
Sent from my i897 running MIUI 1.8.12 with TalonMTD kernel.

rkkaranrk said:
You said JIG failed i really doubt that it will fail try with another JIG.
What bootloaders you are on ?
Click to expand...
Click to collapse
I owe you a beer, sir.
didn't feel like buying another connector so I sacrificed my backup car charger and made a jig with better soldering and all that jaz, and voila, it worked!

edit: See ya got it...good deal.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

For2ndtwin said:
^^ Yeah, reboot ur computer and then try connecting to Odin to flash stock ecair or stock ginger i 9000 or i897 ginger...whichever way u want to go with it.
Click to expand...
Click to collapse
Computer's up, flashing stock currently.
my dormmates thought I was insane when i ran down the hall to my bud's dorm yelling IT'S ALIIIIIIIIVVVVVEEEEEE! I FIXED IT!!!!!! lol
But seriously. If you ever want a free beer...

^^^Hahaha ITS ALIIIVVVVVVEEEE, Yeah i know that feeling how it feels when u fix something.

rkkaranrk said:
^^^Hahaha ITS ALIIIVVVVVVEEEE, Yeah i know that feeling how it feels when u fix something.
Click to expand...
Click to collapse
Yup, complete with waving my phone above my head and everything =)

Lol awesome. Glad you got it working again good to always have a jig on standby.
Sent from my i897 running MIUI 1.8.12 with TalonMTD kernel.

This is precisely the reason why I do all my flashing from my laptop and I have a jig (or two) around me...and an entire pack of resistors on my desk somewhere. I went to the shack the other day and bought the 10 dollar super pack of resistors, and as a Computer Engineering major, I should never have to buy resistors ever again...I gives you somewhere around 500 resistors of differing resistance.

worked with another jig (a better made one)? Gratz!!

Samsung captivate - hard bricked

My samsung captivate had never given me any problems(in the very short but good few months I've had it) until I tried to downgrade from Gingerbread(2.3.5) to Froyo about 4 days back.
While using Odin 1 click (and the phone was rooted) to accomplish what I just said, the process seemingly carried out perfectly, the "passed" message appeared in Odin and it looked like it was a success, but instead of rebooting as usual after flashing, my Cappy just went completely blank, and has stayed like that ever since. :crying:
I have tried every button combo there is, and since Jigs are for soft bricks, I guess there's no use.
The only remedy that I haven't gone for yet, is Jtag.
Can someone, anyone, PLEASE help me here!?
Hoping someone gets it working here..

Yep. If zero signs of life...even when wall charging, then sounds like hard brick.
Which Odin did u use to downgrade ??
Just curious...
Sent from my SAMSUNG-SGH-I777 using xda premium

4-2ndtwin said:
Yep. If zero signs of life...even when wall charging, then sounds like hard brick.
Which Odin did u use to downgrade ??
Just curious...
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Well I've used Odin 3 v 1.8.5 and even Odin3 v1.7 many, many times and it's all run perfectly, but this one was Odin 3 One Click v 1.00
I've never bricked a phone ever, and yeah this one's a badass hard brick for sure.
ANY help would be really appreciated, all!

Can you provide a link to the thread you dl'd from?

mrhaley30705 said:
Can you provide a link to the thread you dl'd from?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=731989
As you can see, it's from here. That's the Odin I used, but I don't think there was anything wrong with the file(at least I hope not)
It completed the process, gave the "passed" message, and then the phone went blank, like immediately.
Any thoughts on how that may have happened? 'Cause I thought it may have been bricked due to Odin crashing, but it did go through till the end, seemingly successful.

Anup7 said:
http://forum.xda-developers.com/showthread.php?t=731989
As you can see, it's from here. That's the Odin I used, but I don't think there was anything wrong with the file(at least I hope not)
It completed the process, gave the "passed" message, and then the phone went blank, like immediately.
Any thoughts on how that may have happened? 'Cause I thought it may have been bricked due to Odin crashing, but it did go through till the end, seemingly successful.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=841512
^ ^ This jig, is it for a hard bricked captivate or a soft bricked one? 'Coz although I'm definitely not confident with tearing up a micro USB cable, I'm going to give it a shot tomorrow. Heading to Radioshack first thing in the morning. Last shot God dammit :/

^
Jig won't do anything for a "Hard" Brick...only J-tag and/or Unbrickable Mod.
Sent from my SAMSUNG-SGH-I777 using xda premium

Anup7 said:
http://forum.xda-developers.com/showthread.php?t=731989
As you can see, it's from here. That's the Odin I used, but I don't think there was anything wrong with the file(at least I hope not)
It completed the process, gave the "passed" message, and then the phone went blank, like immediately.
Any thoughts on how that may have happened? 'Cause I thought it may have been bricked due to Odin crashing, but it did go through till the end, seemingly successful.
Click to expand...
Click to collapse
Something had to go wrong when the jf6 bootloaders were flashed, obviously. If u did not close that Odin yet (unlikely, i know) u could scroll through the log and see what it says about the boot.bin and sbl.bin.
Sent from my SAMSUNG-SGH-I777 using xda premium

Well Odin was closed, as expected. So that's not an option obviously.
Is Jtag doable by users, like could I get instructions on how to go about it? Or would I have to send it in?
And any other ideas?

Regardless, i recommend mobiletechvideos.com for the fix.
Respected and reliable !!
Sent from my SAMSUNG-SGH-I777 using xda premium

How long have you had the phone?? Only three months?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app

Anup7 said:
Well Odin was closed, as expected. So that's not an option obviously.
Is Jtag doable by users, like could I get instructions on how to go about it? Or would I have to send it in?
And any other ideas?
Click to expand...
Click to collapse
Here are some threads from the dev forum...
Developing methods to recover bricks without JTAG
The Captivate Development Platform mod AKA UnBrickable Mod
[HOW-TO]UnBrick the UnBrickable Captivate
....or like I said before, check out mobiletechvideos.com

Anup7 said:
Well Odin was closed, as expected. So that's not an option obviously.
Is Jtag doable by users, like could I get instructions on how to go about it? Or would I have to send it in?
And any other ideas?
Click to expand...
Click to collapse
Dude if nothing works and you have had the phone for less than 1 year call at&t tell him you had your phone plugged into your computer over night charging, you woke up and the phone won't turn on now. And yiur house lost power and regained and there must have been a power surge around your area. You don't know what happened but it won't respond to anything....also do you know if your tripped the flash counter at all? Or did you reset it? P.m. me if any help needed I just went through this with my note....if all else fails p.m. me I have another fix but it isn't free but its cheaper than buying a new phone outright...
Sent from my SAMSUNG-SGH-I717 using xda app-developers app

No flash counter with the Captivate.

4-2ndtwin said:
No flash counter with the Captivate.
Click to expand...
Click to collapse
Well I thought of that too, but then there's a problem. I actually bought this phone from a friend, a couple months ago, since I wasn't sure how good of a model this was and I didn't want to go get myself a new Cappy just to be let down and want another one, you know?
Still, spent 160$ on it.
Anyway, he doesn't have the receipt, there's no way I can get att to replace it like you suggested.
And just a side note, the phone was in mint condition, never even been rooted before it got to me, lol!
Btw nope, no flash counter.

Huh? Att will not ask for a receipt when doing a warranty exchange...I've never had an issue with people not having receipts for a manufacturer defect....you will be fine as long as the phone was purchase less than a year ago
This Public Service Announcement brought to you by a pimped out At&t gNote rocking *The Collectives* AOCP CP1...

Kflan22 said:
Huh? Att will not ask for a receipt when doing a warranty exchange...I've never had an issue with people not having receipts for a manufacturer defect....you will be fine as long as the phone was purchase less than a year ago
This Public Service Announcement brought to you by a pimped out At&t gNote rocking *The Collectives* AOCP CP1...
Click to expand...
Click to collapse
I thought they'd need it as proof, but thanks!
I'll head over to ATT in a couple hours and see what they say.
I'll let you know.

FYI - the return may have a hiccup in it. Since you bought it from a friend and not from AT&T (or an authorized reseller), they don't have any proof of how long you've had it. There's no way for them to know whether you got it yesterday or 2 years ago, so they may put up a fight about honoring the warranty.
This is just speculation, but I just wanted to throw it out there that it may not go as smoothly as we would all like it to go for you.

jmtheiss said:
FYI - the return may have a hiccup in it. Since you bought it from a friend and not from AT&T (or an authorized reseller), they don't have any proof of how long you've had it. There's no way for them to know whether you got it yesterday or 2 years ago, so they may put up a fight about honoring the warranty.
This is just speculation, but I just wanted to throw it out there that it may not go as smoothly as we would all like it to go for you.
Click to expand...
Click to collapse
Thanks for the heads up though!
Any suggestions on how I should go about it then? Should I even tell ATT that I got it from a friend? Instead I could say I got it from ATT but lost the receipt...maybe a loophole somewhere.

If the phone had been activated for less than a year and its not a refurbished unit, they should replace it.