It seems after I flashed supernova anytime I go into rom manager and try to reboot to recovery I get this whole update media deal and than it says fail and i get stuck on the captivates regular recovery.I can't click reboot or anything it only lets me scroll. The only way I have been able to solve this is by pulling the battery then it'll boot into recovery. Anyone else experiancing this.
Sent from my Supernova laced Captivate using XDA App
1meanrex said:
It seems after I flashed supernova anytime I go into rom manager and try to reboot to recovery I get this whole update media deal and than it says fail and i get stuck on the captivates regular recovery.I can't click reboot or anything it only lets me scroll. The only way I have been able to solve this is by pulling the battery then it'll boot into recovery. Anyone else experiancing this.
Sent from my Supernova laced Captivate using XDA App
Click to expand...
Click to collapse
yeah....i fixed mine by not using ROM manager.....
1meanrex said:
It seems after I flashed supernova anytime I go into rom manager and try to reboot to recovery I get this whole update media deal and than it says fail and i get stuck on the captivates regular recovery.I can't click reboot or anything it only lets me scroll. The only way I have been able to solve this is by pulling the battery then it'll boot into recovery. Anyone else experiancing this.
Sent from my Supernova laced Captivate using XDA App
Click to expand...
Click to collapse
This is more than likely due to the lagfix which changes the file system from rfs to ext4, currently ROM Manager cannot see ext4 properly.
Just adding my two cents but you really should never use rom manager for anything. It is outdated and pointless now. Hold down the power button and select recovery to get into recovery mode or use the button method.
Sent from my SGH-I897 using XDA App
Same thing happened to me after flashing from Cog 3.04 to Serendipity.
After a little searching I came accross this link in the Serendipity thread for resolution if you need to boot into recovery mode from Rom Manager:
http://forum.xda-developers.com/showthread.php?t=909213
As others have mentioned, when I select Recovery mode from the Power menu I get into Clockwork Recovery without a battery pull.
Hello,
I've got a new captivate something like a week ago.
I got it with preception 10.4 rom and speed mod kernel and android 2.2.1.
The phone works very fast and I'm satisfied with the speed but the battery is draining very fast.
for example, yesterday I charged the battery and went to a friend, I pictured some photos, filmed a short video (1 minute), played a little game and after 5 hours the battery was 70%, I went to sleep and after something like 9-10 hours when I woke up the battery was 27%! Without using the phone!!
Is it normal?
And for my other questions:
1. How can I know if I have the lagfix enabled?
2. Is it good to upgrade to the official version of AT&T 2.2? Some people told that this is faster.
3. If I will change the rom should I be worried of the sim free unlock (that it will lock again)?
4. What are the best rom and kernel that will be fast and will have battery saving?
Thanks!
Elad92 said:
Hello,
I've got a new captivate something like a week ago.
I got it with preception 10.4 rom and speed mod kernel and android 2.2.1.
The phone works very fast and I'm satisfied with the speed but the battery is draining very fast.
for example, yesterday I charged the battery and went to a friend, I pictured some photos, filmed a short video (1 minute), played a little game and after 5 hours the battery was 70%, I went to sleep and after something like 9-10 hours when I woke up the battery was 27%! Without using the phone!!
Is it normal?
And for my other questions:
1. How can I know if I have the lagfix enabled?
2. Is it good to upgrade to the official version of AT&T 2.2? Some people told that this is faster.
3. If I will change the rom should I be worried of the sim free unlock (that it will lock again)?
4. What are the best rom and kernel that will be fast and will have battery saving?
Thanks!
Click to expand...
Click to collapse
I'm not too familiar with the Cognition ROM's. But I might take a look at WiFi, or you may have a app thats running in the background causing the drain. Do you have wifi or gps on all the time?
1. It was probably enabled by default. A really easy way is open File Explorer, go to your "Voodoo" folder, open it if there is a folder named "disable-lagfix", then your lagfix is not enabled. If you want to enable it, delete the "disable-lagfix" folder and reboot
2. I wouldn't waste my time with stock 2.2. Most all of the modded ROM's here are going to be better
3. I'm not familiar with that issue, never had it happen for myself
4. That is a hard question to answer, most of the Captivate devices are going to respond to a ROM/Kernel, a little bit differently. For example, my device LOVES Supernova JS5, where as your device might not run quite right on it. So my advice is to try it, if it works for you, use it. Read the threads, find a ROM that you think has really great support, so if you run into issues you can find help. Zelendel has posted in the Q&A section, threads for some of the more popular ROM's for the newer folks who get stuck
Voltage control App/RC6 and 1400 Kernel
I am currently running RC6 on my captivate with the 1300 kernel. I have no issues using and adjusting voltage control app with this set up. However, as soon as I try SGS kernel flasher and flash 1344 kernel or the 1400 kernel voltage control app begins to force close. I have removed and added back in with the same result. I am very happy with my set up, but would like to benchmark the other two. Any help would be appreciated. Thanks.
kangi26 said:
I'm not too familiar with the Cognition ROM's. But I might take a look at WiFi, or you may have a app thats running in the background causing the drain. Do you have wifi or gps on all the time?
1. It was probably enabled by default. A really easy way is open File Explorer, go to your "Voodoo" folder, open it if there is a folder named "disable-lagfix", then your lagfix is not enabled. If you want to enable it, delete the "disable-lagfix" folder and reboot
2. I wouldn't waste my time with stock 2.2. Most all of the modded ROM's here are going to be better
3. I'm not familiar with that issue, never had it happen for myself
4. That is a hard question to answer, most of the Captivate devices are going to respond to a ROM/Kernel, a little bit differently. For example, my device LOVES Supernova JS5, where as your device might not run quite right on it. So my advice is to try it, if it works for you, use it. Read the threads, find a ROM that you think has really great support, so if you run into issues you can find help. Zelendel has posted in the Q&A section, threads for some of the more popular ROM's for the newer folks who get stuck
Click to expand...
Click to collapse
Thank you very much!
I enabled the lag fix, not seeing a big improvement.
I will try to find a new rom because I can't continue with this battery.. draining like water!
1. Another questions, does a rom comes with a kernel or should I need to flash kernel too?
2. What mode does the phone need to be when I connecting it to computer to flash a rom?
3. What are this JXX all about?
4.If I am flashin to stock rom, how will it know to flash to 2.2 or it doesn't matter because the new rom is 2.2?
5. Does flashing to stock rom unroot my phone?
6. Do I need to disable lagfix before flashing new rom? If so how do I do it? just copying the disable-lagfix file back to the Voodo folder?
lol a lot a questions, but I'm sure you'll forgive me
Elad92 said:
Thank you very much!
I enabled the lag fix, not seeing a big improvement.
I will try to find a new rom because I can't continue with this battery.. draining like water!
1. Another questions, does a rom comes with a kernel or should I need to flash kernel too?
2. What mode does the phone need to be when I connecting it to computer to flash a rom?
3. What are this JXX all about?
4.If I am flashin to stock rom, how will it know to flash to 2.2 or it doesn't matter because the new rom is 2.2?
5. Does flashing to stock rom unroot my phone?
6. Do I need to disable lagfix before flashing new rom? If so how do I do it? just copying the disable-lagfix file back to the Voodo folder?
lol a lot a questions, but I'm sure you'll forgive me
Click to expand...
Click to collapse
Ok, here we go.
1. All of the ROM's come with modems and kernels
2. I would be flashing back to stock 2.1 and Master Clear before flashing a new ROM. After that is done, to flash to a custom ROM, you will be in Recovery Mode
3. The J** is, for lack of a better term, the build number. The farther down the alphabet you go the newer the release. The newest at this time is JS5.
4. When you flash to stock you'll use Odin which has stock 2.1 JF6 built in. You can get it here: http://www.mediafire.com/?0w2y31maz8mdom4 If you're going to a custom ROM, I wouldnt mess with the new Stock 2.2
5. Yes
6. I would. All you need to do(for Voodoo lagfix) is, open a File Explorer, go to your Voodoo folder and create a folder named disable-lagfix then reboot the phone
There is no reason to flash back to stock and master clear. It used to be a bigger deal but now they are all compatable. The only thing you might want to do is clear the dalvik cache in the advanced cmw menu in the recovery mode. I havent done any of this for about a month and after flashing over 10 roms im still seeing no problems.
Sent from my SAMSUNG-SGH-I897 using XDA App
Dupontrocks11 said:
There is no reason to flash back to stock and master clear. It used to be a bigger deal but now they are all compatable. The only thing you might want to do is clear the dalvik cache in the advanced cmw menu in the recovery mode. I havent done any of this for about a month and after flashing over 10 roms im still seeing no problems.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Thats probably true for you, but for the beginner it's the safest route to take. It is THE safest way to do it. The chances of things getting messed up are lessened
Elad, Check your PM
kangi26 said:
Ok, here we go.
1. All of the ROM's come with modems and kernels
2. I would be flashing back to stock 2.1 and Master Clear before flashing a new ROM. After that is done, to flash to a custom ROM, you will be in Recovery Mode
3. The J** is, for lack of a better term, the build number. The farther down the alphabet you go the newer the release. The newest at this time is JS5.
4. When you flash to stock you'll use Odin which has stock 2.1 JF6 built in. You can get it here: http://www.mediafire.com/?0w2y31maz8mdom4 If you're going to a custom ROM, I wouldnt mess with the new Stock 2.2
5. Yes
6. I would. All you need to do(for Voodoo lagfix) is, open a File Explorer, go to your Voodoo folder and create a folder named disable-lagfix then reboot the phone
Click to expand...
Click to collapse
Thank you, you're great.
About the mode I meant USB debugging or something like this.
How do I do this master clear?
About odin and all of this, when I will flash my rom I will use the captivate toolbox (http://forum.xda-developers.com/showthread.php?t=944418) so I think it will do it automatically. I want to do everything safe and I think this program is a great way to start.
Especially after I tried to backup my current rom using rom manager and it got me to recovery mode but the ok key button wasn't working, so I had to pull out the battery :S
Elad92 said:
Thank you, you're great.
About the mode I meant USB debugging or something like this.
How do I do this master clear?
About odin and all of this, when I will flash my rom I will use the captivate toolbox (http://forum.xda-developers.com/showthread.php?t=944418) so I think it will do it automatically. I want to do everything safe and I think this program is a great way to start.
Especially after I tried to backup my current rom using rom manager and it got me to recovery mode but the ok key button wasn't working, so I had to pull out the battery :S
Click to expand...
Click to collapse
I have never used the Captivate Toolbox, so I can't give you any advice on it
Take a look at you PM, see if that'll work for you
Elad92 said:
Thank you, you're great.
About the mode I meant USB debugging or something like this.
How do I do this master clear?
About odin and all of this, when I will flash my rom I will use the captivate toolbox (http://forum.xda-developers.com/showthread.php?t=944418) so I think it will do it automatically. I want to do everything safe and I think this program is a great way to start.
Especially after I tried to backup my current rom using rom manager and it got me to recovery mode but the ok key button wasn't working, so I had to pull out the battery :S
Click to expand...
Click to collapse
In recovery, the power/lock button is the ok button.
Sent from my CM7 powered captivate
sixstringsg said:
In recovery, the power/lock button is the ok button.
Sent from my CM7 powered captivate
Click to expand...
Click to collapse
I successfully installed serendipity rom with the help of kangi!
But I have a problem, when I want to enter CWM with rom manager I press "Reboot into Recovery" in the rom manager app and it reboots my phone and get me to the phone recovery (3e) and says that something was faild and I can't use the ok button because it doesn't working.
I have to pull out my battery and then turn the phone on again and then it gets me to CWM.
What is the problem? there's another way?
I don't think that pulling the battery like this is very healthy for my phone.
Elad92 said:
Thank you, you're great.
About the mode I meant USB debugging or something like this.
How do I do this master clear?
About odin and all of this, when I will flash my rom I will use the captivate toolbox (http://forum.xda-developers.com/showthread.php?t=944418) so I think it will do it automatically. I want to do everything safe and I think this program is a great way to start.
Especially after I tried to backup my current rom using rom manager and it got me to recovery mode but the ok key button wasn't working, so I had to pull out the battery :S
Click to expand...
Click to collapse
The captivate toolbox is an awsome program.
When you use it to flash a rom, it will push clockwork recovery onto the phone for you. just follow the instructions and you will be fine.
A few notes on the toolbox and Odin3,
you must have the samsung drivers installed on your computer, they take forever to install on my computer.
generally speaking, you will not need to use the 3button unless you flash someting like darky's extreme, and his instructions are very clear.
turn on debugging mode in settings/applications/development.
plug in the phone
click "flash to stock," use the one click and follow in the instructions.
let the phone fully reboot and go into sync mode, a minute later, the blue odin box will turn green and say "PASS."
Unplug the phone, turn debugging mode on again
plug in the phone, and when odin sees the phone (window will turn yellow) hit "master clear."
let the phone fully reboot again into sync mode
turn debugging mode on again
click root phone and follow the directions
If you want to open odin3, just click flash to stock with your phone unplugged and click which ever odin3 you want and it will open. This is very usefull if you want to use odin3 without the tool box.
After you flash the ROM, reboot in recovery and if you dig arround in the menus, you should see stuff about lagfix options and lagfix tweaks. make sure lagfix is enabled, if your not sure enable it and reboot into recovery. many roms install with lagfix not enabled, so yuo should always do this. once it changes the file system and reboots into recovery, go into tweaks and enable everything that has an (R) next to it. reboot and enjoy
Elad92 said:
I successfully installed serendipity rom with the help of kangi!
But I have a problem, when I want to enter CWM with rom manager I press "Reboot into Recovery" in the rom manager app and it reboots my phone and get me to the phone recovery (3e) and says that something was faild and I can't use the ok button because it doesn't working.
I have to pull out my battery and then turn the phone on again and then it gets me to CWM.
What is the problem? there's another way?
I don't think that pulling the battery like this is very healthy for my phone.
Click to expand...
Click to collapse
lol pulling the battery isnt the greatest thing to do.. but it shouldn't hurt it as long as its at one of those type of screens. If you were to pull it say.. doing a restore - that would be a fatal no-no.
Um.. if you have ROM MANAGER on your phone already it should have an "update.zip" that has all of the recovery advanced options in it.
Especially with Serendipity if you want to get into Recovery just hit the power button and click on Recovery - it will put you into the CWM recovery mode.
Elad92 said:
I successfully installed serendipity rom with the help of kangi!
But I have a problem, when I want to enter CWM with rom manager I press "Reboot into Recovery" in the rom manager app and it reboots my phone and get me to the phone recovery (3e) and says that something was faild and I can't use the ok button because it doesn't working.
I have to pull out my battery and then turn the phone on again and then it gets me to CWM.
What is the problem? there's another way?
I don't think that pulling the battery like this is very healthy for my phone.
Click to expand...
Click to collapse
With a custom ROM installed, most of the newer ones have a Extended power menu, press and hold the power button for a couple of seconds, let it go and it'll give the option for Recovery. Personally, after stock JF6, I dont have any need for ROM Manager anymore
Try to enter Recovery that way first, don't use ROM Manager, if that doesn't work, I would put the "update.zip" back on your phone, and try to re-install it again. Something may have hosed on you
Got it. Thanks everybody
FROYO4ME;11871783 as soon as I try SGS kernel flasher and flash 1344 kernel or the 1400 kernel voltage control app begins to force close. I have removed and added back in with the same result. [/QUOTE said:
BUMP - same issue here, but with Serendipity 6.2 ROM and paragon6-1400-100hz-0215-2245-cwm.zip kernel
Click to expand...
Click to collapse
I was wondering about updating to stock 2.2 but it wouldn't make sense, all the Roms here have got it already and they work good and have had all the bugs fixed (well most).
Sent from my SAMSUNG-SGH-I897 using XDA App
FIXED: Voltage Control app force close FC on Paragon RC6 1400 kernel
RashaMatt said:
BUMP - same issue here, but with Serendipity 6.2 ROM and paragon6-1400-100hz-0215-2245-cwm.zip kernel
Click to expand...
Click to collapse
ISSUE: Voltage Control app FC's on start in Paragon RC6 1400 kernel.
This is related to having previously installed the Paragon 1300 kernel (and the VC app was working there). I forgot to delete the OC/UV settings before flashing the 1400 kernel
FIXED: These steps may not ALL be necessary, but this is what I did, and it fixed the issue for me:
Uninstall Voltage Control app with TiBu
Delete /etc/init.d/S_volt_scheduler and /etc/init.d/S90scheduler (use Root Explorer or adb shell su)
Boot to CWM recovery
Delete cache and Dalvik cache
Re-flash Paragon RC6 1400 kernel ONLY (not the ROM) - paragon6-1400-100hz-0215-2245-cwm.zip
BTW I'm running Serendipity 6.2 ROM, and it's a beeautiful ride with this kernel
HTH
Big PROBLEM. Everything was great with the Rom and overclocked kernel. Then the force close acore happened so much, i thought i would perform a restore. But did it through Rom Manager instead of CW recovery. Well Rom Manager threw me into the original android recovery? and it will not allow me to do anything. I get the white triangle with exclamation, when i touch the home button it gos to the Android sytem recovery screen instantly, but does not allow any functions. Push and hold power off is all that works. Then reboots to the same exclamation. I tried flashing both the Khasmek kernel and rom via Heimdall, which reports succuess, but im am still at the same exclamation. Am i bricked?
rspong said:
Big PROBLEM. Everything was great with the Rom and overclocked kernel. Then the force close acore happened so much, i thought i would perform a restore. But did it through Rom Manager instead of CW recovery. Well Rom Manager threw me into the original android recovery? and it will not allow me to do anything. I get the white triangle with exclamation, when i touch the home button it gos to the Android sytem recovery screen instantly, but does not allow any functions. Push and hold power off is all that works. Then reboots to the same exclamation. I tried flashing both the Khasmek kernel and rom via Heimdall, which reports succuess, but im am still at the same exclamation. Am i bricked?
Click to expand...
Click to collapse
Can you get into download mode??? if so you not bricked.. voodoo mod was very glitchy for me, when i flashed overcome rom to my verzion tab.. i couldnt wipe anything i got that same screen with the triangle and not matter what i was doing it would go back voodoo cmw options then triangle. so finally i reflashed back to stock then booted into original recovery and wiped from there, both data and cahce. i was able to boot back up into android, from there i reflashed voodoo recovery and oc kernel and then was finallly able to use my nandroid back up.
stay away from rom manager, just power down the device to get into recovery or download mode. with the device off hold down power button and volume down button and yellow triangle should appear then flash back to stock... your gonna have to reboot into recovery after stock flash, and wipe both data and cache this should get you back up and running.
Its just getting ugly. Wont even power down. when i push and hold power off, just turns back on into the triangle exclamation, again, touch the home button and im in stock recovery screen with the exclamation still on that screen too. I can scroll up and down with volume, but when i push power to select nothing happens. Yes, i can get into download, like i said, ive reflashed everything successfully, according to heimdall, but nothings changed, just boots back into triangle page.
well,
i got lucky this time. found the original vzw files and installed them via heimdall. Seems to have taken me past the problem. Wow, that was scary
rspong said:
well,
i got lucky this time. found the original vzw files and installed them via heimdall. Seems to have taken me past the problem. Wow, that was scary
Click to expand...
Click to collapse
yea man i got freaked out too.. i had the same problem with powering down, i just kept holding the power button down finally it shutdown.did u get the msg saying back button is disabled. then a few seconds later back button is enabled, while in voodoo recovery?? how did u make out with the nandroid backup?? i got my to work after reflashing back to stock and then reflashing v3 kernel and vooodoo recovery..
Khasmek has a thread for the rom.. why not just post in there? This if not there would belong in q&a
rspong said:
well,
i got lucky this time. found the original vzw files and installed them via heimdall. Seems to have taken me past the problem. Wow, that was scary
Click to expand...
Click to collapse
Where did you find the vzw files? Can you send them to me?
Sent from my Droid using XDA App
NomaSS said:
Where did you find the vzw files? Can you send them to me?
Sent from my Droid using XDA App
Click to expand...
Click to collapse
Nevermind google found it sorry :/
Sent from my Droid using XDA App
NomaSS said:
Nevermind google found it sorry :/
Sent from my Droid using XDA App
Click to expand...
Click to collapse
Google found them WHERE? I've been searching for hours. I need original VZW VCast files back so ECO2 script won't crash when it tries to update them.
Update... I never did find the VZW files with Google Search, but the fix here in this thread restores everything back to stock including all the VZW bloatware. The fix works like a charm, by the way, for completely restoring the Tab back to stock.
I was just messing around and discovered I can put my Captivate in safe mode. I did so by holding down the Menu button when the boot animation starts. When in safe mode my app drawer only shows the apps my Rom came with. When i go to manage apps all the apps I have installed are there. and i can uninstall them. Does this have any real value? I am running FireFly 2.7.
Oh snap!! I have never noticed that before, I just tried it, same rom sp-voodoo #12 kernel and sure enough safe mode. This would be super handy if say you intalled an app that was somehow causing bootloops or constant force closes, you could use the safe mode to bypass that app and uninstall it so you can boot normally. I will for sure remember this little trick.
Has anyone else used this for anything?
Not used it, but it does work on Continuum v4 (but it made my clock widget disappear) w/suckerpunch-voodoo#11 and jpg modem.
Sent from my GT-I9000 using XDA App
Howdy all. I've been playing with my wife's captivate and it's rooted with a custom ROM. Whenever I go to put it into clockwork recovery mode I need to do a battery pull. For example, I just did a rom backup (through ROM Manager) and in order to back up the rom, it enters boot mode and freezes, I do a battery pull then hit the power button and it goes right into clockwork recovery and runs normally. It happened when i was putting on a custom ROM also. Any ideas?
Another issue I have with the phone is that it seems that the backlight has a minor short, it tends to flicker a bit. is that common for the captivate? Should I restore and return?
thanks!
I would suggest not using rom manager and go into recovery with the button combos, adb, advanced power menu, etc and do your backup from there.
I haven't really had a problem with the flickering personally but it could be a bad flash. What rom are you running?
Sent from my GT-I9000 using XDA Premium App
I see by your previous posts you can read the stickies in the rapheal section. Why not read them here.
First are you sure the 4 lights at the bottom are flickering? Or are they turning on/off for a while? My guess is that whatever rom your on has bln activated (backlight notification) and you have a missed call, text, or something else that is turning them on and off. See if you have the BLN APP installed and disable it to see if it is what was causing it.
Sent from My KickAss Captivated CM7 OC'd 1.5Ghz/Undervolted