I have seen that others say that their swype keyboard works. I have installed it and the keyboard pops up and I can type, but I can't swype. Is there anything that I need to do in order to get it to work correctly. I go through the Swype tutorial and the point that it instructs on how to swype it says that swyping will not work on this device.
Please help. Thanks.
You need to use DizzyDen's IMEI program. See his thread in the Development subforum.
can someone post a how to for dummies please
Related
Hi;
You can find a working version of Droidx Multitouch keyboard for MT3G with Froyo at:
http://forum.xda-developers.com/showthread.php?t=764021
And a flashable version at:
http://forum.xda-developers.com/showthread.php?p=7827701#post7827701
it works,thanks for the head's up
thanks, cant wait to try this out.
flashable installed correctly but kept getting an fc every time i tried to use the kb.
@pjdpinheiro, please list your steps
thanks
nm, I got it to work. i ssh'ed the files over to the device but permissions weren't set correcty on the 2 files which fc every time i tried to type. then tried to installed with flashable but it kept the same perms. corrected perms on the files and reboot, went to keyboard setting and adjusted lang and chose multi touch. all works well.
Installation instruction
Please tell me how to install this key board. I have tried flash and ASTRO. Both didn't working
vadlapatlap said:
Please tell me how to install this key board. I have tried flash and ASTRO. Both didn't working
Click to expand...
Click to collapse
use adb.. the link has instructions on what to do
curious
This is my new favorite keyboard, but I wonder: is there a way to better calibrate it? something like the clicker apk for htc soft kb perhaps?
great stuff. works as expected thanks. I flashed with AmonRa's 1.7 recovery, not a single FC so far. shift+letter works so multitouch is on (right?)
To apply the Flashed version, do i have to be rooted? I keep trying to root this thing but im not having any luck. I have the OTA 2.2 update running old Mytouch 3g.
nice keyboard and everything, but i cannot switch to default or any other keyboard for that matter. Constantly FCing. Any ideas on how to uninstall?
Hey everyone,
I rooted my nexus one when it was 2.2, now im trying to update to 2.2.1. However the OTA update wasnt taking, it failed and the installation aborted everytime. I search forums and found one saying to factory reset my phone, which i did. Saved everything with titanium backup. Now im stuck with:
Firmware: 2.1-update1
Kernal version:2.6.29-01117-g4bc62c2 android-build apa26#1
Build nuumber: EPE76
One problem is i do not get an OTA update to upgrade to 2.2 or 2.2.1. Also i did a manual update with signed-passion-FRF50-from-ERE27.1e519a24.zip and it fails and installation aborts. How can i get back to at least 2.2, but preferably 2.2.1.
Also when trying to restore my apps from titanium backup, it tells me my phone is not rooted, but I still see the little "padlock" unlocked when i boot my phone.
Thanks, hope someone can help
John
more
im assuming that zip wont work because im on build epe 76. Whats the best way from here to get to at least 2.2
It sounds like you need to do some reading. Look at the Nexus One wiki that's linked at the top of this forum. Read everything it has to say, then re-read.
Your questions are answered.
Not to mention the wrong forum. This is development, not Q&A.
Cheers and g/l
wiki page doesnt help at all
just read the wiki page twice, as you said. There is nothing about how to fix this issue. Sooooooooooo.....??????
i have 50+ forums and googled this issue 10+ times, not having any luck....If you cant help can you direct where i can find help????
Lol, the wiki wont show you the exact issue being resolved. You need to think between the lines, do some problem solving. Nobody on this forum is going to spoon-feed you the answer you look for.
Everything I know about the Nexus One (and Android in general) is from these forums. You aren't looking hard enough if you can't find the info you need.
So please, have enough sense next time to at least post in the correct sub-forum, instead of coming in filled with piss and vinegar making a fool of yourself.
gimpyjohn said:
i have 50+ forums and googled this issue 10+ times, not having any luck....If you cant help can you direct where i can find help????
Click to expand...
Click to collapse
1. You haven't given enough information for anyone to help direct you.
2. It sounds like your bootloader is unlocked, but you lost root. Or maybe your recovery (whichever that is) won't allow an unsigned zip.
3. But once again, this is the wrong forum. This is not the place for you to go into further detail. All it will do is piss people off who are trying to work on development, but have to wade through beggar spam. So please stop.
this is the wrong thread for what you need...mod needs to move it. Take it easy guys, he's just looking for help.
If you have Terminal Emulator from Market installed, type this:
at the $ type su ($su)
it should change to # sign
at # type whoami (#whoami)
it should replay back with "root"
If not, you have lost root and you will need to re-root your device. Please open a thread in Q&A to ask further questions.
Hello folks!
My name is olddawg, cause I am one!
Love this tablet and see you have ways of making it even better.
Would love to 'give it a go', but I can't seem to get by the first step...
I read the posts, found the ROM I'd like to try and the instructions are pretty thorough, but....
I'll be darned if I see how to back this thing up correctly before I start into any mods...
If I missed the thread, just can't find it or am too blind to see it, please point me that way.
olddawgsrule said:
Hello folks!
My name is olddawg, cause I am one!
Love this tablet and see you have ways of making it even better.
Would love to 'give it a go', but I can't seem to get by the first step...
I read the posts, found the ROM I'd like to try and the instructions are pretty thorough, but....
I'll be darned if I see how to back this thing up correctly before I start into any mods...
If I missed the thread, just can't find it or am too blind to see it, please point me that way.
Click to expand...
Click to collapse
Here's the post that I used....
http://forum.xda-developers.com/showthread.php?t=865245
follow it to the letter, I installed Vegan-TAB GingerEdition RC1
no need to do the Market fix with RC1 Vegan-TAB GingerEdition for me..
Probably should have gone this way right of the bat, but didn't...
The system has upgraded to 3588 and I don't seem to be loading clockworkmod.
I downloaded and see the install in the left corner, but can't enter it.
Shows booting a recovery kernel and loads normal....
Am i too late for the simple change?
I'm following the guide mentioned above....
Is there something different when updated to 3588?
I rooted my wifes captivate with superoneclick and tried to get it to allow non market apps and it keeps saying it failed. so i went in with an db editor and changed the 0 to a 1 as the instructions say. When i try to go into titanium back up and restore her contacts it says the phone is set to not allow non market apps. wife is pretty up set can anyone please help
Please use more descriptive thread titles.
i think it is pretty descriptive i need help. now if someone would please give me some suggestions to try instead of being a hole about it that would be nice
i agree your thread title sucks, but in Titanium Backup, have you clicked on menu, more, reload application?
tgjones85 said:
i think it is pretty descriptive i need help. now if someone would please give me some suggestions to try instead of being an asshole about it that would be nice
Click to expand...
Click to collapse
I will tell you what i think... first off that kind of language is not allowed on the forums and you can easily get banned for it. and seccond go into settings/ applications/ development and tick off unknown sources. also if all you have done is root her contact app will not be gone
mrevankyle said:
I will tell you what i think... first off that kind of language is not allowed on the forums and you can easily get banned for it. and seccond go into settings/ applications/ development and tick off unknown sources. also if all you have done is root her contact app will not be gone
Click to expand...
Click to collapse
ATT captivates do not have 'unknown sources' option on stock roms.......thank you ATT
that option is not there ive have already looked. i have the htc inpire and it does. i tried to reload the app and that did not work. when i rooted it first all her info was there. when i tried to flash a rom thats when it went south. i couldnt get it to the screen i needed so i clicked on clear data and thats when i wiped her info on the phone. i had previously backed up her info with titanium backup so that i could restore the info. froyo is running on her phone as well. since the stock rom does not allow non market apps. can i get help with flashing a rom. when i boot into recovery and try to flash i just get the first screen i cant get to the screen needed to flash. ive tried flashing CWM and it says it is successful but when i try to reinstall packages it keeps saying its aborted and will not proceed. any thoughts on this issue? i edited my first post sorry. i just hate people who are cynical and dont give any suggestions.
lets do this again today:
Captivate 3e SIGNATURE VERIFICATION ERROR
search those terms in google
or here, let me do that for you
http://tinyurl.com/3zjlnnb
seriously, 10 minutes in the forums and you would have had this answer....
Please use the search function before opening a new thread. If you wold have then your wife wouldnt be upset with you in the first place.
Thread closed
I have my nook color restored to stock and that seems fine but, when you go through the setup and you have to type your email address and password as soon as I press the space to open the keyboard it opens then closes always
Somebody please help I'm desperate!
warfexion said:
I have my nook color restored to stock and that seems fine but, when you go through the setup and you have to type your email address and password as soon as I press the space to open the keyboard it opens then closes always
Somebody please help I'm desperate!
Click to expand...
Click to collapse
No one here knows much about stock-- it's closed source by Barnes and Noble. That said, you might get a clue what is going wrong if you can get the "logcat" output (google logcat). It may require rooting stock tho. Not sure, as I've never really run stock.
warfexion said:
I have my nook color restored to stock and that seems fine but, when you go through the setup and you have to type your email address and password as soon as I press the space to open the keyboard it opens then closes always
Somebody please help I'm desperate!
Click to expand...
Click to collapse
How did you restore? I bought my NC in May and it was version 1.2 or something. There is a 1.4 update now by B&N. The point is I would try to restore again the same way you did. If that fails try the other restore version. If you got to the registration it should be working.
Finally if you didn't wipe out the recovery, 8 failed boots may restore to your factory settings. Search the forums for all of the above directions.
bowguy said:
Finally if you didn't wipe out the recovery, 8 failed boots may restore to your factory settings. Search the forums for all of the above directions.
Click to expand...
Click to collapse
If you want to learn more about the 8 failed boot procedure, look at my tips thread linked in my signature.