help me understand why i bricked my tab - Galaxy Tab Q&A, Help & Troubleshooting

Today i went and got my tablet replaced for a bad pixel. I
i pulled it out of box went into download mode and did pit,pda,modem
tmobile sgh-t849
flashed with
gt-p1000_mr.pit
GB_Stock_Safe_v3.tar
\T-Mobile Modem\modem.bin
it failed 75% and didn't really say a specific error. Its bricked doesnt turn on or go into download mode.
im not sure what i did wrong. I have performed the same steps with success in past.
Please help me figure out what i did wrong.. First time i have ever bricked and i have flashed a lot of phones.

jphilpot said:
Today i went and got my tablet replaced for a bad pixel. I
i pulled it out of box went into download mode and did pit,pda,modem
...
Click to expand...
Click to collapse
Could you have forgotten to replace the protected bootloaders?

You should have given it a full charge before you tweaked your tab.
Anyway, try to give it a full charge plugged into the wall, then try again.

So you didn't even give it a first boot? Should have at least done that and checked for protected bootloaders...
without more detail... Yeah... As ranger said, you didn't even give it a full charge?
Sent from my "better than an iPad" tab running Overcome Hermes.
Edited for swypos

i mean perhaps it was 90 percent charged
and yes i had it already booted into froyo. I mean the first one wasn't protected so i guess i jumped the gun. But i don't think the boot loader was the issue.
knew i shouldn't have put the screen protector on.. always curses me.. hehe
I did two post to revise my title to get a better answer on how to correct next time.

http://forum.xda-developers.com/showthread.php?t=1133590

Thanks. I will try but it was full battery
Sent from my SGH-T959 using XDA Premium App

can you follow the steps that in the thread i gave you ? is it so hard to listen ppl , WTH wrong with you ? posting 2 thread in the wrong section and the same question ? OMG ... i really need BANHAMMER ...

"help me understand why i bricked my vibrant"
I got slightly confused by that title..
Sent from my GT-P1000 using XDA Premium App

GANJDROID said:
"help me understand why i bricked my vibrant"
I got slightly confused by that title..
Sent from my GT-P1000 using XDA Premium App
Click to expand...
Click to collapse
you'll shock if you know that he post this Q in the general section 2 times ....

i didn't mean to post twice...
you guys are trolls...
I bricked my device and i was quite upset... Why i reposted smart guy was to redo the title so that someone would verify my steps were correct.
You havent shown me anything yet that answers my questions. Sending me to a Q & A post didn't help anything. I read that **** before i even even bought the phone. I don't need you to tell me the differences between bricks..
the **** charged all night last night and i let it run all the way down before hoping it would discharge. I had just flashed my other one that had a bad pixel the night before and i had no issues. I did the same steps as before.
i find it funny you guys are more worried about where i posted then the actual issue.
If you want to talk about a waste.. you have wasted space with your nonsense all day replying to this thread with no useful information.
This is my 6 android device and first one i even bricked so spare me. I followed the steps exactly just like i did the day before with no issues. Your so cool sending me to the Q & A because i posted twice.

All I said is that I got confused by your title. That's it. I didn't come here to troll or say that you shouldn't post here or there or anything like that.
Sent from my GT-P1000 using XDA Premium App

Moved to Q&A, OP, you can edit the title of a thread by editing your original post, then clicking "go advanced"
Lets keep it civil and help this guy get his tab fixed eh folks......

to the OP .. can you tell me what tab you have , your firmware ? ? old stock rom you have ? lets go serious now

I went to tmobile and got my old one back.
I returned the bricked one and got back the one with 1 dead pixel. I already had it good to go with 2.3.3 so im going to leave it alone for now.
It would be nice if i could still understand why it happend.
it came with froyo
tmobile sgh-t849 2.2
i flashed the GB_Stock_Safe_v3.tar which is 2.3.3. It just said failed with no other information. At this point i would be weary of using odin on my desktop.
iv used odin alot in the past and never really had any issues

is your tab can call ? sorry for my dumb question .. your tab is GSM P1000 ?

@OP can you be more fast to reply . its 4:33am here .. so be fast !!!!!!!!!!!!!!!!!!!!

The OP has already told us TWICE that his device is a Tmobile SGH-T849 meaning that it is NOT an SGT-P1000

yeah Mokhattab , i know , thats why i wanna just show him what he did ...
though his tab can't get the Gingerbread right , either the Stock safe from yours ...
@OP thats why you bricked your tabb

k0sh said:
yeah Mokhattab , i know , thats why i wanna just show him what he did ...
though his tab can't get the Gingerbread right , either the Stock safe from yours ...
@OP thats why you bricked your tabb
Click to expand...
Click to collapse
I beg to differ
@OP
There is no reason why you can't flash Overcome
Having a TMO SGH-T849 is certainly no brickable offence in terms of using Overcome
While the problem may no longer exist, it's definitely worth investigating to know why you had problems (also to get you over your newly acquired fear of Odin )
Is there the slightest possibility the cable was nudged or such?
You seem to be comfortable using ODIN and your setup must be OK if you've flashed your current Tab before so I'm thinking it might have been a freak accident of some sort

Related

Is this a new one?

So about a week ago I tried to flash the alpha honeycomb rom. Played around with it a bit, but since Im in India I need my Tab to make calls via wifi back to the states, so I restored back to just before the flash. Then I saw there was a new build of Koush's kernal so I flashed that. About 3 days ago I started getting a weird wifi modem error and I would have to reboot to get wifi back. I just thought at first it was because the internet at my hotel isnt exactly amazing, and maybe i was building up a cache somehow? Honestly didnt really have a clue, but I didnt really care. Last night it got strange tho, I suddenly only had .90 mb of internal storage. I couldnt do anything because i had 0 space. So I deleted a few apps as fast as I could and used titanium to move everything else to the SD. I rebooted into cwm and wiped the cache, dalvik cahce, and even factory reset to no avail. then I downloaded the newest Koush rom thinking that if I just flashed another rom Id be fine because it would repartition and start fresh. Apparently not so much. I just bootlooped at the Verizon screen somehow. So again, thinking i knew what I was doing, tried to restore. Nooooothing again. Then I had to go to work so I got a buddys laptop and rebooted into download mode, installed heimdall on the pc and proceeded to try to flash the stock files from this thread: http://forum.xda-developers.com/showthread.php?t=955342&highlight=vzw ... thought all would be well, but I got an error saying descriptor not found. So i reinstalled the driver thinking that was the error I got. Tried again and got an error -12. So i unplugged to see if I could do aaannnything in cwm... and my screen did this... has anyone seen this or know how screwed I am?? Im in Mumbai for 12 more days and I think Ive had the tab for about 2.5-3 months so far... kinda screwed huh?
Don't worry!
This is my icon, I have been friend of it. My Tab still surive, see my signiture.
You will be back soon, I belive.
By the way, yours is CDMA , right?
Sent from my GT-P1000 using XDA Premium App
i cant see your sig
rainbow ng said:
Don't worry!
This is my icon, I have been friend of it. My Tab still surive, see my signiture.
You will be back soon, I belive.
By the way, yours is CDMA , right?
Sent from my GT-P1000 using XDA Premium App
Click to expand...
Click to collapse
You don't have a signature right now, just sayin'.
This statament :
Sent from my GT-P1000 using XDA Premium App
state I am using the Tab to browse through the forum
If u using GSM tab, I think I can help
Your case seem the stock rom u mentioned is not a full set rom with modem and phone, try to unzip the rom,is there dbdata.rfs? the icon only mean software brick which will back to life easily.
sadly im using cdma
Dude calm down. Thats an alternative download mode. Find a cdma stock firmware that you had search around for it. follow the guide of reflashing and you should be up and running again
Have a look at this thread: http://forum.xda-developers.com/showthread.php?t=967175
This is the one that worked for me. Good luck!
So why have you posted in this forum?
The "non forum mod" mod strikes again... In his usual manner.
Sent from my "better than an iPad" tab.
so I made an attempt to flash the stock files. Hiemdall said it worked, but the progress bar on the tab never went past about halfway, overnight. Now it wont show that download screen unless its plugged into a power source and it turns itself off randomly then immediately turns back on into the download screen and does that process repeatedly. If I plug into the pc it is unresponsive and then turns off after a few min WTF did I dooooo?!?!
TheAdmira1 said:
so I made an attempt to flash the stock files. Hiemdall said it worked, but the progress bar on the tab never went past about halfway, overnight. Now it wont show that download screen unless its plugged into a power source and it turns itself off randomly then immediately turns back on into the download screen and does that process repeatedly. If I plug into the pc it is unresponsive and then turns off after a few min WTF did I dooooo?!?!
Click to expand...
Click to collapse
If you plug into a power source, without trying to turn your Tab on, do you get a battery icon?
Sounds like your battery is dead, in which case, if you can get it to charge you may yet be able to reflash...
Try letting it charge for at least a few hours and then take another crack at flashing.
btyork said:
The "non forum mod" mod strikes again... In his usual manner.
Sent from my "better than an iPad" tab.
Click to expand...
Click to collapse
Because im sick of seeing non-dev posts in the dev section. Its irritating to see and baffling how anybody could not have enough common sense to realise that posting stuff like this in here is wrong, We have a Q&A and Gen forum for that.
Because there doesn't seem to be any active Tab mods here to move/move, the only way make the users who make the posts in here aware is to tell them. If they are not made aware they will post their next topic here.
If nobody else is prepared to make them aware and to try and cut the crap down, I will, and don't care what you think.
when i had the origional error that you had it was because i tried flashing a kernel via heimdell on a virtual machine. i had the same screen, when i got to work the next day with a laptop that was windows i just booted into download mode and flashed a working kernel and it booted right up.
TheATHEiST said:
Because im sick of seeing non-dev posts in the dev section. Its irritating to see and baffling how anybody could not have enough common sense to realise that posting stuff like this in here is wrong, We have a Q&A and Gen forum for that.
Because there doesn't seem to be any active Tab mods here to move/move, the only way make the users who make the posts in here aware is to tell them. If they are not made aware they will post their next topic here.
If nobody else is prepared to make them aware and to try and cut the crap down, I will, and don't care what you think.
Click to expand...
Click to collapse
I agree that the forums need clearing. But you ploughing into every single misplaced thread isn't going to help.
You do realise you can tell the op that this isn't the right forum AND help them and point them in the right direction. Doesn't sound too hard right? Maybe try it sometime.
Sent from inside a whale.
GANJDROID said:
I agree that the forums need clearing. But you ploughing into every single misplaced thread isn't going to help.
You do realise you can tell the op that this isn't the right forum AND help them and point them in the right direction. Doesn't sound too hard right? Maybe try it sometime.
Sent from inside a whale.
Click to expand...
Click to collapse
And I do!
The point is that the help/advice had already been given on this one but nobody made the Op aware that he/she had posted in wrong place so would have likely done same again next time.
If nobody tells them how will they know? (apart from the obvious, ie reading forum titles.)
TheATHEiST said:
And I do!
The point is that the help/advice had already been given on this one but nobody made the Op aware that he/she had posted in wrong place so would have likely done same again next time.
If nobody tells them how will they know? (apart from the obvious, ie reading forum titles.)
Click to expand...
Click to collapse
I posted here because in other forums the general is mostly for those who have not rooted, and also have not flashed. In most cases people that know what theyre doing tend to only frequent the Dev sections, between that and the fact that all of my issues came from posts in the Dev section I thought this would be the correct place for it. apparently I am wrong, and sooo thankful that someone as heroic as yourself has stepped up to do away useless threads since we obviously have a space limit in our forum. wouldnt want to bog down our servers with my useless post of course...
regardless of the flaming and trolling... im still screwed, my post isnt moving and i will continue to ask those that know for help. thanks for the advice though, ill take it into consideration for my next post... now run along...
I have charged for about 9 hours now and still nothing could i have fried it somehow? If I bring it to verizon in the state its in, is there anyway for them to tell i flashed it? or will they just assume i did since it is pretty much in a state of brickiness as far as i can tell...
TIA and thanks to those whos British bigotry hasnt stood in the way of reading my post and attempting to lend a hand... where i come from the main purpose of a forum is to ask those who know for help and share the knowledge weve attained...
and im not getting a battery icon when i plug in, just the flashing on and off of the alternate download screen
thanks again
Ok to put this at rest coz its getting irritating. You are active old users. And you believe that tab needs more forum modding. I dunno what are the rules but when applying for a mod positions open apply or root for a candidate like yourself or nautious or bytork or anyone.
As for op does your tab get identified by your computer in odin or heimdell? As i said thats an alternate download mode. If computer identifies it. You can get a shot at flashing. Do it via a windows computer please. If tab is fried beyond repair which i doubt verizon will never know you flashed unless you tell them of course
sadly as of now the tab isnt read by the comp and i cant keep it in the download mode unless its plugged in

Brand new bricked please help!

Ok lets get straight to the point, I got a brand new captivate from at&t. Ive always used custom roms but never had an android. So of course i wanted to flash a custom rom. So i prepared my phone and followed ALL instructions for flashing a custom ROM. I couldnt run any update.zip files thoe because of the stupid verify thing. So LISTEN, I took the patch that patches 3e recovery back to 2e recovery aka kernal swap.....then everything worked fine and i got cwm to load and installed Apex_7.
AFTER the install was complete i was so excited. I selected reboot now, the AT&T logo came up and then the screen went all jacked up(looked like a broke screen) then went to the samsung logo and just keeps replaying it.
So after seeing this i freaked out and pulled the battery. Then i went and researched before doing anything else i came to the conclusion i needed to download odin pre-packed so i downloaded the odin stock installer.
Now LISTEN I put my phone into download mode ran odin and it said it succesfuly installed after about 3 minutes. So i then turn the phone off then turned it back on, it booted to the at&t logo then the screen goes black and loads at&t logo again (constant loop that heats the phone up)
AND NOW if i try to get into download mode it goes to the battery screen with no animation just a battery and a loading symbol
ALSO( I have made a usb jig ) BUT my ohm meter will not read the resistance of more than 2 resistors when i add the third one it reads it really fast and then shows nothing.
PLEASE HELP ME I LOVE THIS PHONE MORE THAN MY IPHONE OR MY HTC.
Credit will be given. I know someone here can save me from the dreaded face-to-face with at&t!!!!
Edit: Also when i got the phone i noticed a line of dead pixels on the left side very hard to see unless u look closely think i could get the phone replaced by using this as my excuse. idk what to say to AT&T if i do have to return. But i really hope not ive never ever had such problems flashing anyphone.
Please do not double post. You already asked (correctly) in the Apex sticky. No need to start another separate thread.
I posted both places because my problem may or may not be related to Apex. If Apex has nothing todo with my problem then i have correctly posted here.
Edit: Im trying to kill 2 birds with 1 stone
You are not fully bricked if your phone powers on at all. Just need a working jig. You can buy them from multiple sources
Sent from my I897 using XDA Premium App
Miami_Son said:
Please do not double post. You already asked (correctly) in the Apex sticky. No need to start another separate thread.
Click to expand...
Click to collapse
I noticed you are running a captivate. Any idea's on what my problem may be?
Corrupt boot loader, 100% brick. Any tips links or any info would be very helpful.
yaboydrew said:
I noticed you are running a captivate. Any idea's on what my problem may be?
Corrupt boot loader, 100% brick. Any tips links or any info would be very helpful.
Click to expand...
Click to collapse
I don't help people who think they are justified in double posting despite it being clearly against the forum rules.
mcord11758 said:
You are not fully bricked if your phone powers on at all. Just need a working jig. You can buy them from multiple sources
Sent from my I897 using XDA Premium App
Click to expand...
Click to collapse
Finally shed me some light. Thats awsome dude thanks. I made my jig exactly how they make theres it wont work. The only thing i can think is im touching the wrong pins. I touch the top and bottom pins on the micro usb closest to the 3.5mm headphone jack???
It takes allot of trail and error and if the resistance is not right it won't work. purchase one from somewhere, search captivate usb jig on youtube, should find a source
Sent from my I897 using XDA Premium App
Miami_Son said:
I don't help people who think they are justified in double posting despite it being clearly against the forum rules.
Click to expand...
Click to collapse
Now your spamming my thread with non-sense if you dont want to help then go on about your business. I simply told you I DONT KNOW IF ITS RELATED TO APEX OR NOT THATS WHY I POSTED BOTH PLACES. SORRY, you dont have to act immature and exclude me from help. (whats the point of this forum then) Now i know dont post in 2 places because arrogant people will be sure to add frustration to your problem.
Don't mind the bs, just get yourself a jig and hope it works
Sent from my I897 using XDA Premium App
mcord11758 said:
Don't mind the bs, just get yourself a jig and hope it works
Sent from my I897 using XDA Premium App
Click to expand...
Click to collapse
Thanks il try a couple more times with my homemade jig if not il purchase one.
Thanks again.
You'll need to build a new jig or buy one(Moiletechvideos is what I would suggest), because if you can't get into download mode then you cannot be helped any further. And Miami_Son is right, you're not exempt from the rules. I realize it can be frustrating if something goes wrong, but you need to just cast that aside for the time being.
Superalpaca said:
You'll need to build a new jig or buy one(Moiletechvideos is what I would suggest), because if you can't get into download mode then you cannot be helped any further. And Miami_Son is right, you're not exempt from the rules. I realize it can be frustrating if something goes wrong, but you need to just cast that aside for the time being.
Click to expand...
Click to collapse
Ok i had my buddy come over and tried his jig that he bought online it looked like it had been manufactured just to be a jig we plugged it in and nothing ? any ideas
and i posted in the Apex thread to see if anyone could link my problem to apex then i also posted a similar story here to find a solution to my problem the Apex thread is just to narrow down the cause.
First, what is your phones revision ( on the back of phone, like 1008 ,1101 etc. ) i would just start over. Get that
phone in download mode, search for A10 TOOLBOX/captivate toolbox, everything you need is there. Two. Did your 3button combo work before? And your sure you cant get into recovery by your buttons?
rwells813 said:
First, what is your phones revision ( on the back of phone, like 1008 ,1101 etc. ) i would just start over. Get that phone in download mode, search for A10 TOOLBOX/captivate toolbox, everything you need is there. Two. Did your 3button combo work before? And your sure you cant get into recovery by your buttons?
Click to expand...
Click to collapse
I appreciate you taking your time to help. My phone is the SGH-I897 i could still use the 3 button combo before Odin and recovery but after i ran odin thats when everything got really jacked up now i cant get into recovery or download i think im not doing this jig thing right but if im correct i have a striped usb plug. With the screen facing down i have three prongs on the bottom and two on the top i touch the far right prongs top and bottom and hold for about 10 seconds. Thanks dude seriously I just got this phone and loved it but got tired of at&t bloating my phone with bs that eats my memory.
EDIT: the number next to the big CE is 0168 or what u might want is 1105 rev 0.4
EDIT: Also i dont understand what the diff is between rogers 2.6 and captivate 2.5 and how can i use these tools without a booting phone.
yaboydrew said:
Ok i had my buddy come over and tried his jig that he bought online it looked like it had been manufactured just to be a jig we plugged it in and nothing ? any ideas
and i posted in the Apex thread to see if anyone could link my problem to apex then i also posted a similar story here to find a solution to my problem the Apex thread is just to narrow down the cause.
Click to expand...
Click to collapse
Does your buddies JIG work just fine in other phones? If so you may have a short in pin 4 or 5 of your USB port. Are you able to issue the "adb reboot download" command when the phone is bootlooping? I have ADB command videos on youtube just search for them for help on that. Either way if you can't get it resolved with any conventional methods, I can restore the phone using advanced JTAG just PM me for info.
connexion2005 said:
Does your buddies JIG work just fine in other phones? If so you may have a short in pin 4 or 5 of your USB port. Are you able to issue the "adb reboot download" command when the phone is bootlooping? I have ADB command videos on youtube just search for them for help on that. Either way if you can't get it resolved with any conventional methods, I can restore the phone using advanced JTAG just PM me for info.
Click to expand...
Click to collapse
ive searched around on using adb i dont get how it will work do i download the android sdk and run cmd and cd:/ the adb then execute command but i thought in order for the phone to communicate with the adb wouldnt it have to be in debug mode and booted up
yaboydrew said:
I appreciate you taking your time to help. My phone is the SGH-I897 i could still use the 3 button combo before Odin and recovery but after i ran odin thats when everything got really jacked up now i cant get into recovery or download i think im not doing this jig thing right but if im correct i have a striped usb plug. With the screen facing down i have three prongs on the bottom and two on the top i touch the far right prongs top and bottom and hold for about 10 seconds. Thanks dude seriously I just got this phone and loved it but got tired of at&t bloating my phone with bs that eats my memory.
EDIT: the number next to the big CE is 0168 or what u might want is 1105 rev 0.4
EDIT: Also i dont understand what the diff is between rogers 2.6 and captivate 2.5 and how can i use these tools without a booting phone.
Click to expand...
Click to collapse
No problem bro, if i help just hit thanks. If cant figure our making the jig, i would just buy. Its a good investment for the future especially if tour flashing roms. Mobiletechvideos has one for 8 bucks and ships in couple days. They work wonders. The A10 toolbox/ captivate toolbox. Worka great, just search google and. Install it. Its got everything youll need packed inside. EX: it comes with the drivers, odin1click and 3buttonfix odin ( which youll need to do)
It also comes with the pda and tar files youll need, it also lets you root it but i suggest the one click root for captivate, get all that done first and well go from there.
Deleted double post
rwells813 said:
No problem bro, if i help just hit thanks. If cant figure our making the jig, i would just buy. Its a good investment for the future especially if tour flashing roms. Mobiletechvideos has one for 8 bucks and ships in couple days. They work wonders. The A10 toolbox/ captivate toolbox. Worka great, just search google and. Install it. Its got everything youll need packed inside. EX: it comes with the drivers, odin1click and 3buttonfix odin ( which youll need to do)
It also comes with the pda and tar files youll need, it also lets you root it but i suggest the one click root for captivate, get all that done first and well go from there.
Click to expand...
Click to collapse
Thanks man, i just got to get it into download mode. I shoulda just bought a jig in the first place i spent 20 bux on the materials to make a jig. Im inpatient person il trial and error for hours before waiting a couple days for a jig but i dont see why my homemade jig would be any dif from theres it consist of 301k resistance and a micro usb

Got a busted i9000? help resurrect all i9000s!

Hey, the i9000 is the most requested device for the UnBrickable Mod. I need one to remove the processor and perform the initial research. If you've got a busted device in the drawer, I could make use of it. It would help the community...
Here's what we have so far:
Captivate: http://forum.xda-developers.com/showthread.php?t=1206216
Vibrant: http://forum.xda-developers.com/showthread.php?t=1273083
Epic: http://forum.xda-developers.com/showthread.php?t=1274999
Wave: http://forum.xda-developers.com/showthread.php?t=1250270
Droid Charge: http://forum.xda-developers.com/showthread.php?t=1245391
Yet, no i9000. I need a board for research to make this happen.
I hope someone has bricked his I9000 cuz i really want to see the Unbrickable mod on I9000!!
Thanks for all ur work Adam, always a ur fan!! XD
PS: unfortunately (or fortunately) i have never hard bricked my I9000, is quite lucky!
Sent from my GT-I9000 using Tapatalk
I've flashed mine many times and this thing is as close to unbrickable as I've ever seen.
Hope that hasn't cursed my next flash
chillibanana said:
I've flashed mine many times and this thing is as close to unbrickable as I've ever seen.
Hope that hasn't cursed my next flash
Click to expand...
Click to collapse
Hardly. they're very easy to brick. You've just been following the rules. Don't clutter this thread.
chillibanana said:
I've flashed mine many times and this thing is as close to unbrickable as I've ever seen.
Hope that hasn't cursed my next flash
Click to expand...
Click to collapse
Start playing with bootloaders a bit and if you then don't end up with a dead humingbird then report here! Flashing roms cant brick your sgs! In 99% cases!
Sent from my GT-I9000 using xda premium
Bump! I need a dead i9000/i9001/i9003/i9010 board to remove the processor and map out the modification. This will enable serious development on the i9000 platform.
Unbrickable?
AdamOutler said:
Hey, the i9000 is the most requested device for the UnBrickable Mod.
What is Unbrickable mod? I mean is it a ROM or is it something like JIG?
AdamOutler said:
If you've got a busted device in the drawer, I could make use of it. It would help the community...
I maybe able to help just let me check with a friend of mine tommorow and will get back to you afterwards.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
shomanadeh said:
AdamOutler said:
Hey, the i9000 is the most requested device for the UnBrickable Mod.
What is Unbrickable mod? I mean is it a ROM or is it something like JIG?
AdamOutler said:
If you've got a busted device in the drawer, I could make use of it. It would help the community...
I maybe able to help just let me check with a friend of mine tommorow and will get back to you afterwards.
Click to expand...
Click to collapse
Its on the front page of XDA right now. Its a hardware mod that lets you recover using only software from that point forward.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I have the i9000m but collecting dust until i decided to play around a bit..i have followed vibrant mod way... i had it totally bricked prior..(i9000m) it looks similar same as the vibrant. Anyways. it keeps shutting off after flash and doesnt come back on..(My Defn of bricked.. black screen, no response when power button pushed.. back heats up when connected, no lights no sound no nothing), but i did the mod according to "looks" and what i got was a surprise..lol. it went into dl mode.., after a short lived hurray.. and all of sunday.. trying various combinations. to flash it.. everytime i flashed it rebooted (purposeelyy), and it never turned back on,
Im in canada.. the phone is ffrom bell
---------- Post added at 06:28 AM ---------- Previous post was at 06:23 AM ----------
im thinking of sending it to you, the thing with the 3rd chip(you did say that it wasnt needed...ehehe lets say my fingers slipped and i never really found where that tiny little part went......maybe the soldering iron ate it..but if there is a fix.. hey.. i wouldnt mind but.. at least i have a better looking paperweight...ill give it a few more days then its off to you

[Q] Phone bricked?

hey guys i searched and havent really found anything that matched quite what i had going on so here we go... I was 95 percent through flashing the ICS rom it got through the hboot section and rebooted.. on the screen i saw two arrows in circular form above a phone .. and something was definitely being downloaded.. then the phone went black, doesnt go into hboot, doesnt a charging light when plugged in , but is picked up by the computer, ie. connection noise. Im in no way a noob at flashing roms , but something is definitely wrong with my phone.. Any ideas? It was charged full battery by the way.. it does glow in a dull light when i push volume down and power, or power alone...
Your phone indeed seems to be bricked. The identification noise from the computer may just mean that your USB is receiving power from the battery.
When my friend had a similar problem with his Amaze, he went to the HTC service center and they replaced his phone after keeping it for 4 days
So taking it to bestbuy to get it serviced is probably the only alternative, since its insured through them... lol just my luck
I brick mines as well. If you love your device stay away ics for now .
Sent from my Galaxy Nexus using xda premium
Dxtra said:
I brick mines as well. If you love your device stay away ics for now .
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
That's not fair to say. There's plenty of users that flashed without bricking their devices.
I followed the alternate directions here and had no issues.
Dxtra...I was able to do it no problems...saying to stay away is not at all accurate unless u cannot fully comprehend the instructions...never tell ppl to shy away from improvements because u urself did not succeed just offer warning...it is the linux way
Sent from my HTC PH39100 using XDA
meatwad0222 said:
Dxtra...I was able to do it no problems...saying to stay away is not at all accurate unless u cannot fully comprehend the instructions...never tell ppl to shy away from improvements because u urself did not succeed just offer warning...it is the linux way
Sent from my HTC PH39100 using XDA
Click to expand...
Click to collapse
I'm not the only one with a brick device, there's plenty more on here. Our phone is a pretty expensive device if you got the money and you want to take the risk go ahead. Why would I tell anyone to flash when is not safe to.
Sent from my Galaxy Nexus using xda premium
Dxtra said:
I'm not the only one with a brick device, there's plenty more on here. Our phone is a pretty expensive device if you got the money and you want to take the risk go ahead. Why would I tell anyone to flash when is not safe to.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Not sure why you keep posting it's not safe. I think I've seen like 3 people who've screwed it up out of probably 100+ installs. PirateGhost has released an ICS RUU which is completely noob proof so even unrooted users can get some ICS love before the OTA update.
As far as im concerned each one of us is responsible for what happens to our phones, warnings are put for a reason.. ive jailbroken, rooted the hardest of phones .. it was just my time for the inevitable to happen. I get my phone back in three days and you can be sure ill be back here again doing crazy rooty stuff to my phone no rom or dev should be held responsible for what ive done ..
Sent from my MB860 using Tapatalk
dusty2422 said:
Not sure why you keep posting it's not safe. I think I've seen like 3 people who've screwed it up out of probably 100+ installs. PirateGhost has released an ICS RUU which is completely noob proof so even unrooted users can get some ICS love before the OTA update.
Click to expand...
Click to collapse
Saying something is noob proof will inevitably prove that some where some noob will sow its not noob proof. I'll admit there were a few moments of panic when I flashed the zip method pg released. When that happened I just breathed deep and took my time and everything worked great in the end. I personally feel that what the devs have put out there is fairly safe as long as the directions are followed exactly.
Sent from my HTC PH39100 using xda premium
Dxtra said:
I'm not the only one with a brick device, there's plenty more on here. Our phone is a pretty expensive device if you got the money and you want to take the risk go ahead. Why would I tell anyone to flash when is not safe to.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I don't have the money to buy tons of new devices....its about knowing ur own limitations...do not criticise a devs hard work when it is proven to work...no its defenitly not idiot proof but it is very easy...I've done it to 3 phones already with no problems...the devs are not responsible for bricked phones
Sent from my HTC PH39100 using XDA
yea i must say it was a hundreed percent my fault in bricking my device so im not mad at anyone..and as far as the money goes its not a super big deal..i always make more o and btw im gonna be getting my replacement today and im gonna try this all again aft6er reading everything again and again and agian o and again lol
So, the phone is bricked. I have the same problem as the OP. I Lost access to Hboot while flashing ICS. I accidently sent it to recovery after Hboot update...and it never recovered LOL. Anyone know a good de-bricking service or know how much it will cost if I send it back to HTC or AT&t to fix it? I bought mine at the AT&T store, so no protection plan. I'm gonna get another device anyway (from Best Buy this time), but it would be great to have the Vivid back as a backup.
I bricked my phone Sunday night, still not 100% sure what I did wrong but it did what yours is doing now. I simply called the AT&T exchange by mail and used the factory warranty. Granted I guess there is a slight chance they could find out it was rooted (if they can somehow get it to recover or even turn on) but it got me a replacement... Food for thought.
Btw I got the new one and used the RUU and it worked seamlessly.
Sent from my HTC PH39100 using xda premium
bsSkunkApe said:
So, the phone is bricked. I have the same problem as the OP. I Lost access to Hboot while flashing ICS. I accidently sent it to recovery after Hboot update...and it never recovered LOL. Anyone know a good de-bricking service or know how much it will cost if I send it back to HTC or AT&t to fix it? I bought mine at the AT&T store, so no protection plan. I'm gonna get another device anyway (from Best Buy this time), but it would be great to have the Vivid back as a backup.
Click to expand...
Click to collapse
I did the same thing, selected recovery right after successful HBoot update. Then afterwards, each and every restart shows searching sd card with a black background. After several attempts of pulling battery, reinsert and power button + vol down, I was able to get back into HBoot. From there I immediately flash recovery through fastboot and now am happily on ICS.
If you did the same and phone boots up with the searching sd screen, there is a shot of bring it back.
dizzyraider said:
I did the same thing, selected recovery right after successful HBoot update. Then afterwards, each and every restart shows searching sd card with a black background. After several attempts of pulling battery, reinsert and power button + vol down, I was able to get back into HBoot. From there I immediately flash recovery through fastboot and now am happily on ICS.
If you did the same and phone boots up with the searching sd screen, there is a shot of bring it back.
Click to expand...
Click to collapse
Fraid it doesn't search for anything. I posted in the threads and tried everything I could think of and everything that was suggested. Though there isn't much you can do besides keep removing the battery and trying vol dn + pwr. Just a black screen.
Just a few things I tried (removed battery each time)- vol down + power (no sd card in) = blank black screen
vol down + power (with sd card and PH39IMG file) = blank black screen
vol down + power > boots to blank black screen, wait few seconds > press power button (like I'm going to fastboot) > plug into computer > type fastboot command into command prompt = command prompt says waiting for device
I always read the directions and threads a bunch of times before doing anything. Did lots of reading, google-ing, and searching. Fraid it bit the dust. I appreciate the help though. This is the first device snafu I've had. I've never had to send a phone in for any kind of warrantee work before. Hence my question above about getting it fixed.
Just in case, if it were to boot to that screen, what would I want to do? Just the PH39IMG? Or is there some other procedure?
Dxtra said:
Why would I tell anyone to flash when is not safe to.
Click to expand...
Click to collapse
Who TOLD you to flash the phone??? When I got my first android phone, a Samsung Fascinate, I LOVED the phone but nervous AS HELL that I would brick the phone. And I read, and read, and REREAD, trying to make sure I understood everything so that when I went looking for help, I at least could say, "Yes, I already tried this, this, and this".
I think the key thing to all of this is in two-fold - one, as someone stated before, this is a developer's forum. If you work on your car, and forgot to put oil in it, are you going to blame your mechanic? If you change your brakes and did not do something correctly, causing an accident, are you going to blame the car manufacturer??? Two, it states in MANY places, before you post, READ, READ, READ. It was actually ADVISED to NOT FLASH this ROM...
From this point forward, it almost seems as if there needs to be a waiver release to download roms, stating you will not ridicule nor torment the developers. And though I had heard about it but never seen it before, as I am on my 4th Android phone, there definitely are a few VERY NOTICEABLE disrespectful and ungrateful individuals in this forum. If you were my kid, and acted like that to me for something I GAVE YOU, I would do the same as PG - TAKE IT WAY and forget you.

[Q] insert brick type here...i need your help guys

Okay, obviously I was rooted. Everything was great. I went into CWM, when I was going to flash a simple script mod (which every phone can use) well I accidently clicked off into my SGII files (which of course was stupid of me) and it installed fluxii kernel for SGH-i777. (intern flashes a custom recovery for the xx tweaker that that particular kernel uses. Of course, I didn't even realize I had done it, just went to Reboot Now. Now, I've got no Download mode, no bootloader, no anything, just blackness, I feel as if there is a simple key process or way to somehow get it fixed so I can flash it back via ODIN, but with all the confusing button combo's and ideas I've found so far, and all the ' types of bricks ' I dont know the best route about doing this, whomever helps me get my phone unbricked/unsoftbricked/superbricked/cute bricked, which ever version (assuming its possible) I swear on my life I will mail them a 32GB HP touchpad.
(I have 3 and only need 2) so, I hope this in some way will get me an answer soon.
I cantbelieve I pulled a n00b. No more not moving data from SD cards for me ever again...
Thanks, and the sooner the better.
Mail me here, or gmail me ( [email protected]) or heck text me if you want (i have my SGII still) just message me priavtely for the number. Thanks you guys you're the best.
kobos311 said:
Okay, obviously I was rooted. Everything was great. I went into CWM, when I was going to flash a simple script mod (which every phone can use) well I accidently clicked off into my SGII files (which of course was stupid of me) and it installed fluxii kernel for SGH-i777. (intern flashes a custom recovery for the xx tweaker that that particular kernel uses. Of course, I didn't even realize I had done it, just went to Reboot Now. Now, I've got no Download mode, no bootloader, no anything, just blackness, I feel as if there is a simple key process or way to somehow get it fixed so I can flash it back via ODIN, but with all the confusing button combo's and ideas I've found so far, and all the ' types of bricks ' I dont know the best route about doing this, whomever helps me get my phone unbricked/unsoftbricked/superbricked/cute bricked, which ever version (assuming its possible) I swear on my life I will mail them a 32GB HP touchpad.
(I have 3 and only need 2) so, I hope this in some way will get me an answer soon.
I cantbelieve I pulled a n00b. No more not moving data from SD cards for me ever again...
Thanks, and the sooner the better.
Mail me here, or gmail me ( [email protected]) or heck text me if you want (i have my SGII still) just message me priavtely for the number. Thanks you guys you're the best.
Click to expand...
Click to collapse
I would rccomend trying to use Odin to see if it recognizes your phone? You may have to get a USB jig to force it into download mode and you may be able to save it that way I'm pretty sure a jig would work
Sent from my GT-N7000 using xda premium
Yeah thats Kinda my thinking as well unfortunately, Why the hell cant they sell them at like, I derno, the "rooted developer" store? hell Samsung should just include them in the box with as easy as root is. lmao What I don't get, is why the hell someone can't make a ' USB JIG ' out of their computer, or you know, something to tickle that little ports happy spot lmfao
kobos311 said:
Yeah thats Kinda my thinking as well unfortunately, Why the hell cant they sell them at like, I derno, the "rooted developer" store? hell Samsung should just include them in the box with as easy as root is. lmao What I don't get, is why the hell someone can't make a ' USB JIG ' out of their computer, or you know, something to tickle that little ports happy spot lmfao
Click to expand...
Click to collapse
Yeah, I'm mean there pretty cheap online and if you have the buts you can make your own since its only a 300k resistor. I think that's your only way out tbh :/
Sent from my GT-N7000 using xda premium
I just wanted this issue brought to attention to all the people from other forum sites ive tried to try their methods clearly, Marshmellows and Chicken dumplins wouldnt work, so if we could figure it out here, itd be nice to have it in a smart people zone. seriously someone f'n said, for me to stick my finger where the socket meets the charger... i was like, "consider me "BRICKED"
why cant they sell these damn jigs on craigslist for immediate satisfaction? oh well some idiot just offered to trade me one of my 3 SGII's I own for a note and 50 bucks haha "I WANT IT UNROOTED AND NORMAL" was his email. hahaha
kobos311 said:
I just wanted this issue brought to attention to all the people from other forum sites ive tried to try their methods clearly, Marshmellows and Chicken dumplins wouldnt work, so if we could figure it out here, itd be nice to have it in a smart people zone. seriously someone f'n said, for me to stick my finger where the socket meets the charger... i was like, "consider me "BRICKED"
why cant they sell these damn jigs on craigslist for immediate satisfaction? oh well some idiot just offered to trade me one of my 3 SGII's I own for a note and 50 bucks haha "I WANT IT UNROOTED AND NORMAL" was his email. hahaha
Click to expand...
Click to collapse
Lol, how much would you be willing to sell your touch pad for by the way? And eBay is probably a good bet for a jig. Its just a pain nearly all of them are sent from china so you have to wait like 2 weeks :/
Sent from my GT-N7000 using xda premium
IN TRUE NERD FASHION: any devices you'd be willing to part with for one or two of them, I have 10 16gb the day I remember telling mom "MOM LET ME BORROW 2000 dollars I swear it will pay off take it out of my savings anything" haha...
but cash isnt whats important to me, just technology really..idk, hell they're going for ridiculous onebay right now. and err, lets just say mine dont run CM9, or MIUI, hell I have my own recovery, Webos is all i knew for a while. I was always scared to post here, for the number of n00b post haters. I just stopped caring about those haha. I also have 2 Palm pre 2's running Android via a glitch in the Launcher/Wallpaper, and a Pre 3 Running ICS hybrided with basically the apps running in the 'recent windows ' version of ICS....
I really dunno man right now is I NEED TO GET THIS NOTE FIXED ASAP anyone know like a local place to go get it fixed temporarily they've gone to before. hell XDA should buy like shipments of them. we're the only ones that buy the damn things anyway.
also one more idea i found is this: idk if it just doesnt make sense to me, but if someone can make sense of it for me, and tell me its worth a shot...by all means..explain. http://samsunggalaxyreview2.blogspot.com/2011/07/one-click-unbrick-tool-for-samsung.html
kobos311 said:
also one more idea i found is this: idk if it just doesnt make sense to me, but if someone can make sense of it for me, and tell me its worth a shot...by all means..explain. http://samsunggalaxyreview2.blogspot.com/2011/07/one-click-unbrick-tool-for-samsung.html
Click to expand...
Click to collapse
It might be worth a go man. I would reccomend having it plugged into a computer and keep trying to turn it on even if the screen doesn't turn on and see if Odin picks anything up. Its not going to hurt your device anymore :/ you could always go to a hardware store and buy a mini USB and a 300k resistor and trying to make a jig yourself if that unbrick doesn't work (which I don't think it will)
Sent from my GT-N7000 using xda premium
Well what do I have to lose? Potentially (with better instructions of course and a noob friendly UI) if it works on my note, ill try it on my original galaxy...who knows few tweaks and maybe all these folks suffering from bricked Notes/SII/SIII's will have an easy way to fix it. (hey guys, just let me be optimistic here.. at least unti somebody else comes up with a bright idea haha
Quote of the day:
"I feel the same way about apple as I do herpes.
First good news (ill just edit this post from now on), I see alot of really weird things going on in my Device Manager, or well things that weren't there prior...time for phase 1.
kobos311 said:
First good news (ill just edit this post from now on), I see alot of really weird things going on in my Device Manager, or well things that weren't there prior...time for phase 1.
Click to expand...
Click to collapse
What have you done so far?
Sent from my GT-N7000 using xda premium
Fixed. I'll write up a XDA guide, and no I didnt use that silly guide. I used a trick the stupid guy at samsung tech support told me about something on the back of the phone will write up in a bit.
it involves a paperclip, and a hidden compartment behind somewhere where most would never dare stick anything, its rather a hidden reset button or something I wouldnt recommend it to anyone however...if someone finds themself in a bind id gladly help, but its that way or shipping it back if done wrong basically I just got lucky.
so CLOSE THREAD PLEASE THANKS
Red brick with white cement pattern, I dig that type of brick
Sent from my GT-N7000 using Trolltalk2000
kobos311 said:
Fixed. I'll write up a XDA guide, and no I didnt use that silly guide. I used a trick the stupid guy at samsung tech support told me about something on the back of the phone will write up in a bit.
it involves a paperclip, and a hidden compartment behind somewhere where most would never dare stick anything, its rather a hidden reset button or something I wouldnt recommend it to anyone however...if someone finds themself in a bind id gladly help, but its that way or shipping it back if done wrong basically I just got lucky.
Click to expand...
Click to collapse
McGuyver type nice. That or prevert sticking things in dirty places
Sent from my GT-N7000 using Tapatalk 2

Categories

Resources