Im trying to install the speedmod kernel for MIUI via ODIN and it keeps failing at get PIT for mapping?! Never had this problem when flashing a kernel before.
Im on JPY firmware using JPU for partition and PIT.
Someone help please :/
Have you made sure 're-partition' is UNchecked in odin ?
and you have not loaded a PIT file have you ??
could you post a screen shot of what odin looks like before you press start ?
Related
Hi, I got the JPY ROM from the thread in the general discussion, and any time i have tried to flash it onto my phone, the phone refuses to start properly. It just vibrates a couple of times and black screens.
I am using Odin 1.3 and PIT 512 for this as it says on SamFirmware.com.
Is this the ROM not working properly, or me doing something wrong?
Mate did you click repartition in odin?If you did then you SHOULDNT!!!!
Try to get in to recovery mod with the 3 button combo and make a factory reset if yo had NOT clicked repartition.
In case had HAD clicked repartition in Odin then i guess you ll have to download a foul stock firmware and flash it.Meaning a firmeare that has Modem and CSC files aswell and not only PDA file...
I'm just about to flash XXJPY and I was just wondering, do I have to unroot 'before' flashing the single file (pda) XXJPY or can I leave it as is..?? Does it make any difference..??
Thanks
tackygr said:
Mate did you click repartition in odin?If you did then you SHOULDNT!!!!
Try to get in to recovery mod with the 3 button combo and make a factory reset if yo had NOT clicked repartition.
In case had HAD clicked repartition in Odin then i guess you ll have to download a foul stock firmware and flash it.Meaning a firmeare that has Modem and CSC files aswell and not only PDA file...
Click to expand...
Click to collapse
haha, thanks mate, i forgot to try that, i'll give it a go later.
topcat888 said:
I'm just about to flash XXJPY and I was just wondering, do I have to unroot 'before' flashing the single file (pda) XXJPY or can I leave it as is..?? Does it make any difference..??
Thanks
Click to expand...
Click to collapse
nah you dont need to have it rooted to flash JPY.
I believe the JPY file in the general forum is just an upgrade / high level package which is why you dont tick repartition. Usually look for posts by Richthofen- hes the dude who converts it to mid level packages so you can couple it with a CSC and modem.
hi there same thing happened to me i updated this thru samsung kies im stock at black screen would factory reset make my phone work again? i need help please please please
dopeee said:
nah you dont need to have it rooted to flash JPY.
I believe the JPY file in the general forum is just an upgrade / high level package which is why you dont tick repartition. Usually look for posts by Richthofen- hes the dude who converts it to mid level packages so you can couple it with a CSC and modem.
Click to expand...
Click to collapse
I am already rooted so should I un-root before flashing or just leave it rooted..???
And also have SGS Battery Icon Mod installed, again does this have to be un-installed before flash or not..??
Can someone post a link to the right ROM that I can use to update using ODIN that will not result in existing data lost ? The one that I downloaded is a single tar file (Size - 298,890KB) that contains these files. If this is the right file, do i just specify the tar file in the PDA and uncheck repartition ?
modem.bin
param.lfs
zimage
cache.rfs
factoryfs.rfs
Hello,
I just wanted to upgrade to XWJS5, so I flashed JPU with 512 pit and re-partition checked (so then after it I flash JS5 with 803 pit and no re-partition)
Now odin is stuck on "Set Partition" stage and my phone doesn't even show any progress, what should I do?
I don't want to brick my phone
Please answer me ASAP, my phone is stuck here now
The USB is still connected... anyone please?
did you definitely uncheck re partition ??? and have you got all 3 files ??
I flashed stock JS5 with 512 pit (even tho samfirmware says 803 pit )
and its worked like a charm,,, dont panic just breathe and relax and try again.
I'm flashing JPU right now not JS5. You know because JS5 has only 1 file if I flash it alone phone wont bootup.
Re-partition is on, pit is 512, firmware is JPU and CSC/Modem files are selected correctly. Will my phone brick if I unplug it or maybe close odin?
IT WILL BRICK but it will just be a soft brick which means you can fix it by flashing another ROM thru odin...
you will be fine just make sure download mode works after u unplug it
and also js5 comes in 3 files now its on here somewhere,,, download that and flash it
So shall I unplug it now or close odin? And after i've unplugged it, should i re-open odin or keep it there and press flash button?
Can you please give me the 3 files JS5 link? I found one but i'm not sure if it's the correct one.
well you cant keep it plugged in forever lol, unplug it, restart odin. make sure kies (if you have it) is closed (even in the icon tray) and download XWJS5 link is below. flash that with PIT and RE-PARTITION and that should fix it
http://forum.xda-developers.com/showthread.php?t=955712
Try this too http://forum.xda-developers.com/showthread.php?t=954377 its a more in-depth instruction guide
Issue solved, thanks alot!
hey guys need ur help ^^
think my sgs is bricked tried to flash several stock roms but every time it freeze at dbdata.rfs
dunno what to do .. :S
Can you give some more info please. What ROMs and PIT? And does the phone boot at all?
personally i'd try darkyys ressurection rom with the pit that comes with it and repartition checked.
not had a hole yet that it hasnt gotten me out of.
It's not bricked, i've using a "update" ROM (most of ROM dumped from Kies spoofing) with re-partition under Odin => It's doesn't work because these update ROM doesn't in 99% of time the dbdata.rfs which is need for repartition.
If you want to use pit file and repartition, you must use a "Full" ROM like JPU ou XEN JS5 available on SamFirmware.
Hello, im new to the world of galaxy note phones and need to flash N7000JPKJ4_OJPKJ3_XSG_Android_2.3.5 firmware through ODIN. I extracted the file and found just one tar file. Where do i select this file and do i need to select re-partition and pit file?
Thank you.
DO NOT, i repeat..DO NOT ever, check repartition or load a pit file.. this is the only known way to get a sure brick... you dont really ever need to flash a pit file unless you mess up your partition table.. if you look around the forum, the first rule of odin flashing is we do not play with pit files
unleashed12 said:
DO NOT, i repeat..DO NOT ever, check repartition or load a pit file.. this is the only known way to get a sure brick... you dont really ever need to flash a pit file unless you mess up your partition table.. if you look around the forum, the first rule of odin flashing is we do not play with pit files
Click to expand...
Click to collapse
So, i get it...i will not check re-partition and pit file..also should i select tar file in PDA?
andrew21 said:
So, i get it...i will not check re-partition and pit file..also should i select tar file in PDA?
Click to expand...
Click to collapse
yes.
10chars.
DO NOT CHECK RE-PARTITION
just select .tar file through PDA on Odin and let it do it's thing!
i have a problem cz i did PIT with u1_02_20110310_emmc_EXT4.pit
and now my phone is stuck but i still can enter download modem and odin read the phone.i have N7000JPKK2
Please help me!!
Hello! I am really tensed about my phone. its hard bricked.
I tried flashing the wrong firmwares and roms in it.
my phone is galaxy s2 i9100, thats what the back part says
I cant go to the recovery mode but only the download mode where I tried flashing some other roms but every time it says FAIL!
i am very tensed of what to do, my phone gets stuck every time of factory something when sometimes it hangs while flashing.
please help me anyone!!:crying::crying::crying::crying::crying::crying:
I can't believe I overlooked such a vital detail when flashing with Odin...
I flashed UVKB5_Deodexed_Stock_Voodoo_odin.tar.md5.tar (which is for T959) with pit512 with re-partition checked on a vibrant i9000m which was originally on I9000UGKG3.
Once the flash completed, the phone was looping. Couldn't get to recovery mode, but was able to get into download mode.
So I flashed I9000UGKG3 stock with pit512 and re-partition checked, but now I'm getting boot loop up to the splash screen but it just repeats itself. It did enter recover right after the flash but I am not able to return to it anymore even with button combos.
What should I do at this point?
EDIT: Right after flash, in the recovery screen, it said the following "E:failed to mount /dbdata (File exists)" and plenty other red text...
Just flash the stock firmware for your phone via Odin.. Put the single file u get in pda... U can download it from Samfirmware.com for your respective country...
If my post helped, don't mind hitting THANKS
am i suppose to re-partition and do I use a pit file? If so, which one?
thanks
trojjanhorse said:
am i suppose to re-partition and do I use a pit file? If so, which one?
thanks
Click to expand...
Click to collapse
don't tick on repartition.. And no pit file is required.. Only a .tar file LL be there.. So just put it in PDA and flash..
If my post helped, don't mind hitting THANKS