[Q] Usb debuging not connected on cm7.1? - Nook Color General

When I connect my nook color to pc, nook shows that usb debuging is conected now, but on my pc neither the hardware manager shows something like android device nor other app detect this.
And when I manually unselect the usb debuging and reselect,it just shift to the usb mass storage page.I dont know why.
I am running the newest cm7.1 RC1
Sorry for my bad English, Please help!!Thanks!!

I have spent a long time trying to get the USB connection to work with adb with no success. In the end I just installed adbWireless from the market. It works flawlessly...
Sent from my CM7 Nook using XDA Premium App

Maybe that's a good solution.I wonder whether it is a bug?

iamjesse said:
I wonder whether it is a bug?
Click to expand...
Click to collapse
I don't know. Has anybody managed to connect their CM7 Nook to adb via USB?
Sent from my Nook using XDA Premium App

I had to reboot the computer with the device connected

Related

[Q] why does my galaxy s isnt detected by pc?

before this problem happen, my pc give a notification : usb not recognised. then i tried to fix this problem by removing the usb driver and install it again. after the new driver was installed, my phone cant be detected.when i plugged in the usb to pc, it only charge the phone. the notification of connecting to pc at my galaxy s doesnt show up. ive tried on other pc also. still nothing.
how can i make my galxy s connect back to pc again?
odin did not recognize my phone. when plug to pc, no device connect sound. nothing. the only thing it does is charging my phone.
Connect USB to mainboard usb port .
Install latest Kies .
Reboot phone .
Connect phone with Debugging off .
Connect phone in USB mass storage mode and wait for windows to find drivers and install them .
jje
Hi
I have exactly the same problem. I've tried all the above mentioned suggestions nothing worked for me
Had the same issue, try usb debugging on and then connect to pc or mac
Sent from my GT-I9000 using XDA App
iplaman said:
Had the same issue, try usb debugging on and then connect to pc or mac
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Tried that as well and still not recognized. I'm beginning to this the problem is from the phone itself, cause i've tried it on my PC and Mac and both had the same results (not recognized)
However the phone is working normally, except to this problem
Check for damaged pins in phones micro usb socket.Use fine needle to straight them up.I had the same problem and my phone now is fine.
Sent from my GT-I9000 using XDA Premium App
dubo said:
Check for damaged pins in phones micro usb socket.Use fine needle to straight them up.I had the same problem and my phone now is fine.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Thank you so much. That did it for me
You are a genius
Still cant detect. Btw, what lin ur talking bout?
I will bet you.Just look properly in usb micro socket.Took me about 15 minutes to work this out.Czeck if the pins not touching them selfs.
Regards
ADAM
zafrieyl said:
Still cant detect. Btw, what lin ur talking bout?
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA Premium App
omg! solved. thnks

[Q] Pc doesnt recognize s3 mini 4.1.2 rooted

If i connect my phone to my pc with usb cable it says looking for mtp programs.that keeps on going until i unplug it.on my phone it says cant find software.what is the problem?
Also my phone doesnt recieve updates.is there a way to fix?
Baseband XXAMA2 . 4.1.2 This is jelly bean right?
TerenceTP7 said:
If i connect my phone to my pc with usb cable it says looking for mtp programs.that keeps on going until i unplug it.on my phone it says cant find software.what is the problem?
Also my phone doesnt recieve updates.is there a way to fix?
Baseband XXAMA2 . 4.1.2 This is jelly bean right?
Click to expand...
Click to collapse
Yes.
Do you have Kies? If not install it.
Sent from my GT-I8190 using xda app-developers app
If you connect to kies, enable usb debug.
If you connect as mtp or ptp, disable usb debug.
tys0n said:
If you connect to kies, enable usb debug.
If you connect as mtp or ptp, disable usb debug.
Click to expand...
Click to collapse
Doesnt work.usb debug enabled or disabled.it says looking for mtp device
.if thats done it starts over.on my phone it says cant find software.my phone is rooted and pc is running vista.before i had 4.1.1 and that worked fine
ppero196 said:
Yes.
Do you have Kies? If not install it.
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
With kies air i can transfer files.but no folders.is there a other option to do this?
Now i first started kies.plugged phone to usb and it says installing mtp device gti1890 ready for use.pc recognize it so its fixed.i dont get it at all but im ok with it :d
Usb is on
you can download a seperate drivers without installing the whole kies application..you can get it from galaxy y forum..
Sent from my GT-I8190 using xda app-developers app
thanks.it looks working fine now
Now suddenly it says.your device is protected for writing.delete the security.
Hows?? 10min ago i was moving folders from pc to phone.is this because of directory bind?

USB isnt being recognised! HELP!!!

My device doesnt appear on my PC when I connect it and niether does my phone pop up USB debugging menu which it once used. I have no clue what happened to my poor phone. Its running 4.2.2 cm. And it doesnt get recognised by odin either in the download mode. what may have gone wrong?
Do you have force fast charge turned on? If you do simply turn it off.
You have to install usb samsung drivers
Sent from my GT-I9001 using xda premium
Maybe you should check in setting in debugging part check debug mod and USB and unmark over the network
Sent from my GT-I9000 using xda premium
Yes yes
Sent from my GT-I9001 using xda premium
alireza40ir said:
Maybe you should check in setting in debugging part check debug mod and USB and unmark over the network
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
you mean from developer options? I don't get the message in the notification tray "USB connected" where as I used to get it previously. Now it simply charges the device and nothing more
hussam91 said:
you mean from developer options? I don't get the message in the notification tray "USB connected" where as I used to get it previously. Now it simply charges the device and nothing more
Click to expand...
Click to collapse
Yes, from developer option enable debugging mode as pic below
And about Odin don't recognize your phone, you have to download Samsung driver>Restart PC > boot your phone into download mode then plug it to PC it will be recognized.. If you have win8 installed and it still don't recognize your phone then install driver from windows update..
In win7 it install it automatically
Sent from my GT-I9000 using xda app-developers app
I've already got those settings enabled. But My phone doesn't get connected
Usually it gives me notification USB Connected and then I could select it to turn on USB or not. But now it doesn't give me that nitofcation when I connect it even though it still charges my phone. Are there any drivers inside the phone Which may have got corrupted or something?
I've already got those settings enabled. But My phone doesn't get connected
Usually it gives me notification USB Connected and then I could select it to turn on USB or not. But now it doesn't give me that nitofcation when I connect it even though it still charges my phone. Are there any drivers inside the phone Which may have got corrupted or something?
hussam91 said:
I've already got those settings enabled. But My phone doesn't get connected
Usually it gives me notification USB Connected and then I could select it to turn on USB or not. But now it doesn't give me that nitofcation when I connect it even though it still charges my phone. Are there any drivers inside the phone Which may have got corrupted or something?
Click to expand...
Click to collapse
1-I know that you are using semaphore kernel so, Did you enabled fast charge? If yes disable it as shown in pic
2- try to unplug your phone,uncheck debugging and re-enable it again then connect your phone and see
Sent from my GT-I9000 using xda app-developers app
5aaled said:
1-I know that you are using semaphore kernel so, Did you enabled fast charge? If yes disable it as shown in pic
2- try to unplug your phone,uncheck debugging and re-enable it again then connect your phone and see
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Did u install auto memory killer?
Sent from my GT-I9000 using xda premium
alireza40ir said:
Did u install auto memory killer?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
No, its useless and consume ram
Try a new flash... factory reset. Wipe cache format system dir etc to get a clean start.
It worked for me to clear the problem. Just remember to back up apps and data first.... titanium or similar.
Sent from my GT-I9000 using xda app-developers app
Hello Hussam91,
I can think of two things:
First - maybe you didn't see the message in the notification bar? (see attached picture)
(The button in the middle - tap it and allow the USB connection in the next screen).
If this was not the reason - maybe this can help you then:
http://forum.xda-developers.com/showthread.php?t=2144709
I had the problem that I could not connect the phone in myPhoneExplorer via USB. The reason seems to be a new usb security feature.
Make sure you have the latest adb drivers installed, like mentioned in the thread.
I ran "adb devices" from the command line (like mentioned in thread), first the phone was shown offline. Then, a popup was shown on the phone that allowed me to add my computer's fingerprint. After that, everything worked fine.
Greetings!

USB connection problem

Hello guys for some my AHD is having issues with USB mtp connection when I connected it with the cable it came with my Desktop(windows xp professional) froze.
I waited a while until something happen but when i disconnected the AHD, The desktop unfroze as if nothing had happen,
I have also tried with a laptop(windows 7 Ultimate) ,but i had the same problem,
The phone only connects when it is in fastboot, I have also flash back to stock ICS and JB
tried multiple roms and computers
Also tried usb debug on/off and reinstallation of drivers
Can anyone help me im tired of using FTP to transfer my music and files
If any information is needed to fix this just tell me...
xFajitas said:
Hello guys for some my AHD is having issues with USB mtp connection when I connected it with the cable it came with my Desktop(windows xp professional) froze.
I waited a while until something happen but when i disconnected the AHD, The desktop unfroze as if nothing had happen,
I have also tried with a laptop(windows 7 Ultimate) ,but i had the same problem,
The phone only connects when it is in fastboot, I have also flash back to stock ICS and JB
tried multiple roms and computers
Also tried usb debug on/off and reinstallation of drivers
Can anyone help me im tired of using FTP to transfer my music and files
If any information is needed to fix this just tell me...
Click to expand...
Click to collapse
Use win 7, when the phone is connected to computer reboot your phone without unplugging ..
Sent from my MB886 using xda app-developers app
Well laptop doesn't freeze anymore just gets unknown USB device I tried reinstalling from the device manager but no use
But thanks for help...you're a really nice person
Sent from my MB886 using XDA Premium HD app

[Q] {HELP!} MTP not working

Hi mates
I'm running Unofficial CM 11 by wolf. But ever since CM 10.2, I've never been able to connect to Windows PC via MTP.
1. Plugging in phone to pc, lg 4x hd shows charging, but no pop out MTP in device
2. All up to date drivers are installed on my pc
3. My storage path is storage/sdcard0
Could that be the problem?
* When I set it to PTP in device, nothing happens too, just shows its charging
I tried using other Android devices connecting to my pc, it works. Only CM. Is CM the problem?
No usb plug in sound when i plug in lg 4x hd to pc, cable works as i used it with other phones, usb sound plays, recognized in device manager except lg 4x hd, no sound, not recognized in device manager
Could be due to the fact that fast charging is enabled? If so disable it and you should be good to go.
Sent from my LG-P880 using XDA Premium 4 mobile app
Omario-242 said:
Could be due to the fact that fast charging is enabled? If so disable it and you should be good to go.
Sent from my LG-P880 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi! Thx for ur reply. How do I disable fast charging? :cyclops:
westinboy123 said:
Hi! Thx for ur reply. How do I disable fast charging? :cyclops:
Click to expand...
Click to collapse
In trickster mod app if you have it.
I think I know what is your problem, check this: http://www.random-host.com/blog/enable-media-device-mtp-usb-mode-android-44-kitkat
Thx fr ur reply!
LGaljo said:
In trickster mod app if you have it.
I think I know what is your problem, check this: http://www.random-host.com/blog/enable-media-device-mtp-usb-mode-android-44-kitkat
Click to expand...
Click to collapse
Yes, I have selected that too, but it doesn't work!
Plugging in usb to windows charges the phone but windows doesn't show it in device manager! I think phone doesn't recognize being plugged in to windows? (phone problem)
Do u knw if its CM 11 on our device that cause the problem?
westinboy123 said:
Yes, I have selected that too, but it doesn't work!
Plugging in usb to windows charges the phone but windows doesn't show it in device manager! I think phone doesn't recognize being plugged in to windows? (phone problem)
Do u knw if its CM 11 on our device that cause the problem?
Click to expand...
Click to collapse
I don't know, sorry. Have you tried to reinstall drivers or try on another computer with different cable?

Categories

Resources