Related
Hi, got a new tytn11 phone and was trying to follow the flash but messed up lol.
all i get now is a blank screen (black) with green led on.
thank you in advance for any help you can give.
dvkmartin said:
Hi, got a new tytn11 phone and was trying to follow the flash but messed up lol.
all i get now is a blank screen (black) with green led on.
thank you in advance for any help you can give.
Click to expand...
Click to collapse
u should read the sticky here:
http://forum.xda-developers.com/showthread.php?t=369282
u can definitely find the answer.
Were you trying to flash a stock ROM or a cooked ROM?? If it was a cooked ROM did you have Hard SPL on your PDA before flashing??
Please post your ROM, Radio ROM number if you can recollect the same.
hi i didn`t get as far as flashing i think. i didnt read the info right had no hard spl installed, it all went wrong whebn i pressed the camera power and done a reset, all i got next was a black screen nothing else.
sorry dont know what version things are only got the phone 2 days ago lol and was playing.
OK.. you never actually connected your phone to the comp and tried flashing a ROM?? did you try a hard reset?? you need to press the two soft keys (the ones above the explorer and messaging buttons) and simultaneously reset the phone using the stylus.
Follow the instructions on screen when you are asked to press the send key.
NOTE: all your contacts and data will be lost when you hard reset, but phone will be back in its factory state.
i formated the sd card with a program the format went ok then a message poped up saying you are still here somethink has gone wrong, then i pressed the camera and power button and done a soft reset now i just have a blank screen with green led on.
Have tried hard reset but nothing happens. the green and red button and the reset ?
Also did not have it connected to pc everything was done via sd card
dvkmartin said:
i formated the sd card with a program the format went ok then a message poped up saying you are still here somethink has gone wrong, then i pressed the camera and power button and done a soft reset now i just have a blank screen with green led on.
Have tried hard reset but nothing happens. the green and red button and the reset ?
Also did not have it connected to pc everything was done via sd card
Click to expand...
Click to collapse
Check my signature to know how to hardreset.
thankyou will try that now are the soft keys the call and hang up buttons?
just tried that with the keys above ie and messages but my key pad lights dont come on it like the phone is turned off accept one green led top of phone.
dvkmartin said:
thankyou will try that now are the soft keys the call and hang up buttons?
Click to expand...
Click to collapse
no :http://www.pdamobile.cz/pict/news/htc_tytn_2-hard_reset.jpg
thank u for the pic yes tryed that, the only thing that happens is the green led goes out nothing else.
dvkmartin said:
thank u for the pic yes tryed that, the only thing that happens is the green led goes out nothing else.
Click to expand...
Click to collapse
u need to hold the stylus in the hole a few seconds, if that will not help, I suggest u to read the "kaiser wiki troubleshoot section", there is an answer for sure.
ok thank you will have a look now.
is there a way to enter boot loader and gets the 3 color screen without using the volume key, by using the keyboard instead???
my x1 has no rom so it cant be turned on and the volume key is dead.
how can i flash a Rom??????????
darkylight said:
is there a way to enter boot loader and gets the 3 color screen without using the volume key, by using the keyboard instead???
my x1 has no rom so it cant be turned on and the volume key is dead.
how can i flash a Rom??????????
Click to expand...
Click to collapse
Having no ROM installed (i.e. via Task29) does not mean the vol key method won't work. It should work - remove battery, replace battery, hold power and vol key together for a few seconds. The only reason it wouldn't is if there was something physically wrong with the key.
Jezza0 said:
Having no ROM installed (i.e. via Task29) does not mean the vol key method won't work. It should work - remove battery, replace battery, hold power and vol key together for a few seconds. The only reason it wouldn't is if there was something physically wrong with the key.
Click to expand...
Click to collapse
yup via task 29, mtty. i think there is a wrong in the volume key coz its not working any more.
is there a way to boot via keyboard or my x1 is dead?
are you sure
all you have to do is hold the vol DOWN and power until screen comes up
darkylight said:
is there a way to enter boot loader and gets the 3 color screen without using the volume key, by using the keyboard instead???
my x1 has no rom so it cant be turned on and the volume key is dead.
how can i flash a Rom??????????
Click to expand...
Click to collapse
had the same issue mate....and now my x1 is bricked!...couldn't do anything to get it back into tri-colour screen and sent it back to repair...tried to use the usb, mitty and nothing....good luck if you find another method....i hate task29 now i wouldn't try that thing again on my new phone...i did everything correctly and it just completely died on me...
has your volume key always been dead
yea, me 2, my volume key dead
so i cant do task29 before flash a new rom
i search a long time
but cant find solutions
had to send it back to repair the hardware problem
Hi
Try this this i tried might be work for you too...
Put image file in root now run Task29 and as soon as the tri colour screen comes remove the usb cable and wait for 2 minutes it will search for serial and will automatically boot from SD image..
Thanx
darkylight said:
is there a way to enter boot loader and gets the 3 color screen without using the volume key, by using the keyboard instead???
my x1 has no rom so it cant be turned on and the volume key is dead.
how can i flash a Rom??????????
Click to expand...
Click to collapse
What do you get when you just turn on your phone? You can always turn on your phone, if you have a ROM flashed it will boot the ROM. If not or not properly flashed then it will take you to the bootloader....
Lokatho said:
What do you get when you just turn on your phone? You can always turn on your phone, if you have a ROM flashed it will boot the ROM. If not or not properly flashed then it will take you to the bootloader....
Click to expand...
Click to collapse
how could your phone auto loading bootloader without a rom and volume down key press?
is your phone made from E.T ? he can do it auto intelligently
dont bull**** before u r clear the problem and situation
my words is rude ,but ur words totally leading the guy into wrong direction ,and waste our time
o0k00l said:
Hi
Try this this i tried might be work for you too...
Put image file in root now run Task29 and as soon as the tri colour screen comes remove the usb cable and wait for 2 minutes it will search for serial and will automatically boot from SD image..
Thanx
Click to expand...
Click to collapse
bull**** 2
how could he do task29 with volume key and a flashed rom ?
dont wast our time
o0k00l said:
Hi
Try this this i tried might be work for you too...
Put image file in root now run Task29 and as soon as the tri colour screen comes remove the usb cable and wait for 2 minutes it will search for serial and will automatically boot from SD image..
Thanx
Click to expand...
Click to collapse
lol.. your barking at the wrong tree man.. read & understand
don't know if this is related but i thought i'd post it still.
i had an issue with task29 once i tried it.
usually, i flash roms using activesync since i'm kinda lazy putting back and fort the x1 cover, battery and all that.
after flashing task29, my x1 went dead. what i did, i removed the sd card,
plugged it to my pc and put the kovsimg file of the rom i like best,
plugged back in the sd card with the kovsimg file and re-flash via sd card method (using soft keys & volume button).
viola! it worked! but then again, i guess that's the way it's suppose to be done anyways.
simpleguy said:
how could your phone auto loading bootloader without a rom and volume down key press?
is your phone made from E.T ? he can do it auto intelligently
dont bull**** before u r clear the problem and situation
my words is rude ,but ur words totally leading the guy into wrong direction ,and waste our time
Click to expand...
Click to collapse
Ever did a bad flash???? Try it....flash from your pc and pull the USB cable. If you reset your phone where does it take you? Certainly not to boot the ROM, because the flash went wrong.
Well.....
As the OP doesn't tell us specific details about why or how his X1 has no ROM, I'm trying to get some more info on his problem.
So keep your rude words in your mouth before you speak...!
Since when does trying to help someone wastes your time???! Dude you really need to utter your frustrations somewhere else.
simpleguy said:
bull**** 2
how could he do task29 with volume key and a flashed rom ?
dont wast our time
Click to expand...
Click to collapse
Man...you're really sour aren't you?
Lokatho said:
Ever did a bad flash???? Try it....flash from your pc and pull the USB cable. If you reset your phone where does it take you? Certainly not to boot the ROM, because the flash went wrong.
Well.....
As the OP doesn't tell us specific details about why or how his X1 has no ROM, I'm trying to get some more info on his problem.
So keep your rude words in your mouth before you speak...!
Since when does trying to help someone wastes your time???! Dude you really need to utter your frustrations somewhere else.
Man...you're really sour aren't you?
Click to expand...
Click to collapse
laugh out loudly, bull**** again
his volume key is dead, and his phone dont have rom in it
and u, smart u , tell him flash a rom ? and pull cable blah blah
is it ridiculous?
how could he into bootloader in this situation?, perhpas u r god could let it done
once again, plz clear the situation, before you answer it(read op`s post again and again , ok ?)
u guys hand-up is appreciate ,but non-sense
u just waste our time
i wont relpy anymore untill u can provide a doable solution
simpleguy said:
laugh out loudly, bull**** again
his volume key is dead, and his phone dont have rom in it
and u, smart u , tell him flash a rom ? and pull cable blah blah
is it ridiculous?
how could he into bootloader in this situation?, perhpas u r god could let it done
once again, plz clear the situation, before you answer it(read op`s post again and again , ok ?)
u guys hand-up is appreciate ,but non-sense
u just waste our time
i wont relpy anymore untill u can provide a doable solution
Click to expand...
Click to collapse
Really sad.....I pity you.
As I want to help the OP, but as helping the OP wasted you're time I'm not. As I don't want to waste your time....
djromeo said:
had the same issue mate....and now my x1 is bricked!...couldn't do anything to get it back into tri-colour screen and sent it back to repair...tried to use the usb, mitty and nothing....good luck if you find another method....i hate task29 now i wouldn't try that thing again on my new phone...i did everything correctly and it just completely died on me...
Click to expand...
Click to collapse
thanks for helping mate, i will send my phone to sonyericsson shop wish they could help me
o0k00l said:
Hi
Try this this i tried might be work for you too...
Put image file in root now run Task29 and as soon as the tri colour screen comes remove the usb cable and wait for 2 minutes it will search for serial and will automatically boot from SD image..
Thanx
Click to expand...
Click to collapse
can u send me some details and steps how to do this, i will try it
thanks
simpleguy said:
laugh out loudly, bull**** again
his volume key is dead, and his phone dont have rom in it
and u, smart u , tell him flash a rom ? and pull cable blah blah
is it ridiculous?
how could he into bootloader in this situation?, perhpas u r god could let it done
once again, plz clear the situation, before you answer it(read op`s post again and again , ok ?)
u guys hand-up is appreciate ,but non-sense
u just waste our time
i wont relpy anymore untill u can provide a doable solution
Click to expand...
Click to collapse
guys come om plz i appreciate all your kind help really am desperate and wish i could get my phone back.
yup my phone has no rom so i couldnt flash any rom coz my volume key is died. NO NEW ROM AND NO BOOTLOADER.
i guess that there is no solution other than i should sent it back to the shop to be repaired but if there is a solution i wont regret to try it on my phone.
thanks all for your help.
Hello! I had this problem a minute ago. Try this:
1 -Turn on the phone. The screen will freeze in Sony Ericsson logo.
2 - After this, hold the two silver front buttons and press the softreset button behind the battery cover (to do a Hard Reset).
3 - Follow the instructions to perform the Hard Reset.
4 - When finished, remove the battery. Wait for 3 seconds and put the battery back.
5 - Now try to hold Vol Down key and turn the phone on.
It worked for me. But OMG, this thing scared me...
I tried to unlock my diamond, now it turns over, I try a hard reset, it works not so.
when I plug in the charger, the LED does not light.
what should I do, help me pls!
Here is the link where I downloaded the flash: ppcgeeks.com/Diamond/Users/Tob...20Unlocker.rar[/url]
Yep, just did the same.. Got an error that it was the wrong model id at the end. Now i cant enter bootloader, its a brick.
http://forum.ppcgeeks.com/showthread.php?t=36062
Have you tried going back into bootloader via the power button and volume down?
I have the same problem.
Did you solve it or not?
If you did what did you done?
you can not solve this problem my friend becouse i made the same thing and the phone is dead....I just found some litle informations in my searches and it can be done only by jtag mode
so if u are an expert and if u have a programmer u maybe can do this.....
here is the link : http://forum.revskills.de/viewtopic.php?f=25&t=117[/URL]
Maybe Ill can Help
Once i stuck in the boot of my phone in a rom everytime i turned it on ? oO but i solved the problem (after 2 ****in weekz without phone)
But this is what i Did
Ill simply pressed this at same time(Vol down, reset button & back arrow)
and deleted the which deleted the old OS backup (your phone still works)
and then i turned it off and pressed the same combo again
which will turn your phone in USB mode then put it into ur PC u maybe wont see it but that doesnt matter the same happened 2 me just go 2 HTC website from ur country and download the latest ROM update they got and let it load into and when ur done just reset ur phone and everything should be OK u can just load a new custom rom (Note u need HardSPL Installed i do not think u can do without ) just PM me if u need more help
blackster said:
Once i stuck in the boot of my phone in a rom everytime i turned it on ? oO but i solved the problem (after 2 ****in weekz without phone)
But this is what i Did
Ill simply pressed this at same time(Vol down, reset button & back arrow)
and deleted the which deleted the old OS backup (your phone still works)
and then i turned it off and pressed the same combo again
which will turn your phone in USB mode then put it into ur PC u maybe wont see it but that doesnt matter the same happened 2 me just go 2 HTC website from ur country and download the latest ROM update they got and let it load into and when ur done just reset ur phone and everything should be OK u can just load a new custom rom (Note u need HardSPL Installed i do not think u can do without ) just PM me if u need more help
Click to expand...
Click to collapse
I tried this with mine and it did nothing. Anyone else have any ideas?
thanks.
EDIT: I got mine working by pressing Power + Vol Dwn + Enter (circle button) + reset and hold them till the screen turns white. then follow the steps on the screen.
Sorry, but I have a big big problem. I have an x1, and I flashed the previous version of Energy Rom on the sd card. BUT I wanted to re-flash these, and the phone blocked in initial screen..the update rom one..
So, every time I try to update, it starts and after a few second, and when it start to update, the screen turns off. Finally, anyone can help me? I don't know how I can fix this situation PLEASE, HELP ME!!
Thanks, Fabio
Remove your Micro SD-CARD, and enter in flash mode! Volume down + power on!
Open the Update Phone Utility with the rom of your choice! Remember to rename your rom to: KOVSIMG.nbh
Sorry for English.
Faffa_mcr said:
Sorry, but I have a big big problem. I have an x1, and I flashed the previous version of Energy Rom on the sd card. BUT I wanted to re-flash these, and the phone blocked in initial screen..the update rom one..
So, every time I try to update, it starts and after a few second, and when it start to update, the screen turns off. Finally, anyone can help me? I don't know how I can fix this situation PLEASE, HELP ME!!
Thanks, Fabio
Click to expand...
Click to collapse
first time u must delete first the previous version on ur sd card... than u can update the new one... and dont forget to tasks 29 before u flash the rom...
Sorry guys, but when I enter in flash mode, and I press the power button and it should load the ROM, instead it always restart after 2-3 second. I don't know what to do..please help me!!
It sounds to me that you're not holding the buttons down correctly
paul c said:
It sounds to me that you're not holding the buttons down correctly
Click to expand...
Click to collapse
I tried again, but the result is the same.. uff..
hardspl
Faffa_mcr said:
I tried again, but the result is the same.. uff..
Click to expand...
Click to collapse
1. Try to pull up the batery for 10 menute.. and replace it again.. and press volume down and the power button together and dont realese until the boot screen appear...
2. connect ur x1 with the computer and hardspl the phone with the new spl 0.78.. when its finish the phone will restart.. pull the batery again for 1 menute.. and replace again... go to bootloader screen again like i explain in point 1.. after that conect again ur x1 with computer... do task29.. when finish its will restart again...
after u do task29.. u can flash ur x1 with the computer or with storage card..
this was the link for SPL 0.78 and task29 and if u still confused... http://www.826x.blogspot.com/
i think you can't flash the energy rom and always fail.. because u not hardspl your x1..
ahmadin said:
1. Try to pull up the batery for 10 menute.. and replace it again.. and press volume down and the power button together and dont realese until the boot screen appear...
2. connect ur x1 with the computer and hardspl the phone with the new spl 0.78.. when its finish the phone will restart.. pull the batery again for 1 menute.. and replace again... go to bootloader screen again like i explain in point 1.. after that conect again ur x1 with computer... do task29.. when finish its will restart again...
after u do task29.. u can flash ur x1 with the computer or with storage card..
this was the link for SPL 0.78 and task29 and if u still confused... http://www.826x.blogspot.com/
i think you can't flash the energy rom and always fail.. because u not hardspl your x1..
Click to expand...
Click to collapse
Sorry, I tried to connect the x1 to pc..but the pc doesn't recognize the phone..
I looked that the power button have a red light, and when this turn off, it go to bootloader mode, but after few second (it's in update mode) the phone turn off..
Someone has the same problem? I don't know what to do, I'm desperate! I can't use my phone
first remove sd card.
then pull out battery, press power button without battery on phone for about 30 sec.
then place battery. try to hard reset without OS:
press and hold both softkeys of X1, and press power button to turn on phone. but don't release softkeys until appears blue text with white background. slide put keyboard press R, wait to complete then press SPACE.
phone will be hard resetted. if not helped to boot OS, or there's no OS, or you did task29 before then do another task29 after this prosedure.
hope it helps
Faffa_mcr said:
Sorry, I tried to connect the x1 to pc..but the pc doesn't recognize the phone..
Click to expand...
Click to collapse
did you try another usb port of PC?
orkhanahmadov said:
did you try another usb port of PC?
Click to expand...
Click to collapse
mmm no...but I think that's another problem, coz when I put the phone on ac mode, it's the same situation...
orkhanahmadov said:
first remove sd card.
then pull out battery, press power button without battery on phone for about 30 sec.
then place battery. try to hard reset without OS:
press and hold both softkeys of X1, and press power button to turn on phone. but don't release softkeys until appears blue text with white background. slide put keyboard press R, wait to complete then press SPACE.
phone will be hard resetted. if not helped to boot OS, or there's no OS, or you did task29 before then do another task29 after this prosedure.
hope it helps
Click to expand...
Click to collapse
orkhanahmadov said:
did you try another usb port of PC?
Click to expand...
Click to collapse
Very good explaination....
Faffa_mcr said:
mmm no...but I think that's another problem, coz when I put the phone on ac mode, it's the same situation...
Click to expand...
Click to collapse
did you try method that wrote first.
and off course try another usb port, or another usb cable.
because if the phone did'nt recognized by PC, it means there's problem with cable or usb port if other things are OK.
hello,
The hd7 is stuck on the htc logo and then connect to pc
I want to know how to make it work
thank you
octopus82 said:
hello,
The hd7 is stuck on the htc logo and then connect to pc
I want to know how to make it work
thank you
Click to expand...
Click to collapse
What happened to make it get stuck on the HTC screen? Were you updating it or flashing a rom?
You can try a hard reset.
Turn the device off. If you can't turn it off with the power button pull the battery out and put it back again.
Press and hold the Volume Up and Volume Down buttons together and power the phone back on and continue to hold the Volume Up and Volume Down buttons until the factory reset screen appears and then press Volume Down to confirm hard reset.
This will wipe all your apps and data.
If that doesn't work check your SD card. It may be corupt and need to be reformatted or replaced.
the hard reset does'nt work, even by pressing the volume buttons and power I have the htc logo that appears and the connection pc
octopus82 said:
the hard reset does'nt work, even by pressing the volume buttons and power I have the htc logo that appears and the connection pc
Click to expand...
Click to collapse
what do you mean by " htc logo that appears and the connection pc" ?
the problem has been solved by flashing the boot with a special device
octopus82 said:
the problem has been solved by flashing the boot with a special device
Click to expand...
Click to collapse
what do you mean ?
there is a device that repairers possess, it is to flash the boot by soldering very fine wire on the phone (open of course!) and each phone has its own shema must be respected
I see many of you do not understand what I write, I do not know if my English is posing problem because I translated from French to English with google translate, or else it is you who did not understand the maneuvers made
octopus82 said:
I see many of you do not understand what I write, I do not know if my English is posing problem because I translated from French to English with google translate, or else it is you who did not understand the maneuvers made
Click to expand...
Click to collapse
We understand...the repair shop used a device known as Jtag or Riff box to repair you device!
It's that spammers keep reposting on this thread. There's one above this post which I'm going to report now, just like the one I reported yesterday!