Related
Good Day,
Let me start by saying that I had tried to post this under a thread in the development section, but was denied as I am a new member.
I require some advice regarding a bricked Samsung Galaxy Tab.
The unit will not boot or enter download mode, only the navigation icons at the base of the device light up and turn off when holding the power button for a short period of time. My PC chimes as though it can see the device, yet does not show up in "my computer".
Odin sees the device, but hangs during flash attempts at "SetupConnection".
After reading the thread regarding unbricking your Galaxy Tab, I was unable to determine the nature of this particular "bricking".
The device entered this state after I had attempted to flash the device with the new Gingerbread update which downloaded from SamFirmware.com. This was not my first flash on this device, as I had the new version of the Overcome ROM installed, and was attempting to bring the device back to stock firmware for my region.
Any help would be greatly appreciated.
Thanks.
Put the tab to the wall socket and charge it for a few hours. Shutdown your pc and unplug it. Once the tab has charged. Connect to the PC and attempt to flash a decent stock firmware like overcome's stock safe. Good luck.
DarkPal said:
Put the tab to the wall socket and charge it for a few hours. Shutdown your pc and unplug it. Once the tab has charged. Connect to the PC and attempt to flash a decent stock firmware like overcome's stock safe. Good luck.
Click to expand...
Click to collapse
Thank you for the quick reply,
I have had the tab charging via the wall charger for some time now. Will there be an indication as to when it would be advisable to try the flash ie: the device's current boot behavior will change...
And your instruction to shut down my PC and unplug it, unplug the PC?
Can you give me any indication as to what has happened here? For future knowledge... and will my inability to reach download mode restrict my success rate on resurrecting my BRAND NEW TAB ... LOL!!
Thank You DarkPal
Well your bootloaders arent screwed up as the tab is showing signs of life and is detectable in ODIN. Unless in a faaar fetched case of another hardware failure your tab firmware is corrupted. I asked you to unplug the PC to reset the USB host controllers (recommended in case there is a connectivity issue with usb).
Try to put the tab in download mode again after its been sufficiently charged and connect to pc then flash a decent stock firmware like overcome's stock safe.
Did the trick,
Thank you for this. Overcomes stock safe installed and running.
I do have an unrelated question when it comes to modem choice, and noticed that you authored the modem list in the dev section for these devices.
I am having some issue getting 3G connection, and cannot pinpoint if this is a firmware issue or modem issue.
I am in Canada on the Fido network, running GT-P1000
Can you suggest a modem?
Depends on what bands your network supports. I dont reside in Canada so I wouldnt know maybe someone else using fido can help? In most general terms the JPZ modem works for most GSM networks give it a shot first. If fido is an 850 band network consider JJ3 modem.
Thank you
I am very happy to post that I have resolved my issue regarding the lack of connectivity in my region.
It was in fact a modem issue.
I found the solution on this page
http://forum.xda-developers.com/showthread.php?t=847273
I followed the instructions on that thread to test the modem under the ROM prescribed there... it worked on all available bands in my region, and proceeded to use just the modem along with the overcome ROM, and again success.
I am attaching the modem for any other Canadian Fido users encountering this problem. Hope it I can pay it forward.
Thank you again for all you help.
Great support structure here at XDA!!
I had the same problem with only the navigation buttons flashing but i could still get it to connect as a composite device for heimdall after flashing stock safe I can get back to recovery but I get errors nd failures when I try to wipe data/cache its a Verizon grab seven inch black if that matters I got the files from stock safe all but a recovery file and I used my own modem and tried again with one of the stock safe modems is the modem my problem? When I reboot device I go into a boot loop where it says Samsung and it used to say Verizon instead can u help me please?
Which stock safe you are talking about.
I hope not GB stock safe v5 from overcome site. That is a gsm rom, not for cdma.
Sent from my GT-P1000 using XDA
Yes..... i did.......um can u post a download link to the one I need plz? Like I said before I'm using a regular American Verizon version
Edit: OK I found a heimdall one click method that restored it but it restored it to a 2.2 I was on 2.3.5 and all this started trying to get to 4.0.3 so can I get ice or do I need to stay with gingerbread and if so how do I upgrade back to it if my tab is unlocked?
OK so I found a one click heimdall that restored it to a rooted unlocked 2.2 it was a 2.3.5 but this all started trying to get it to a 4.0.3 any suggestions on doing that?
OK I found a heimdall one click method that restored it but it restored it to a 2.2 I was on 2.3.5 and all this started trying to get to 4.0.3 so can I get ice or do I need to stay with gingerbread and if so how do I upgrade back to it if my tab is unlocked?
---------- Post added at 08:45 AM ---------- Previous post was at 08:38 AM ----------
OK so I flashed in cwm to miui and it put me up to 3.2.7 I did flash a cm9 zip that put me up to 4.0.1 but I had no Wi-Fi or network but anyways I'm on mini and it took my root away if I clash the stock+ root vanilla won't it just kick me back off over mini to stock? I don't see any other roof methods or forums about this so if u could tell me where I should post this q I will sorry for posting in the wrong thread I just figured I'd post it here with my other question tyvm
http://forum.xda-developers.com/showthread.php?t=1585619
The guide to ICS for cdma tab using jt1134's rom.
Good luck.
Sent from my GT-P1000 using XDA
Hi
My phone suddenly stopped detecting all sim cards ( I have tried various working sims ).
It is running CM 7.2 and has been running cm 7.2 for a few months with no problems.
Today I took out the sim and put it back in to reboot, all was fine. I went to shower, came back and the sim suddenly stopped being detected.
I have tried to google but it seems most problems are to do with flashing a new rom and having the sim not work, my case is that the rom has been the same for a few months.
I have tried to flash different roms and I still have the same problem. I have a gut feeling it is the hardware that reads the sim that is faulty.
I have read something about a baseband, I dont know what that is but if it helps, when i go to the settings and click on 'about phone'
It says there is a baseband and it is version something. There are no question marks or anything like that.
I appreciate the help and would love some more troubleshooting suggestions.
The worst case scenario is unrooting it, flashing stock rom and send it back to warranty. I actually don't know how to do that so if anyone has a guide lying around please link me on that.
I have similar problem with new boot loader.
Download getril app from play store and see if your baseband is OK. If not, download and flash matching baseband from development thread. You will loose all personal data and your apps after flashing. Then download new ril with getril and reboot. Good luck...
This method was no helpful for me. Maybe you will have better luck.
Sent from my LG-P990 using xda app-developers app
asmerito said:
I have similar problem with new boot loader.
Download getril app from play store and see if your baseband is OK. If not, download and flash matching baseband from development thread. You will loose all personal data and your apps after flashing. Then download new ril with getril and reboot. Good luck...
This method was no helpful for me. Maybe you will have better luck.
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the reply,
When I first opened getril, it said RIL not found, I did not have one. I downloaded one and then it said RIL does not match. I then redid it on another firmware and it now says RIL and Baseband matches. Is this enough? The only weird thing is the baseband has canada and europe in it. I am from Australia. How do i tell which baseband/ril I need?
cimore000 said:
Thanks for the reply,
When I first opened getril, it said RIL not found, I did not have one. I downloaded one and then it said RIL does not match. I then redid it on another firmware and it now says RIL and Baseband matches. Is this enough? The only weird thing is the baseband has canada and europe in it. I am from Australia. How do i tell which baseband/ril I need?
Click to expand...
Click to collapse
First you flash BB, then download RIL with GetRil. Read completely through BB sticky topic in development section. All answers are there.
http://forum.xda-developers.com/showthread.php?t=1658047
[Baseband][P990] Complete Baseband overview thread
Sent from my LG-P990 using xda app-developers app
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Custom40 said:
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Click to expand...
Click to collapse
I checked the IMEI and it matches.
I have some extra information if it helps, when I choose a random RIL from getril, the battery might become a ? mark and the sim card not detected error doesnt show anymore, however when I put it back to the original RIL, my battery bar starts showing the 'power left' and also the sim not detecting error shows again.
Custom40 said:
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Click to expand...
Click to collapse
I get the SIM Toolkit Incompatible Handset error and then whether I press OK or Cancel, shortly after I lose mobile network access. I've been trying all manner of different things, Smart Flashing, NVflashing, changing basebands, Rils, you name it.
I'm currently on the V30B root ROM http://forum.xda-developers.com/showthread.php?t=2064793 and the Ril matches the baseband from that ROM, but that hasn't helped either. So I went and check the in phone and behind battery IMEI and they are different! I'd love to hear what your solution to this is!
Custom40 said:
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Click to expand...
Click to collapse
My problem was no service and IMEI unknown... Never managed to solve it. Reverted to old bootloader and problem solved.
Sent from my LG-P990 using xda app-developers app
IMEI Solution
If IMEI does NOT match, you will need to do this:
Check if you can get in a menu by typing 1809#*990#. If you can't, you will need to use a GB ROM (I remember I used Homero's GB NVFlash as I was on ICS bootloader and couldn't get access to it on ICS). Follow these steps if you are sure you can get into the menu:
1) Connect your phone by USB.
2) Enter 1809#*990# in dialer.
3) Select Port Setting -> Select CP USB
4) Install a program called Hyperterminal on your PC and open it. In COM settings select same port as in device manager -> LGE Mobile USB Seial Port (should be 115200)
5) Type at%imei and it should respond by saying OK
6) Now type at%imei and it should now display your current IMEI number.
7) Type at%imei=XXXXXXXXXXXXXXX where X is your original IMEI number.
8) Reset phone.
You might have to reboot your phone after step 3. But see if it works without.
I have been thinking that this is a hardware issue, I have not changed a single setting/rom/baseband at all, the sim just wasnt detecting when I came back to my phone. The rom and settings were the same for a number of months.
I am now going to give it in to warranty, however it only has 1 month left. I have tried to install the stock firmware but with no luck..
I found a rom to flash for my region, it is a zip file but when I try flash it with Clockworkmod, it says installation aborted....
Shouldnt I be able to flash the roms with CWM? The file is a zip file just like the CM7.2 rom I flashed. Do I need nvflash instead? I found the rom here :
http://forum.xda-developers.com/showthread.php?t=1852112 (the download links were removed so I googled the exact same rom)
I was also told that if I just use the LG update tool, it sohuld automatically update the phone to stock firmware AND unroot it, only that the update tool gives me an error. Whats the best approach guys?? I need to get this fixed before my warranty goes.
Custom40 said:
If IMEI does NOT match, you will need to do this:
Check if you can get in a menu by typing 1809#*990#. If you can't, you will need to use a GB ROM (I remember I used Homero's GB NVFlash as I was on ICS bootloader and couldn't get access to it on ICS). Follow these steps if you are sure you can get into the menu...
Click to expand...
Click to collapse
Bother. The 1890 etc didn't work on the p990 in android 4.0.4 (nor on my Nexus 4 incidentally), so I guess I'll have to flash down to GB. I'll let you know if I can get it to work, thanks!
[-Stash-] said:
Bother. The 1890 etc didn't work on the p990 in android 4.0.4 (nor on my Nexus 4 incidentally), so I guess I'll have to flash down to GB. I'll let you know if I can get it to work, thanks!
Click to expand...
Click to collapse
Trust me, you can try whatever you want. This is the only way to get it working. I spent hours and hours to figure this out, so I guarantee you it will work.
please,please can u explain better, my imei and baseband is not showing in setings in my phone., i wanted to downgrade into gingerbread stock rom with smart flash, when this happend to me and my sim card its not recognized,. so please explain better with video or pictures steb by step how to apear the sim card, thankyou
interr said:
please,please can u explain better, my imei and baseband is not showing in setings in my phone., i wanted to downgrade into gingerbread stock rom with smart flash, when this happend to me and my sim card its not recognized,. so please explain better with video or pictures steb by step how to apear the sim card, thankyou
Click to expand...
Click to collapse
Your imei should not show in settings, it should show in the back of your battery and when you dial : *#06# into the phone (where you dial numbers for calls).
Cant help you with baseband.
OP here, I am trying to unroot my phone and put stock firmware to get warranty to fix the simcard reader ( i believe it is a hardware issue ).
If I use nvflash and flash any stock firmware I can find on the internet, will that be OK? I have a feeling each region of optimus 2x has slight differences in firmware, eg swedish stock roms and australian stock roms may differ in the default applications etc.
Will it be ok to just install any kind of stock rom for my warranty? Help would be appreciated my warranty is running out in less than a month now.
I also tried to flash stock firmware with CMW, it didnt work. I am about to try NVflash, so I went into greater detail in page 1 but no one replied yet. If you guys know please help. I am more familiar with CMW than NVflash. I have not used NVflash yet.
hahah after 2 sleeples nights i menage to restore my sim to be recognize ,whit this metod,.. NFlash rulles ))
http://www.ibtimes.co.uk/articles/408044/20121124/unbrick-tool-lg-optimus-p990.htm
http://androidadvices.com/unbrick-lg-optimus-2x-p990-android-phone-tutorial/
http://progmaq.es/cm10/progmaq-default-cm-10-20121105.7z
http://progmaq.es/cm10/progmaq-default-cm-10-20121105.7z
this is also the best metod for unbricking your phone, .
INSTALLATION:
ATTENTION
The flasher with NVFlash clears all memory, including the Internal SD., so make a backup if u can..
Download this file: http://bayfiles.com/file/yKZL/eGZ31A/driver.rar The pack includes the APX driver (folder driver)
http://www.putlocker.com/file/4CEDEB7E0893B6F1
1.- Remove the battery to the phone.
2.- Press and hold Vol- and Vol+ and without releasing the 2 keys connect the USB cable to the PC
3.- Go to the progmaq-default-cm-10-20121105 folder and run flash icon... folow instruction., wait wait wait Enjoy!
Custom40 said:
1) Connect your phone by USB.
2) Enter 1809#*990# in dialer.
3) Select Port Setting -> Select CP USB
Click to expand...
Click to collapse
I managed to get an old CM7 install back on the p990,but the above is still not working for me :/
After I finish typing in 1809#*990# in dialer, nothing happens. If I press the green phone handset icon to dial that number it comes up with an error message of "Mobile network not available".
Any further advice? Thanks.
Okay, I failed at reading comprehension – it has to be an LG Gingerbread ROM for this code to work, NOT a CM-based one!
Trying one from somewhere-I-cannot-link-to-yet
Success! Once I was back on the original stock LG Gingerbread ROM, I could reset the IMEI and make/receive calls again using this method. Thank you very much!
Now all flashed back onto a nice "working" nightly CM10.1 and a very happy little device.
Many thanks all.
Hi,
Anyone have a working link to "progmaq-default-cm-10-20121105 ". My Optimus 2x has been bricked as well, and can't find any other version of this on Google unfortunately
Appreciate all help.
Hi everyone,
I just bought LG Optimus 2x SU660. Currently the phone is on android version 2.2.2 i tried to update it through LGMobile Support Tool but it says there is no update for this phone. i want to update it on gingerbread. i searched for its stock rom of gingerbread but i didn't find it. Another issue is it doesn't recognize my sim, there is a cross mark above the signals sign. I am in Pakistan and we have different carrier i tried them all, one of them worked fine and shows signal properly but i can't make or receive any call. what i think may be the cell is locked on T network and there's another option of 3g and some application just show something in korean with USIM mentioned. can anyone of you please tell me the possible solution for this issue and also where can i have stock rom for gingerbreag plus how can i install it on my phone.
Thanks a lot in advance.
Gud day!
SU660 stuck to cwm rocovery mode
hi all,
i have done something really nasty to my fone.
i asked for the help on above post after that i searched a lot of forums and found this link
http://forum.xda-developers.com/showthread.php?t=1889328
i followed it and update my su660 to ics 4.0.4 but signal problem still exist.
then i thought to install custom rom so i rooted my cell with unlockroot 2.3 and my su660 got rooted.
after that i want to install cwm 5.0.2.7 using rom manager but it says there is no cwm for SU660.
i downloaded cwm 5.0.2.7 from this link
http://optimus-android.blogspot.com/2012/03/how-to-install-ice-cream-sandwich-ics.html
and tried to install but it get error on commandline screen "apx driver error" or something like it.
i searched and install apx drivers but no gain.
then i found this link on xda
http://forum.xda-developers.com/showthread.php?t=2072141
i used nv.rar mentioned on the page and successfully run it. after that my su660 get into recovery mode and i saw recovery menu but i can't do any thing
when i try option "reboot system now" it reboot system but gain start in recovery mode.
when i try to install rom from internal sd it say
E: can't mount /emmc/
when i try to switch it in APX mode screen say "s/w and something in korean language"
when ever i restart by pulling battery out and then in it goes to recovery menu.
in short i am just stuck to the recovery mode.
i dont know what to do know i explored many forums but didn't found any solution.
help from you all is highly appreciated, thanks in advance buddies!
one thing more i am using windows xp.
except then one successful cwm recovery that was done on windows 7 on my office machine.
So it seems that you semi-bricked your phone.
To get it back working you have to flash an Nvflash compatible rom like V10B (if I remember right) and then re-smartflash to the ICS latest V30B.
I don't know why you bought an SU660. That model is made for Asia and I don't think it support the different frequences we are using here. They made it for that purpose. Good Luck!
Stuck at LG logo
SubZero.it said:
So it seems that you semi-bricked your phone.
To get it back working you have to flash an Nvflash compatible rom like V10B (if I remember right) and then re-smartflash to the ICS latest V30B.
I don't know why you bought an SU660. That model is made for Asia and I don't think it support the different frequences we are using here. They made it for that purpose. Good Luck!
Click to expand...
Click to collapse
thanks alot for your kind reply. i actually changed that set that might had some hardware issue. i got another Su660 and worked fine for me, i tried to update it on ics 4 using the following link but unfortunately it shows timeout error after 'partition' command.
http://forum.xda-developers.com/showthread.php?t=1889328
then my SU660 restarted and stuck on lg logo.
i tried to use nvflsh with the help of the following link
http://forum.xda-developers.com/showthread.php?t=1867292
but it throws error "Bootloader failed NvEror 0x0
Command filue: bootloader download failed
press any key to continue...."
(see attached file)
can you please help me to rectify it?? i seached alot but didn't find any solution.
thanks alot in advance.
SubZero.it said:
So it seems that you semi-bricked your phone.
To get it back working you have to flash an Nvflash compatible rom like V10B (if I remember right) and then re-smartflash to the ICS latest V30B.
I don't know why you bought an SU660. That model is made for Asia and I don't think it support the different frequences we are using here. They made it for that purpose. Good Luck!
Click to expand...
Click to collapse
i also tried this
http://forum.xda-developers.com/showthread.php?t=2072141
nv.rar special package for SU660 by "bitdomo"
but again same error i mentioned in previous post
Hali Siddiqui said:
i also tried this
http://forum.xda-developers.com/showthread.php?t=2072141
nv.rar special package for SU660 by "bitdomo"
but again same error i mentioned in previous post
Click to expand...
Click to collapse
hi everyone,
i just installed ICS 4 using following link
http://forum.xda-developers.com/showthread.php?t=1889328
All i did was just change my data cable and it is done
i am mentioning it if any one may visit this, the post can be more usefull for him
and thanks to everyone
Enjoy
Hali Siddiqui said:
Hi everyone,
I just bought LG Optimus 2x SU660. Currently the phone is on android version 2.2.2 i tried to update it through LGMobile Support Tool but it says there is no update for this phone. i want to update it on gingerbread. i searched for its stock rom of gingerbread but i didn't find it. Another issue is it doesn't recognize my sim, there is a cross mark above the signals sign. I am in Pakistan and we have different carrier i tried them all, one of them worked fine and shows signal properly but i can't make or receive any call. what i think may be the cell is locked on T network and there's another option of 3g and some application just show something in korean with USIM mentioned. can anyone of you please tell me the possible solution for this issue and also where can i have stock rom for gingerbreag plus how can i install it on my phone.
Thanks a lot in advance.
Gud day!
Click to expand...
Click to collapse
I bought su660 in november 2012. it was with 2.2.2 too. Few times i have flashed it, but after i flash back 2.2.2. After that with Lg mobile support tool it's updated to 2.3.4 with out problems. And after update it's updated again with LG mobile support tool to 4.0.4 v30C
hello all. my phone shows "reorganizing internal processes" whenever i try to make a call. bcoz of this it is unusable as a phone.
also imei is null, baseband is unknown and cellular is in NO SERVICE.
nothing works: tried reboot,
other roms (cm 11, zaiben, mahdi etc..),GetRIL app...
also i tried to flash latest v20c but it always stuck at 10%..
but i can flash anything from cwm(philz touch)
so can anyone please help me with the so said baseband in cwm flashable format or a cwm backup of latest v20c update?
i'll be grateful to anyone who looks into this issue.
thanks in advance.:good::good:
Hi,
I will have your thread moved to your device section.
Good luck!
You will not find ant flashable format for cwm... I think, did you try to flash v20b? Only way to change you baseband is to flash firmware.
i"ll try upload you stock partitions to flash ***when i find some free time***
Marko055 said:
You will not find ant flashable format for cwm... I think, did you try to flash v20b? Only way to change you baseband is to flash firmware.
Click to expand...
Click to collapse
yes i tried flashing latest v20c and v20b.. but always stuck at 10%.. tried 3 different pcs and cables and latest method of kdz flashing too.. still no luck:crying:
Any updates on this?? anyone?
I just check on lg page, latest firmware for your country is v20A, so try to flash that.
Marko055 said:
I just check on lg page, latest firmware for your country is v20A, so try to flash that.
Click to expand...
Click to collapse
dude, i cant "FLASH". thats the problem
What about LG Mobile support tool? Connect phone via USB and wait for the tool recognizing it. In the menu you can "reset upgrade errors", the tool downloads latest version for your phone automatically and flashes itself.
Yeah, the 4X is nearly unbrickable. Even when nothing works, LG Mobile support tool can get it back with a stock rom.
I am in Portugal and have the same problem. I read in a different thread that the problem of "reorganizing internal processes" is in fact a crash of the phone/radio process, due to hardware bug that stucks when both voice and data communications are requested at the same time in a 3G network. I'm not sure if even V20C can correct the problem. One solution is to switch to 2G in general, (EDGE data speeds... )and you won't have problems, When needing for a particular download, switch temporarly to 3G.
But if anyone have a 3G stable solution, please share as I am also highly interested!
I tried stock JB. In custom CM roms, for instance 4.4.4 (is what I have now), you won't have a "reorganizing..." message, but you will loose completely mobile communications when the problem occurs, and only a phone reboot will recover it
SHA_NDY said:
What about LG Mobile support tool? Connect phone via USB and wait for the tool recognizing it. In the menu you can "reset upgrade errors", the tool downloads latest version for your phone automatically and flashes itself.
Click to expand...
Click to collapse
tried that already. it stops at 10%. says retry. no go.
ismayeel25 said:
tried that already. it stops at 10%. says retry. no go.
Click to expand...
Click to collapse
I did have sam problem wiht 10% thingy but I use the LGFlashtool2014 from the forum:
Code:
http://www.mediafire.com/download/wu50af8uh99air7/P880-Flashtools.rar
(credit to proper uploader, I dont remember where did I get it, sorry)
The problem causes by LG update software when you kdz from 20A to B or C.
about the IMEI the V20C not really solve my problem but it' sustainable.
Bests of luck.
Thanks. i'll try it.
any chance
Hi
I have gone through the forums and can't seem to find solution for my problem with my Optimus L90 phone.
I have recently flashed the CM13 on my phone without any errors but below are the issues that I am facing
1. No cellular network signal after inserting SIM card.
2. I read in a different forum that this could happen due to using a wrong version of TWRP, so installed a newer version 2.8.7.0 but things worse.
3. Now I am not able to boot into recovery mode and phone just stays idle with the LG logo screen and few commands appearing like fastboot_iniy() and udc_start().
4. I have tried hard reset and soft reset and both are not successful.
5. I cannot root my phone either. Tried all ways like towelroot, purpledrake, lg root by avicoh etc but in vain
Now my phone, even though has a latest CM version I cannot use it for anything else.
Any help is greatly appreciated.
No SIM is hardly related to TWRP, probably you needed a different bootstack (there is a thread about it).
On CM you don't need anything to root, it's already rooted just not visible to common users, you need to activate Developer Options (it's also explained elsewhere)
Finally, if you cannot reach recovery but still can boot CM13 simply use adb, Flashfy or Hashr to flash another version or TWRP. 2.8.7 is kinda old and not recommended for Marshmallow, you can try 3.0.2 by SlimShady or DarkBlue version from shoxxy's thread.
Thanks for the reply, let me try options you have specified and get back if I am still facing issues
hvramanan said:
Thanks for the reply, let me try options you have specified and get back if I am still facing issues
Click to expand...
Click to collapse
I was able to unblock my phone finally and loaded the stock ROM but the phone is still isn't recognizing cellular network . I am on T-MOBILE. I have tried to insert different SIM, turned off wifi calling but still the phone is not catching any cellular network.
[lfom]: you indicated earlier that a different bootstack might be needed. I am not that knowledgeable about bootstack so can you help me through this or point me to different thread where users might have a similar issue.
Sorry, I meant to say unbrick above
Everything one needs or wants to know about bootstack is here:
http://forum.xda-developers.com/lg-l90/development/bootstack-kk-l-l90-t3118632
lfom said:
Everything one needs or wants to know about bootstack is here:
http://forum.xda-developers.com/lg-l90/development/bootstack-kk-l-l90-t3118632
Click to expand...
Click to collapse
Hi,
I followed the steps mention in the above thread to change the bootstack and was able to complete it without any issues, however the problem still persists and my phone is not recognizing the SIM and does not catch the cellular network.
Previously I used to use this phone with my t-mobile number and after I took a new phone haven't been using it for sometime. I want to sell this phone and was trying to ensure that it works fine and thats when I saw that the phone is not catching any cellular networks.
Please help. Let me know if you need any other details to better diagonize the problem.
hvramanan said:
Hi,
I followed the steps mention in the above thread to change the bootstack and was able to complete it without any issues, however the problem still persists and my phone is not recognizing the SIM and does not catch the cellular network.
Previously I used to use this phone with my t-mobile number and after I took a new phone haven't been using it for sometime. I want to sell this phone and was trying to ensure that it works fine and thats when I saw that the phone is not catching any cellular networks.
Please help. Let me know if you need any other details to better diagonize the problem.
Click to expand...
Click to collapse
You didn't say what model you have, maybe you flashed the wrong bootstack for your model (hardware version)? Be very careful, you can hart brick your device, and if it's a D415 it's very hard to unbrick. I'd suggest that first you make sure what model you have by removing the battery and looking in the label below, it says what model you have. Then, use LG Flash Tool to flash stock ROM (KDZ) to latest KitKat, then flash Lollipop or use OTA to update to latest version. The only requirements are that you make sure what model you have and flash the corresponding version, and the phone is still able to enter download mode.
lfom said:
You didn't say what model you have, maybe you flashed the wrong bootstack for your model (hardware version)? Be very careful, you can hart brick your device, and if it's a D415 it's very hard to unbrick. I'd suggest that first you make sure what model you have by removing the battery and looking in the label below, it says what model you have. Then, use LG Flash Tool to flash stock ROM (KDZ) to latest KitKat, then flash Lollipop or use OTA to update to latest version. The only requirements are that you make sure what model you have and flash the corresponding version, and the phone is still able to enter download mode.
Click to expand...
Click to collapse
[lfom]: thank you for responding. My phone model is LG-D415 . Actually my phone was bricked but I was able to get into download mode and then I used the L90 Hardbrick tool to flash stock ROM (KDZ) to latest kitkat like you have specified above. Then with the OTA update I was able update it to latest lollipop. Then I followed this forum below to to change the bootstack to KK 10C version as the issue specified in the below thread was similar to mine.
http://forum.xda-developers.com/lg-l90/development/rom-cyanogenmod-12-lg-l90-t3049512/page235
Image of the label inside my phone attached.
Do you think I should have used the LG flash tool to flash stock ROM. Should I repeat the steps with the LG flash tool ?
Thank you again for helping me on this.
Do you see your IMEI in the about phone page? Does it match the one in the label? Maybe when you bricked you've lost the phone's IMEI, and you can't get it back just flashing ROM...
lfom said:
Do you see your IMEI in the about phone page? Does it match the one in the label? Maybe when you bricked you've lost the phone's IMEI, and you can't get it back just flashing ROM...
Click to expand...
Click to collapse
Yes I checked and it matches. There two fields IMEI which has the number and then there is another field which says IMEI SV and it has a value of 02 in it.