My samsung captivate had never given me any problems(in the very short but good few months I've had it) until I tried to downgrade from Gingerbread(2.3.5) to Froyo about 4 days back.
While using Odin 1 click (and the phone was rooted) to accomplish what I just said, the process seemingly carried out perfectly, the "passed" message appeared in Odin and it looked like it was a success, but instead of rebooting as usual after flashing, my Cappy just went completely blank, and has stayed like that ever since. :crying:
I have tried every button combo there is, and since Jigs are for soft bricks, I guess there's no use.
The only remedy that I haven't gone for yet, is Jtag.
Can someone, anyone, PLEASE help me here!?
Hoping someone gets it working here..
Yep. If zero signs of life...even when wall charging, then sounds like hard brick.
Which Odin did u use to downgrade ??
Just curious...
Sent from my SAMSUNG-SGH-I777 using xda premium
4-2ndtwin said:
Yep. If zero signs of life...even when wall charging, then sounds like hard brick.
Which Odin did u use to downgrade ??
Just curious...
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Well I've used Odin 3 v 1.8.5 and even Odin3 v1.7 many, many times and it's all run perfectly, but this one was Odin 3 One Click v 1.00
I've never bricked a phone ever, and yeah this one's a badass hard brick for sure.
ANY help would be really appreciated, all!
Can you provide a link to the thread you dl'd from?
mrhaley30705 said:
Can you provide a link to the thread you dl'd from?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=731989
As you can see, it's from here. That's the Odin I used, but I don't think there was anything wrong with the file(at least I hope not)
It completed the process, gave the "passed" message, and then the phone went blank, like immediately.
Any thoughts on how that may have happened? 'Cause I thought it may have been bricked due to Odin crashing, but it did go through till the end, seemingly successful.
Anup7 said:
http://forum.xda-developers.com/showthread.php?t=731989
As you can see, it's from here. That's the Odin I used, but I don't think there was anything wrong with the file(at least I hope not)
It completed the process, gave the "passed" message, and then the phone went blank, like immediately.
Any thoughts on how that may have happened? 'Cause I thought it may have been bricked due to Odin crashing, but it did go through till the end, seemingly successful.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=841512
^ ^ This jig, is it for a hard bricked captivate or a soft bricked one? 'Coz although I'm definitely not confident with tearing up a micro USB cable, I'm going to give it a shot tomorrow. Heading to Radioshack first thing in the morning. Last shot God dammit :/
^
Jig won't do anything for a "Hard" Brick...only J-tag and/or Unbrickable Mod.
Sent from my SAMSUNG-SGH-I777 using xda premium
Anup7 said:
http://forum.xda-developers.com/showthread.php?t=731989
As you can see, it's from here. That's the Odin I used, but I don't think there was anything wrong with the file(at least I hope not)
It completed the process, gave the "passed" message, and then the phone went blank, like immediately.
Any thoughts on how that may have happened? 'Cause I thought it may have been bricked due to Odin crashing, but it did go through till the end, seemingly successful.
Click to expand...
Click to collapse
Something had to go wrong when the jf6 bootloaders were flashed, obviously. If u did not close that Odin yet (unlikely, i know) u could scroll through the log and see what it says about the boot.bin and sbl.bin.
Sent from my SAMSUNG-SGH-I777 using xda premium
Well Odin was closed, as expected. So that's not an option obviously.
Is Jtag doable by users, like could I get instructions on how to go about it? Or would I have to send it in?
And any other ideas?
Regardless, i recommend mobiletechvideos.com for the fix.
Respected and reliable !!
Sent from my SAMSUNG-SGH-I777 using xda premium
How long have you had the phone?? Only three months?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Anup7 said:
Well Odin was closed, as expected. So that's not an option obviously.
Is Jtag doable by users, like could I get instructions on how to go about it? Or would I have to send it in?
And any other ideas?
Click to expand...
Click to collapse
Here are some threads from the dev forum...
Developing methods to recover bricks without JTAG
The Captivate Development Platform mod AKA UnBrickable Mod
[HOW-TO]UnBrick the UnBrickable Captivate
....or like I said before, check out mobiletechvideos.com
Anup7 said:
Well Odin was closed, as expected. So that's not an option obviously.
Is Jtag doable by users, like could I get instructions on how to go about it? Or would I have to send it in?
And any other ideas?
Click to expand...
Click to collapse
Dude if nothing works and you have had the phone for less than 1 year call at&t tell him you had your phone plugged into your computer over night charging, you woke up and the phone won't turn on now. And yiur house lost power and regained and there must have been a power surge around your area. You don't know what happened but it won't respond to anything....also do you know if your tripped the flash counter at all? Or did you reset it? P.m. me if any help needed I just went through this with my note....if all else fails p.m. me I have another fix but it isn't free but its cheaper than buying a new phone outright...
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
No flash counter with the Captivate.
4-2ndtwin said:
No flash counter with the Captivate.
Click to expand...
Click to collapse
Well I thought of that too, but then there's a problem. I actually bought this phone from a friend, a couple months ago, since I wasn't sure how good of a model this was and I didn't want to go get myself a new Cappy just to be let down and want another one, you know?
Still, spent 160$ on it.
Anyway, he doesn't have the receipt, there's no way I can get att to replace it like you suggested.
And just a side note, the phone was in mint condition, never even been rooted before it got to me, lol!
Btw nope, no flash counter.
Huh? Att will not ask for a receipt when doing a warranty exchange...I've never had an issue with people not having receipts for a manufacturer defect....you will be fine as long as the phone was purchase less than a year ago
This Public Service Announcement brought to you by a pimped out At&t gNote rocking *The Collectives* AOCP CP1...
Kflan22 said:
Huh? Att will not ask for a receipt when doing a warranty exchange...I've never had an issue with people not having receipts for a manufacturer defect....you will be fine as long as the phone was purchase less than a year ago
This Public Service Announcement brought to you by a pimped out At&t gNote rocking *The Collectives* AOCP CP1...
Click to expand...
Click to collapse
I thought they'd need it as proof, but thanks!
I'll head over to ATT in a couple hours and see what they say.
I'll let you know.
FYI - the return may have a hiccup in it. Since you bought it from a friend and not from AT&T (or an authorized reseller), they don't have any proof of how long you've had it. There's no way for them to know whether you got it yesterday or 2 years ago, so they may put up a fight about honoring the warranty.
This is just speculation, but I just wanted to throw it out there that it may not go as smoothly as we would all like it to go for you.
jmtheiss said:
FYI - the return may have a hiccup in it. Since you bought it from a friend and not from AT&T (or an authorized reseller), they don't have any proof of how long you've had it. There's no way for them to know whether you got it yesterday or 2 years ago, so they may put up a fight about honoring the warranty.
This is just speculation, but I just wanted to throw it out there that it may not go as smoothly as we would all like it to go for you.
Click to expand...
Click to collapse
Thanks for the heads up though!
Any suggestions on how I should go about it then? Should I even tell ATT that I got it from a friend? Instead I could say I got it from ATT but lost the receipt...maybe a loophole somewhere.
If the phone had been activated for less than a year and its not a refurbished unit, they should replace it.
Related
If I flash back to stock rom, will they be able to tell that I have flashed other roms?
I'm considering trying to get a replacement due to random shut downs. My work has me on call and sometimes I pick up my phone and I don't know how long it's been off. My employees often text me important stuff from the job. So this is important to me.
So will they be able to tell?
Nope, make sure to master clear and then get the JH7 update to be sure.
cappysw10 said:
Nope, make sure to master clear and then get the JH7 update to be sure.
Click to expand...
Click to collapse
Agreed.
Though I suggest you hold out for another week or two and have them replace it for the Inspire. I'm going to do that soon, and speak to their 'Android specialists' about it.
Two things I don't like about that phone are the size (it's huge) and the lcd screen. I don't think I could go to an lcd after using samoled.
Plus, how would that work. I have a 2 year commitment with this phone, how could I trade for that one. I'm well past my trial period.
did you buy phone insurance? u coulda always just drop the phone and bust the screen.
if not, flash back to stock and the n00bs in the store wont know the difference. however, if you are well past your trial period, att is gonna send you to samsung more than likely. at least that is what they tried to do with me. my first captivate shut down every time i got a text message.
If you're insisting on switching phones, contact warranty and they'll send you another one. After they've sent you two Captivates, you are within your rights to ask for a different make and model. If they don't comply just ask for the Resolutions team, and they'll help you out.
thank you all
bms231 said:
did you buy phone insurance? u coulda always just drop the phone and bust the screen.
Click to expand...
Click to collapse
Because insurance fraud is always a good idea (purposely breaking your phone is insurance fraud FYI).
yeah. just say you lost your phone and keep it as a spare. i've done it twice now with no problems what so ever.
task650 said:
yeah. just say you lost your phone and keep it as a spare. i've done it twice now with no problems what so ever.
Click to expand...
Click to collapse
They won't put a block on the lost phone?
Sent from my SGH-I897 using XDA App
-Kevlar- said:
They won't put a block on the lost phone?
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
Last time i checked they did but eeh if it work for him it works...
So I was flashing the steam kernel and it failed using Odin. I then got the infamous pic with the cell phone-exclamation-computer. I have had this happen in the past. No prob right? I have a jig which I've used before several times and it worked. Now when I use the jig i get the same pic, not download. I tried adb. device not found. tried pluging in with both vol up and down pressed, same thing. Any suggestions? I'm hoping this is recoverable. I've even tried taking out the battery, plug in usb to comp than phone, holding down vol down button and putting back the battery. Same prob. Tried reinstalling the drivers....same prob.
The fact that your getting that image is a great sign. The jig you are using may be not functioning properly. If its a home made jig, they can easily become ineffective if you touch the resistors. That changes the resistance of the whole jig and will fail to put the phone in download.
Sent from my SAMSUNG-SGH-I897 using XDA App
It's a jig I bought of ebay. It's worked several times in the past.
I soft bricked and got that picture. When I plugged into Odin one click it lit up, and I flashed back to stock. It didn't do it the first time. I opened Odin, plugged in, and held all three buttons, as it looped. After two or three loops, it recognized in Odin, and I was able to restore to stock.
I tried what I was flashing in the first place, and soft bricked again, this time no matter what I did Odin was no go, but I was able to fix with a jig.
Give Odin a try. Others have had that too: phone!computer working as download mode.
Sent from my Captivate running Continuum 5.5
quarlow said:
I soft bricked and got that picture. When I plugged into Odin one click it lit up, and I flashed back to stock. It didn't do it the first time. I opened Odin, plugged in, and held all three buttons, as it looped. After two or three loops, it recognized in Odin, and I was able to restore to stock.
I tried what I was flashing in the first place, and soft bricked again, this time no matter what I did Odin was no go, but I was able to fix with a jig.
Give Odin a try. Others have had that too: phone!computer working as download mode.
Sent from my Captivate running Continuum 5.5
Click to expand...
Click to collapse
Quarlow, you are AWESOME!!!!! Got it to stock again. Didn't use oneclick cuz this build is a 1010 build, so i've been apprehensive about using it, so instead I used Odin 3 v1.52 and used ucjh2 in the pda and 512 pit and repartitioned. Odin recognized the phone even though I had the phone!comp thing going on. First time it failed so I tried again and it worked perfectly. Thanks much my friend, I would've never thought to just try it without having download and the shoveling droid.
I hear about all this JIGS being used, why is it that I dont ever need to use one??? IM GLAD I DONT THOUGH
I hear about all this JIGS being used, why is it that I dont ever need to use one??? IM GLAD I DONT THOUGH
Click to expand...
Click to collapse
If you haven't soft bricked yet then your not flashing enough then I haven't needed mine in quite a while but it is worth it to have around for sure rather than when it happens and you struggle to build one or wait to buy one for a few days/week. Cheapest insurance to have around.
Plus I think most roms have progressed enough that is less common to have bugs in them that would soft brick the phone. But maybe 6-8 months ago with trying out all the different 2.1 and 2.2 roms it was bound to happen. If it wasn't for me getting soft bricked on occasions and learning how to recover from it I wouldn't of learned half what I think I know...
Sent from My KickAss Captivated CM7 OC'd 1.55Ghz/Undervolted
Since I updated to 2.3 with the GB bootloaders I have not needed my jig. I put one together from a spare cord and 2X150k resistors - worked great when I needed it.
I'm on vacation now and want to flash something but dont have my jig...you know how that goes when you need it most...
RockRatt said:
If you haven't soft bricked yet then your not flashing enough then I haven't needed mine in quite a while but it is worth it to have around for sure rather than when it happens and you struggle to build one or wait to buy one for a few days/week. Cheapest insurance to have around.
Plus I think most roms have progressed enough that is less common to have bugs in them that would soft brick the phone. But maybe 6-8 months ago with trying out all the different 2.1 and 2.2 roms it was bound to happen. If it wasn't for me getting soft bricked on occasions and learning how to recover from it I wouldn't of learned half what I think I know...
Sent from My KickAss Captivated CM7 OC'd 1.55Ghz/Undervolted
Click to expand...
Click to collapse
Dude, believe me, i flash like no one you have ever seen, I'm just smart enough not to brick it and if i do, i dont need a jig, my phone has always gone into download mode no prob!
Sent from my Captivate Rocking MIUI!
Through one of my flashing...bricking...odin one clicking I lost my bootloaders that gave me the ability to hold buttons and get into DL or recovery mode. This was all while playing around with 2.1 - 2.2. Since going to 2.3 the button method has always worked...although I still keep the jig handy...just in case...
b-eock said:
Dude, believe me, i flash like no one you have ever seen, I'm just smart enough not to brick it and if i do, i dont need a jig, my phone has always gone into download mode no prob!
Sent from my Captivate Rocking MIUI!
Click to expand...
Click to collapse
I'll keep an eye out if you ever hard brick... . Bricking is typically a part of flashing. Very highly recognized DEV's have PM'd me after hard bricking. There's no shame in it as it happens every now and then.
REMY4223 said:
I soft bricked my older Captivate, but was able to Odin back to stock then to Froyo via Kies. Since I was back to stock I tried the following after reading that ATT was replacing older Captivates.
Just letting everyone know who has a Galaxy S phone. I called ATT (6/21/11)and let them know that my phone has random shutdowns (once monthly), they checked the EMIE (I think that is what it is called) # on the phone, and they are replacing at no cost. I currently have a remanufactured (30 day warranty)1006 build I purchased Oct. 2010. My new SGS is shipped.
Click to expand...
Click to collapse
Remy, Please stop spamming the board. I see that you're excited to let everyone else know about what you were able to do, but you've replied with the exact same message in more than 10 different threads. This behavior will likely end up with some pretty serious repercussions if you continue.
connexion2005 said:
I'll keep an eye out if you ever hard brick... . Bricking is typically a part of flashing. Very highly recognized DEV's have PM'd me after hard bricking. There's no shame in it as it happens every now and then.
Click to expand...
Click to collapse
I still haven't bricked, but I got Adam to do the unbrickable mod for me! Haven't needed it yet.
Sent from my I897 using xda premium
Hey guys. I've had my cappy since last august (one year, obviously) and today an act of god happened while I was trying to flash my phone to serendipity 6.4 - lightning struck my dorm building (poor college student), and the power went out.
anywho, as you know the warranty period is one year (stupid if you're locked in for 2 years, imho) and guess what? my warranty expired YESTERDAY. FML. called AT&T and they won't let me get a new one now, and I'm not eligible for an upgrade. so... i have two options - shell out a lot of cash that I don't have for an insurance replacement or new phone, or fix my phone. I've tried making a jig, and it didn't work. None of the key combos work. It always goes to the phone-warning-computer screen. I searched and searched for a miracle solution but found nothing. Does anyone have anything I can try?
If not... is there anyone out there with an HTC inspire or captivate they'd be willing to sell me? This is the only phone I have, I don't have a backup, nor a home phone line.
With the pc screen you can't hold down the volume buttons and plug in usb with Odin running? If you're on gb kf1 bootloaders I remember seeing somewhere that screen is download mode. Worth a try.
That's one of my biggest fears. Precisely why I started using my laptop for flashes.
Sent from my i897 running MIUI 1.8.12 with TalonMTD kernel.
If ur seeing signs of some kind of life, then ur not hard bricked.
Edit: This may get u into download mode... Pull battery, insert usb into computer (with Odin already open), insert micro usb into ur phone, replace battery. If u get into download mode, put the battery cover on then proceed.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
For2ndtwin said:
If ur seeing signs of some kind of life, then ur not hard bricked.
Click to expand...
Click to collapse
well, it gives me the phone-!-computer screen but nothing else. Jig failed, odin fails, nothing will put it in download.
Edit: for the record, I was using Serendipity 7 before, and had that horrid battery drain problem, so I was trying to flash back to 6.4... if it matters.
^ If u can't get into Recovery, I edited my post above to maybe help with download mode.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
You said JIG failed i really doubt that it will fail try with another JIG.
What bootloaders you are on ?
You try only holding volume down or only holding volume up while plugging into pc from phone off state. ( best way to make sure is pull battery and replace without pushing any buttons. )??
Sent from my i897 running MIUI 1.8.12 with TalonMTD kernel.
rkkaranrk said:
You said JIG failed i really doubt that it will fail try with another JIG.
What bootloaders you are on ?
Click to expand...
Click to collapse
I owe you a beer, sir.
didn't feel like buying another connector so I sacrificed my backup car charger and made a jig with better soldering and all that jaz, and voila, it worked!
edit: See ya got it...good deal.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
For2ndtwin said:
^^ Yeah, reboot ur computer and then try connecting to Odin to flash stock ecair or stock ginger i 9000 or i897 ginger...whichever way u want to go with it.
Click to expand...
Click to collapse
Computer's up, flashing stock currently.
my dormmates thought I was insane when i ran down the hall to my bud's dorm yelling IT'S ALIIIIIIIIVVVVVEEEEEE! I FIXED IT!!!!!! lol
But seriously. If you ever want a free beer...
^^^Hahaha ITS ALIIIVVVVVVEEEE, Yeah i know that feeling how it feels when u fix something.
rkkaranrk said:
^^^Hahaha ITS ALIIIVVVVVVEEEE, Yeah i know that feeling how it feels when u fix something.
Click to expand...
Click to collapse
Yup, complete with waving my phone above my head and everything =)
Lol awesome. Glad you got it working again good to always have a jig on standby.
Sent from my i897 running MIUI 1.8.12 with TalonMTD kernel.
This is precisely the reason why I do all my flashing from my laptop and I have a jig (or two) around me...and an entire pack of resistors on my desk somewhere. I went to the shack the other day and bought the 10 dollar super pack of resistors, and as a Computer Engineering major, I should never have to buy resistors ever again...I gives you somewhere around 500 resistors of differing resistance.
worked with another jig (a better made one)? Gratz!!
qhsusb_dload is all I get. Buttons no work. Doesn't vibe or anything. Soft reset doesn't work. Any help or am I screwed. I flashed overcome 8.9 wiped prior and wiped dalvik after the reboot and black screen since.
Sent from my SAMSUNG-SGH-I727 using xda premium
I'm really sorry but your device is done. The skyrocket people haven't been able to fix this yet by using a jig or qualcomm tools.
Reading and researching is really important. You can't flash any p73xx rom to the i957, it will brick.
This is exactly why I have tried to get a separate forum for the i957, but that hasn't worked yet.
Hope you are under warranty or that is an expensive mistake.
Sent from my SAMSUNG-SGH-I727 using xda premium
I did the exact same thing you did. It is very confusing (Well not really, I just did'nt take my time to read). I was exhausted because I was very happy to have my new skyrocket and new lte tab. I researched and researched. I rooted, installed custom rom and kernel on my skyrocket. I then rooted my tablet and it was great. I then installed a custom rom for a 7300 on my i957 and Boom, gone. Luckily I was within my 30 day return policy. Everything in my home is either jailbroken, rooted, homebrewed, w/e. so I have somewhat experience.
But the combination of tiredness, excitedness, and what ever else comes along with getting new gadgets, I didn't pay attention and blew up my tablet.
Even with my experience and never bricking anything before, I bricked my tablet. I took it back to the store and making believe I never even heard about rooting, jailbreaking, homebrewing; the sales people tried starting it up and eventually they couldn't get it to start up. I got a new tablet, I told them I left the tablet charging overnight and left it charging when I went to work, because I forgot to disconnect it. When I got home from work it just didn't turn on.
Eventually they gave me a new tablet and said do not charge it for more than 8 hours. They said I was the first customer to ever return this tablet because it was defective (This tablet is a beast). I told them sure I learned my lesson.
When I went home, I rooted it lol and installed the oc kernel. Remember there are no roms for the 4g model.
Before I went back to the store where I purchased my phone&tablet, I found that there is a youtube store that fixes bricked phones and tablets (He has videos of him fixing them) but when I emailed him, he said their program does not support in unbricking the lte tablet. This was about a month ago so you can check to see if they support it now. I think to unbrick phones it was like 50-100 dollars (I forgot)
You are not alone, I made the same dumb mistake. Never do important stuff when you are tired or excited or anxious. Sorry man, good luck.
I may have put this in the wrong area it was late last night and I was frustrated. I tried putting a 7300 ROM on a 7300. I didn't try anything fancy lol. But I appreciate the responsses. You think I'll be able to take it back and see what they can do? Maybe they'll exchange it as if it was a defect? I'll take it there today. See if they will exchange.lesson learned for me. Lesson being wait for updates from Samsung. As slow as they are. Lol thanks for the input if anyone has the capability to fix this
Hit me up.
Sent from my SAMSUNG-SGH-I727 using xda premium
A 7300 rom on a 7300 should only soft brick. Can you get into download or recovery?
Sent from my SAMSUNG-SGH-I727 using xda premium
If you try to turn on your tablet and your screen turns on you can try to install the stock rom through odin again and it will work. There is a thread in this forums that explains how. If it is off and you turn it on and ABSOLUTELY NOTHING happens and it just stays with the black screen, no vibration or anything then it is hard bricked.
If it is hard bricked you can try to take it back and act dumb, not sure how long ago you purchased the tablet. If you are still within the 30 days you should be good because the sales people I took my tablet to did not have the machine to see how many times my device was flashed. If you are outside the 30 days they will tell you to send it to a samsung repair dealer (which I think they will see how many times the device has been flashed). Once you rooted your tablet it voids the warranty and they either do not have to fix it or will charge you an amount equal to your tablet. I did hear of cases where people with rooted tablets just returned it and they fixed it for free. I guess it dpeneds on anything else in life (How lucky are you?)
Yes you did put your question on the right place since this is for all the 8.9 tablets. (Thats the problem I came across with, I wish they make two forums for both tablets because they are in fact different.
Posting from my mobile so I didn't read your post again.
It is extremely rare but sometimes this can happen. Did you have repartition checked in Odin? If so that's bad.
There is something called qpst - qualcomm product support tools - that people are trying to get to work to fix hard bricks.
Sent from my SAMSUNG-SGH-I727 using xda premium
No prob man. I'll look that up. I'm gonna seems it in to Samsung see if they can fix it. It's under warranty. Anyone done this before?
Sent from my SGH-I727 using xda premium
mobiletechvideos now has support for hard bricked tabs! finally! just sent the payment today and i will send out my tab once i get home from work. ill keep yall posted on how it goes.
here is the link: http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-tab-8-9-jtag-brick-repair/
Thanks for updating us.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
hell everyone i'm new here and i have searched these fourms for the answer to help me and i havent found it yet i have an AT&T galaxy tab 8.9 and rooted it then tried to load rom on it hence after that it was softed bricked andi tired to fix the soft brick by using the pit in odin and now it will not cut on at all but my pc will recognize there is a device there but i cant get it to do anything no screen turn on or nothing please help
You're screwed dude. If it's still under warranty take it to att and tell them it won't turn on. Then play dumb.
Next time flash the stock Rom from sammobile.com when your soft bricked. Don't mess with the pit.
Sent from my SGH-I727 using xda app-developers app
Can you get into download mode?
What does your computer detect it as? If it is QH_USB or something like that you are boned...
Also, this belongs in general
orlandoxpolice said:
Can you get into download mode?
What does your computer detect it as? If it is QH_USB or something like that you are boned...
Also, this belongs in general
Click to expand...
Click to collapse
it shows up on my pc qhsusb_dload
If it's out of the warranty, call Samsung. They are very nice, they probably will charge you, but I think it's worth it. If it's in warranty, they may at least pay shipping back and forth, but play dumb. Maybe it should be under $200.00. I sent my Galaxy Note to Texas and it cost me $180.00 to replace the LCD+Touch, but they paid shipping.
For me it was worth it, not sure how much an i957 goes for on ebay these days, $350?
RipplingHurst said:
If it's out of the warranty, call Samsung. They are very nice, they probably will charge you, but I think it's worth it. If it's in warranty, they may at least pay shipping back and forth, but play dumb. Maybe it should be under $200.00. I sent my Galaxy Note to Texas and it cost me $180.00 to replace the LCD+Touch, but they paid shipping.
For me it was worth it, not sure how much an i957 goes for on ebay these days, $350?
Click to expand...
Click to collapse
its in warranty for one more month and i got in a contest from at&t
Thread moved to general
Sent from my Nocturnalized One XL using Forum Runner