Database Develop

CM C&D for What Version?

Hi...I've been reading through everything regarding Google vs. Cyanogen dispute. IMHO I feel very sad about it but....what can we do?? I like CM ROMS they are probably the best (I'm not saying JF, HAYKURO, etc, are bad, just that I prefer CM) but since all the C&D issue Gmail, Gtalk, Market, don't work..Well
Well the thing is, I've read some comments that on CM Versions up to 4.0.4 everything still works fine...it just gets messy from 4.1.x and up, is this true??
cause I still have 4.0.4 in my computer and I really want to flash it to this version...so please let me know..
Thanks!

We are all done talking about the C&D. There are plenty of threads about it. Download CyanogenMod Petition off the market to show support.
As for his ROMs 4.04 is stable. Nice ROM with lots of themes for it. 4.1.11.1 was days away from being stable. It is pretty stable. The only problems I have noted is some apps arnt supported with 1.6 firmware base. And sometimes my icons just disapear from my home screen but, after reboot its fine for another 24 hrs.

2 things really
1. you have a valuable pm
2. ummm 4.1.11.1 hasn't given me any problems except once out of a week or so i have been using it, i got the coma issue and had to reboot. also anything you have on your computer is well.... on your computer, is google going to stop every one they see with a g1 and go to settings- about phone and see if there a cyanogen mod version number there.

I think I didn't make my self very clear, when I ask if it is giving any problems I refer to the Market, Gmail, Gtalk still workin with CM version 4.0.4...that is the real question

i use gtalk all the time in 4.1.11.1. the market works just fine for me. gmail registers my emails on my phone faster then it does on my computer. i don't use maps to often (unless i go out of state, i know where i am going), so i haven't had a need to use it in 4.1.11.1, but it still should work.
I literally mean the only i have had with 4.1.11.1 is that one instance of the coma occurring. i have had no problems with anything else that is rom specifically related, the only thing that isn't the roms fault is that some of the apps are not 1.6 compatible, but again, not the fault of the rom.

I Understand
I get what you are saying. Google has no way of detecting that you are using an "unauthorized" ROM. Flash away. Except for the "coma" issue (was wondering what that was called), 4.1.11.1 is pretty nice. I prefer 4.0.2 over 4.0.4 for the stable but that's just me. Anyway, why not wait. Cyan has a surprise for everyone this weekend.

What is the CM9 issues and how do you guys survive with it ?

Hi , anyone can tell me the exact CM9 issues and why it's cannot be fixed yet ?
So how you guys survive with that ROM ?
Please share me some TIPS .
Currently i'm using Stock Gingerbread since I bought it last year December and now I would like to use CM9 custom rom (PARANOIDANDROID) yayyy
Thanks .

reyyy96 said:
Hi , anyone can tell me the exact CM9 issues and why it's cannot be fixed yet ?
So how you guys survive with that ROM ?
Please share me some TIPS .
Currently i'm using Stock Gingerbread since I bought it last year December and now I would like to use CM9 custom rom (PARANOIDANDROID) yayyy
Thanks .
Click to expand...
Click to collapse
I guess the idea is to test your own skills in modding your phone and see, what the different developers would like us to have. After a few installs, you are hooked at getting your daily fix of new ROM and will suffer withdrawal symptoms, if no new ROM are a available for even a short period!!
Even if all the latest ROMs are not fully functional, they still add many new features to our phone.
I have become very enthusiastic about my phone again and I have had it for almost two years now. The longest time I have ever had a mobile phone.
What also is interesting is that you are able to try so many new apps, that only works if your phone is rooted.
So the benefits are many and if you are not satisfied, there are very good guides on how to go back to stock.
Good luck

reyyy96 said:
Hi , anyone can tell me the exact CM9 issues and why it's cannot be fixed yet ?
So how you guys survive with that ROM ?
Please share me some TIPS .
Currently i'm using Stock Gingerbread since I bought it last year December and now I would like to use CM9 custom rom (PARANOIDANDROID) yayyy
Thanks .
Click to expand...
Click to collapse
CM 9 don't support Hardware acceleration. Thats the major problem that i know

reyyy96 said:
Hi , anyone can tell me the exact CM9 issues and why it's cannot be fixed yet ?
So how you guys survive with that ROM ?
Please share me some TIPS .
Currently i'm using Stock Gingerbread since I bought it last year December and now I would like to use CM9 custom rom (PARANOIDANDROID) yayyy
Thanks .
Click to expand...
Click to collapse
Hardware Acceleration in CM9 for LG O2X is not working as of now (Needs LG to release an ICS based kernel).
Due to which:
- Video Recording doesn't work.
- Will not be able to play HD videos.
- Some of the system apps will start to lag after some usage (Phone & Contacts).

thank you . i hope the promised official ICS update will reach soon .

reyyy96 said:
Hi , anyone can tell me the exact CM9 issues and why it's cannot be fixed yet ?
So how you guys survive with that ROM ?
Please share me some TIPS .
Currently i'm using Stock Gingerbread since I bought it last year December and now I would like to use CM9 custom rom (PARANOIDANDROID) yayyy
Thanks .
Click to expand...
Click to collapse
Ok, so CM 9 and CM 10 has the following problems:
1) No Hardware acceleration which means:
a) You CAN'T use your video camera at all. Now, I know that some says that you can use Videocam illusion, but that app can record only very low quality videos, which I found to be pretty useless (a lot of CPU use for that low quality).
b) Google Chrome is not supported due to it's need to access the GPU, but this is not so important due to other very good browsers
c) You will experience scrolling jittering. That being said when you will try to change between photos in the gallery (usually there is the bigest problem), or between songs in some media players by swaping on the screen, you will see something like the photo or album art is going back from where it came, but the result is good: changing the photo / song. The only problem is the visual one.
d) Gameloft games, and especially those with a little video at the begining will not work until you delete those clips from the instalation folder.
2) No radio application => no more FM radio for you. Wi-Fi (or a really well data plan) resolves this thing by using it for Tune-in Radio, a very good application for radio. I prefer to use it even on GB roms, because of the very good sound quality regardless the standard radio that sometimes loses the signal.
3) On CM 10 there are a few more bugs like no automatic brightness, or battery drain due to Wi-fi. Regardless all theese bugs, I found CM 10 from ParanoidAndroid to be a way much better rom than any other around here. Keeping the Wi-Fi off I don't experience any battery drain (more than that my battery last longer than anytime) and my favorite no data connection lost (I don't know if this was a carrier problem or not, but before switching to CM 10 i had a lot of data connection problems).
4) Not to be forgotten the lag on installing applications from Google Play Store. I found this problem on almost every single rom I've tried, and I tried almost all of them. I think I found only one or two roms w/o this problem, but being a maniac for the latest updates I've chosen the ICS and JB roms instead of a very stable one
5) No GPS working on CM 10
Now it's your decision. If you can live w/o video camera and gps and try to not get angry at every scroll bug you should really try the new CM 9 and 10 roms

al3x1393 said:
5) No GPS working on CM 10
Click to expand...
Click to collapse
GPS is working fine for me on CM10 (KashaMalaga's build)
reyyy96 said:
So how you guys survive with that ROM ?
Click to expand...
Click to collapse
I know this may sound weird to you, but: I can survive without any ROM.
It's not that your life depends on your smartphone, does it?
Just be happy with what you got.

[Q] kabaldans CM10 nightly - some issues

hey folks,
I have been following all the Milestone development threads since the very beginning, and have gone through each inkarnation of kabaldans incredible work since CM6. Recently, I updated to CM10 (first without, now with 2nd boot) and am absolutely amazed by how far our good old milestone has come. While playing around with it quite a bit, I have come across some problems (I would love to report them in the appropriate development thread, but the 10-post-count won't let me unfortunately.)
First, I really loved the keyboard multipress-system since I live in Germany and have to enter Umlauts very frequently (ä, ö, ü, etc.). The multipress-system sped that up greatly. Now, although the corresponding settings are there in the Milestone-specific part of the Settings-app, multipressing actually doesn't work for me in CM10. Is that problem specific to me, or is multipress not yet fully integrated in CM10?
The second thing I noticed (probably since 2nd boot, but I am not entirely sure) is, that in the Settings under About Phone > Status neither IME nor Serial number are displayed (instead, it says "unknown"). This also prevents me from launching Whats App - it quits saying "Your phone could not be identified ....".
Does anyone else experience those issues - and/or could perhaps somebody please post this into the CM10 development thread, so kabaldan notices?
thanks, mvol

mvol said:
hey folks,
I have been following all the Milestone development threads since the very beginning, and have gone through each inkarnation of kabaldans incredible work since CM6. Recently, I updated to CM10 (first without, now with 2nd boot) and am absolutely amazed by how far our good old milestone has come. While playing around with it quite a bit, I have come across some problems (I would love to report them in the appropriate development thread, but the 10-post-count won't let me unfortunately.)
First, I really loved the keyboard multipress-system since I live in Germany and have to enter Umlauts very frequently (ä, ö, ü, etc.). The multipress-system sped that up greatly. Now, although the corresponding settings are there in the Milestone-specific part of the Settings-app, multipressing actually doesn't work for me in CM10. Is that problem specific to me, or is multipress not yet fully integrated in CM10?
The second thing I noticed (probably since 2nd boot, but I am not entirely sure) is, that in the Settings under About Phone > Status neither IME nor Serial number are displayed (instead, it says "unknown"). This also prevents me from launching Whats App - it quits saying "Your phone could not be identified ....".
Does anyone else experience those issues - and/or could perhaps somebody please post this into the CM10 development thread, so kabaldan notices?
thanks, mvol
Click to expand...
Click to collapse
I have issue like this, and I can see IMEI and IMEI SV, but the Serial Number is "unknown".

after doing a full wipe, IMEI now shows up for me as well, but unknown serial and multipress problems remain.

mvol said:
hey folks,
(I would love to report them in the appropriate development thread, but the 10-post-count won't let me unfortunately.)
Click to expand...
Click to collapse
You are almost at the 10th post.
Maybe wiping everything is a solution for that?

mvol said:
hey folks,
I have been following all the Milestone development threads since the very beginning, and have gone through each inkarnation of kabaldans incredible work since CM6. Recently, I updated to CM10 (first without, now with 2nd boot) and am absolutely amazed by how far our good old milestone has come. While playing around with it quite a bit, I have come across some problems (I would love to report them in the appropriate development thread, but the 10-post-count won't let me unfortunately.)
First, I really loved the keyboard multipress-system since I live in Germany and have to enter Umlauts very frequently (ä, ö, ü, etc.). The multipress-system sped that up greatly. Now, although the corresponding settings are there in the Milestone-specific part of the Settings-app, multipressing actually doesn't work for me in CM10. Is that problem specific to me, or is multipress not yet fully integrated in CM10?
The second thing I noticed (probably since 2nd boot, but I am not entirely sure) is, that in the Settings under About Phone > Status neither IME nor Serial number are displayed (instead, it says "unknown"). This also prevents me from launching Whats App - it quits saying "Your phone could not be identified ....".
Does anyone else experience those issues - and/or could perhaps somebody please post this into the CM10 development thread, so kabaldan notices?
thanks, mvol
Click to expand...
Click to collapse
Hi mvol,
I am running the new CN10 10/24, the seril reports also Unkown but it doesnt stop me from running and using WhatsApp app.
regards
EP

WhatsApp now works - it looks like the full wipe which solved the unknown IMEI problem also fixed WhatsApp.

mvol said:
WhatsApp now works - it looks like the full wipe which solved the unknown IMEI problem also fixed WhatsApp.
Click to expand...
Click to collapse
Realy ? I will have a try !

I also went through this and really soh after giving a factory reset was decided that in fact

have you guys tried multipress using the hardware keyboard? Does it work for you?

mvol said:
have you guys tried multipress using the hardware keyboard? Does it work for you?
Click to expand...
Click to collapse
here using the shift and alt is working normally above 2 keys simultaneous ... not tested on that specifically, you will use more than 2 simultaneous keys?

with "multipress" I mean the feature invented by nadlabak/kabaldan that allows one to press the same key multiple times very quickly to enter special characters (like pressing "a" two times very fast producing "ä", for example.) It worked perfectly for me in CM7, but it doesn't anymore in CM10...

anyone, please?

It works fine for me. I use it frequently.

mvol: I still haven't found the time to implement the multipress feature completely in CM10. Only a few of the final bits is missing. Please be patient.

thanks for your answer - in that case, I'll wait patiently

Link not working for me
Hi All,
Im unable to access the latest builds for milestone CM10 by kabaldan. Please can anybody provide alternate link?
Thanks

Hello people!
I'm a long time CM ( 6 and 7 ) user on my Milestone.
After updating it to CM10 ( full wipe, ext3 partition formatted ), adb does not find my device anymore.
I have changed the USB settings and enabled the debugger in development, but nothing changes. Even after a restart.
Running on Ubuntu 12.10.
Any ideas?
Thanks!

The issue I have is quite annoying, if I can use such a word in a development stage . After each restart, the network is being forgotten, so I have to switch to the airplane mod off and on.

@pt0: This is a known issue, if I can say that. I experience this too, though not after every restart. I think it's a problem we can live with.

Jellybean ROM issue/question

I am currently running Altonus2 V1.2 with Kernel Version 2.6.32.9-kfazz-g21797a7-dirty and first off I must tip my hat to the developers, it's mind blowing that they were able to make this work on the OG Droid.
My issues are: GPS doesn't\ work (no navigation, just "searching for satellites") and the internet crashes shortly after the browser opens. The phone runs slow but I imagine that is just a side effect from running JB on an older phone. Is there a way to get GPS and the internet working? I'm not new to flashing roms and the like but compared to the experience here I'm all but a noob to any help is appreciated. Thanks.

sbcadillac said:
I am currently running Altonus2 V1.2 with Kernel Version 2.6.32.9-kfazz-g21797a7-dirty and first off I must tip my hat to the developers, it's mind blowing that they were able to make this work on the OG Droid.
My issues are: GPS doesn't\ work (no navigation, just "searching for satellites") and the internet crashes shortly after the browser opens. The phone runs slow but I imagine that is just a side effect from running JB on an older phone. Is there a way to get GPS and the internet working? I'm not new to flashing roms and the like but compared to the experience here I'm all but a noob to any help is appreciated. Thanks.
Click to expand...
Click to collapse
I believe GPS doesn't work because kfazz had to remove /system/lib/hw/gps.sholes.so because it was causing a bootloop for some people, in regard to Wifi several people have reported problems with it and getting it to connect at all or maintain a consistent connection has been very hit and miss. Keep in mind kfrazz himself said while a lot of progress has been made on the Jelly Bean ROM there are still many thing that don't work and will take a long to fix.

shimp208 said:
I believe GPS doesn't work because kfazz had to remove /system/lib/hw/gps.sholes.so because it was causing a bootloop for some people, in regard to Wifi several people have reported problems with it and getting it to connect at all or maintain a consistent connection has been very hit and miss. Keep in mind kfrazz himself said while a lot of progress has been made on the Jelly Bean ROM there are still many thing that don't work and will take a long to fix.
Click to expand...
Click to collapse
Thanks for the reply. I will keep watching his his progress then. Great work so far!

[Q] No 3g with CM 10.1 plus some other less severe issues

Greetings,
Just a few days ago I installed the most recent CM 10.1 nightly, first 20130319 and now updated to 20130323. For the most part, my phone is working well, but I do not have any 3g data service nor have I had it since installing CM 10.1.
I have a Droid 3 XT862 being used in the US on Verizon's CDMA network and placing and receiving calls works. I *can* send and receive SMS as well, although in a test I did toay I sent very short 25 character text from my Droid 3 on the Verizon network to another Android device on the Sprint network and it arrived a mere 2h15m later.
I have read many messages on this forum and others, but either the problem addressed is too far removed or the ideas/changes suggested are offered with little explantion as to why, so I am unsure if making any of these changes would be a good idea. I did read through the build.prop on my device and it certainly appears that it is more or less configured and ready for CDMA usage. I have performed a *228 PRL update, but it did not appear to help. CM 10.1 makes available, unlike the stock ROM, a menu/page full of mobile network settings. I have tried to work with some of these settings, toggles, preferred network types, and so on, but again none of these changes seems to have had an effect on my 3g data connection.
Am I doing something wrong? Does anybody know how to fix this? Or perhaps it is a new/temporary bug in CM 10.1?
As for the operation of everything else under CM 10.1, I like it very much. It is a very big step up from before, when I was first using stock Android 2.3.4 followed by the Maverick ROM, which, while better, sure liked to crash/reboot when under memory pressure. I do have a few issues that I hope others might be able to help with:
* The hardware keyboard's ALT key does not appear to work anymore which rules out half the symbols on the keyboard, making it far less useful. I also cannot use it any longer with VX ConnectBot as some of the mappings do not seem to work. For example, the "OK" key used to work as a CTRL key. Maybe these are related? Any idea how to fix this?
* The backlight on the hard buttons and on the keyboard was, previously, triggered by a light sensor (I think). Now the backlight comes on when there is any tapping, swiping, or button/key activity. That's fine, except that the timeout for the light is extremely short, on the order of about two seconds. In a dark environment, this can be annoying.
* It's slow... my god is it slow! I think this is due almost entirely to a severe lack of free RAM on the device, but I don't know what to do about it. Some programs, like GMail, take forever to start, while many others are just very slow to use/respond. I see the "Not Responding" popup appear *much* more than ever before, but, as I know these apps are just slow and not dead, I always just tap on "wait" and go on with what I was doing.
I really don't think I have that much running in the background or foreground to use all of this RAM. I have replaced Trebuchet with NemusLauncher in hopes of freeing some memory. I have three widgets only: a clock/weather widget, the standard calendar widget, and the Google Voice inbox widget. In the background, besides whatever Android and CM run, I have Google Voice and imo (the instant messanger) running. I believe that is it. Is there *anything* I can do to improve the speed issue? I understand how Android handles memory, so it is clearly not about just increasing the "free RAM" value. That said, however, it seems that if there were fewer apps trying to use the limited memory then this would naturally be higher to begin with.
I have a decent collection of apps, but the number is much smaller than in the past and most all of them should remain dormant unless I actually run them... or so I believe.
Okay, so those are the issues. I could add battery life and the camera to that list, but I have read on the forum that, no thanks to Motorola, the camera is unlikely to be available anytime soon, and I have also read that the battery issues should be resolved soon.
So, um... please help! And great many thanks to all of the hard working devs who bring us better software and especially to those who help those of us with devices that are practically *new* and yet abandoned by the carriers. Extra kudos to those finding ways to work around locked bootloaders and proprietary binary blobs.
--John Gruenenfelder

Can you force it to EVDO only? And what happens in a stock ROM?

In the mobile network settings page, as mentioned above, I can, and have, tried many of the options. Among them is the preferred network type.
It defaults to 'global' which actually sets it to LTE/CDMA, though this is not an LTE device. I have tried all of the options that make sense (i.e. nothing GSM related). I have tried Evdo-only and currently have it set to 'CDMA/Evdo auto'.
None of these settings has changed anything. To test, I disable WiFi and see if I have a Net connection.
With the stock ROM, as well as the Maverick ROM, when I have 3g, the letters '3g' appear in the status bar next to the mobile signal strength icon and there are two small arrows to indicate I/O. This is what I expected to happen with CM.
-Sent from my XT862 using xda app-developers app

I have a 3g update, but no solution yet.
In the mobile net settings page I have the network set to 'CDMA/EvDo auto'. Then I turn on airplane mode to force the radio off, then turn airplane mode back off.
The radio comes back and as it does I can see the network strength icon briefly add an R, presumably meaning reconnecting, followed by a 1x, and finally by a 3g. Then the 3g disappears. This entire sequence takes only about 3 to 5 seconds. If I do this while viewing Settings->About->Phone, I can see the current radio/network states change. Of course, I do all of this with my local wifi connection off.
Also, I did try a network type of 'EvDo only' and the above sequence still occurred but without the 1x step. However, this sequence didn't seem to occur as reliably as when the network is set to 'CDMA/EvDo auto'. For reference, the phone info page under settings indicates that this phone or network is 'CDMA - EvDo rev. A:6'.
So, it would seem 3g is at least possible, if fleeting. What should I do now? I really don't want to stop using CM 10.1.
--John Gruenenfelder

Same issue here. No 3g. In the system status, it will briefly show the mobile network status as "connecting" then drop back to disconnected.

If you reboot into stock it works right?

MrObvious said:
If you reboot into stock it works right?
Click to expand...
Click to collapse
Me or rocksolid99?
In my case, I, well, did not follow the correct Safestrap update procedure when I went from 1.x to 3.05. As such, I *think* my stock ROM may be slightly hosed. I *do* have a complete backup of the original stock that I created with Safestrap 1.x, but 3.05 does not "see" it when I tap on the "Restore" button in recovery. So, I have it, I'm just not sure what I should do if I really need to restore that backup.
However, I have installed the Minimoto 1.7 ROM into slot 2 in Safestrap 3.05 and if I use that ROM (which is a super stripped down Droid 3 stock) then 3g works just fine. I did not have any network/connection issues and did not need to take any extra steps to get 3g to work.
--John Gruenenfelder

I'm pretty sure data has not worked in cm10.1 since 3/11 build.
Sent from my XT860 using xda premium

Endoroid said:
I'm pretty sure data has not worked in cm10.1 since 3/11 build.
Click to expand...
Click to collapse
Really? Good to know. Thanks for the info.
If I might reiterate on my other CM 10.1 problem, they keyboard? Right now, the ALT key does not work which means that I cannot access most of the punctuation keys. Strangely, in many apps when I press ALT I will see the cursor change with the upside down triangle at the top of the cursor bar indicating that ALT has been pressed. Good, but if I press any other key it is not recognized. It is as though I had not pressed anything. The ALT indicator doesn't even change or go away. The only thing I can do is continue to press the ALT key to cycle through its states (off, one-key, locked). Could this also be a bug in CM 10.1?
Is there a better or more correct location to submit these issues? Since these issues are/may be bugs in CM 10.1, should I not submit a bug report directly?
Beyond the 3g/data and keyboard issue is the RAM usage. It uses a *lot* of RAM. Is this just the way it is? The Droid 3 lacks enough RAM to really make a serious go at Android 4.2?
Thanks again!
--John Gruenenfelder

JetpackJohn said:
Is there a better or more correct location to submit these issues? Since these issues are/may be bugs in CM 10.1, should I not submit a bug report directly?
Click to expand...
Click to collapse
As a matter of fact, there is: http://androidhosting.org:8050/projects/device-motorola-droid-3-xt862
Hashcode tweeted that last night...
Beyond the 3g/data and keyboard issue is the RAM usage. It uses a *lot* of RAM. Is this just the way it is? The Droid 3 lacks enough RAM to really make a serious go at Android 4.2?
Click to expand...
Click to collapse
When Motorola hinted that this was the reason why the D3 and X2 would not get ICS, nobody believed them.
I think it's pretty clear that CM on the Droid 3 at the moment is alpha/beta status. If you want stability and full features, you need a Gingerbread ROM. Minimoto is best for me.

doogald said:
As a matter of fact, there is: http://androidhosting.org:8050/projects/device-motorola-droid-3-xt862
Hashcode tweeted that last night...
When Motorola hinted that this was the reason why the D3 and X2 would not get ICS, nobody believed them.
I think it's pretty clear that CM on the Droid 3 at the moment is alpha/beta status. If you want stability and full features, you need a Gingerbread ROM. Minimoto is best for me.
Click to expand...
Click to collapse
+1 anything above gingerbread is not stable. Some people manage to use them for daily drivers but they have to deal with the bugs. Myself, I need a camera and I need my phone to work all day, I use it for my job. As such, I run minimoto, as it is quite stable, and any bugs that do arise can be dealt with as it's based on gingerbread, which is stable on our devices. Liberty is also a good rom to use, it's based on an older system version but it's quite stable and has lots of features, as opposed to Minimotos minimalist goal.
Sent from my XT860 using xda premium

has anyone tried making a swap partition for cm10.1 ?
I made it and it seems to be much much faster or the latest nightly (04/07/2013) is quicker.
anyhow I have it up only for about an hour it remains to be seen during the day how it's reacting
regards

Endoroid said:
I'm pretty sure data has not worked in cm10.1 since 3/11 build.
Sent from my XT860 using xda premium
Click to expand...
Click to collapse
Have you (or has anyone) successfully booted CM10.1 on the XT860? I just get bootloops after install. MiniMoto has been working great for me though.