Related
I have posted This thread to assist anyone like me, who is not a programming whiz. Got to Install this mainly through trial and error and I am not an expert in this. So If anyone can make my steps easier please do!
This is a Variation Installation For a thread a while back in October 2005 Author Ncruz and effjay. Ncruz Posted a wm5 cab. This cab does not install directly due to permissions. However I have extracted the files using windows cab manager.
First are the files are required in windows. If it asks about permissions copy to PDA root folder then copy with Resco File Explorer and overwrite. Next are the registry files. You can import them with a registry program such as tre or regedit.
If you want Microsoft Voice commands to be the default program overwrite SSDialer.exe in windows folder with Voicecmd.exe from Program files/Voice command/ otherwise Cyberon Voice is initiated when you press headset.
I will post the cab in its entirity although it will not install, incase someone knows an easier method to get voice commands working Please contibute to this thread. However this method worked for me. Below in the zip are the files Extracted with Win Cab manager in zip format so you can copy zip to your pda then extract them to the correct folders, along with the registry files you need to import to registry.
N.B..sound of Voice commands is through PDA and not headset. Pressing headset connect button opens Cyberon or active voice command depending on what you have
Can not seem to be able to import the reg files....
OKay, got the files to import and the files copied - no go for me. Darn-it.
Installation
did you do a soft reset with the software built with the rom and repair the bluetooth headset
I might have reset without using the software reset....
However, got it working with this cab file that I found on my storage card. I even got MS Voice Command to work when I hit my BT Headset button.
Heck, it did not even change the record button to SSDialer! I would have thought it would but it did not. So, I am happy!
glad its working for you
now how can i do?
download odie3 's cab file and install? that's right?
Then, when device auto turn off, bt still go off as before?
I can't download files..... Where can I get them?
Re: now how can i do?
kriengkrai said:
download odie3 's cab file and install? that's right?
Then, when device auto turn off, bt still go off as before?
Click to expand...
Click to collapse
The only way I know how to keep BT on is by plugging in my Device to a power source and doing a soft-reset. As long as I do not turn it off with the power button or have it set to auto-power off while plug in, BT will stay on. I do this everytime I get into my car - since it takes me a hour [sometimes more] to get home, so my BT Headset always works.
Hopefully I explained that correctly for you to understand....
Odie
Your query confirmed. The Wlan manager icon from the today screen goes as a side effect of installing the cab. Wifi still works but the Icon in today is not there. Not a big deal for me, as I have skinned my Pda with Wisbar, which has a wifi icon.
Re: Odie
MOHDWADEA said:
Your query confirmed. The Wlan manager icon from the today screen goes as a side effect of installing the cab. Wifi still works but the Icon in today is not there. Not a big deal for me, as I have skinned my Pda with Wisbar, which has a wifi icon.
Click to expand...
Click to collapse
Yes it happened to me as well, but i prefer BT Voice Command Activation than WLAN icon
Thanks for the info
BT activation doesn't work for me...
For some reason the activation through BT headset doesn not work for me.
I'm using WM5 TuMa 1.3 ROM.
The BA_WM5_Voice_Dialer_2.cab doesn't install on my device (permission violation), so I copied the files manually to the Windows folder.
The reg files also don't import to my registry when double-clicking, so I made the changes manually.
It still doesn't work.
Now, when I hit the button of my BT headset (Moto HS-810), the standard dialer is activated (instead of the voice command app) and I hear hissing sounds in the headset.
I tried it both with Cyberon and MS apps. Both don't work.
Did anyone encounter this problem? Anyone solved it?
Thanks.
anyone knpow how to do this with voice command on 2003se?
Just upgraded to TuMa 1.3 and have found a MUCH more simple way of doing it.
1) Install Microsoft Voice Command
2) Download Total Commander (http://www.ghisler.com/ce.htm)
3) Using Total Commander change the read only tickbox for \windows\sddialer.exe so that there is no tick (1 press just greys it out, i needed to press twice) <- browse to \windows in TC and right cick (hold down) on sddialer.exe, and click properties.
4) (you don't need TC for this) Copy %install dir%\voicecmd.exe (where %install dir% is the directory you installed voice command to) to a temporary location and rename it to sddialer.exe.
5) (using TC) 'Right click' on your new sddialer.exe (previoult voicecmd.exe) and select 'cut to clipboard' then navigate to \windows\ and 'right click' and select 'paste from clipboard', when propted overwrite the origional file.
6) press the button on your headset and test it!
the only thing we need now is for some clever person to work out how to route the voicecmd audio through to the headset instead of the load speaker (to my knowledge it uses the microphone on the headset allready (at least it works when i speak quietly from the next room )
it works like a charm
cheers
Do what Midlet says?
If I do what Midlet says- will I still need the 2 files that mohdwadea has posted? Is Midlet's process a complete stand-alone process... or is if preceded by more steps?
Re: Do what Midlet says?
sgrbhtngr said:
If I do what Midlet says- will I still need the 2 files that mohdwadea has posted? Is Midlet's process a complete stand-alone process... or is if preceded by more steps?
Click to expand...
Click to collapse
Have not investigated midlets way of installing as Mine is working. However i suggest that if you check your registry and see if the reg keys i posted within the zip are there. If his way works fine, if it does not i suggest you import the keys into registry and see if that helps. I also strongly suggest you make a note of the keys and where they are imported too, as if it does not work you can remove them.
It worked
Mohdwadea,
Your method worked! This time I performed a soft-reset after the installation and also re-connected the headset. I did not have to go he registry-entry route because the cab-file installed on my device.
This will help me a lot on the road in business. God bless you.
Just glad its working for you!
voice not sending
MOHDWADEA,
I am using this fix a lot on the road. It works very well... expect for in one situation! I can initiate voice dialing by the record button on my device and it accepts voice dialing commands through the bluetooth headset and teh call goes fine.
However, if I initiate the voice dialing using the button on my blueooth headset (Cardo Scala 500), it initiates the voice dial app just fine, accepts commands and conencts the call.... but the other party cannot get my outgoing voice through my bluetooth headset, rather it gets the voice from the mic on my phone. Also, the incoming sound can be heard in my bletooth headset but ALSO on the phone.
Any suggestions?
Thanks!
Sagar
I-mate PDA 2K
WM5 TuMav1.3
I'm using Voice Command 1.6 and it says it quit due to low memory. It didn't used to do it but now it does it all the time. How much memory does it need? Is it because I have too many songs?
Voice Command 1.6 "DON"T WORK"
I purchased Voice Command 1.6 and installed it in my AT&T 8925 "Tilt" (HTC Kaiser). I get pop-up message "Voice Command is quitting because of low memory, please close running program" There are no other programs running. I'm confuded. The microphone icon doesn't appear on my Today screen. There is a lot of posting of users are having the same problem. I heard MS is aware of the problem and is keeping very quite about it. They don't want to recall all the Voice Command 1.6 for replacement. I used SKtools to increase RAM; same problem. I check start-up; 1. btdwake 2. poutlook 3. sddaemom 4. voice command. There are only 4 files. I am returning the software back to MS for a refund. We shouldn't have to accept this.
Do anyone out there have a solution? Geeks?
Thanks,
Steve
Whilhelm & Steveng2000:
I was able to clear up the problem utilizing SkTools:
Menu > View
place checkmark on: Maintenance, then scroll down & select Processes
Menu > Action > Attempt to free up RAM space
After I running the above, sufficient RAM space is now available to run MS Voice Command 1.6 on my Tilt.
That said, though I may on rare occasion get the 'low memory" pop-up display, if I merely press the PTT button again, MS Voice Command launches fines with mic icon appearing. btw: I have my Microphone AGC set to: Enabled
Wilhelm, not sure, but I doubt the number of songs you've got stored in your phone or storage card would have any effect on memory usage unless you're actually running your media player & other apps concurrently while operating MS Voice Command.
Steveng2000: I've got the same exact four files (plus a few more in addition) as you in the Startup folder, but not experiencing your problem.
This said, perhaps someone else here might have other suggestions for Steveng2000 & Wilhelm to try in fixing the problem on their Tilt.
Jazz
Where is MSVC installed? It should definitely be stored on the device, not the card.
I haven't had any troubles with MSVC on my Tilt, other than still having to install ZaJules BT Command fix, enable it, reset, disable it, reset, pair headset. After that - bingo!
Hi, has anyone managed to install this, and get it to work? It doesn't install properly on my Diamond and I can only see settings for it, nothing under programmes.
I get an error along the lines of "programme not installed correctly" or something like that ... can't stand Voice Commander pre-installed.
Thanks, M.
same happend to me, but just ignore the mesage. it is installed anyway. afaik the icon for voice command always was under settings it never had one in programs.
i just installed it and it works fine, allthough it seems that the recognition is not as good as it was on my tytn. will see if it improves over time...
cheers
chaos42
Interesting. I set the button to be key 1 (same as where voice commander normally resides) and yet when I press it I just get a single tone beep response, not the normal multi-tone initiating voice command one.
Haven't tried it with my bluetooth headset yet as the charge has run out on it!
Also, has anyone figured out how to remove the installed Voice Commander?
Thanks, M.
works for me!
vc1.6 i installed it 5 times and did not work after i assigned my only f))king button it just one beep not like used to 3 beeps so i create a icon in programs dir and then link button to that it works perfect. perfect recognition if anything better and faster than any of my previos pda's
MS VC 1.7 freezes Daimond to hard reset
I Posted in another thread, but it should indeed belong here :
Hope to see a working solution for MSVC soon , an official fix from MS would even do fine.
http://forum.xda-developers.com/showpost.php?p=2323586&postcount=109
I flashed to Eslite 1.0, so i might give it another try now
I have MSVC 1.6 OK on my Diamond. It is true, that the installation tells me error when I install, but now it is OK. You can configure MSVC in Settings/Voice Command. Then:
1) you have to create link to voicecmd.exe (for example voicebtn.lnk), copy this link into \windows\star menu\programs
2) in settings/button assignment, you have to reassign long press of phone button to this new link voicebtn.lnk and now is MSVC functional
vphk said:
I have MSVC 1.6 OK on my Diamond. It is true, that the installation tells me error when I install, but now it is OK. You can configure MSVC in Settings/Voice Command. Then:
1) you have to create link to voicecmd.exe (for example voicebtn.lnk), copy this link into \windows\star menu\programs
2) in settings/button assignment, you have to reassign long press of phone button to this new link voicebtn.lnk and now is MSVC functional
Click to expand...
Click to collapse
i even did not get so far.
I tried to install 1.6 build 17913 on TLR Rom, though it gave this "unrecoverable error" again.
Rebooting resulted in a brick when tapping "settings" which forced a hard reset again damned
Will stick a while to Cyberon Voice command, though I liked MSVC better.
I have used MSVC_US_PPC 1.6.19209.bengalih.cab from pda4x.
No problem after setting Button1 to MSVC.
@ vphk
How did you make that link? Sorry neub
ceevee369 said:
i even did not get so far.
I tried to install 1.6 build 17913 on TLR Rom, though it gave this "unrecoverable error" again.
Rebooting resulted in a brick when tapping "settings" which forced a hard reset again damned
Will stick a while to Cyberon Voice command, though I liked MSVC better.
Click to expand...
Click to collapse
I suppose I am not the only one with this exact problem......I hope someone can solve this...
How to open websites in opera using voice command
I'm running a german version of MSVC v1.60.46220 and it's running very smooth. I read the tutorials and configured it to meet my needs. Now I want to open websites with opera using a simple command like "Start xda-developers". To do this I created a link (.url) in a subfolder of programs. This works with Pocket IE. To open the site in opera I changed the file association for the extension .url to \windows\OperaL.exe "%1%. Now opera starts but the home screen appears instead of the site that is linked. help appreciated
I cant get the talking ringtone to work on my diamond.
I adjusted the settings so it should work without an headset.
Do you have to adjust the ringtone somewhere?
Officer21 said:
@ vphk
How did you make that link? Sorry neub
Click to expand...
Click to collapse
to create the link mentionned by rxdoctor in post #4 :
1 - from your PC, go to \program files\voice comand on your pda (via Active Sync connection), create a shortcut here (like you would do for a file on your PC)
2- move this shortcut to \Windows\start menu\Programs on the pda
Then the name of this shortcut appears in the drop down list of programs you can assign to the button.
Now I have MS voice command working fine
Good morning. I've read many threads on PTT but things changed in 6.1 and would like to know the following. I’m new to this. I’ve been waiting for the PTT config that is in 6.1 but it allows you to change PTT to everything except what I want. I would like to have the PTT turn on wifi with one push and turn it off with push and hold.
I know there are reg edits for 6.0 but now in 6.1 button six shows up in (buttons and assign program). Is there a list of available programs to assign buttons to in the registry? If so would it now be easier to replace a link in the registry for one of the programs I wouldn't use with the link to turn on wifi found in wireless manager?
I’ve loaded PHM and was wondering if any of the registry editors work from the pc with the phone attached? Can you export the phone’s registry to a file, work on it on your pc and then import or restore it back to the phone. My eyes are getting sore.
Thanks
Frank
Try a pm to hang.tuah, http://forum.xda-developers.com/member.php?u=273310. He has it in his ROMeOS ROM. He is also very helpful and kind.
thank you for the link
I sent him my issue and await a response.
This may help
I found a way to get closer to using the PTT button to activate wifi. In 6.1 you’re given the option to assign programs to button 6, the PTT button. Unfortunately Comm. Manager and turn on wifi aren’t options that you can choose.
By messing around I discovered that you can use file explorer and scroll down in Windows until you see the comm. Manager icon. Copy this and go back up to file start menu. Paste Comm. Manager into the start menu. Comm Manager will now show up on the today screen. You can then go to settings, buttons and Comm Manager will now be an available option. You can now also use voice command (start Comm. Manager) While it doesn’t turn on wifi it does allow you to hit the old PTT button and then hit the wheel or ok, or use the voice command.
How would I go through with accessing to remove MS Voice Command from the kaiser without opening the main settings window. I installed a few applications (i.e., TouchFlo 2, Youtube, HTC Audio Manager, PTTfix and MS Voice Command 1.6) on my friends Kaiser running WM6.1. All of these programs work fine on mine (WM 6.0), but now on his the phone reboots everytime you click on settings int he start menu. The only thing I can guess thats causing it is MS Voice Command since it creates an Icon in the Settings window.
I need to either A) find a way to manually remove the icon maybe...if that could work, or B) manually find a way to uninstall voice command.
I am hoping I can fix it without him having to do a hard reset on the phone losing all his stuff.
Thanks.
jh20001 said:
How would I go through with accessing to remove MS Voice Command from the kaiser without opening the main settings window. I installed a few applications (i.e., TouchFlo 2, Youtube, HTC Audio Manager, PTTfix and MS Voice Command 1.6) on my friends Kaiser running WM6.1. All of these programs work fine on mine (WM 6.0), but now on his the phone reboots everytime you click on settings int he start menu. The only thing I can guess thats causing it is MS Voice Command since it creates an Icon in the Settings window.
I need to either A) find a way to manually remove the icon maybe...if that could work, or B) manually find a way to uninstall voice command.
I am hoping I can fix it without him having to do a hard reset on the phone losing all his stuff.
Thanks.
Click to expand...
Click to collapse
You can uninstall software with SKTools. Download a trial version from Handango and try it. If you like it, buy it! My guess is you will probably have to do a hard reset anyway to clean up that mess.
Ill do that. I'll use SKtools on his phone to remove MS Voice Command next week.
Has anyone else had this problem? It would be great for him to have Voice Command. He's been drooling over the feature on mine so long. Now that he finally has a kaiser, he can't use it because it doesn't want to work on his. No fun.
Another easy way would be to use Activesync Add/Remove Programs feature on a connected computer
I don't think he has access to a computer but I will keep that one in mind. We hadn't even had a chance to use the sktools option yet since he got sick so I haven't seen him around in a bit.
I really wish the program would have worked :/ I might try reinstalling it again ontop of itself....could do the trick. Maybe the program corrupted itself the first time some how.
version
this happend to me before, it was the version msvc i was had installed i dont remember which version though.
eisean said:
this happend to me before, it was the version msvc i was had installed i dont remember which version though.
Click to expand...
Click to collapse
This is, this is 1.6 and there is nothing newer
You could also simply create a shortcut/link that goes directly to the Add/Remove Programs settings screen.
Try putting this code in a .lnk file:
Code:
Settings>System>Remove Programs = 21#ctlpnl cplmain.cp,10
It will allow you to bypass the main Settings screen that crashes.