Database Develop

The Mobile Can Only Enter Serial Mode

I upgraded TMobile MDA, but there's a problem. The mobile can't boot since then! But it can enter serial mode(boot loader), and I can only see these words from from LCD:
Serial
V2.07
I found many upgrade software and many ROMs for blue angel, using MaUpgradeUt_noID.exe or MaUpgradeUt.exe. But it seems that the programs can't find the mobile!
How can I do now? Is there a hardware problem? Maybe I don't find the suitable program, maybe I should find a new program because there's no OS but only a bootloader in it. If someone knows how to deal with this mobile, please tell me. Thank you very much!

Didn't work. Still hanging in boot loader mode.
I have the same problem with my HTC Blue Angel (PH20b)... Locked in Boot Loader mode following a failed ROM upgrade attempt. I tried adding the line to the ruu.conf file as suggested, but I still get the same error just after starting an upgrade attempt...
"Error 120: Country ID Error no-no-no-12-12-12"
Same as it has been for the past month or so. Anyone have any other ideas? I've tried to install just about every rom available... All with the same result every time.
Thanks,
-Mark

flypen said:
I upgraded TMobile MDA, but there's a problem. The mobile can't boot since then! But it can enter serial mode(boot loader), and I can only see these words from from LCD:
Serial
V2.07
I found many upgrade software and many ROMs for blue angel, using MaUpgradeUt_noID.exe or MaUpgradeUt.exe. But it seems that the programs can't find the mobile!
How can I do now? Is there a hardware problem? Maybe I don't find the suitable program, maybe I should find a new program because there's no OS but only a bootloader in it. If someone knows how to deal with this mobile, please tell me. Thank you very much!
Click to expand...
Click to collapse
Sounds like a PC Driver problem. When using a USB cable, the bootloader screen will switch to say USB and the PC will display that a USB device was attached. Is this occurring? if not, try another USB port.

Quick Q
MDA is Blueangel and not wizard?

rschell said:
Sounds like a PC Driver problem. When using a USB cable, the bootloader screen will switch to say USB and the PC will display that a USB device was attached. Is this occurring? if not, try another USB port.
Click to expand...
Click to collapse
Should I install a special driver in PC?

just helping
flypen said:
Should I install a special driver in PC?
Click to expand...
Click to collapse
nope, when entering in the bootloader mode, it usually indicates "serial" but when you would attach the usb cable it would change to "USB" mode without installing anything just the cable itself.

Oh, 3x! When I plug in USB cable, the text on LCD is still Serial. Maybe there's some problem with the cable.

flypen said:
Oh, 3x! When I plug in USB cable, the text on LCD is still Serial. Maybe there's some problem with the cable.
Click to expand...
Click to collapse
The bootloader screen will not change until the USB cable is plugged into the PC and the Phone. You should get a Microsoft USB device showup on the PC under Windows CE USB Sync in device manager (Win XP).

Can anyone tell me what was the solution to get the IIs into a USB mode?
Im having a same problem. Its keep saying serial and even after i plug it into the USB port it does not change to USB.
Any ideas?
thanks

This problem is solved
I changed a USB cable, then I can found "USB" showing in the screen! Everything is OK now.
The only problem is that the first USB cable doesn't work. A good new USB cable can solve this problem!
Thank you very much, rschell.

Problem in BL -My BA is gone ?-

Hello everyone,
I'm sorry if my English isn't well
I have a SPV M2000.
I wanted to upgrade it to wm6.1, but when I was entering in Boot Loader Mode, a problem has happened.
So I wanted to do either a soft reset or hard reset, anyway the screen stands in mode BootLoader, I tried also to put off & put on the battery..
-Above the screen, it shows "Serial"
-in the screen below "v 2.08"
How can I solve that problem
Regards

What operating system are you using on your PC?
also try to re-flash

Yes, I tried to re-flash : no changes.
I'm using WM2003 SE.

what OS on your computer
XP or Vista

The OS on my PC is XP

use mtty method for restoring your device, use search to find out how

Bad rom that is not connect and sync anymore

I`ve install a wm6.5 version that whas for microsoft internal use only. The phone boots up, enter in OS, but this is not respond. and now I can connect my diamond to pc to install another rom. What to do? thx

Have you tried to put your phone into Bootloader mode and flashing from the PC again?

I don`t know how. please tell me how. I`ve search the google for bootloader mode, be i didn`t find. i have a 32bit vista. thx

I`ve solve the problem. i didn`t know the thing whit bootloader mode. Thank you very much!

SOLVED! Bootloaders as far as it goes...Will not load any flash with SSPL or HSPL.

About a year-ish ago windows stopped working on my spv3600 m700 Trinity. I looked into reflashing the phone & put a copy of schaps 4.30 striaght onto the fone no problems.
I now want to upgrade the rom again & can get it into the bootloader screen ok. My problem is that this is as far as I can get. I've even tried the minisd trick but I see loading box very briefly flash up on the screen & thats it...still in bootloader mode with serial but nothing else happens.
The fone is not bricked & if I reset it will load windows. I've tried the original flash & bootloader. Soft (SSPL) & hard Bootloader technique but to no avail.
Has anyone got any other solutions? Many thanks in advance, its sending me crazy!!

Ok I sorted the first problem of using SDcard to flash .MBH files. It was down to the miniSD card format not being FAT32. I reformat the card as FAT32 & then bootloader progressed to installation stage.
...now I have a new problem... i'm stuck in bootloader mode SPL 1.07.0000 IPL 0.50 after I used SSPL from my mobile in windows mode to get the 1.07ds override bootloader. This allowed me to flash the Radio to the latest chinese version. I then used this program again to Flash to windows 6.5 & then half way through it rebooted to the bootloader tricolour screen.
The problem is that now that windows is gone I can only run the standard bootloader SPL 1.07.0000 with the phone. If I try & upgrade a cooked ROM it comes up with an error code on the mobile. If I try an official version it checks the ROM & then says "not allowed".
Is there a way I can change the bootloader through the card SD? I can't either get the bootloader to change from serial msg to usb...doesnt matter how many times I plug in the USB & i'm using XP. Is there a way to force it into USB?
I've tried putting "Des crash proof SPL" ,"Hard SPL", "Hard SPL 1.20" onto SDmini card as TRINIMG.NBH bootloader loads then comes up with 00068002 error i presume on screen
I've tried putting official upgrades "RUU Trinity DOPODA SIA WWE...Ship.EXE rom" & "RUU Trinity HTC WWE .........GPS.exe rom" onto SDmini card as TRINIMG.NBH, bootloader loads, . . .checking, then displays "not allow" & "00028002" on screen! Now i'm really stuck!
Any help would be greatly appreciated!

looks pretty much the same like my trinity right now...
help would be very appreciated

Solved.
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.

steve54321 said:
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.
Click to expand...
Click to collapse
Still on bootloader with error 0068002
can't ran anything.
Please help......
SOLVED:::::::: sorry

Trinity bricked , pls help ...
steve54321 said:
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.
Click to expand...
Click to collapse
Hi , there ,
I am finding myself into the same situation but I do not realy get you : how You managed to get out of the bootloader mode where it says :
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
Can you , pls, be more specific , cause I am a newbe who bricked his Trinity a week ago :::

Blocked with error 0068002
Hello, after I install nAr.23016.FRA.IE8-CHOME on my sfr s300+, I'm blocked on the first page HTC, etc...When I put the S300+ under bootloader (photo and power button action), I plug the USB and I itry to flash;result is a reboot. I try with TRINIMG.NBH and result is error 0068002.
I need help to resolve this problem.Can u help me? Regards.
dan (excuse my bad english)

Big Problem - Is my Kaiser dead??

Happy new year everyone!
I have a big problem with my kaiser, maybe is 2011 a bad year for me ..
Well, I flashed for the third time the modded kernel of DnbTommy (including a RADIO, SPL, etc..).
Just after the flash, my Kaiser won't boot!
Just a black screen, and green LED. (can't hard reset, flash, or anything ..)
I made searchs on XDA and more, and I heard about MTTY solution..
But when I plug in my Kaiser in the USB cradle, it recognizes an unknown "Data Interface".
And MTTY does not recognize the USB port.. I tried on a Windows 7 (x64) computer, and a Windows XP (x32) laptop, with the same results.
Thanks for your help!

Try removing the battery for roughly 30 seconds then re-install

I already did it, even changing battery, but no results

Go in flash mode (camera button and reset) and flash another nbh.

Hi L1q1d,
Unfortunately, I can't go in flash mode, bootloader mode, or anything..
My screen stays black, and I can't flash!

Is the battery charged?

Of course it is !

I really need help please, elsewhere, my Kaiser will be lost..
Thanks in advance!

Have a search for the Diagnostic drivers you might be able to connect with mtty with them?

If you mean the drivers folder named
"x64 AS Drivers Win 7 Tested & Working" ,
including 2 files : wceusbsh.sys and wceusbshx64.inf
then, it does not..

No i mean the motoQ diag drivers these work with win 7 not sure about x64 ?

meknb said:
No i mean the motoQ diag drivers these work with win 7 not sure about x64 ?
Click to expand...
Click to collapse
Okay I will try it, then! Thanks!
Do I have to install them when it asks for "Data Interface" driver?

Yes just unzip them first.

Well, I tried on a Windows XP 32 Bits laptop.
I plugged in my Kaiser with USB cable, installed MotoQ Drivers when it asked for "Data Interface" drivers,
But when I run mtty.exe, it shows me 3 more "COM" ports.. But no USB!
If I plug out my Kaiser, 3 ports less appears, then..
What could I do now?
Thanks!

I haven't a kaiser but id suggest looking through the frankenkaiser threads, you can connect mtty via a com port check device manager to see what port to connect with.In device manager look through the serial ports.
Try setboot 0 then cego via mtty.

meknb said:
I haven't a kaiser but id suggest looking through the frankenkaiser threads, you can connect mtty via a com port check device manager to see what port to connect with.In device manager look through the serial ports.
Click to expand...
Click to collapse
When I connect the Kaiser, 3 ports appears in device manager / in MTTY :
- COM3 (cant find its name in device manager)
- COM4 : "Qualcomm Diagnostics Interface 6000"
- COM5 : "Qualcomm NMEA Device"
If I connect to COM3 or COM5, MTTY seems to be blocked..
But if I select COM4, MTTY doesn't crash, but i'm unable to type a command, because it says "Invalid command" to everything I write..
Really, thanks for ur help!!

Yes com4 is the one you need to connect mtty with but id read through the frankenkaiser and related threads,you may find more help there. Good luck

I found here the thread named "Frankenkaiser SPL Loader" :
http://forum.xda-developers.com/showthread.php?t=394584
I tried the step 4, but nothing happends.
I cannot connect to MTTY with the Kaiser, that's the real problem..
Maybe there's another way than MTTY?
Over two years of flashing, it's the first problem that I get with the Kaiser..
Thanks! I really hope to find a solution to make my kaiser alive..

One thing to check is disable Allow usb connections in windows mobile device centre.
Another thing is try different versions of mtty i use mtty_0513_Test or you can try putty does the same thing as mtty.
I'm sure you'll get your kaiser back to life again.

I had stopped rapimgr.exe, but after you told me, I unchecked the "usb connection" box in ActiveSync..
Tried with MTTY 1.42, 0.01, 0513_Test, but nothing happends..
Same with PuTTY...
I think it's a communication problem!?
I would donate you, if you find the solution..