Hi,
My titanium backup shows:
System ROM: 334 MB (25.7 MB free).
Is this normal?
Is there a way to free more space?
Thanks in advance.
Sent from my GT-P1000 using XDA Premium App
edit : sorry wrongly answer
Mine Shows 334 MB (5.66 MB free).
Yes this is normal.
No you can't do much unless you strip the rom from things you don't need.
finally I don't think its affecting your tab's performance.
Chokran Darkpal
Is this true that different rom use diffrent capacity of System ROM?
I'm asking because I think I had more free space on stock froyo.
Right now I'm on OC RC1 and Out of 334 MB I have about 18 MB free.
Of course I've deleted some unnecessary apps.
After new install of stock gb and only titanium I had 334.
Related
Hi everyone,
I have this phone SGS i9000 but i am constantly running out of memory. Now i got the new Sims game which uses so much ram... Many times the device just starves for ram and reboots itself...
Is it possible to add more HARDWARE ram to this device?
I use Darky roms on my device and checked if i can enable some sort of swap but it is not possible or reasonable...
DaveBG said:
Hi everyone,
I have this phone SGS i9000 but i am constantly running out of memory. Now i got the new Sims game which uses so much ram... Many times the device just starves for ram and reboots itself...
Is it possible to add more HARDWARE ram to this device?
I use Darky roms on my device and checked if i can enable some sort of swap but it is not possible or reasonable...
Click to expand...
Click to collapse
it's almost impossible without soldering knowledge and a LOT of investigation
just forget a bout it
How would you add this to the PCB? I don't think there is any space left. This is not plug and play, more an embedded device. And how about the other hardware? You also need additional controllers and such things.
--> Impossible.
If you want extra ram you have to buy a new phone
What about swap memory?
hm.. i9000 is realy a low ram device.. i sell my sgs and buy a sgs2 .. a great device
my girlfrend have also 500mb ram device, she use "rammanager root" (search @play-store) it have nice settings and work realy good..
try the demo/trail.. use hardcore game mode for the sims maybe it helps a little bit
Gesendet von meinem GT-N7000 mit Tapatalk
Nope, 329MB is user accessable, 128MB is reserved for the graphics card. 55MB is inaccessible because it prevents the device from freezing up when ram is near full.
I will never buy device with less then 2GB of RAM anymore then!
Give the poor device a break, its old already.
Mate I'm running a tsunami ROM in my sgs and it has an 392mb of ROM. And this solved all my ram problems
Tried zRam?
I have an S plus (nearly the same) and i have 358mb of RAM..
Wtf guys this was posted in March, why did you revive this thread?
Sent from my GT-I9000 using Tapatalk 2
DaveBG said:
Hi everyone,
I have this phone SGS i9000 but i am constantly running out of memory. Now i got the new Sims game which uses so much ram... Many times the device just starves for ram and reboots itself...
Is it possible to add more HARDWARE ram to this device?
I use Darky roms on my device and checked if i can enable some sort of swap but it is not possible or reasonable...
Click to expand...
Click to collapse
Hi,
Replying really late , but there is a possible way >> check below -
What advantages of increasing ram on Galaxy S
Running multiple number of application at background.
Games will run smooth without any lagging.
Clear the ram memory to make your device faster.
How to Get More Ram on Galaxy S Cyanogenmod CM10 Android 4.1.1 Jelly Bean and CM 9 ICS 4.0.4 Custom ROM.
Make sure that your custom rom is loaded with devil kernel or not. For that you can check Go to Settings->About Phone. Scroll down there you can see kernel version of present rom.
Note: So if your custom rom is loaded with different kernel then you need to change it into devil kernel version.
1. Download below zip files based on your Android OS.
For ICS get here.(file name Devil3_1.0.3-ICS_i9000_CFS_BLN_CMC_20120724.zip and you can also check latest kernel version and download it)
For JB get here. ( file version 1.0.4)
2. Copy the zip file into phone sd card.
3. Turn off the device and boot into recovery mode. For that you need to press and hold Volume Up + Home + Power button together.
4. When you enter into clockworkmod recovery mode. Select the “install zip from sd card” choose the kernel zip file which you copied earlier in your phone sd card storage.
5. The kernel flashing process will take 1 min. After that reboot the device. That’s it done now your device is fully working with devil kernel.
Note: The Above process is only for who don’t have devil kernel in their Custom Rom. If you’re custom rom is already loaded with devil kernel that you can avoid above process.
Follow below steps:
1. Download devil kernel config app from Google Play here or you can get apk from here.
2. After installing the app on Galaxy S device. Go to app list section there you can see an icon with devil logo and of that app is devil kernel configure.
2. Open the application there you can get Ram Settings Option.
3. Click on it and it will show you three options of ram CM9 368 MB, XL 391 MB and last one big mem 403 Mb. Select Big mem 403 MB to make it done.
4. On the top right side. Click on setup and it will ask you to save the ram settings.
5. When you finalized the settings it indicates to restart the phone in order to make the changes.
6. After rebooting the device. Open the task manager there you will get 403 MB of Ram.
Finally you unlocked more ram on Galaxy S Device running Cyanogenmod 10 Android 4.1.1 Jelly Bean ROM.
Rgds,
Kaustav.
You can use swapper from the Google play.
Swapper create a file .swap on your sdcard and this is the RAM :fingers-crossed:
I have samsung galaxy s plus, cyanogenmod 10-20121226-ivendor-alpha6-ariesve, android version 4.1.2, kernel version [email protected] #112...how can i install this devil kernel to increase memory ram to 403? Forgot to mention that i have JellyBean
Bughyee said:
I have samsung galaxy s plus, cyanogenmod 10-20121226-ivendor-alpha6-ariesve, android version 4.1.2, kernel version [email protected] #112...how can i install this devil kernel to increase memory ram to 403?
Click to expand...
Click to collapse
If you do install that kernel you brick your phone. Check the Samsung galaxy s plus section please
Verstuurd van mijn GT-I9001 met Tapatalk
mendozza2000 said:
You can use swapper from the Google play.
Swapper create a file .swap on your sdcard and this is the RAM :fingers-crossed:
Click to expand...
Click to collapse
This is not really a viable option...
The flash drive is infinitely slower compared to RAM.
Any game demanding more RAM than can be accessed without writing to/from swap would be unplayable.
Sent from my GT-I9000 using xda premium
Rom: Mackay rom 4.9.14 (4.4.4 kitkat)
Kernel: 3.0.101-KK44-x-aries-cma
Ram: 415MB
Lack of RAM is what made me upgrade from this glorious phone to the S4.
As time went by, Android apps got bigger and heavier, making the Galaxy S unusuable alas.
I recently increased my phone's internal memory to 1GB+ and now I am thinking to increase my phone's RAM size to 1GB+. Is there any way to do this?
My phone details:
Model: GT-S5570
Baseband Version: S5570DDKQ7
Android: 2.3.6
lol to increase RAM buy a better phone XD
howlog said:
I recently increased my phone's internal memory to 1GB+ and now I am thinking to increase my phone's RAM size to 1GB+. Is there any way to do this?
My phone details:
Model: GT-S5570
Baseband Version: S5570DDKQ7
Android: 2.3.6
Click to expand...
Click to collapse
You can't increase the actual ram, but you can get SWAP. Erm SWAP is a partition that will be created on your SD card on which the users inactive processes will be moved.This will free up physical ram for the OS and the active applications
go to first link in my sig
Buy a better phone for more RAM..
Sent from my GT-S5570 using xda premium
Nahh... do you think Mini is a Laptop ? Get lost ! Get better phone !
why you laughing at our mini? i have 512+mb ram memory via Ram swapper, and it is more than enough for my multitasking...iv got **** load of apps that i use simultaniously, and need it all to work...thats how you can get enough ram for all your apps, just swap memory...but! you must be aware that you MUST have class 10 sd card, or else its gonna be a lot of freezing and fcs...
Nixoman said:
why you laughing at our mini? i have 512+mb ram memory via Ram swapper, and it is more than enough for my multitasking...iv got **** load of apps that i use simultaniously, and need it all to work...thats how you can get enough ram for all your apps, just swap memory...but! you must be aware that you MUST have class 10 sd card, or else its gonna be a lot of freezing and fcs...
Click to expand...
Click to collapse
is there any way to get this work on cm 7.2 official? can we edit kernel to suport swap?
yeah kernel support is needed but i think swap support is already baked in cm7 kernels
kernel support is needed
Ask for help to reinstall galaxy mini S5570 to increase ram and internal memory
Nixoman said:
why you laughing at our mini? i have 512+mb ram memory via Ram swapper, and it is more than enough for my multitasking...iv got **** load of apps that i use simultaniously, and need it all to work...thats how you can get enough ram for all your apps, just swap memory...but! you must be aware that you MUST have class 10 sd card, or else its gonna be a lot of freezing and fcs...
Click to expand...
Click to collapse
I had a galaxy mini run brought in Singapore in 2012 running on Froyo previously, and I had upgrade the firmware to Gingerbread in 2014 and it working fine. I had left it for sometime and now I tried to used it to run some simple program it always prompt that running out of memory and hang. I had perform factory reset to erase all the app and only running on one app also encounter problem. Could you please help, to show me how can I make make this phone working again?
my email [email protected]
I am currently at 4.1.2 and i want to upgrade to 4.2 cause my phone has gone slow.I mostly use it for messaging ,calling and
browsing.I want a rom with big battery life fast responde and more free ram (i have about 80 mb and i used to have 170 ...).Any suggestions ?
Try slimbean RC2. It meets all your requirements and is easily the most reliable custom rom I ever had on my SGS.
ntragas said:
I am currently at 4.1.2 and i want to upgrade to 4.2 cause my phone has gone slow.I mostly use it for messaging ,calling and
browsing.I want a rom with big battery life fast responde and more free ram (i have about 80 mb and i used to have 170 ...).Any suggestions ?
Click to expand...
Click to collapse
if your phone gone slow from 4.1.2, flashing to 4.2 will NOT make it faster.... Samsugn didnt update i9000 for a reason, it doesnt have enough mem for JB! So my advice is go back to stock rom, or a moded JB!
Thread closed before it turns into a Best ROM thread.
I have VJ's CM 10 4.1.2 flashed on my Nexus and I've gotta say I am very happy with this ROM.
As soon as I flashed the ROM, I installed m2sd and currently, this is my storage state:
/data - 6 Mb used out of 166
/sd-ext - 585 Mb out of 1 GB
/sd-ext/cache - 585 Mb out of 1 GB
Now, App loading takes time initially. After awhile, the app functions normally. But if there is more than one app running in the background, then all hell breaks loose. I have to wait for awhile for things to settle down.
Is there any way I can speed things up? Any thing that others have tried as well? I haven't changed any performance options (except for 16 bit transparency)
Thanks in advance guys.
sphinxcs898 said:
I have VJ's CM 10 4.1.2 flashed on my Nexus and I've gotta say I am very happy with this ROM.
As soon as I flashed the ROM, I installed m2sd and currently, this is my storage state:
/data - 6 Mb used out of 166
/sd-ext - 585 Mb out of 1 GB
/sd-ext/cache - 585 Mb out of 1 GB
Now, App loading takes time initially. After awhile, the app functions normally. But if there is more than one app running in the background, then all hell breaks loose. I have to wait for awhile for things to settle down.
Is there any way I can speed things up? Any thing that others have tried as well? I haven't changed any performance options (except for 16 bit transparency)
Thanks in advance guys.
Click to expand...
Click to collapse
I tried the seeder app and that is working great for me.
Sent from my Nexus One using xda premium
Hello to everybody
I have my Nexus One with AmonRA and CM 7.2.0 Passion (Android 2.3.7). Do I need to install BlackRose to install VJ JellyBean (CM10.1_VJ_4.2.2_V5.4) or could I install it with Amon_RA?
Thank you
Yup, you will need it to repartition your system partition. The current stock partition that you have will not work with JB roms
Sent from my Nexus One using xda app-developers app
I have some partitions yet ...
I am using Link2SD a year ago with my actual ROM, so I have two partitions in my SDCARD:
- 14,36 GB FAT
- 487,84 MB Ext4
Is that enough for JB????
Thank youuu
sphinxcs898 said:
Yup, you will need it to repartition your system partition. The current stock partition that you have will not work with JB roms
Sent from my Nexus One using xda app-developers app
Click to expand...
Click to collapse
rmrcbm said:
I am using Link2SD a year ago with my actual ROM, so I have two partitions in my SDCARD:
- 14,36 GB FAT
- 487,84 MB Ext4
Is that enough for JB????
Thank youuu
Click to expand...
Click to collapse
Its not about your SD card partitions. This is about your ROM and how it's partitioned. The stock partition that is currently present is :
145/90/Data - where 145 Mb is for your system, 90 for cache and the rest for your apps. This stock partition is enough for GB ROMs. However, for JB (esp . VJ's rom) you will need to alter your partition to : 260 for system, 10 for cache and the rest for data. That's where BlackRose comes in. It helps you reflash your partition.
Check out Black Rose here : http://forum.xda-developers.com/showthread.php?t=1270589
Sorry my ignorance. I didn't know what was "ROM stock" related to. Your explanation is perfect.
I'm having some problems of memory, despite my configuration with Link2SD and that I only have in memory applications like Google+, Link2SD, GoLauncher, ContacPlus and AlarmDroid. However is difficult to make updates without running out of memory.
I want to install JB ROM not only for his new features, I presume my problems of memory will dissapear too ... am I wrong about it?
Thank you
rmrcbm said:
Sorry my ignorance. I didn't know what was "ROM stock" related to. Your explanation is perfect.
I'm having some problems of memory, despite my configuration with Link2SD and that I only have in memory applications like Google+, Link2SD, GoLauncher, ContacPlus and AlarmDroid. However is difficult to make updates without running out of memory.
I want to install JB ROM not only for his new features, I presume my problems of memory will dissapear too ... am I wrong about it?
Thank you
Click to expand...
Click to collapse
Try M2SD
Sent from my HTC One using Tapatalk 2
FANTASTIC
Mount2SD worked really well. I uninstalled Link2SD.
Now I have no problems with memory and my Nexus One runs smoothly.
I'll wait some months for a stable JB.
THANK YOU A LOT