Related
Ok, i have read many posts, the one from ODIN and ask people, watched videos, and nothing. Im starting in the rooting process, im currently on Phoenix 2.5, before i flashed this rom i made a backup rom with Clockwork, i decided to restore to stock using clockwork, but it failed on me and i fear that my phone was bricked. I flashed again the phoenix rom, but i want to return to my stock rom, but i dont know why, i just want to flash darkys rom, but i dont know how to restore back to stock, if i use odin by default i have to do the master clear, please help me, i dont want to be stuck on this rom.
hernan078 said:
Ok, i have read many posts, the one from ODIN and ask people, watched videos, and nothing. Im starting in the rooting process, im currently on Phoenix 2.5, before i flashed this rom i made a backup rom with Clockwork, i decided to restore to stock using clockwork, but it failed on me and i fear that my phone was bricked. I flashed again the phoenix rom, but i want to return to my stock rom, but i dont know why, i just want to flash darkys rom, but i dont know how to restore back to stock, if i use odin by default i have to do the master clear, please help me, i dont want to be stuck on this rom.
Click to expand...
Click to collapse
#1: Are you disabling Lagfix before flashing? If not, that may be your problem.
#2: Prepare to be flamed for posting in the devs section with a Q&A post.
hernan078 said:
Ok, i have read many posts, the one from ODIN and ask people, watched videos, and nothing. Im starting in the rooting process, im currently on Phoenix 2.5, before i flashed this rom i made a backup rom with Clockwork, i decided to restore to stock using clockwork, but it failed on me and i fear that my phone was bricked. I flashed again the phoenix rom, but i want to return to my stock rom, but i dont know why, i just want to flash darkys rom, but i dont know how to restore back to stock, if i use odin by default i have to do the master clear, please help me, i dont want to be stuck on this rom.
Click to expand...
Click to collapse
POST IN THE RIGHT SECTION (I guess I had to do that, right??)
To answer your question - Gr8danes is right, you should be disabling your lagfix to restore your backup first.
Do this by going into your /sdcard/voodoo directory - Create a folder named "disable-lagfix" and reboot your phone. You will hear the robotic voice reconverting your file system - this will take about 3-5 minutes.
Then proceed with flashing your stock backup.
If that fails, you will have to use ODIN One Click to revert back to Eclair 2.1
born_fisherman said:
POST IN THE RIGHT SECTION (I guess I had to do that, right??)
To answer your question - Gr8danes is right, you should be disabling your lagfix to restore your backup first.
Do this by going into your /sdcard/voodoo directory - Create a folder named "disable-lagfix" and reboot your phone. You will hear the robotic voice reconverting your file system - this will take about 3-5 minutes.
Then proceed with flashing your stock backup.
If that fails, you will have to use ODIN One Click to revert back to Eclair 2.1
Click to expand...
Click to collapse
So as long as the file system is restored (voodoo disabled) you CAN nandroid back to stock? Awesome.
thanks a lot, and sorry for posting in the wrong section.
Suppose everything fails, when i decide to use ODIN, do i need to do the master clear?
hernan078 said:
thanks a lot, and sorry for posting in the wrong section.
Suppose everything fails, when i decide to use ODIN, do i need to do the master clear?
Click to expand...
Click to collapse
no you do not need to master clear
also, the nandroid doesnt backup the KERNEL or the MODEM so you will likely get a bootloop after trying to restore your stock backup. in order to get back to stock, the best option is ODIN.
im using clockwork, i did the backup with clockwork
hernan078 said:
im using clockwork, i did the backup with clockwork
Click to expand...
Click to collapse
yeah, clockwork doesnt backup/restore the stock kernel+modem for you (one of its downfalls on this phone it seems). thats a manual process. the other option is to use the JH7 stock+rooted rom, thats designed for clockwork
But if i disable the lagfix, and do the restore using clockwork, it will fail? I MUST USE ODIN?? If i have to use ODIN, whats the point of doing a backup stock rom?
Pirateghost said:
yeah, clockwork doesnt backup/restore the stock kernel+modem for you (one of its downfalls on this phone it seems). thats a manual process. the other option is to use the JH7 stock+rooted rom, thats designed for clockwork
Click to expand...
Click to collapse
Haven't seen that around here, can you link?
Phateless said:
Haven't seen that around here, can you link?
Click to expand...
Click to collapse
dont know of any links. i just know in my testing that is what happened.
if you look at a backup done in clockwork, there are the following files created:
cache.img
data.img
datadata.img
nandroid.md5
system.img
if you are flashing from a 2.2 rom to a 2.1 backup, you will get caught in a bootloop because you still have the kernel from 2.2, as cwm doesnt backup the kernel for our phones. if you flash a 2.1 kernel, via clockwork, or odin, your backup will boot up, but you will probably get FC's on a lot of things, because the modem is still a 2.2 modem, and causes instabilities. if you then flash a 2.1 modem, your backup will boot up without any issues. the best way to deal with this is to keep a 2.1 kernel and 2.1 modem CWM flashable zips on your sd card alongside your nandroid backup, flash the modem and kernel, then restore the backup.
Pirateghost said:
dont know of any links. i just know in my testing that is what happened.
if you look at a backup done in clockwork, there are the following files created:
cache.img
data.img
datadata.img
nandroid.md5
system.img
if you are flashing from a 2.2 rom to a 2.1 backup, you will get caught in a bootloop because you still have the kernel from 2.2, as cwm doesnt backup the kernel for our phones. if you flash a 2.1 kernel, via clockwork, or odin, your backup will boot up, but you will probably get FC's on a lot of things, because the modem is still a 2.2 modem, and causes instabilities. if you then flash a 2.1 modem, your backup will boot up without any issues. the best way to deal with this is to keep a 2.1 kernel and 2.1 modem CWM flashable zips on your sd card alongside your nandroid backup, flash the modem and kernel, then restore the backup.
Click to expand...
Click to collapse
thats sounds to me like too much work, or things that i didnt do, best option is to use odin then, right?
hernan078 said:
But if i disable the lagfix, and do the restore using clockwork, it will fail? I MUST USE ODIN?? If i have to use ODIN, whats the point of doing a backup stock rom?
Click to expand...
Click to collapse
It backs up apps and settings, but it isn't meant for restoring firmware versions.
If you just want to run Darky's then just flash it and skip the whole returning to stock step. It's really not necessary.
opcow said:
It backs up apps and settings, but it isn't meant for restoring firmware versions.
If you just want to run Darky's then just flash it and skip the whole returning to stock step. It's really not necessary.
Click to expand...
Click to collapse
i dont need to go back to stock to flash another rom? i can just flash darkys on top of Phoenix?
hernan078 said:
i dont need to go back to stock to flash another rom? i can just flash darkys on top of Phoenix?
Click to expand...
Click to collapse
You should use the option in cwm recovery for WIPE DATA/SYSTEM RESTORE before you do, but yes.
hernan078 said:
i dont need to go back to stock to flash another rom? i can just flash darkys on top of Phoenix?
Click to expand...
Click to collapse
Yes, u don't have to restore stock first before flashing another rom, but like said above, make sure to do a factory reset in cwm..
As for odin, you don't have to master clear either, you can use either odin one click or download a stock rom from samfirmware.com and use regular odin...
Sent from my SGH-I897 using XDA App
Phateless said:
You should use the option in cwm recovery for WIPE DATA/SYSTEM RESTORE before you do, but yes.
Click to expand...
Click to collapse
i didnt understood your instructions, i just see and option that says wipe data/facory reset, what do i do to install darkys rom, while still on phoenix?
hernan078 said:
i didnt understood your instructions, i just see and option that says wipe data/facory reset, what do i do to install darkys rom, while still on phoenix?
Click to expand...
Click to collapse
Here are the install instructions from the first post of the Darky's thread:
HOW TO FLASH
Place the ROM on the root of your SD card.
Backup your apps using Titanium Backup.
Open ROM Manager (Downloadable from the market)
Choose "Install ROM from SD card". If after you flash and you have problems like force closes and you can't receive calls, wipe data/cache.
Let the phone sit for 5-10 minutes after booting.
Be happy.
Click to expand...
Click to collapse
That's pretty much how I've done it with all the ROMs I've used for the last couple of months, except that I boot to recovery mode to choose the ROM and start the install.
ok, thanks a lot guys, i spent all my thanks for today, but the conclusion is that i can flash darkys rom on top of phoenix, restoring back to stock will be if i want to take it for warranty or something like that right?
hernan078 said:
ok, thanks a lot guys, i spent all my thanks for today, but the conclusion is that i can flash darkys rom on top of phoenix, restoring back to stock will be if i want to take it for warranty or something like that right?
Click to expand...
Click to collapse
That's my opinion. The install script formats and deletes everything anyway, so going back to stock is superfluous. Some people disagree, but as per my other post, the Darky's instructions say nothing about flashing stock.
I went a couple of months without going back to stock and in that time I flashed various versions of Cognition, Darky's, di11igaf, Assonance, Perception, Axura, Phoenix, Doc's, Serendipity and probably others I've forgotten. I only flashed stock the other day because I sent my phone back to Samsung to see if I can get one with working GPS.
Hi,
I'm researching flashing via CWR, ROM over ROM without flashing to Stock via ODIN. Specifically, I'm at Cog 3.02 with "base" Cognition Kernel/Modem thinking about going to Andromeda...both employ Voodoo/EXT4, so shouldn't need to disable lagfix (I think?)...
I read at this link (apologies for spaces, but I'm new so can't post actual links): h t t p : / / forum.xda-developers.com/showthread.php?t=900463
a spirited debate starting about page 4 that flashing to ODIN is effectively doubling your chances for a bad flash, and that recovering a bad flash via CWM is far easier (just try re-flash again...and again(?) until fail back to trying ODIN) than recovering a bad ODIN flash.
If that's true, what prep should I do first via CWR?
1. Andromeda says requires wipe, does ROM install do this or do I do it via CWR first (wipe data/factory reset in recovery)? How 'deep' is a wipe...what do I need to save prior to this?
2. Wipe Dalvik Cache and/or wipe cache partition?
3. Save /efs folder?
4. Aside from TiBu backup to PC, am I missing anything else to save? I forgot to save my Android ID on my first flash, so it's my understanding I can only get that back via flash to Stock...I'd prefer to only go to ODIN if I have to.
Another question I had was regarding nandroid. I made a nandroid backup right after flashing to Cog. Do I really even need this? Since I haven't changed kernel/modem, wouldn't I be better off just flashing my initial Cog zip file?
Finally thanks to all who make this site kick_ss. Connexion2005's videos are indispensable for a newbie like me. People actually answer questions here, and the Devs suceed in delivering onto us a wolf in (out of the box) sheep's clothing...something AT&T and Samsung have failed to do.
Cognition 3.02 is my first and only custom ROM and DG, you have literally saved me from making my phone a brick the old fashioned way: throwing it against a wall. Running flawlessly since Jan 17th...at the same time, I am eager to see what else is out there, ***safely*** as possible.
Thanks in advance.
Since they are both ext 4 you should be ok.
The rom wipes, I clear davlik cache before flash and after, but there our no good reason as to why
Efs files, do you use kies? If so you may want to back them up, if not don't worry, I have never backed then up
Odin flash is not needed but my opinion is you should know how to use odin prior to flashing. Why panic to figure it out if something goes wrong,?
NANDROID only needed if youare going back to cog and after you have flushed the rom you want to restore settings
I think I got everything you asked
Thank you.
So really just the Dalvik cache wipe in CWR prior to.
Kies...soooo failed ever getting that working, and don't seem to need it.
Yeah I actually flashed ODIN1 unnecessarily prior to my flash to Cog. I was at stock and somehow thought ADW would mess it up...rook. I have build 1006 so good to know ODIN's there if I need it.
Re: Nandroid, but if I kept the initial zip for my flash to Cog wouldn't I just use that? Or does Nandroid do better job of ensuring good flash back to what I have right now?
Not familiar with flushing...Would I be able to restore Nandroid directly on top of ROM I'm switching off of?
Thanks again.
OP,
You'd double the chance of failure if all else were equal. I don't have statistics, but I have no doubt that failures happen far more often with odin flashes, though.
1. Andromeda says requires wipe, does ROM install do this or do I do it via CWR first (wipe data/factory reset in recovery)? How 'deep' is a wipe...what do I need to save prior to this?
2. Wipe Dalvik Cache and/or wipe cache partition?
3. Save /efs folder?
4. Aside from TiBu backup to PC, am I missing anything else to save? I forgot to save my Android ID on my first flash, so it's my understanding I can only get that back via flash to Stock...I'd prefer to only go to ODIN if I have to.
Click to expand...
Click to collapse
The ROM install script does the wipe. This simply means all your apps and data will be erased (your pictures and anything on the internal and any external sdcard will not be deleted).
I never wipe the dalvik cache or cache partition before flashing. I only do that if I'm having issues like FCs (sometimes happens after a bad theme install, for example).
You probably should have backed up /efs before flashing anything, but that's not to say a backup now isn't a good idea. You only need to do this once.
If I recall, you do need to flash 2.1 to get the ID back. I'm not 100% sure there isn't another way.
WRT the nadroid backup, you don't really need it. What I do is keep 2 or 3 good CWM flashable ROMs and the CWM update.zip on my sdcard in case of problems. I also keep TiBU backup of my stuff there (which I also occasionally backup to my PC just in case my sdcard gets wiped for some reason).
One thing I would suggest is to be sure you have working button combos in case you ever need download mode (hopefully you never will, but it's always possible). If you don't have that, there is a clockwork flashable fix or you could just flash cognition or perception once and then flash whatever you want over them (you can do both flashes all without ever leaving recovery). That should fix the button combos since DG's ROMs include a good sbl.bin (I'm not a fan of that inclusion, but it is useful in this case). Since you are running Cog, I assume your download mode is already working.
Thanks opcow.
Yeah I made sure I could get into d/l and recovery mode with button combos before I even rooted.
So would you ever use a Nandroid backup if you added a different kernel/modem to a ROM? Or would you just go back to the initial zip and SGS Kernel to flash kernel/modem? I haven't done kernel flash...yet...
Madtowndave said:
Thanks opcow.
Yeah I made sure I could get into d/l and recovery mode with button combos before I even rooted.
So would you ever use a Nandroid backup if you added a different kernel/modem to a ROM? Or would you just go back to the initial zip and SGS Kernel to flash kernel/modem? I haven't done kernel flash...yet...
Click to expand...
Click to collapse
If the ROM you were running when you backed up is compatible with the new kernel then I don't see why there would be a problem. I don't do it, myself, but I'm not sure why. Maybe it's because I have the paid TiBU and I just use that.
Thanks again...
Yeah I bought full TiBu, so obviously that should work for the apps/data.
Did some more digging tonight and apparently Nandroid backup is ROM only, not Kernel...So seemingly would need to be on same Kernel at least to do proper Nandroid restore.
...that being the case, I guess I don't understand why people stress importance of running a Nandroid prior to and/or post ROM flash...am I missing something?
If you like a rom and set everything up but want to try another doing a nandroid allows you to restore once you flash the rom again.
Also good to run nandroid on new flash, so if you play with themes and something goes wrong you can restore
That makes sense.
Showing me newbie-ness since I haven't played around with themes yet...
...Figured I'd at least get 2nd ROM flash out the shoot before playing with kernels, modems or themes...
This thread is helpful for me. I appreciate your time.
This is along the lines of the question that I was going to post so figured would ask here. I too am considering trying out the new Andromeda. I am currently using Cog 3.04 and want to test out the new Andromeda. The TiBu I have right now is from when i was on stock as I just recently purchased this and Cog was my first flash.. Would i want to continue to use that backup when i flash to andromeda, or would it be better to run a full backup with tibu while cog is on there and then flash to andromeda and use the cog backup??
also,, from above, i could possibly just skip the step with odin and go straight to andromeda? or do I need to run odin and put it back to stock before going over to andromeda?
thanks
zug
Hey Zug,
Just flashed andromeda last night via method outlined above...did not revert to stock at all (no odin). Only issue thus far is market only showing very few installed apps under 'My Apps', but I think this is a common issue. Will research solution tonight (I did have some issues getting back all apps from TiBu, but after I restored missing apps twice and rebooted a few times they all appear to be back). Also my simi clock widget comes and goes, not sure why...might clear dalvik cache to see if that helps.
Regarding TiBu, it saves apps and data. It is not ROM specific...you just back it up, then after you flash new ROM you restore missing apps with data (do NOT restore system data).
EDIT: Resolved the My Apps Market issue (only a few were showing after flash) by going to Settings, Applications, Manage, go to Market, Clear Data, reboot. Search is my friend.
i897 running Andromeda 2.0
Thanks Madtowndave.. i might give that a try.. so, since my phone is rooted and what not, i can just go to the guide and start at the portion about puting the new rom on the sd card, rebooting it and what not in recovery and select that zip and flash it right ? (well condensed version of course) and it should all be good?? guessing if this fails can always use the odin and wipe it and go back?
since i added a few new apps, guessing then that i should use tibu and go ahead and reback up everything since this rom does the master clear and then reload them right?? and hate to ask.. but how do I do the nandroid? newbie still to android and i know that just backs up the rom, but is it a app to dl from market? was fishing around in phone and didnt quite see it yet. .but figured i would do a nandroid in case i want to go back to cog.. this smart?
thnx again
zug
I think most of your questions are answered by others in this thread...
One thing I noticed last night is that I only got red (voodoo) cwm recovery menu via 3 button or long press power and reboot to recovery...when I rebooted to recovery via ROM Manager, I got the green cwm recovery menu. Not sure if this matters, but in another forum (on Vibrant phone, our sgs cousin), they said to flash ROM via the red voodoo cwm menu (since cog and andromeda both employ voodoo you can leave it enabled).
Nandroid backup you can do either from ROM manager or in cwm recovery...
Also andromeda wipes the system data, not a master clear...your data on 16 gig internal memory should not be affected, but is very good idea to backup everything to pc per the flash custom ROM guide.
i897 running Andromeda 2.0
Thanks again madtown.. going to give it a try now.. as andromeda just finished DL'ing
Good luck, hope it goes smooth for you as it seemingly has for me...Feel like a bit of a heretic for not flashing to odin first...maybe I'm just lucky.
i897 running Andromeda 2.0
hmm. ok. .so did the reboot to recovery and installed andromeda.. did it take a tad bit for yours to boot into the phone portion after it got to the andromeda screen?? mine seemed like it was hanging and was about to worry.. but finally booted in.. so figured would see if yours did too? .. gonna test stuff out now and restore tibu
Yeah, did for me too...and yes I was worried. Pretty sure this is very normal on first boot into new ROM in general. Like I said, TiBu was a bit cranky for me and required 2 restores and reboots...
Really enjoying this ROM, btw.
i897 running Andromeda 2.0
yeh.. im still doing the install from tibu (getting paid version after tomorrow since payday since im hating have to select install for every app ) .. and then will reboot and test .. though one thing ive noticed that is diff from the video is the lock screen.. in his review it was the lock button and he swiped it up.. mine is set to a puzzle piece by default?? any idea??
edit.. k mine was a 1st time go for apps restored with tibu .this is pretty nice.. it does appear to be a lot faster/smoother than cog so far.. though the Keep the lights on app should keep my bottom buttons on all the time right? least thats what i thought i was from the video and mine seem to still fade out.. even though i hit the app and it said it was enabled..
changing unlock is in settings, display...
Dunno about lights, mine just worked. Make sure service started and reboot I guess.
i897 running Andromeda 2.0
ok.. that was what it was for the lock part.. thnx .. didnt know that was there for those 4 choices.. thought only could do the none, pattern, pw etc..
everything went fine until i decided to load my contacts/sms etc from tibu.. now when i rebooted to add them, i keep getting the message "Sorry, The application Swype (processcom.swype.android.inputmethod) has stopped unexpectedly.. please try again" constantly getting things like that about swype.. any idea what happened or what i need to do?
edit.. sucked it up and re-flashed ;( will just sync contacts and deal with the ones missing for now ;(
Hi guys, first of all I'm a total noob.. first android phone first time rooting, and installing a mod... I should of done more research before installing the CyanogenMod on my phone because now its all buggy and i feel it worked better before. If some one can help me get my phone back to 2.2 that would great.
-Do i fist install a stock rom from http://forum.xda-developers.com/showthread.php?p=12890619#post12890619
-I'm located in the philippines and I dont see any rom for my country all i remember is that I had v10b.
-im not sure if my phone is using ext3/or ext4 but i think its ext4 since im using cyanogenmod. do i need to set it back to ext3 first?
I backed up my phone using nvflash and nandflash.
-first thing i tried before was: wipe data/factory rest, wipe cache partition, wipe dalvik cache and then hit restore. afterwards i booted my phone and it was stuck at the loading bar. so tried the same steps again but nothing so i loaded cm7 zip again my my phone booted up. how do i take this off can someone help please.
i really dont know what im doing..
Follow this
http://forum.xda-developers.com/showthread.php?t=1007825
it will restore your phone back to stock
after nvflashing v10b back on your phone, you can restore your backup if you like to. root and clockworkmod must be installed first though. To install clockworkmod you can also download the clockworkmod recovery img and replace recovery.img in the nvflash files. this will install cwm directly and you don't need to root your device.
You don't need to convert back to ext3. I'm not even sure if cm7 uses ext4...
The reason why you are not able to restore your backup is because of some bug in cwm with restoring boot.img I think..
oscarlg said:
Hi guys, first of all I'm a total noob.. first android phone first time rooting, and installing a mod... I should of done more research before installing the CyanogenMod on my phone because now its all buggy and i feel it worked better before. If some one can help me get my phone back to 2.2 that would great.
-Do i fist install a stock rom from http://forum.xda-developers.com/showthread.php?p=12890619#post12890619
-I'm located in the philippines and I dont see any rom for my country all i remember is that I had v10b.
-im not sure if my phone is using ext3/or ext4 but i think its ext4 since im using cyanogenmod. do i need to set it back to ext3 first?
I backed up my phone using nvflash and nandflash.
-first thing i tried before was: wipe data/factory rest, wipe cache partition, wipe dalvik cache and then hit restore. afterwards i booted my phone and it was stuck at the loading bar. so tried the same steps again but nothing so i loaded cm7 zip again my my phone booted up. how do i take this off can someone help please.
i really dont know what im doing..
Click to expand...
Click to collapse
same thing had happened with me...
not a sigle CWM bakup working,no other zip working through CWM...
i tried with smartflash as well as with NVflash,but the results were same.
then one of the XDA user from this forum adviced me to use onther usb port(preefrably backside one)
and just repeat the NVflash process and guess what !!!!
finally i have managed to get rid of CM7 !!!! and now m back on v10b !!!
try it out,it should work,cheers
thank you
Thanks for the replies guys ill give it a go right now and let you know what happen.
Kickasskev said:
Follow this
http://forum.xda-developers.com/showthread.php?t=1007825
it will restore your phone back to stock
Click to expand...
Click to collapse
i followed the instructions on that page but when i get to the part where i click on nvflash a black screen like cmd pops up then disappears. i tried running as administrator but no go same thing.. am i missing something?
oscarlg said:
i followed the instructions on that page but when i get to the part where i click on nvflash a black screen like cmd pops up then disappears. i tried running as administrator but no go same thing.. am i missing something?
Click to expand...
Click to collapse
same thing had happened with me...
not a sigle CWM bakup working,no other zip working through CWM...
i tried with smartflash as well as with NVflash,but the results were same.
then one of the XDA user from this forum adviced me to use onther usb port(preefrably backside one)
and just repeat the NVflash process and guess what !!!!
finally i have managed to get rid of CM7 !!!! and now m back on v10b !!!
try it out,it should work,cheers
[CHANGE THE USB PORT AND IT WILL WORK FOR SURE]
hi everyone
i start flash custom roms couple days ago, trying out "temasek's UNOFFICIAL BUILD RC1-94" everything work great, just some of the .apk was not working, so i decide to go back to stock roms, i thought it be simple process restore it backup, but adter it restore LG logo keep boot and restart. so i start reading found this thread i try it out, load it install this zip file,
http://forum.xda-developers.com/showthread.php?t=1021554
now i can't return to recovery menu, and it keep booting and restart, please what can i do now did i brick the phone, i'm so lost right now, please help thanks
after many try and ton of reading, i thought my is total brick, trying out smartflash method also get error when flashing, thank to this post from "75markus " i was able to restore back to 2.2 froyo
http://forum.xda-developers.com/showpost.php?p=25120132&postcount=6
Next time don't forget to flash Back2Ext3 before restoring stock backup
Durio said:
Next time don't forget to flash Back2Ext3 before restoring stock backup
Click to expand...
Click to collapse
Yes - that happened to me also. My first "bad" experience with flashing
from what i read CM7 running ext4, stock runing ext3 right?
so now i'm back with stock running froyo, i still have my backup files on with sd card. Do i root and install rom manager then install Back2Ext3, and final running restore? will this restore back to my original state since i backup using cwm to backup.
thank guy
yes, cm7 uses ext4 system mount. i just use a zip file which i flash from recovery if i need to get back to ext3.
here it is btw if you are on stock froyo and want to restore stock gingerbread (if i understood you right) you dont need to use back to ext3 again, just restore your back up.
phihung07 said:
hi everyone
i start flash custom roms couple days ago, trying out "temasek's UNOFFICIAL BUILD RC1-94" everything work great, just some of the .apk was not working, so i decide to go back to stock roms, i thought it be simple process restore it backup, but adter it restore LG logo keep boot and restart. so i start reading found this thread i try it out, load it install this zip file,
http://forum.xda-developers.com/showthread.php?t=1021554
now i can't return to recovery menu, and it keep booting and restart, please what can i do now did i brick the phone, i'm so lost right now, please help thanks
Click to expand...
Click to collapse
Restore stock backup from CM needs to flash an ext4-backto-ext3 zip with cwm, what a pity you overwrite cwm with stock recovery.
Now you should try to rescue your phone with SmartFlash, finally consider nvflash method.
xilw3r said:
yes, cm7 uses ext4 system mount. i just use a zip file which i flash from recovery if i need to get back to ext3.
here it is btw if you are on stock froyo and want to restore stock gingerbread (if i understood you right) you dont need to use back to ext3 again, just restore your back up.
Click to expand...
Click to collapse
well i notice the froyo firmware is way faster than the GB i have, no lagg at all battery is really good, is there any GB stock rom run smooth without bloatware.... (like international version)
phihung07 said:
well i notice the froyo firmware is way faster than the GB i have, no lagg at all battery is really good, is there any GB stock rom run smooth without bloatware.... (like international version)
Click to expand...
Click to collapse
If you mind, try Django Manouche, Custom but stock based ROM http://forum.xda-developers.com/showthread.php?t=1410662 . I tried many CM and MIUI roms but always ended restoring Django back
I have tried this numerous times still no result.
Cm 10.1.3 works perfectly fine. But once i flash it with my Titanium backup update.zip file. There will be errors, and after i reboot it, it iwll just get stuck at the spinning blue circle. I have tried everything, from apps+data to only app data. Nothing works.
I would have to factory reset and reflash it again.
I use clockworks mod recovery.
My phone is a odin rooted Galaxy S3 Lte (i9305)
Shinny123 said:
I have tried this numerous times still no result.
Cm 10.1.3 works perfectly fine. But once i flash it with my Titanium backup update.zip file. There will be errors, and after i reboot it, it iwll just get stuck at the spinning blue circle. I have tried everything, from apps+data to only app data. Nothing works.
I would have to factory reset and reflash it again.
I use clockworks mod recovery.
My phone is a odin rooted Galaxy S3 Lte (i9305)
Click to expand...
Click to collapse
use recovery to flash roms not TB, its much more reliable.. i think the problem is because of apps and data you trying to restore with the update.zip. i know you use tb because you want to restore your apps+data easily while flashing new rom, but tb seems to give problems with this method
MaHo_66 said:
use recovery to flash roms not TB, its much more reliable.. i think the problem is because of apps and data you trying to restore with the update.zip. i know you use tb because you want to restore your apps+data easily while flashing new rom, but tb seems to give problems with this method
Click to expand...
Click to collapse
Nah, i didnt flash my rom with tb, i flashed it with recovery. Then once everything was done, i would go back into recovery and flash the update.zip file
Shinny123 said:
Nah, i didnt flash my rom with tb, i flashed it with recovery. Then once everything was done, i would go back into recovery and flash the update.zip file
Click to expand...
Click to collapse
yes i see, but that seems to be the problem ''restoring apps, data with tb'' and from what i know it occurs that this sometimes gives errors, fc's and bootloops like in your case
MaHo_66 said:
yes i see, but that seems to be the problem ''restoring apps, data with tb'' and from what i know it occurs that this sometimes gives errors, fc's and bootloops like in your case
Click to expand...
Click to collapse
So is there no way to go through with this? Maybe export my backups to another software or something? or am i supposed to start fresh?
Shinny123 said:
So is there no way to go through with this? Maybe export my backups to another software or something? or am i supposed to start fresh?
Click to expand...
Click to collapse
you could try to export your backups (only data) to pc temporary and after having flashed the rom with full wipe, install the apps again and put the backups manually in corresponding directories and see how that is gonna work out. I gave up on TB because of this problem and usually i always start fresh with new flashed roms. I only put my personal files on pc and put it back manually after rom install.
MaHo_66 said:
you could try to export your backups (only data) to pc temporary and after having flashed the rom with full wipe, install the apps again and put the backups manually in corresponding directories and see how that is gonna work out. I gave up on TB because of this problem and usually i always start fresh with new flashed roms. I only put my personal files on pc and put it back manually after rom install.
Click to expand...
Click to collapse
Thanks so much, I dont really need all my apps to be backed up, just important ones, has the manual method worked out for you?
Shinny123 said:
Thanks so much, I dont really need all my apps to be backed up, just important ones, has the manual method worked out for you?
Click to expand...
Click to collapse
yes, most of the times works fine but cant guarantee it will work with every app, i guess has something to do with permissions i.m.h.o