Hi i am on a captivate i896. I tried to install I897UCKF1. Everything was fine till it had to reboot after installation then i couldn't do anything. I can't install stock rom, the phone reboots with att logo and it doesn't do anything. I think its the bootloader that is messed up and i don't know how to install the older ones or just to be able to get back to rogers 2.1 stock or ATT 2.1 stock. I am always stuck at this screen :
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I897UCKF1_CL273832_REV02_user_low_ship.tar.md 5 is valid.
<OSM> MODEM_I897UCKF1_CL1017518_REV02.tar.md5 is valid.
<OSM> SGH-I897-CSC-ATTKF1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
When i try to install JF6 it stalls at File Analysis....
Please help.
try and get it into download mode. Its not bricked justyet.
accordztech said:
try and get it into download mode. Its not bricked justyet.
Click to expand...
Click to collapse
i tried to get in download mode and i can but i just can't get to install any stock roms i can't do anything. Do you know if i can install the booloaders or anything?
ramih2085 said:
i tried to get in download mode and i can but i just can't get to install any stock roms i can't do anything. Do you know if i can install the booloaders or anything?
Click to expand...
Click to collapse
Restart your computer and if running windows vista or 7 make sure you run Odin as an administrator and possibly even compatibility mode. I have had that problem before and a restart fixed it.
Sent from my GT-I9000 using XDA Premium App
tried it, still the same thing...
i read something about bootloaders are different for the gingerbread build than the normal eclair and froyo. I don't know if i have to do something different. I just wanna get back to stock 2.1 from there i can find my way out...
ramih2085 said:
i read something about bootloaders are different for the gingerbread build than the normal eclair and froyo. I don't know if i have to do something different. I just wanna get back to stock 2.1 from there i can find my way out...
Click to expand...
Click to collapse
Did you try the Odin 1 click for stock JF6 posted by Designgears in the development forum? It flashes both bootloaders that are need to get back to stock.
yes i did, and it stalls at file analysis....usually it works but now i don't know why!
ramih2085 said:
yes i did, and it stalls at file analysis....usually it works but now i don't know why!
Click to expand...
Click to collapse
Try a different usb port and/or cable.
jhernand1102 said:
Try a different usb port and/or cable.
Click to expand...
Click to collapse
I tried all the usb ports on my computers. Odin always detects my phone but for some reason i can't install anything on it.
ramih2085 said:
I tried all the usb ports on my computers. Odin always detects my phone but for some reason i can't install anything on it.
Click to expand...
Click to collapse
I has an issue like this once where it would get stuck during the flash and my screen would turn different colors. I got it to work by using the full odin where you can select the pda & pit files. Give it a try.
jhernand1102 said:
I has an issue like this once where it would get stuck during the flash and my screen would turn different colors. I got it to work by using the full odin where you can select the pda & pit files. Give it a try.
Click to expand...
Click to collapse
i did that too, nothing worked...
anyone has an idea of what to do?
ramih2085 said:
anyone has an idea of what to do?
Click to expand...
Click to collapse
Try using the Odin version provided in this thread:
http://forum.xda-developers.com/showthread.php?t=1127249
It should restore to stock 2.3.3 Gingerbread. Not sure if being a UCKF1 poses a problem in your device or location, but I suppose it's worth a shot. Note that the rest of the instructions is to root the device, you don't need to do all those other steps. Just download the Odin One-Click, and try it out. Regards.
ramih2085 said:
I tried all the usb ports on my computers. Odin always detects my phone but for some reason i can't install anything on it.
Click to expand...
Click to collapse
I have the same problem . Please help ! Thankss.
ramih2085 said:
i did that too, nothing worked...
Click to expand...
Click to collapse
my AT&T Captivate is 2.2 stock with root,unlocked . I flash Stock+voodoo-froyo I897 UCKB1.tar. it said FAIL. try to go back 2.1 stock but it can't do anything.Please help! Thanks
ramih2085 said:
i did that too, nothing worked...
Click to expand...
Click to collapse
what is PIT files ? and how can I get it ? I want to try it .Thanks .
Mr. Janderson said:
Try using the Odin version provided in this thread:
http://forum.xda-developers.com/showthread.php?t=1127249
It should restore to stock 2.3.3 Gingerbread. Not sure if being a UCKF1 poses a problem in your device or location, but I suppose it's worth a shot. Note that the rest of the instructions is to root the device, you don't need to do all those other steps. Just download the Odin One-Click, and try it out. Regards.
Click to expand...
Click to collapse
i tried that and here is the log:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
also for the pit file, it is usually included in the zip file with odin 3 click so if you download odin 1 click, u dont need that file.
captivate bricked
flashing power off charging logo when try to reboot . no down load mode cant do sh%t.help please
See the "Captivate Connection Issues and Download Mode Help" that is linked in my signature below.
If that does not help then...
Sounds like you are gonna need a JIG. See my signature link below for links to how to make one or where to buy one.
When you get back into download mode, you are gonna need to flash a Stock Firmware of your choice. There is a sticky thread in the Captivate Development Forum that you will need to see for those.
Related
Please i need some help, i was on Gingerbread XXJVO Rom with fugumod 3.9 ultra kernel, done a format in CWM. Then tried to flash XXJVH stock rom in ODIN but message in ODIN says
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> There is no memory.
<OSM> PDA_XWJVH_Deodexed_Zipaligned.tar.md5 is invalid.
<OSM> End...
Now my phone wont work properly, have tried XWJVB and XXJPU roms but same thing... have tried 512/803 pits please help me! Thanks
are you sure that this is not the developpers version of the roms ? you should get the one here and try again :
http://forum.xda-developers.com/showthread.php?t=1011901
Also choose the one with bootloader or you won't be able to start your phone.
Change your bootloader back to froyo version.
Use Odin 1.0. Connect the phone in download mode and hit Start without loading anything. Wait a few seconds until the program says: Done! Do this a few times if the process hangs.
Then flash some Eclair rom with repartition.
After that make a full hard reset *2767*3855#. Now I think your phone should be fine.
If you want to install Gingerbread again, flash the new bootloaders.
celeronix said:
Change your bootloader back to froyo version.
Use Odin 1.0. Connect the phone in download mode and hit Start without loading anything. Wait a few seconds until the program says: Done! Do this a few times if the process hangs.
Then flash some Eclair rom with repartition.
After that make a full hard reset *2767*3855#. Now I think your phone should be fine.
If you want to install Gingerbread again, flash the new bootloaders.
Click to expand...
Click to collapse
May i know what does it make to hit start whitout loading anything on odin 1.0 ?
I can hardly say what exactly does that intervention, but as far as I know it fixes some NAND flash problems on software bricked devices.
jscnz81 said:
Please i need some help, i was on Gingerbread XXJVO Rom with fugumod 3.9 ultra kernel, done a format in CWM. Then tried to flash XXJVH stock rom in ODIN but message in ODIN says
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> There is no memory.
<OSM> PDA_XWJVH_Deodexed_Zipaligned.tar.md5 is invalid.
<OSM> End...
Now my phone wont work properly, have tried XWJVB and XXJPU roms but same thing... have tried 512/803 pits please help me! Thanks
Click to expand...
Click to collapse
Are you sure you have enough memory on your PC? Odin may need much memory to check md5, i think nothing has changed on your sgs because Odin can't check the file hash.
Your computer memory can't cause such kind of a problem.
It's probably connected with the bootloader.
celeronix said:
Your computer memory can't cause such kind of a problem.
It's probably connected with the bootloader.
Click to expand...
Click to collapse
I'm pretty sure this has nothing to do with the bootloader. If he got bootloop, it's because odin found a pit, it partitionned the phone so there is no more rom in the phone, and then failed to hash the files and didn't flash. Can you link me where you downloaded your software ? Or try to go back on your working XXJVO ?
You need to repartition your device. In my opinion, it looks like the /system partition is too small. (Check pit file used) And wrong section. Please post in the Q&A Section in the future.
chadouming said:
I'm pretty sure this has nothing to do with the bootloader. If he got bootloop, it's because odin found a pit, it partitionned the phone so there is no more rom in the phone, and then failed to hash the files and didn't flash. Can you link me where you downloaded your software ? Or try to go back on your working XXJVO ?
Click to expand...
Click to collapse
He doesn't got a bootloop. The phone just doesn't work. All you can do is to put it in download mode. That's it.
I had exactly the same problem with mine as described above. And yes, you should make a repartition along with the other stuff.
What software are you talking about?
hi people,
So here is my issue, i rooted my tab after having it about a year and wanted to install a custom rom, installed RomManager from the market and installed the clockwork recovery mod, BUT i picked galaxy tab 10.1 when it asked me what phone i had, as there was no other option. I checked on google first and it seems other people with the 8.9 are using the clockwork recovery mod so i thought it was safe.
Now its dead and powers up to the samsung logo, and then dies again.
Help! (currently i am draining the battery as it is mentioned in another thread in this forum)
Thanks
(tried the APX thing in nvflash and it was a no go)
epictwiglet said:
hi people,
So here is my issue, i rooted my tab after having it about a year and wanted to install a custom rom, installed RomManager from the market and installed the clockwork recovery mod, BUT i picked galaxy tab 10.1 when it asked me what phone i had, as there was no other option. I checked on google first and it seems other people with the 8.9 are using the clockwork recovery mod so i thought it was safe.
Now its dead and powers up to the samsung logo, and then dies again.
Help! (currently i am draining the battery as it is mentioned in another thread in this forum)
Thanks
(tried the APX thing in nvflash and it was a no go)
Click to expand...
Click to collapse
It's alright. Go to the guide in my signature and read up about ODIN because you will use it to save your tablet. It's all there in FAQs, How-tos and the Toolkit at the end.
i highly recommend checking out nirogu325's guide for an explanation of ODIN. it should solve your problem
Download Odin
http://www.google.com/url?sa=t&rct=...IxHp1ISlP2fzGKhtw&sig2=4EbBRrWss7eeO2JNr8TzzA
Download the proper recovery
7310 and 7300
http://forum.xda-developers.com/showthread.php?t=1312218
i957
http://forum.xda-developers.com/showthread.php?t=1462770
Power on the tablet, you may need to charge it.
As it is powering on hold down the power and the vol down button
Go into download, not recovery
Connect your tablet to your computer with the USB cable
Open up Odin
You should see box that says PDA, click there and it will want you to find a file. Choice the recovery file
Make sure the box that says partition or repartion are NOT check
then check start and wait. DO NOT touch or disconnect the tablet while it works
bdfull3r said:
i highly recommend checking out nirogu325's guide for an explanation of ODIN. it should solve your problem
Download Odin
http://www.google.com/url?sa=t&rct=...IxHp1ISlP2fzGKhtw&sig2=4EbBRrWss7eeO2JNr8TzzA
Download the proper recovery
7310 and 7300
http://forum.xda-developers.com/showthread.php?t=1312218
i957
http://forum.xda-developers.com/showthread.php?t=1462770
Power on the tablet, you may need to charge it.
As it is powering on hold down the power and the vol down button
Go into download, not recovery
Connect your tablet to your computer with the USB cable
Open up Odin
You should see box that says PDA, click there and it will want you to find a file. Choice the recovery file
Make sure the box that says partition or repartion are NOT check
then check start and wait. DO NOT touch or disconnect the tablet while it works
Click to expand...
Click to collapse
So i dont need the clockwork recovery mod files? just the stock recovery? and it wont boot to download mode so i cant connect it to odin unless im missing something, let me read it again.....
Ok! i have managed to get to download mode, i discharged the tab overnight and plugged it in this morning and he booted past the samsung logo, i cant remember what thread i saw that idea in but it worked. awesome, now to try and flash stock recovery, hope i dont duck it up!
Thanks guys, ill post again if it doesnt work @)
nirogu325 said:
It's alright. Go to the guide in my signature and read up about ODIN because you will use it to save your tablet. It's all there in FAQs, How-tos and the Toolkit at the end.
Click to expand...
Click to collapse
all i get is:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> recovery.img.md5 is invalid.
<OSM> End...
Booooo, now what? im using an old version of odin, so maybe ill try and new one?
Solved! So i was putting the MD5 file and it wasnt working, so i put the whole .RAR file in and it worked! It wouldnt flash the clockwork recovery mod though so i had to put the stock one back on.
Still it works again, thanks guys.
epictwiglet said:
Solved! So i was putting the MD5 file and it wasnt working, so i put the whole .RAR file in and it worked! It wouldnt flash the clockwork recovery mod though so i had to put the stock one back on.
Still it works again, thanks guys.
Click to expand...
Click to collapse
I am glad you have your tablet back in working order.
Well now that you have the stock recovery, you can attempt to flash the Clockwork recovery again the right way if you want to. You now know how to recovery your tablet if you have a brick again so you don't have anything to lose
hi can someone help me with a brick i957. i am not seeing anything on the lcd its totally black however when i plug the usb to the pc its being recognized as Qualcom hs-usb diagnostics 9006. i thought well maybe i can flash it with odin but this is all i am getting:
<ID:0/155> Added!!
<ID:0/155> Removed!!
<ID:0/155> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWMR5x_i957_recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/155> Odin v.3 engine (ID:155)..
<ID:0/155> File analysis..
<ID:0/155> SetupConnection..
and its been there for almost 45 mins with no response. any help will be greatly appreciated.
Linkzz said:
hi can someone help me with a brick i957. i am not seeing anything on the lcd its totally black however when i plug the usb to the pc its being recognized as Qualcom hs-usb diagnostics 9006. i thought well maybe i can flash it with odin but this is all i am getting:
Added!!
Removed!!
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
CWMR5x_i957_recovery.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:155)..
File analysis..
SetupConnection..
and its been there for almost 45 mins with no response. any help will be greatly appreciated.
Click to expand...
Click to collapse
If Odin recognizes the tab there is a chance to recover it. What rom are you trying to flash? Go to sammobile.com and get the stock gb rom.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
i am using a stock rom from sammy roms but same problem
<ID:0/155> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_I957UCLK4_CL1167230_REV02_user_low_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/155> Odin v.3 engine (ID:155)..
<ID:0/155> File analysis..
<ID:0/155> SetupConnection..
Try with odin ver 1.85. I haven't had luck with 3.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
Try with odin ver 1.85. I haven't had luck with 3.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
thats what i have been using; when i try with odin3 v3.07 its not recognizing the tablet
I know it doesn't make sense but keep trying to flash the rom. I've seen it not work for many tries and then it would for some reason. If odin recognizes the tab you are not hard bricked. You should be able to get it to operate again.
Also, use the gb Rom, uckj7
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
hello,
i was using my note when i got a battery warning and i just continued to use my phone and battery just died ( all normal)
when this morning i tried to charge my phone it appeard to be stuck on the "galaxy note gt-n7000"- screen and i just can't get it to start up
i left it in the charger all day but still no use.
the phone has never been flashed before and runs on official ICS 4.0.3
someone please help me really dunno what to do
I've seen Notes being stuck there, and mostly they are bricked cause of emmc or a corrupted kernel. Are yiu sure didn't flash anything? What was your last activity before your Note died?
vlxdxmxr said:
I've seen Notes being stuck there, and mostly they are bricked cause of emmc or a corrupted kernel. Are yiu sure didn't flash anything? What was your last activity before your Note died?
Click to expand...
Click to collapse
i was just playing a game from android market,
my phone has never been flashed everything was official and working well
what's emmc or the kernel thing,
sorry to ask but i'm a total noob at this.
and is there a way to fix this?
MrPlox said:
what's emmc or the kernel thing,
sorry to ask but i'm a total noob at this.
and is there a way to fix this?
Click to expand...
Click to collapse
hmmm from the sounds of it... your phone is not brick... it just entered into a very deep slumber mode...
one thing you can revive to wake it is perhaps to get a usb jig and revive your phone using it.
Or, you can try Holding the power button down, holding Volume key Down and the Home key all at the same time.....while your phone is plug to the charger...
See if something will come up on the screen....
letters_to_cleo said:
hmmm from the sounds of it... your phone is not brick... it just entered into a very deep slumber mode...
one thing you can revive to wake it is perhaps to get a usb jig and revive your phone using it.
Or, you can try Holding the power button down, holding Volume key Down and the Home key all at the same time.....while your phone is plug to the charger...
See if something will come up on the screen....
Click to expand...
Click to collapse
when i push the volume down+home+power button it goes into download mode and it asks me if i want to restart the phone or continue putting another OS on it
MrPlox said:
when i push the volume down+home+power button it goes into download mode and it asks me if i want to restart the phone or continue putting another OS on it
Click to expand...
Click to collapse
Flash gb rom use pc odin only, after flashing gb rom if still stuck in logo go to recovery mode and wipe data and cache.
jonpaslim said:
Flash gb rom use pc odin only, after flashing gb rom if still stuck in logo go to recovery mode and wipe data and cache.
Click to expand...
Click to collapse
Reflash ICS v4.0.4 its will improve the battery performance via pc odin
well i tried to flash another one but it gets stuck at NAND write and stays there
MrPlox said:
well i tried to flash another one but it gets stuck at NAND write and stays there
Click to expand...
Click to collapse
Which Rom you are trying to flash ? Please post the details...
And I recommend you to flash a pre rooted GB Rom/Directly Rooted GB Rom via PC Odin..
sahilarora2003 said:
Which Rom you are trying to flash ? Please post the details...
And I recommend you to flash a pre rooted GB Rom/Directly Rooted GB Rom via PC Odin..
Click to expand...
Click to collapse
well can you recommend me a good rom pls?
after getting stuck at NAND write when i start up the phone i get the bootscreen with a yellow triangle beneeth it
can some1 give me a step by step tutorial on how to fix it cuz i'm not really experienced in flashing n stuff
only thing i've ever done was rooting an acer liquid
thx in advance
MrPlox said:
well can you recommend me a good rom pls?
after getting stuck at NAND write when i start up the phone i get the bootscreen with a yellow triangle beneeth it
can some1 give me a step by step tutorial on how to fix it cuz i'm not really experienced in flashing n stuff
only thing i've ever done was rooting an acer liquid
thx in advance
Click to expand...
Click to collapse
Read this http://forum.xda-developers.com/showthread.php?t=1810954
Follow Dr.Ketan guide,you will be fine...:good:
MrPlox said:
well can you recommend me a good rom pls?
after getting stuck at NAND write when i start up the phone i get the bootscreen with a yellow triangle beneeth it
can some1 give me a step by step tutorial on how to fix it cuz i'm not really experienced in flashing n stuff
only thing i've ever done was rooting an acer liquid
thx in advance
Click to expand...
Click to collapse
http://d-h.st/HJM
Flash it via PCODIN
MrPlox said:
hello,
i was using my note when i got a battery warning and i just continued to use my phone and battery just died ( all normal)
when this morning i tried to charge my phone it appeard to be stuck on the "galaxy note gt-n7000"- screen and i just can't get it to start up
i left it in the charger all day but still no use.
the phone has never been flashed before and runs on official ICS 4.0.3
someone please help me really dunno what to do
Click to expand...
Click to collapse
It should not happen such with you...
If you are out of battery on official ROM, generally by getting it charged back can resolve the issue...
Try to recall, you must Gabe something else...
|Th£ G®£@t [email protected] [email protected]|@x¥ |\|0t€|:banghead:
MrPlox said:
hello,
i was using my note when i got a battery warning and i just continued to use my phone and battery just died ( all normal)
when this morning i tried to charge my phone it appeard to be stuck on the "galaxy note gt-n7000"- screen and i just can't get it to start up
i left it in the charger all day but still no use.
the phone has never been flashed before and runs on official ICS 4.0.3
someone please help me really dunno what to do
Click to expand...
Click to collapse
Did get any help?
I have the same problem.
I wasn't using any custom rom
I have Galaxy Note N7000
i was running stock ICS 4.0.4 (open Germany) [N7000XXLRK_N7000DBTLRK_DBT]
My phone was rooted but with no custom binary counts.
I install beat audio driver and I count restart my phone. it was stuck on the samsung screen
I didnt have any back up so i tried to use Odin and re-flash my stock ICS firmware but its stuck at NAND write start!!!
I have read so many threads but it hasn't helped. it seems like almost everyone is using custom roms
i even got one binary count follow the tutorial on this thread after i flashed a kernel (4pda_kernel.tar) http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
Ive also tried stock gingerbread still stock there..
My phone is able to enter recovery mode or download mode or stock in the samsung screen..
PLEASE can someone help with something that works..?
sahilarora2003 said:
http://d-h.st/HJM
Flash it via PCODIN
Click to expand...
Click to collapse
well imma try just flashing stock ics from dr Ketan right now and i'll let you guys know what the result is
well i tried flashing a stock GB rom with odin 1.85 i followed everything step by step an odin gets stuck at zImage:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7000XXLA3_CL880036_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7000XXLA3_REV_05_CL1095424.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXALA3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> Sbl.bin
<ID:0/009> param.lfs
<ID:0/009> zImage
i tried other cable, other usb ports even other computer and always same results can anyone help me out plz
MrPlox said:
well i tried flashing a stock GB rom with odin 1.85 i followed everything step by step an odin gets stuck at zImage:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7000XXLA3_CL880036_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7000XXLA3_REV_05_CL1095424.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXALA3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> Sbl.bin
<ID:0/009> param.lfs
<ID:0/009> zImage
i tried other cable, other usb ports even other computer and always same results can anyone help me out plz
Click to expand...
Click to collapse
Havent seen any update from u... have u managed to rectify the issue?
nokiamodeln91 said:
Havent seen any update from u... have u managed to rectify the issue?
Click to expand...
Click to collapse
no havan't been able to fix it yet it's a pretty tough issue, now i'm following a guide to completely repartition the phone cuz there might be a bad sector
Try re-flash back with PCODIN and once flashed and still stuck at 'samsung' boot screen, press vol up + home + power button and do a factory reset. Then reboot system/wipe data cache.
Well, I'm a complete noob, though I have a rooted ICS, I never tried to flash a ROM 'till now, but I really wanted to see JellyBean running on my phone.
What I did:
> Saw this thread http://forum.xda-developers.com/showthread.php?t=1953847
> Downloaded the ROM
> I read the first step as "make sure you are on a (rooted ICS-ROM) or (JB-ROM with CWM recovery and brickfree kernel installed)" and not "make sure you are on a [(rooted ICS-ROM) or (JB-ROM with CWM recovery)] and brickfree kernel installed"
> Since I had a "rooted ICS-ROM" I continued to next step, copied he ROM, booted in recovery and did a FullWipe. Obviously, I didn't see the brickbug warnings which even a 5 year old with one eye :cyclops: would have seen.
> So, just to be safe I flashed abyssKernel 4.2 from ODIN via Download Mode (Volume Down + power + home)
> Now I have the yellow triangle and raised flash counter
> Finally I tried to flash Stock ICS ROM from Dr Ketan's guide http://forum.xda-developers.com/showthread.php?t=1424997
Now this is what I see in the Odin3 v1.85 message box:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DDLR9_N7000ODDLR3_N7000DDLR1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
Help plz :| :crying:
clear this step
> Since I had a "rooted ICS-ROM" I continued to next step, copied he ROM, booted in recovery and did a FullWipe
you had just rooted ICS or root + safe kernel, I mean which kernel was there at the time you wiped.
another thing you didn't mentioned have you flash that ROM you have copied to SD or not
Your log still can't confirm brick, keep patience and reply to queries above
as well confirm your device was in download mode while flashing ROM with Odin as well ID com port was added in Odin (I can't see in log).
dr.ketan said:
clear this step
> Since I had a "rooted ICS-ROM" I continued to next step, copied he ROM, booted in recovery and did a FullWipe
you had just rooted ICS or root + safe kernel, I mean which kernel was there at the time you wiped.
another thing you didn't mentioned have you flash that ROM you have copied to SD or not
Your log still can't confirm brick, keep patience and reply to queries above
as well confirm your device was in download mode while flashing ROM with Odin as well ID com port was added in Odin (I can't see in log).
Click to expand...
Click to collapse
Actually, I'm not sure which kernel I had, I think I had either the default kernel or the AbyssKernel (I never used any other kernels)
I didn't flash the copied ROM
And yes, the device was in download mode while flashing stock ICS and ID:COM in odin turned yellow.
Do you remember how you had root ICS?
Anyway issue is not seems that, your device was not added
repeat procedure
Confirm you have installed Kies/Adb driver
Put device in download mode
connect device
ID com should turn yellow
select PDA for ROM file
Hit 'start' to flash
dr.ketan said:
Do you remember how you had root ICS?
Click to expand...
Click to collapse
I followed rootgalaxynote's guide for ICS
http () ://rootgalaxynote. () com/galaxy-note-root/how-to-root-ics-on-galaxy-note-gt-n7000-no-computer-required/
(Sorry I cant post links as I am a new user, so remove the brackets)
Anyway follow as said in my previous post
And yes, you were on which ROM ?(answer this before reflashing, if you were on DDLR9 just flashing kernel will be enough)
dr.ketan said:
Anyway follow as said in my previous post
And yes, you were on which ROM ?(answer this before reflashing, if you were on DDLR9 just flashing kernel will be enough)
Click to expand...
Click to collapse
Yes, I was in DDLR9
Also, I can't even get into download mode now, it says "Low battery! cant download!".
And it is plugged in to the computer for almost two hours now
switch off device and plugin to charger it may get charged. if you get into download mode do this
Ok then download this
http://www.mediafire.com/?b7yee04jkcf60g6
and flash with PC Odin (your counter already raise so nothing to worry about it)
you have to select this file for PDA tab, rest of instruction as few post above said
Otherwise manage for charged battery
dr.ketan said:
switch off device and plugin to charger it may get charged. if you get into download mode do this
Ok then download this
http://www.mediafire.com/?b7yee04jkcf60g6
and flash with PC Odin (your counter already raise so nothing to worry about it)
you have to select this file for PDA tab, rest of instruction as few post above said
Otherwise manage for charged battery
Click to expand...
Click to collapse
Currently its not going into download mode, willl try to get a charged battery and post the results as soon as I can. Thanks in advance.
Also, I get this
'charging_q1.jpg' draw failed
message.
No problem just try download mode working or can you start recovery mode
Sent from my GT-N7100 using xda premium
dr.ketan said:
No problem just try download mode working or can you start recovery mode
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Your a saint ,Dr...!
Sent from my GT-N7000 using Tapatalk 2
howard bamber said:
Your a saint ,Dr...!
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
+1. DR. K, you are always there helping when some one in lost. I remember you said that you no longer own a G.NOTE, but instead a G.NOTE2, but you are so willing to help those whoever facing problem. You are a SAINT. big applause. thank you so much
Sent from my GT-N7000 using Tapatalk 2
I succesfully flashed PhilZ and then tried to flash the stock ICS ROM but it failed.
The Odin message box showed the following:
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DDLR9_N7000ODDLR3_N7000DDLR1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> zImage
<ID:0/013> NAND Write Start!!
<ID:0/013> modem.bin
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/013> Removed!!
May be remove the battery for a few seconds, reinsert and go download mode again and fladh
nokiamodeln91 said:
May be remove the battery for a few seconds, reinsert and go download mode again and fladh
Click to expand...
Click to collapse
Tried, no result, still says low battery cant download :/
I think I should go to the service center then.
either charge the battery on a diff note or try a full charged battery
Samsung service centre had to replace my motherboard. Now it's alright.
I installed tablet metrics with xposed installer. Then I used my phone normally for a few days and it started...
The phone started to reboot without reason. It just went crazy. I couldn't use it. Every time it turned on, 15 secs later started to reboot again. So I tried to uninstall xposed installer but didn't work. After doing that, my phone didn't boot anymore. It stayed in the "samsung" part. Then I went to recovery mode and did all the wipes possible, wipe cache, wipe factory reset, etc. Did everything but one, format data. And didn't boot. And as a last hope I did format data.
I shouldn't have done that.
Now I don't know what to do. Need some help, please.
I have installed the TWRP recovery. When I try to reboot it says "no OS installed". There is no way to install from TWRP a new OS ?
If you don't understand me or want me to add some more information just put it in the comments.
I don't speak english very well as you might know. Sorry.
Lele123 said:
I installed tablet metrics with xposed installer. Then I used my phone normally for a few days and it started...
The phone started to reboot without reason. It just went crazy. I couldn't use it. Every time it turned on, 15 secs later started to reboot again. So I tried to uninstall xposed installer but didn't work. After doing that, my phone didn't boot anymore. It stayed in the "samsung" part. Then I went to recovery mode and did all the wipes possible, wipe cache, wipe factory reset, etc. Did everything but one, format data. And didn't boot. And as a last hope I did format data.
I shouldn't have done that.
Now I don't know what to do. Need some help, please.
If you don't understand me or want me to add some more information just put it in the comments.
I don't speak english very well as you might know. Sorry.
Click to expand...
Click to collapse
You are on stock JB? Flash stock firmware with Odin. Do not flash I9070 firmware on I9070P phone, do not flash I9070P firmware on I9070 phone - IT WILL HARDBRICK phone - no more going back.
Odin how to: http://forum.xda-developers.com/showthread.php?t=1985398
Firmwares: samsung-updates.com sammobile.com
Do factory reset after.
shut_down said:
You are on stock JB? Flash stock firmware with Odin. Do not flash I9070 firmware on I9070P phone, do not flash I9070P firmware on I9070 phone - IT WILL HARDBRICK phone - no more going back.
Odin how to: http://forum.xda-developers.com/showthread.php?t=1985398
Firmwares: samsung-updates.com sammobile.com
Do factory reset after.
Click to expand...
Click to collapse
It doesn't work...
The Odin get's stuck in this part:
<ID:0/020> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_I9070XXLPZ_I9070SERLPZ_660490_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
Thanks for your comment
Lele123 said:
It doesn't work...
The Odin get's stuck in this part:
<ID:0/020> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_I9070XXLPZ_I9070SERLPZ_660490_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
Thanks for your comment
Click to expand...
Click to collapse
Does the size of downloaded firmware match the size written on the page when you start download? I think XXLPZ is one of the oldest FW, try LQL for example.
shut_down said:
Does the size of downloaded firmware match the size written on the page when you start download? I think XXLPZ is one of the oldest FW, try LQL for example.
Click to expand...
Click to collapse
I've tried with XXLQUE and XXLPZ, gives me the same error. I will try with LQL when the download completes
Lele123 said:
I've tried with XXLQUE and XXLPZ, gives me the same error. I will try with LQL when the download completes
Click to expand...
Click to collapse
Try other version of Odin too. 3.0.7 for example.
shut_down said:
Try other version of Odin too. 3.0.7 for example.
Click to expand...
Click to collapse
I did it with LQL, didn't work...
Lele123 said:
I did it with LQL, didn't work...
Click to expand...
Click to collapse
Maybe your phone have some hardware issue, you told that it was rebooting every 15 seconds. Better go to some service centre.