Database Develop

[Q] SpeedMod update issue

Dear all,
I start using SpeedMod since version K12K.
There is no problem when I update the kernel from K12K to K12L, K12M, K12P, until from K12P to K12Q and so on.
After flashing with Odin and reboot, the phone becomes very slow, both in operation and the touch screen response.
I have tried updating from K12P to K12Q, K12R and K12S, they have the same symptom and slow. When I flash back to K12L or K12P, it becomes normal.
Any advises please?
Thanks in advance.
My phone info:
ROM: Stock 2.2 FROYO.ZSJPE

Maybe you should wipe the dalvik cache and cache. Go to recovery mode - clockworkmod options - wipe dalvik cache. do the same with cache partition.
Then reboot. That first reboot will take longer than usual because the dalvik cache has to be rebuild again. After that everything should be fine.

Thanks for your reply.
I have tried wiping the cache, then the dalvik cache, but it seems remain the same --- slow and lag. I would like to know if there is any sequence, let's say wipe the cache first, then wipe the dalvik cache, then flash the phone? or something else?
After wiping the cache, in general speaking, how long do I have to wait after the reboot?
Thanks in advance.
Sent from my GT-I9000 using XDA App

What i mean is that the first reboot after wiping the dalvik cache takes longer than usual because the dalvik cache has to be rebuild again.
You might check in the task manager if there's any running process cunsuming cpu time, which could lead to laginess. There are many things that could produce lags (widgets,apps etc.) I dont know what's installed on your phone.
Sent from my hand

I see. However, I am thinking if the lag is because of the apps. Since I am using the same apps before and after the kernel update. I did wipe the dalvik cache after flash, but after reboot, the phone response very slow, and whenever I click the home button, it just did not show up.
Any more ideas? Thanks a lot.
Sent from my GT-I9000 using XDA App

What i would do in your case would be:
Backup all important data/apps etc.
Then do a complete wipe and reset to factory defaults.
Then flash the latest firmware: froyo 2.2.1
Then flash speedmod kernel and apply all recommended tweaks.
After that restore app by app and rethink the real use of each app (do you really need/use it?).
Might sound complicated but it might be even easier than loosing more time on hopeless attempts to solve the problem...
Sent from my hand

Cheers man, this will be my last step. Thank you for your help.
Sent from my GT-I9000 using XDA App

NP Tell us if you succeeded. You might want to try wiping thumbnail database before (forgot to mention that beforehands).
Sent from my hand

Just done a factory reset (erase data + data cache + dalvik cache)
and flash the new version of kernel. The phone is back to normal now.
Sent from my GT-I9000 using XDA App

Most effective update?

I am about to update RemICS 1.2 to RemICS 1.3. This is actually my first update within the same rom to a newer version. Lately, I have been switching around between multiple rom's but the RemICS is definitely my favorite atm.
Ok, I know I'll have to back up (Titanium)
But then:
- Full wipe and new install
or
- Just flash 1.3 over 1.2 without wiping anything?
Rom is running fine at the moment, no issues at all.

Ok, should have searched a bit harder before posting....
http://androidforums.com/galaxy-s2-...l-wipe-whats-big-deal-steps-take-15-mins.html

A full wipe is always the best option, to get a bug free and super fast rom

Just flash over, its very unlikely you'll get a bug but to be sure wipe cache and dalvik, if you get any bugs just wipe and reflash
Sent from my GT-I9000 running remICS-UX using XDA premium

Flash kernel cleaning script from lippo
Wipe cache
Wipe dalvik
Flash the rom
Reboot and enjoy....
-----------------
I9000 powered by RemICS-UX

Help..stuck on bootscreen after flash!

Advice please...stuck at bootscreen! (followed instructions in crash thread s follows
1. Was on rocket rom v10 with notecore.
2. Flashed abyss
3. 3 wipes + JBroid cleaner
4. Flashed crash 8.2
5. Rebooted
6. Stuck on 'galaxy note' boot screen, tried rebooting. Still stuck. (waited over 10 minutes)
Advice please!!

Did you try booting to recovery and flashing again? Or try clearing cache and delvik cache.

barretp said:
Did you try booting to recovery and flashing again? Or try clearing cache and delvik cache.
Click to expand...
Click to collapse
Yes, tried booting into recovery and wiping again, didn't work. Tried reflashing, still stuck. Tried flashing a different kernel, still stuck.
What's going on?!
Edit: I'm suspecting JBroid might be the issue here..have flashed in the past with no problem but this time decided to use JBroid (as advised in crash thread)..

When you say wiping, do you mean factory reset or wiping cache? If those didn't work flash a stable CM9 kernel, reboot in recovery, and then try to flash again.

barretp said:
When you say wiping, do you mean factory reset or wiping cache? If those didn't work flash a stable CM9 kernel, reboot in recovery, and then try to flash again.
Click to expand...
Click to collapse
Tried both. First just wiping cache/dalvik, then just doing factory reset (after installing notecore because of mmc_erase bug). Neither worked! The only kernels I have on my sd are notecore, abyss. Running out of options..may just try flasing rocket rom again..

octavian90 said:
Tried both. First just wiping cache/dalvik, then just doing factory reset (after installing notecore because of mmc_erase bug). Neither worked! The only kernels I have on my sd are notecore, abyss. Running out of options..may just try flasing rocket rom again..
Click to expand...
Click to collapse
Try flashing a pre rooted stock GB firmware and see if you get the phone to work. Then, try flashing from there.

glevitan said:
Try flashing a pre rooted stock GB firmware and see if you get the phone to work. Then, try flashing from there.
Click to expand...
Click to collapse
Flashed back to RR v10 without any problems. Not sure why Crash wouldn't install but that was quite a scare!

octavian90 said:
Flashed back to RR v10 without any problems. Not sure why Crash wouldn't install but that was quite a scare!
Click to expand...
Click to collapse
glad you have your phone back. Maybe a bad download?
Sent from my GT-N7000 using xda app-developers app

Really digging the positive advice from everyone, thanks! It was a bad download. Downloaded again and flashed just fine =D.
Sent from my GT-N7000 using Tapatalk 2

(Q) cleaning wiping phone - best effective method

hey guys,
which is the best method to clean your phone before flashing a new rom, or maybe bringing your phone to the state it was just after flashing a new rom. i tried data factory reset, wipe cache , wipe dalvik with kernels we have here and i found remainents of zip files i had flashed after setting up my rom and using newer mods. i dont want to format system, preload all the time.
which is your perfect, effective method ? speedmod kernel and its recovery or phillz , then which version ?
thanks

rraaka said:
hey guys,
which is the best method to clean your phone before flashing a new rom, or maybe bringing your phone to the state it was just after flashing a new rom. i tried data factory reset, wipe cache , wipe dalvik with kernels we have here and i found remainents of zip files i had flashed after setting up my rom and using newer mods. i dont want to format system, preload all the time.
which is your perfect, effective method ? speedmod kernel and its recovery or phillz , then which version ?
thanks
Click to expand...
Click to collapse
why you dont want format system and preload before flashing rom?
what I do before flashing any rom is:
flash philz kernel
wipe data / cache / dalvkk cache
format / cache / system / data / preload
and then flash new rom
and thats it, with this procedure I have never faced any issue with any rom I have flashed.
usualy I use this method even befoe restoring my nandroid backup.
above methods I using with philz and speedmod, but i prefer philz when wiping and flashing and making backup, because it has nice cwm for doing that. but after I flash new rom I immediatly flash speedmod because it is the better than philz if you drive your new rom, and you are not in cwm at the moment
hope this helped
Sent from my GT-N7000 using xda app-developers app

completely agree with you djoni, but when you are flashing continuously, experimenting a lot ...you know ...this and that,
isnt a data factory reset , wipe cache, wipe dalvik supposed to bring you to that condition just after booting up after a new rom flash ? why were there remanents from a mod i had flashed after using the rom for some time ?

[q] no home screen panning

Hi guys, who can help me
i ve updated RocketRom JB XXLSZ from Eybee for 4 days ago. however i have a problem, i cant pan (scroll) my homescreen, so how could i do? please:crying:

Using the same ROM I have no such problem. Have you well made full wipe before flash ROM ? Try to reboot into recovery the wipe cache, wipe davilk cache, reboot system. Perhaps the problem disappears.

qnt said:
Using the same ROM I have no such problem. Have you well made full wipe before flash ROM ? Try to reboot into recovery the wipe cache, wipe davilk cache, reboot system. Perhaps the problem disappears.
Click to expand...
Click to collapse
thanks so much but i made full wipe before flash ROM carefuly n i also made full wipe one more time, it still has such problem:crying:

Have you installed any mod after ROM flash ? I've only installed the original ROM and my applis but no mod. That question because few others have wake up problem after screen off, perhaps they have mods.