Hi i download haret 0.5.2 and all files i need to make htc tytn II adroid but when i start to run haret my phone stuck.....can anybody shaw me the right walkthrout to make it right?
Maybe the same problem I had with my hx4700 last night, it would freeze and error out. Then I tried a much earlier version of HaRET ,0.1.3 I think, and booted without troubles after that. My advice would be to find some older versions and try those first.
Related
hi
i had installed wm 6.5 (lost in asia version 6.5) on my HD. i cant able to boot android on my phone. android will work on wm 6.5 ?. when run "haret" its goes to command screen then hanging a long time. i have to remove the battery to boot it my HD. i am using sandisk 8gb mmc. can anyone help me in this.
2255
when u start haret... winmo will be deactivated....
Yes, so it doesnt matter what version of winmo you use.
Try downloading it again and unpacking it to the Root of your memory stick (so not in any folders).
Also, try putting the touch hd in activesync mode and connect to a pc, then try to boot android.
As it is though, dont put time in to getting that version of android version as tuxhero is completely restarting the project - rewriting all of the code, so expect that work better anyway.
Hi,
I have some trouble on upgrading my Xperia X1 to Windows Mobile 6.5.
I tried to upgrade some months ago with the same error. Now I finally wanted to upgrade, but it doesnt work.
Ive read several instructions here and on a German board, but unfortunately without any success.
The only thing Ive noticed: HardSPL says, that I am running version 1.05.x on my phone and the new version would be 1.00.x, could this be the reason for the breakdown?
I am also looking for a current German Rom for the X1. The one I tried is from http://forum.xda-developers.com/showthread.php?t=526133
I'm not sure, if there are any newer versions, but it would be nice, if someone could help me.
Here is what I did:
- downloaded the german rom, mentioned above
- unpacked the kovsimg.nbh and put it onto my SD card
- started the HardSPL with the instruction
-> error 260 at 0% (after like 1 minute)
Please help me, I dont know, what I am doing wrong
PCServe said:
Hi,
I have some trouble on upgrading my Xperia X1 to Windows Mobile 6.5.
I tried to upgrade some months ago with the same error. Now I finally wanted to upgrade, but it doesnt work.
Ive read several instructions here and on a German board, but unfortunately without any success.
The only thing Ive noticed: HardSPL says, that I am running version 1.05.x on my phone and the new version would be 1.00.x, could this be the reason for the breakdown?
I am also looking for a current German Rom for the X1. The one I tried is from http://forum.xda-developers.com/showthread.php?t=526133
I'm not sure, if there are any newer versions, but it would be nice, if someone could help me.
Here is what I did:
- downloaded the german rom, mentioned above
- unpacked the kovsimg.nbh and put it onto my SD card
- started the HardSPL with the instruction
-> error 260 at 0% (after like 1 minute)
Please help me, I dont know, what I am doing wrong
Click to expand...
Click to collapse
not many details, but let's see
you successfully flashed h-spl (from olinex thread)? and when trying to flash custom rom you get the error 260? that right?
ensure to use customruu for flashing and not the ruu (hardspl.exe) from h-spl thread
if you use sd for storage of rom image, why not flash using sd-method in the first place?
a newer german rom is here
When I go to boot android from my SD card it won't load. I run Haret.exe and then the linux boot screen comes up, but then i get this message at the bottom:
Kernel panic - not syncing attempted to kill init!
2.165865 Rebooting in 3 seconds.
After this last line it stays frozen forever. I am using Myn's latest Warm Donut, and yes I have all the files on my SD cards root, and it is formatted to FAT. I haven't taken anything out of the files that I downloaded. Any help would be greatly appreciated.
Thanks for all the great work
Same thing happened to me
I used to do this kind of stuff on my Kaiser. I don't know what is wrong. But, I get the exact same problem.
HELP same is happening to me.
I get the same message on my sprint Touch.
Kernel panic - not syncing attempted to kill init!
2.165865 Rebooting in 3 seconds.
does anyone know the solution to this. I tried Myn with same freeze. Android 1.5 worked but then it shuts down after 5 min.
All other builds give me the same message and then FREEZE.
Thanks for your help.
2.165850 Rebooting in 3 seconds
Please help!
I am seeing many others with this same issue when booting from SD when I searched for "attempted to kill init!" under Vogue CDMA.
Kernel panic - not syncing g: attempted to kill init!
2.165850 Rebooting in 3 seconds
After that it just stays frozen. Any help would be great appreciated.
I had this exact same problem yesterday and I finally solved it after messing with the phone all morning.
I am using the verizon version of the phone btw and I am kind of a newb to this whole process.
The boot problem ceased after I installed windows mobile 6.1. I can't post the link because I am new to this forum, but it was a verizon package of windows 6.1 that included a radio update. I think the reason it fixed the boot problem was because it updated the radio.
Please note that by doing this I had to call verizon and re-activate my phone on their network (while having windows mobile 6.1 installed on the phone.)
After installing windows mobile 6.1 on the phone (with included radio update), I was able to flash to Android with no problems and no longer got the freeze up at "rebooting in 3 seconds.."
Hope this helps!
2.165850 Rebooting in 3 seconds
zmanb said:
I had this exact same problem yesterday and I finally solved it after messing with the phone all morning.
I am using the verizon version of the phone btw and I am kind of a newb to this whole process.
The boot problem ceased after I installed windows mobile 6.1. I can't post the link because I am new to this forum, but it was a verizon package of windows 6.1 that included a radio update. I think the reason it fixed the boot problem was because it updated the radio.
Please note that by doing this I had to call verizon and re-activate my phone on their network (while having windows mobile 6.1 installed on the phone.)
After installing windows mobile 6.1 on the phone (with included radio update), I was able to flash to Android with no problems and no longer got the freeze up at "rebooting in 3 seconds.."
Hope this helps!
Click to expand...
Click to collapse
Thanks zmanb!
I got it to work after updating my ROM to WM6.1 with new Radio from HTC web at: htc.com/us/support/touch-sprint/downloads#133
Thanks again for your reply. I am now running : Myn’s Warm Donut - [RLS 5 - 04/24/2010] -Added X10 & Teds Espresso Themes 04/26
Use the sprint one, it unlock gps as well.
Alright, before I get any complaints, I'm not reading through 33 pages of "How to install Android" to see if anyone has this problem as well. It's a simple question I have, so your patience in possibly reading it again is appreciated.
*steps off soapbox*
I have an Xperia X1a. I have Windows 6.1 currently running on it. I've downloaded a current Android 2.2 install from the late Myxperoid, unzipped it to the root of my Micro-sd card, ran Haret.exe, got a bunch of code, the phone rebooted... and it booted Windows immediately. I've tried four different android installs, following all instructions, and this still happens. No Android, just Windows every time.
Why?
I think that Windows Mobile 6.5 Rom works with me is it applied to the 2.2 of the typical mistakes with android
which windows version doesn't really matter
use this version of android http://forum.xda-developers.com/showthread.php?t=709632
but not the latest version, as it has some stability issues, so you should use the previous version!
also format your sd card before you put the files on it
Hey there guys,
Long time since i've dealt with my diamond..
unfortunately, after putting a couple of hours into trying several ROMs/Radios and 2 versions of Android for diamond, i STILL can't get this to run.
Installation seems to go properly... and the startup files are from the original builds.. and still, when i run haret, instead of booting into android, it reboots after the green line loads.. and goes back to WM.
I'd appreciate if any of you has an idea as to why it would happen.
thanks in advance.
I have the same problem with the newer version of haret on my blackstone. Did you find a solution?
Same problem to me.
I don't know what happends
Diamond: diam300
Android : FroyoBV6
Every time I press haret , Diamond reboot and star Winmo again
Not sure if this is related, but I am having the same problem with 5/31/2011 HaRET on my rhodium 210...