Hey, the i9000 is the most requested device for the UnBrickable Mod. I need one to remove the processor and perform the initial research. If you've got a busted device in the drawer, I could make use of it. It would help the community...
Here's what we have so far:
Captivate: http://forum.xda-developers.com/showthread.php?t=1206216
Vibrant: http://forum.xda-developers.com/showthread.php?t=1273083
Epic: http://forum.xda-developers.com/showthread.php?t=1274999
Wave: http://forum.xda-developers.com/showthread.php?t=1250270
Droid Charge: http://forum.xda-developers.com/showthread.php?t=1245391
Yet, no i9000. I need a board for research to make this happen.
I hope someone has bricked his I9000 cuz i really want to see the Unbrickable mod on I9000!!
Thanks for all ur work Adam, always a ur fan!! XD
PS: unfortunately (or fortunately) i have never hard bricked my I9000, is quite lucky!
Sent from my GT-I9000 using Tapatalk
I've flashed mine many times and this thing is as close to unbrickable as I've ever seen.
Hope that hasn't cursed my next flash
chillibanana said:
I've flashed mine many times and this thing is as close to unbrickable as I've ever seen.
Hope that hasn't cursed my next flash
Click to expand...
Click to collapse
Hardly. they're very easy to brick. You've just been following the rules. Don't clutter this thread.
chillibanana said:
I've flashed mine many times and this thing is as close to unbrickable as I've ever seen.
Hope that hasn't cursed my next flash
Click to expand...
Click to collapse
Start playing with bootloaders a bit and if you then don't end up with a dead humingbird then report here! Flashing roms cant brick your sgs! In 99% cases!
Sent from my GT-I9000 using xda premium
Bump! I need a dead i9000/i9001/i9003/i9010 board to remove the processor and map out the modification. This will enable serious development on the i9000 platform.
Unbrickable?
AdamOutler said:
Hey, the i9000 is the most requested device for the UnBrickable Mod.
What is Unbrickable mod? I mean is it a ROM or is it something like JIG?
AdamOutler said:
If you've got a busted device in the drawer, I could make use of it. It would help the community...
I maybe able to help just let me check with a friend of mine tommorow and will get back to you afterwards.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
shomanadeh said:
AdamOutler said:
Hey, the i9000 is the most requested device for the UnBrickable Mod.
What is Unbrickable mod? I mean is it a ROM or is it something like JIG?
AdamOutler said:
If you've got a busted device in the drawer, I could make use of it. It would help the community...
I maybe able to help just let me check with a friend of mine tommorow and will get back to you afterwards.
Click to expand...
Click to collapse
Its on the front page of XDA right now. Its a hardware mod that lets you recover using only software from that point forward.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I have the i9000m but collecting dust until i decided to play around a bit..i have followed vibrant mod way... i had it totally bricked prior..(i9000m) it looks similar same as the vibrant. Anyways. it keeps shutting off after flash and doesnt come back on..(My Defn of bricked.. black screen, no response when power button pushed.. back heats up when connected, no lights no sound no nothing), but i did the mod according to "looks" and what i got was a surprise..lol. it went into dl mode.., after a short lived hurray.. and all of sunday.. trying various combinations. to flash it.. everytime i flashed it rebooted (purposeelyy), and it never turned back on,
Im in canada.. the phone is ffrom bell
---------- Post added at 06:28 AM ---------- Previous post was at 06:23 AM ----------
im thinking of sending it to you, the thing with the 3rd chip(you did say that it wasnt needed...ehehe lets say my fingers slipped and i never really found where that tiny little part went......maybe the soldering iron ate it..but if there is a fix.. hey.. i wouldnt mind but.. at least i have a better looking paperweight...ill give it a few more days then its off to you
Related
I installed the odin one click from the CAPTIVATE .... and now the phone only flashes AT&T LOGO the usb is not working any more, not charging not doing anything, and i can't get it by any means in download mode or other mode again. The only thing it will do is flash AT&T logo.... can i get it fixed. or i will have to put it for sale as parts ? thanks hope someone can give me a good advice and help me repair it ...
MC Mate said:
I installed the odin one click from the CAPTIVATE .... and now the phone only flashes AT&T LOGO the usb is not working any more, not charging not doing anything, and i can't get it by any means in download mode or other mode again. The only thing it will do is flash AT&T logo.... can i get it fixed. or i will have to put it for sale as parts ? thanks hope someone can give me a good advice and help me repair it ...
Click to expand...
Click to collapse
It can definitely be fixed, it's just a matter of how easily it can be done. Have you tried some of the unusual combinations people have come up with to get into download mode. For example removing the battery, holding power + volume down + home and then reinserting the battery whilst these buttons are held?
Also, if you can't get into download mode that doesn't mean you have to sell it as parts. Samsung will be able to repair it, if they can't tell what you did then perhaps they'll repair it for free under warranty.
Sometimes I just wonder why people try to install low-level software on their device that ISNT MEANT for their device. There is a reason, the captivate has a different model number and that is because it requires DIFFERENT software.
This comes close to me flashing the BIOS for an AMD motherboard on my X58 Intel motherboard.
reason for people installing other software is in my case because im STUPID !!! I stood almost 24 h reading forums in my country and stuff , and i googled ODIN the first link was this ODIN ONE CLIK i entered read about things there and it seamed to be for my phone, and from there we know the story. I did not think for one moment that the soft was for another phone. After i broke it i read all 42 pages and realized that.
I can't get the phone to do anything.... i can't charge it ... it's like the USB does not exist. If i start the phone unpluged, when i plug the usb in turns oFF , ass soon as i take out the USB it will start again to flash the AT&T logo...
I hope if i can't fix it, that SAMSUNG service will change it or can repair it and not charge a hunormus amount of money for that
you have give me hope telling that it can be fixed by samsung , and i still am opened for advices from u guys
Darkstriker said:
Sometimes I just wonder why people try to install low-level software on their device that ISNT MEANT for their device. There is a reason, the captivate has a different model number and that is because it requires DIFFERENT software.
This comes close to me flashing the BIOS for an AMD motherboard on my X58 Intel motherboard.
Click to expand...
Click to collapse
Sent from my PC36100 using XDA App
This reply of yours was rude and not helpful to OP. He's waiting for someone to help him not bash him.
wsantiagow said:
Sent from my PC36100 using XDA App
This reply of yours was rude and not helpful to OP. He's waiting for someone to help him not bash him.
Click to expand...
Click to collapse
thanks, im not going to be upset if people make fun, they can do it because i was so stupid not to see that the soft is for another phone and brake it with my own hand. Isn't on this forum someone that works for Samsung and can tell me for sure what to do , or if the service can do ?
MC Mate said:
thanks, im not going to be upset if people make fun, they can do it because i was so stupid not to see that the soft is for another phone and brake it with my own hand. Isn't on this forum someone that works for Samsung and can tell me for sure what to do , or if the service can do ?
Click to expand...
Click to collapse
if we´d have this guy here, the galaxy s would be worlds top android device out of the box, since this guy would perfectly know what the problems are with it and could easily manage to incorporate fixes found here or based on testing people made here...
FadeFx said:
if we´d have this guy here, the galaxy s would be worlds top android device out of the box, since this guy would perfectly know what the problems are with it and could easily manage to incorporate fixes found here or based on testing people made here...
Click to expand...
Click to collapse
i was not referring to a developer from samsung or an engineer, i was asking for a guy that works in a Samsung service, and could tell me if my problem can be resolved in the service.
MC Mate said:
i was not referring to a developer from samsung or an engineer, i was asking for a guy that works in a Samsung service, and could tell me if my problem can be resolved in the service.
Click to expand...
Click to collapse
Why don't you just call them and ask yourself?
Im sorry but you screwed up. Im sure samsung can fix it but charge you heaps of money. You could always "loose" your phone if you have insurance
Sent from my GT-I9000 using Tapatalk
Does Recovery Work?
If not then try flashing a new recovery via fastboot using adb
Man this suck I hve the same proble and waiting for a Jtag for repair the boot
be pattient.
MC Mate said:
thanks, im not going to be upset if people make fun, they can do it because i was so stupid not to see that the soft is for another phone and brake it with my own hand. Isn't on this forum someone that works for Samsung and can tell me for sure what to do , or if the service can do ?
Click to expand...
Click to collapse
Maybe you should just ease off the pedal.
/hunormus....definitely re-using that at some point
celtichazard said:
Man this suck I hve the same proble and waiting for a Jtag for repair the boot
be pattient.
Click to expand...
Click to collapse
what is Jtag ? i will go on monday at service because in weekend u can't find operators or services open
maybe i will get a nice service guy that will say oh doesn't start (battery empty ) doesn't charge , here is another one
Amz95 said:
Does Recovery Work?
Click to expand...
Click to collapse
nothing works, only AT7T logo
kgk888 said:
Maybe you should just ease off the pedal.
/hunormus....definitely re-using that at some point
Click to expand...
Click to collapse
i did not get your post
ickyboo said:
Im sorry but you screwed up. Im sure samsung can fix it but charge you heaps of money. You could always "loose" your phone if you have insurance
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
you don't have these option very often in this country... i know only one person that has these type of insurance...
Well there is a way of getting your phone working by putting a file on your sd card but you'd have to look for that .
Amz95 said:
Well there is a way of getting your phone working by putting a file on your sd card but you'd have to look for that .
Click to expand...
Click to collapse
can u give a link or more details pls
Darkstriker said:
Sometimes I just wonder why people try to install low-level software on their device that ISNT MEANT for their device. There is a reason, the captivate has a different model number and that is because it requires DIFFERENT software.
This comes close to me flashing the BIOS for an AMD motherboard on my X58 Intel motherboard.
Click to expand...
Click to collapse
Actually, you should try it... I've been told that flashing Intel boards with AMD firmwares allows unlimited overclocking! or not.
wsantiagow said:
Sent from my PC36100 using XDA App
This reply of yours was rude and not helpful to OP. He's waiting for someone to help him not bash him.
Click to expand...
Click to collapse
Rude ? He is right ^^
There is no easy way to tell someone he is a moron^^
Mynx said:
Rude ? He is right ^^
There is no easy way to tell someone he is a moron^^
Click to expand...
Click to collapse
I'm sorry for that. It's a little bit of frustration speaking there. But I guess you have a way bigger problem. Although that post about putting the right file on the SD seems interesting (but I haven't heard of anything like that before).
But if you can, returning the phone and hoping that samsung will fix it will be the easiest fix.
Darkstriker said:
I'm sorry for that. It's a little bit of frustration speaking there. But I guess you have a way bigger problem. Although that post about putting the right file on the SD seems interesting (but I haven't heard of anything like that before).
But if you can, returning the phone and hoping that samsung will fix it will be the easiest fix.
Click to expand...
Click to collapse
im sure samsung can fix it evan by changing the sd in the phone with the correct soft will solve it, but i want to see if there is another way of doing it
Ok lets get straight to the point, I got a brand new captivate from at&t. Ive always used custom roms but never had an android. So of course i wanted to flash a custom rom. So i prepared my phone and followed ALL instructions for flashing a custom ROM. I couldnt run any update.zip files thoe because of the stupid verify thing. So LISTEN, I took the patch that patches 3e recovery back to 2e recovery aka kernal swap.....then everything worked fine and i got cwm to load and installed Apex_7.
AFTER the install was complete i was so excited. I selected reboot now, the AT&T logo came up and then the screen went all jacked up(looked like a broke screen) then went to the samsung logo and just keeps replaying it.
So after seeing this i freaked out and pulled the battery. Then i went and researched before doing anything else i came to the conclusion i needed to download odin pre-packed so i downloaded the odin stock installer.
Now LISTEN I put my phone into download mode ran odin and it said it succesfuly installed after about 3 minutes. So i then turn the phone off then turned it back on, it booted to the at&t logo then the screen goes black and loads at&t logo again (constant loop that heats the phone up)
AND NOW if i try to get into download mode it goes to the battery screen with no animation just a battery and a loading symbol
ALSO( I have made a usb jig ) BUT my ohm meter will not read the resistance of more than 2 resistors when i add the third one it reads it really fast and then shows nothing.
PLEASE HELP ME I LOVE THIS PHONE MORE THAN MY IPHONE OR MY HTC.
Credit will be given. I know someone here can save me from the dreaded face-to-face with at&t!!!!
Edit: Also when i got the phone i noticed a line of dead pixels on the left side very hard to see unless u look closely think i could get the phone replaced by using this as my excuse. idk what to say to AT&T if i do have to return. But i really hope not ive never ever had such problems flashing anyphone.
Please do not double post. You already asked (correctly) in the Apex sticky. No need to start another separate thread.
I posted both places because my problem may or may not be related to Apex. If Apex has nothing todo with my problem then i have correctly posted here.
Edit: Im trying to kill 2 birds with 1 stone
You are not fully bricked if your phone powers on at all. Just need a working jig. You can buy them from multiple sources
Sent from my I897 using XDA Premium App
Miami_Son said:
Please do not double post. You already asked (correctly) in the Apex sticky. No need to start another separate thread.
Click to expand...
Click to collapse
I noticed you are running a captivate. Any idea's on what my problem may be?
Corrupt boot loader, 100% brick. Any tips links or any info would be very helpful.
yaboydrew said:
I noticed you are running a captivate. Any idea's on what my problem may be?
Corrupt boot loader, 100% brick. Any tips links or any info would be very helpful.
Click to expand...
Click to collapse
I don't help people who think they are justified in double posting despite it being clearly against the forum rules.
mcord11758 said:
You are not fully bricked if your phone powers on at all. Just need a working jig. You can buy them from multiple sources
Sent from my I897 using XDA Premium App
Click to expand...
Click to collapse
Finally shed me some light. Thats awsome dude thanks. I made my jig exactly how they make theres it wont work. The only thing i can think is im touching the wrong pins. I touch the top and bottom pins on the micro usb closest to the 3.5mm headphone jack???
It takes allot of trail and error and if the resistance is not right it won't work. purchase one from somewhere, search captivate usb jig on youtube, should find a source
Sent from my I897 using XDA Premium App
Miami_Son said:
I don't help people who think they are justified in double posting despite it being clearly against the forum rules.
Click to expand...
Click to collapse
Now your spamming my thread with non-sense if you dont want to help then go on about your business. I simply told you I DONT KNOW IF ITS RELATED TO APEX OR NOT THATS WHY I POSTED BOTH PLACES. SORRY, you dont have to act immature and exclude me from help. (whats the point of this forum then) Now i know dont post in 2 places because arrogant people will be sure to add frustration to your problem.
Don't mind the bs, just get yourself a jig and hope it works
Sent from my I897 using XDA Premium App
mcord11758 said:
Don't mind the bs, just get yourself a jig and hope it works
Sent from my I897 using XDA Premium App
Click to expand...
Click to collapse
Thanks il try a couple more times with my homemade jig if not il purchase one.
Thanks again.
You'll need to build a new jig or buy one(Moiletechvideos is what I would suggest), because if you can't get into download mode then you cannot be helped any further. And Miami_Son is right, you're not exempt from the rules. I realize it can be frustrating if something goes wrong, but you need to just cast that aside for the time being.
Superalpaca said:
You'll need to build a new jig or buy one(Moiletechvideos is what I would suggest), because if you can't get into download mode then you cannot be helped any further. And Miami_Son is right, you're not exempt from the rules. I realize it can be frustrating if something goes wrong, but you need to just cast that aside for the time being.
Click to expand...
Click to collapse
Ok i had my buddy come over and tried his jig that he bought online it looked like it had been manufactured just to be a jig we plugged it in and nothing ? any ideas
and i posted in the Apex thread to see if anyone could link my problem to apex then i also posted a similar story here to find a solution to my problem the Apex thread is just to narrow down the cause.
First, what is your phones revision ( on the back of phone, like 1008 ,1101 etc. ) i would just start over. Get that
phone in download mode, search for A10 TOOLBOX/captivate toolbox, everything you need is there. Two. Did your 3button combo work before? And your sure you cant get into recovery by your buttons?
rwells813 said:
First, what is your phones revision ( on the back of phone, like 1008 ,1101 etc. ) i would just start over. Get that phone in download mode, search for A10 TOOLBOX/captivate toolbox, everything you need is there. Two. Did your 3button combo work before? And your sure you cant get into recovery by your buttons?
Click to expand...
Click to collapse
I appreciate you taking your time to help. My phone is the SGH-I897 i could still use the 3 button combo before Odin and recovery but after i ran odin thats when everything got really jacked up now i cant get into recovery or download i think im not doing this jig thing right but if im correct i have a striped usb plug. With the screen facing down i have three prongs on the bottom and two on the top i touch the far right prongs top and bottom and hold for about 10 seconds. Thanks dude seriously I just got this phone and loved it but got tired of at&t bloating my phone with bs that eats my memory.
EDIT: the number next to the big CE is 0168 or what u might want is 1105 rev 0.4
EDIT: Also i dont understand what the diff is between rogers 2.6 and captivate 2.5 and how can i use these tools without a booting phone.
yaboydrew said:
Ok i had my buddy come over and tried his jig that he bought online it looked like it had been manufactured just to be a jig we plugged it in and nothing ? any ideas
and i posted in the Apex thread to see if anyone could link my problem to apex then i also posted a similar story here to find a solution to my problem the Apex thread is just to narrow down the cause.
Click to expand...
Click to collapse
Does your buddies JIG work just fine in other phones? If so you may have a short in pin 4 or 5 of your USB port. Are you able to issue the "adb reboot download" command when the phone is bootlooping? I have ADB command videos on youtube just search for them for help on that. Either way if you can't get it resolved with any conventional methods, I can restore the phone using advanced JTAG just PM me for info.
connexion2005 said:
Does your buddies JIG work just fine in other phones? If so you may have a short in pin 4 or 5 of your USB port. Are you able to issue the "adb reboot download" command when the phone is bootlooping? I have ADB command videos on youtube just search for them for help on that. Either way if you can't get it resolved with any conventional methods, I can restore the phone using advanced JTAG just PM me for info.
Click to expand...
Click to collapse
ive searched around on using adb i dont get how it will work do i download the android sdk and run cmd and cd:/ the adb then execute command but i thought in order for the phone to communicate with the adb wouldnt it have to be in debug mode and booted up
yaboydrew said:
I appreciate you taking your time to help. My phone is the SGH-I897 i could still use the 3 button combo before Odin and recovery but after i ran odin thats when everything got really jacked up now i cant get into recovery or download i think im not doing this jig thing right but if im correct i have a striped usb plug. With the screen facing down i have three prongs on the bottom and two on the top i touch the far right prongs top and bottom and hold for about 10 seconds. Thanks dude seriously I just got this phone and loved it but got tired of at&t bloating my phone with bs that eats my memory.
EDIT: the number next to the big CE is 0168 or what u might want is 1105 rev 0.4
EDIT: Also i dont understand what the diff is between rogers 2.6 and captivate 2.5 and how can i use these tools without a booting phone.
Click to expand...
Click to collapse
No problem bro, if i help just hit thanks. If cant figure our making the jig, i would just buy. Its a good investment for the future especially if tour flashing roms. Mobiletechvideos has one for 8 bucks and ships in couple days. They work wonders. The A10 toolbox/ captivate toolbox. Worka great, just search google and. Install it. Its got everything youll need packed inside. EX: it comes with the drivers, odin1click and 3buttonfix odin ( which youll need to do)
It also comes with the pda and tar files youll need, it also lets you root it but i suggest the one click root for captivate, get all that done first and well go from there.
Deleted double post
rwells813 said:
No problem bro, if i help just hit thanks. If cant figure our making the jig, i would just buy. Its a good investment for the future especially if tour flashing roms. Mobiletechvideos has one for 8 bucks and ships in couple days. They work wonders. The A10 toolbox/ captivate toolbox. Worka great, just search google and. Install it. Its got everything youll need packed inside. EX: it comes with the drivers, odin1click and 3buttonfix odin ( which youll need to do)
It also comes with the pda and tar files youll need, it also lets you root it but i suggest the one click root for captivate, get all that done first and well go from there.
Click to expand...
Click to collapse
Thanks man, i just got to get it into download mode. I shoulda just bought a jig in the first place i spent 20 bux on the materials to make a jig. Im inpatient person il trial and error for hours before waiting a couple days for a jig but i dont see why my homemade jig would be any dif from theres it consist of 301k resistance and a micro usb
Today i went and got my tablet replaced for a bad pixel. I
i pulled it out of box went into download mode and did pit,pda,modem
tmobile sgh-t849
flashed with
gt-p1000_mr.pit
GB_Stock_Safe_v3.tar
\T-Mobile Modem\modem.bin
it failed 75% and didn't really say a specific error. Its bricked doesnt turn on or go into download mode.
im not sure what i did wrong. I have performed the same steps with success in past.
Please help me figure out what i did wrong.. First time i have ever bricked and i have flashed a lot of phones.
jphilpot said:
Today i went and got my tablet replaced for a bad pixel. I
i pulled it out of box went into download mode and did pit,pda,modem
...
Click to expand...
Click to collapse
Could you have forgotten to replace the protected bootloaders?
You should have given it a full charge before you tweaked your tab.
Anyway, try to give it a full charge plugged into the wall, then try again.
So you didn't even give it a first boot? Should have at least done that and checked for protected bootloaders...
without more detail... Yeah... As ranger said, you didn't even give it a full charge?
Sent from my "better than an iPad" tab running Overcome Hermes.
Edited for swypos
i mean perhaps it was 90 percent charged
and yes i had it already booted into froyo. I mean the first one wasn't protected so i guess i jumped the gun. But i don't think the boot loader was the issue.
knew i shouldn't have put the screen protector on.. always curses me.. hehe
I did two post to revise my title to get a better answer on how to correct next time.
http://forum.xda-developers.com/showthread.php?t=1133590
Thanks. I will try but it was full battery
Sent from my SGH-T959 using XDA Premium App
can you follow the steps that in the thread i gave you ? is it so hard to listen ppl , WTH wrong with you ? posting 2 thread in the wrong section and the same question ? OMG ... i really need BANHAMMER ...
"help me understand why i bricked my vibrant"
I got slightly confused by that title..
Sent from my GT-P1000 using XDA Premium App
GANJDROID said:
"help me understand why i bricked my vibrant"
I got slightly confused by that title..
Sent from my GT-P1000 using XDA Premium App
Click to expand...
Click to collapse
you'll shock if you know that he post this Q in the general section 2 times ....
i didn't mean to post twice...
you guys are trolls...
I bricked my device and i was quite upset... Why i reposted smart guy was to redo the title so that someone would verify my steps were correct.
You havent shown me anything yet that answers my questions. Sending me to a Q & A post didn't help anything. I read that **** before i even even bought the phone. I don't need you to tell me the differences between bricks..
the **** charged all night last night and i let it run all the way down before hoping it would discharge. I had just flashed my other one that had a bad pixel the night before and i had no issues. I did the same steps as before.
i find it funny you guys are more worried about where i posted then the actual issue.
If you want to talk about a waste.. you have wasted space with your nonsense all day replying to this thread with no useful information.
This is my 6 android device and first one i even bricked so spare me. I followed the steps exactly just like i did the day before with no issues. Your so cool sending me to the Q & A because i posted twice.
All I said is that I got confused by your title. That's it. I didn't come here to troll or say that you shouldn't post here or there or anything like that.
Sent from my GT-P1000 using XDA Premium App
Moved to Q&A, OP, you can edit the title of a thread by editing your original post, then clicking "go advanced"
Lets keep it civil and help this guy get his tab fixed eh folks......
to the OP .. can you tell me what tab you have , your firmware ? ? old stock rom you have ? lets go serious now
I went to tmobile and got my old one back.
I returned the bricked one and got back the one with 1 dead pixel. I already had it good to go with 2.3.3 so im going to leave it alone for now.
It would be nice if i could still understand why it happend.
it came with froyo
tmobile sgh-t849 2.2
i flashed the GB_Stock_Safe_v3.tar which is 2.3.3. It just said failed with no other information. At this point i would be weary of using odin on my desktop.
iv used odin alot in the past and never really had any issues
is your tab can call ? sorry for my dumb question .. your tab is GSM P1000 ?
@OP can you be more fast to reply . its 4:33am here .. so be fast !!!!!!!!!!!!!!!!!!!!
The OP has already told us TWICE that his device is a Tmobile SGH-T849 meaning that it is NOT an SGT-P1000
yeah Mokhattab , i know , thats why i wanna just show him what he did ...
though his tab can't get the Gingerbread right , either the Stock safe from yours ...
@OP thats why you bricked your tabb
k0sh said:
yeah Mokhattab , i know , thats why i wanna just show him what he did ...
though his tab can't get the Gingerbread right , either the Stock safe from yours ...
@OP thats why you bricked your tabb
Click to expand...
Click to collapse
I beg to differ
@OP
There is no reason why you can't flash Overcome
Having a TMO SGH-T849 is certainly no brickable offence in terms of using Overcome
While the problem may no longer exist, it's definitely worth investigating to know why you had problems (also to get you over your newly acquired fear of Odin )
Is there the slightest possibility the cable was nudged or such?
You seem to be comfortable using ODIN and your setup must be OK if you've flashed your current Tab before so I'm thinking it might have been a freak accident of some sort
I trying loading using Odin but it got stuck at "Setting up connection"
I then restarted PC and did it again and this time it went 2 more steps and then the screen became completely GREEN
Then I did the whole exercise again and now the screen became PINK
Now I am not even able to get into DOWNLOAD MODE...and neither do I see [mobile]![PC] icons.
Nothing happens. Is my phone now really bricked?
Please help! I am now worried about this
If the phone shows signs of life then its not bricked.
Also please don't create multiple threads on the same problem. It just clutters the forums even more.
I think I do not see any signs. It does not show anything on the screen even after trying download mode or recover mode. Powering on the phone also does nothing. I even kept the phone on charging the whole night but during the charging I did not see the usual green battery animation.
Is there anything left? Looks like I literally destroyed my working phone running 2.2. just by trying to upgrade it to 2.3 through Kies and then later using Odin.
I am very disappointed that how poor Samsung support is that a mere upgrade attempt destroys the phone. I had bought this phone 18 months ago by paying 540 $ and I now see it go down the drain
You can attempt contacting samsung if it was messed up with Kies but doubt they would do anything. But Kies is crap anyways. You can how ever attempt (or pay someone) to apply Unbrickable Mod (Adam Outler or MobileTechVideos.com)
there is one last thing you can try.
start odin on pc
take battery out of phone
put battery in
hold both volume buttons
plug USB cord in from pc to phone
if odin box turns yellow press start to flash a firmware!
it very rarely happens that you can do this but if you can, congratulations.
What odin u using ?
prbassplayer said:
You can attempt contacting samsung if it was messed up with Kies but doubt they would do anything. But Kies is crap anyways. You can how ever attempt (or pay someone) to apply Unbrickable Mod (Adam Outler or MobileTechVideos.com)
Click to expand...
Click to collapse
Thanks for the reply.
Will the "jig" hack work? My phone is totally unresponsive. No matter what I press nothing displays on the phone.
devangxda said:
Thanks for the reply.
Will the "jig" hack work? My phone is totally unresponsive. No matter what I press nothing displays on the phone.
Click to expand...
Click to collapse
Doubtful but no harm in trying
Sent from my ICS powered Captivate using Tapatalk
rkkaranrk said:
What odin u using ?
Click to expand...
Click to collapse
I897UCKK4 Odin One Click - Stock, CONTAINS Bootloaders, Re-partition, Full Wipe mentioned by XDA member 4-2ndtwin.
Am i left with just JTAG as the only hope?
devangxda said:
I897UCKK4 Odin One Click - Stock, CONTAINS Bootloaders, Re-partition, Full Wipe mentioned by XDA member 4-2ndtwin.
Am i left with just JTAG as the only hope?
Click to expand...
Click to collapse
UBM is better.
prbassplayer said:
UBM is better.
Click to expand...
Click to collapse
UMB..watching the videos looks like i will need some hardware hacker to fix it. Do you suggest a hardware novice should try it or leave it to the professional?
devangxda said:
UMB..watching the videos looks like i will need some hardware hacker to fix it. Do you suggest a hardware novice should try it or leave it to the professional?
Click to expand...
Click to collapse
You need decent soldering skills, else pay a professional.
Sent from my ICS powered Captivate using Tapatalk
I contacted Adam and he has agreed to offer his expert services. Now the problem is that I am in India and I can ship it to US but it will cost me dearly when he ships back because of the Indian custom rules. They will tread my repaired phone as a new one and add 15% duty costing me more than original phone cost.
So I am thinking of sending it through my friend who is visiting US later this month. However, I was looking around and found this link.
http://forum.xda-developers.com/showthread.php?t=1000175
Do you think this is something I should try? I already have good Arduino UNO toolkit.
devangxda said:
I contacted Adam and he has agreed to offer his expert services. Now the problem is that I am in India and I can ship it to US but it will cost me dearly when he ships back because of the Indian custom rules. They will tread my repaired phone as a new one and add 15% duty costing me more than original phone cost.
So I am thinking of sending it through my friend who is visiting US later this month. However, I was looking around and found this link.
http://forum.xda-developers.com/showthread.php?t=1000175
Do you think this is something I should try? I already have good Arduino UNO toolkit.
Click to expand...
Click to collapse
What you should know is Jtaging requires you to solder 6 very small spots vs UBM is 2 spots (I believe) and UBM will make your phone umbrickable. You could find a tech near you live that's good with a solder gun? Adam has a thread explaining the method.
Sent from my ICS powered Captivate using Tapatalk
Have you tried to force the phone into downloading mode using adb?
Using Doc's Master ROM v7: Cappy edition
KangKilla said:
Have you tried to force the phone into downloading mode using adb?
Using Doc's Master ROM v7: Cappy edition
Click to expand...
Click to collapse
No. I have not.
(a) How can it be done. I already have the Android SDK installed on my PC.
(b) My phone is totally non-responsive...it is totally blank black screen. Will adb work?
Adb requires phone on or in recovery
Sent from my ICS powered Captivate
Hi Guys
I got this i9305 with with me, and it got few strange issues
its a brand new phone and its ringer/camera/touch buttons wont work and it wont wake up once LCD goes to sleep (only removing and reinserting battery works)
phone is from Orange France and i have tried flashing it with several firmware, and nothing has solved the problem, i opened the phone and there no is water/moisture or anything
wondering what could be wrong, any ideas/suggestions would be appreciated
WBR
Syed said:
.... i opened the phone and there is water/moisture or anything....
Click to expand...
Click to collapse
Hi,
your answer is here!. Seems to be a hardware short circuit.
maybe putting your open device close to a warm source to dry it will give you 15.031969% to save it...
Else, I fear you need Samsung service..
I don't mean to be rude but why did you open a thread here on XDA about this?
This site is for mobile phone/tablet development.
You have bought a faulty device, it happens.
You need to take it back for a replacement, simple.
I hope you get it sorted! It's never nice buying something and it not working properly.
kanzi83 said:
Hi,
your answer is here!. Seems to be a hardware short circuit.
maybe putting your open device close to a warm source to dry it will give you 15.031969% to save it...
Else, I fear you need Samsung service..
Click to expand...
Click to collapse
that was one skipped word, i meant to write "there is no water damage"
Obagleyfreer said:
I don't mean to be rude but why did you open a thread here on XDA about this?
This site is for mobile phone/tablet development.
You have bought a faulty device, it happens.
You need to take it back for a replacement, simple.
I hope you get it sorted! It's never nice buying something and it not working properly.
Click to expand...
Click to collapse
i believe it got something to do with calibration or something related to software
as phone was flashed earlier and it might be something to do with flashing
i was thinking of writing NV calibration data from another phone to see if that may help, but thought of getting more ideas first.
WBR
Oh right, fair enough then. I thought it was brand new and you'd just taken it out of the box.
Sent from my GT-I9305 using XDA Premium HD app
Obagleyfreer said:
Oh right, fair enough then. I thought it was brand new and you'd just taken it out of the box.
Sent from my GT-I9305 using XDA Premium HD app
Click to expand...
Click to collapse
as good as new, only a few days used, sending it back would be costly
so i thought to get some ideas if it could be calibration data or something, as i have already flashed it but it didn't yield any result..