Jellybean ROM issue/question - Motorola Droid and Milestone Q&A, Help & Troublesh

I am currently running Altonus2 V1.2 with Kernel Version 2.6.32.9-kfazz-g21797a7-dirty and first off I must tip my hat to the developers, it's mind blowing that they were able to make this work on the OG Droid.
My issues are: GPS doesn't\ work (no navigation, just "searching for satellites") and the internet crashes shortly after the browser opens. The phone runs slow but I imagine that is just a side effect from running JB on an older phone. Is there a way to get GPS and the internet working? I'm not new to flashing roms and the like but compared to the experience here I'm all but a noob to any help is appreciated. Thanks.

sbcadillac said:
I am currently running Altonus2 V1.2 with Kernel Version 2.6.32.9-kfazz-g21797a7-dirty and first off I must tip my hat to the developers, it's mind blowing that they were able to make this work on the OG Droid.
My issues are: GPS doesn't\ work (no navigation, just "searching for satellites") and the internet crashes shortly after the browser opens. The phone runs slow but I imagine that is just a side effect from running JB on an older phone. Is there a way to get GPS and the internet working? I'm not new to flashing roms and the like but compared to the experience here I'm all but a noob to any help is appreciated. Thanks.
Click to expand...
Click to collapse
I believe GPS doesn't work because kfazz had to remove /system/lib/hw/gps.sholes.so because it was causing a bootloop for some people, in regard to Wifi several people have reported problems with it and getting it to connect at all or maintain a consistent connection has been very hit and miss. Keep in mind kfrazz himself said while a lot of progress has been made on the Jelly Bean ROM there are still many thing that don't work and will take a long to fix.

shimp208 said:
I believe GPS doesn't work because kfazz had to remove /system/lib/hw/gps.sholes.so because it was causing a bootloop for some people, in regard to Wifi several people have reported problems with it and getting it to connect at all or maintain a consistent connection has been very hit and miss. Keep in mind kfrazz himself said while a lot of progress has been made on the Jelly Bean ROM there are still many thing that don't work and will take a long to fix.
Click to expand...
Click to collapse
Thanks for the reply. I will keep watching his his progress then. Great work so far!

Related

Anything not work in the new leak?

Since upgrading will take you off the upgrade path, I was just wondering if there is something on the new build that isn't working.
Like camera, video, data etc.
Honestly, I wouldn't jump on it unless you really need it (I've heard it makes GSM work a lot better). AFAIK, it hasn't even been rooted yet, which means you are giving up a LOT just to get ICS, which you can do from the stock rom and safestrap.
If you root just before flashing and use voodoo rootkeeper you can keep root. I unfortunately forgot to re-root after I needed to flash SBF (wouldn't update). So far everything works for me. Well except root that is. But to tell you the truth. I only used root to change the build.prop and have write access to system (notifications etc). Owh and freeze apps. But thats it.
So far so good! The battery won't last as long as on 219. But by how much I'll have to test. On 219 I ran in 2G mode all the time. So it isn't a real fair comparison. Yesterday I turned off all sync and push and disabled some applications. So we'll see how long it will last today.. I took it off the charger around 07:50 AM. So don't expect an update 'till tomorrow. It's only 08:50 AM where I live .
For the gsm users i recommend this update if you can go with no root
The rom is actually more responsive and most importantly, it dun drop the line that often
And ics with WORKING camera & video, not much is missing actually
According to this, you can keep root if you install OTA Rootkeeper, back up root, temp unroot, restore root, and THEN apply the update.
I updated and kept root and am very impressed with every aspect of performance on this build.
Battery life the first day was excellent, above average considering I was playing with the phone a lot.
Radio performance on VZW's network with this new baseband is exceptional.
Data throughput and transitions from cellular to WiFi and maintaining data connection were all distinctly improved. I am in a marginal 3g only area where I live and work 90% of the time, but I can go a few miles away to get LTE coverage.
While I cannot openly recommend flashing non revertable leaks to anyone, I cannot say enough about how much I am enjoying this build right now. I have yet to find any downside beyond the fact that we have no full firmware files for this build yet.
This is a superlative build and anyone willing to accept the risk should not be disappointed.
25 hours later there's 30% battery remaining. Made 5 1-minute phone calls. Played about 20 minutes of 3D games. Used internet a couple of times (checked email, whatsapp, some internet apps) and I would say at 90% 3G connection. So that's not so bad I would say.
Stuff not Working
For me, my Facebook app (built-in) is not working, and constantly crashes. I finally disabled the app completely to stop getting the crash pop-ups.
Also, built-in MotoCast disappeared, and it does not show up for me in the Play Store (probably because they have not released an ICS version of the app for non-tablets yet in the Store).
Other than those 2 so far, everything I have tested and checked works like a dream come true.
Everything is working great for me. The ota rootkeeper worked as well. Im running the leak with root.. the facebook app that came on the leak needs update. Its an older version. May be the reason
Sent from my DROID4 using xda premium
Anyone else have problems with the headphone jack not working?
Everything seems to work fine for me so far.
Motocast is built in to "My Files", "My Gallery", and "My Music" now. I just installed it and seems to work fine.
Negative. Just drove 20 hours with headphones on.
Sent from my DROID4 using xda premium
What's the battery like for GSM users on 3G with the new leak?
Sent from my XT860 running ICS
I also am having problems with the headphone jack. Is there a fix for this?
mcochon said:
I also am having problems with the headphone jack. Is there a fix for this?
Click to expand...
Click to collapse
Please be more specific about the headphones.
I haven't had any issues with Klipsch X10 headphones at all, but mine is only a 2 prong headset, without microphone or call control features.
I've had some odd headphone issues and I am NOT on the leak.
I'll plug in headphones, but the phone won't switch from the loudspeaker to the headphones. Unplugging and replugging the headphones in usually fixes the issue. Kind of annoying, but I use headphones so infrequently on my phone anyway that I haven't done any hard investigating on whether it is a software or hardware issue.
I'm leaning towards hardware though, because IIRC it happens on stock and the GB-ICS frankenbuilds.
This may be a stupid question but does anyone know if there is going to be a way to reverse being taken off the upgrade path? Im new to the forums and I just started getting into rooting and flashing roms. Im running a nightly build of the aokp ics with cm9. Im happy with it so far but would love to use my camcorder again lol. Are there any other issues with this version of ics?
I dont know about reversing the upgrade path but i do know that everything works really great on my d4 running the leaked ics.
Sent from my DROID4 using xda premium
anon117 said:
This may be a stupid question but does anyone know if there is going to be a way to reverse being taken off the upgrade path? Im new to the forums and I just started getting into rooting and flashing roms. Im running a nightly build of the aokp ics with cm9. Im happy with it so far but would love to use my camcorder again lol. Are there any other issues with this version of ics?
Click to expand...
Click to collapse
You SHOULD be able to get back on the upgrade path using the same method others have used to go from the .200 ICS leak to the .206 ICS leak. That involves a partial flash of the .219 fastboot file to essentially trick the update into thinking you are still on .219. But there are no guarantees.
I see. Thank you for your input. One more thing does anyone know if the gummy rom has been updated? I was using it for a few days but decided to go to the aokp for better 4g functionality.

Broken Wi-Fi

Hey guys, since yesterday my milestone doesn't find any Wi-Fi network. Any ideas ?
PS: I tried with CM7 and CM9.
tomitzam3 said:
Hey guys, since yesterday my milestone doesn't find any Wi-Fi network. Any ideas ?
PS: I tried with CM7 and CM9.
Click to expand...
Click to collapse
Did you drop it or something?
I've actually had this problem quite frequently with 2.3 based roms, most notably with the SteelDroid rom.
The only way I could ever get wifi re-enabled was to mess around with bringing it up and down. All I can suggest it to keep persisting with turning it off and on and you should get it back sooner or later, at least that's what my endeavors have shown.
I believe it's a wifi driver issue since the problem doesn't exist for me when I fall back to 2.2 based roms. If I run into the issue again, I'll post a logcat of for it and hopefully that will help someone who know's more about this to help you. If you could provide a logcat, that would be even better.
In 2.3-based roms I usually had to switch Wi-Fi several times to make it work, while in some Froyo-based roms I had to reboot (also on few 2.3 roms that use older kernel).

[Q] Latest/best rom with everything working?

Tried 10.1 no external mic/voice deal killer. Cm9 no 3/4g radios deal killer, CM10 no gps deal killer. So There are no updated roms that that keep ALL of what I consider core functionality? So I'm on 3.2 any suggestions on the best 3.2 rom? I've re-flashed at least 5 times looking for the "perfect" rom and I'm really sick of entering all my info/apps only to flash them away....
10.1 was great but losing the mic/voice interface is unacceptable. Also the voice interface on 3.2 seems similar to "google now" but not quite can it be upgraded to full functionality?
I'm currently StreakDroid-HD7R3-4G-105 tried r8 first and it wouldn't boot so any thoughts on r4/7 or is the anther rom family to that's better? Thanks for you input..
Stick with what you have.
Microphone is an easy fix, we just haven't gotten around to it. We have lifes to live
giveen said:
Stick with what you have.
Microphone is an easy fix, we just haven't gotten around to it. We have lifes to live
Click to expand...
Click to collapse
Thanks I tried to work around with a bluetooth headset, no joy. when I open voice search it crashes, am I wasting my time there? And thanks for all you efforts, it just that I'm an idiot buying a t-mobile 4g etc. I thought it was also PHONE! Stupid me, but for $120 I"ll beat it with a hammer until it gives in or dies.. So I'm trying correct my ignorance, and get either real or voip phone calls so a mic is kinda important.
Hey scott, you mean 10.1 has 4G band working? Ive been using R8 since thats the only one I know that uses 4G band for sure. Even tho the icon is broke. As for your R8 not booting, did you nvram flash R2 1st then cwm to R8?
I ended up back on r8, I tore everything out and started from scratch and it seems to be working pretty well now. I don't think I redid the partitions when I first rolled back from 10.1 the first time, and that caused all kinds of access errors.
Restore 2.2 found here was invaluable in rolling back all the way to 2.2 for a fresh start..
http://d-h.st/users/TheManii?fld_id=1681

[Q] Haven't flashed in a while, help please

I haven't updated my SCH-I800 in a while and I notice that there is now a stable "cm-9.1.0-p1c.zip" on the cyanogenmod site but also CM10 builds (cm-10-20130714-NIGHTLY-p1c.zip) as recently as last week. The forums for the I800 aren't up right now so I thought I'd ask here if these CM10s are actually functioning well or if they have lots of missing features. And as much as I dig, I seem to only find half working ROMs or extremely experimental ones that have basic things like WiFi missing. Is there a solid stock Samsung ROM and a solid AOSP ROM that everyone uses at this mater point in this tablet's lifespan?
And is there a new method for flashing at all? Or is ODIN still the way?
Thanks!!!
tinpanalley said:
I haven't updated my SCH-I800 in a while and I notice that there is now a stable "cm-9.1.0-p1c.zip" on the cyanogenmod site but also CM10 builds (cm-10-20130714-NIGHTLY-p1c.zip) as recently as last week. The forums for the I800 aren't up right now so I thought I'd ask here if these CM10s are actually functioning well or if they have lots of missing features. And as much as I dig, I seem to only find half working ROMs or extremely experimental ones that have basic things like WiFi missing. Is there a solid stock Samsung ROM and a solid AOSP ROM that everyone uses at this mater point in this tablet's lifespan?
And is there a new method for flashing at all? Or is ODIN still the way?
Thanks!!!
Click to expand...
Click to collapse
I have spent the last week or so trying to get an SCH-i800 to run something OTHER than the stock gingerbread well and just haven't found it yet. The closest I got was a build of CM9 but still have sporadic reboots.
It's frustrating since the only thing I want this to do is run some OBD apps for my car. The problem is that apps detect Gingerbread and run in phone mode vs. tablet mode, wasting a bunch of screen space.
Cubed has been pretty much the only non-stock rom that didn't have FC's and random reboots. I don't even use the cellular feature of this tablet - I'd be happy just disabling the modem entirely and running on wifi if it meant it being more stable.
I'm considering just getting a Nexus 7, but the problem is that this thing would need to live in my car and I don't feel like doing that with a new tablet which is why I was trying to get the i800 to work

[Q] Cm 10.2.1 And A Linksys EA4500

Updating from CM9, I notice that the phone now loses it's authentication with the router multiple times in one day. That is, the icon changes from blue to white, and no data can pass through. It is necessary to turn wi-fi off and then back on to restore the connection.
On the premises, we also have a Motorola G, Nexus 7, Samsung Galaxy Nexus and a Nexus One. All but the GNex have no problems with this router. The GNex is still stock, so it would appear to have something to do with these older Samsung phones running 4.3. Searching Google, someone suggested forcing the phone to use the 2.4 band, and doing so with the GNex doesn't completely fix it, but it does happen less often. However, I can't find a "wi - fi frequency band" setting in CM.
So, does anyone have any idea what's going on? And is there a way to force the Captivate to use the 2.4 band?
Thanks much
gibosi said:
Updating from CM9, I notice that the phone now loses it's authentication with the router multiple times in one day. That is, the icon changes from blue to white, and no data can pass through. It is necessary to turn wi-fi off and then back on to restore the connection.
On the premises, we also have a Motorola G, Nexus 7, Samsung Galaxy Nexus and a Nexus One. All but the GNex have no problems with this router. The GNex is still stock, so it would appear to have something to do with these older Samsung phones running 4.3. Searching Google, someone suggested forcing the phone to use the 2.4 band, and doing so with the GNex doesn't completely fix it, but it does happen less often. However, I can't find a "wi - fi frequency band" setting in CM.
So, does anyone have any idea what's going on? And is there a way to force the Captivate to use the 2.4 band?
Thanks much
Click to expand...
Click to collapse
CM9 is quite old, chances are that the kernel modules don't support it.
BWolf56 said:
CM9 is quite old, chances are that the kernel modules don't support it.
Click to expand...
Click to collapse
Thanks for your reply.
Before, while running CM9, the phone would remain properly connected to the router indefinitely. This problem of losing authentication did not occur until after upgrading the Captivate to CM10.2.1
gibosi said:
Thanks for your reply.
Before, while running CM9, the phone would remain properly connected to the router indefinitely. This problem of losing authentication did not occur until after upgrading the Captivate to CM10.2.1
Click to expand...
Click to collapse
Oh misread your post.
If forgetting and re-entering the network doesn't work, try another kernel (make sure it's compatible).
BWolf56 said:
Oh misread your post.
If forgetting and re-entering the network doesn't work, try another kernel (make sure it's compatible).
Click to expand...
Click to collapse
I am willing to give this a try, but I am still pretty new at this sort of thing. While I have rooted and put Cyanogen Mod on two phones, I have never tried different kernals. Would you be able to give me a short list of 3 or 4 compatible kernals that I could try?
Thanks much!
gibosi said:
I am willing to give this a try, but I am still pretty new at this sort of thing. While I have rooted and put Cyanogen Mod on two phones, I have never tried different kernals. Would you be able to give me a short list of 3 or 4 compatible kernals that I could try?
Thanks much!
Click to expand...
Click to collapse
Just look in the Dev section and use one that matches your version (4.1, 4.2, etc).
NeatKernel seems to be popular around here.
Installed NeatKernal today so will see how it goes.
Thanks much for your help!
Installing NeatKernal didn't solve the problem, so decided to try the most recent CM 11 nightly....
After installing CM 11, the router and the phone still do not play nicely together. I contacted Linksys about this issue quite some time ago, but never received a response, so it is beginning to appear that the best solution is to simply replace the router. However, the Captivate is just a spare phone to play with, so it's not worth the extra expense and time, so will probably leave things as they are...
Cheers

Categories

Resources