Database Develop

[Q] why does my galaxy s isnt detected by pc?

before this problem happen, my pc give a notification : usb not recognised. then i tried to fix this problem by removing the usb driver and install it again. after the new driver was installed, my phone cant be detected.when i plugged in the usb to pc, it only charge the phone. the notification of connecting to pc at my galaxy s doesnt show up. ive tried on other pc also. still nothing.
how can i make my galxy s connect back to pc again?
odin did not recognize my phone. when plug to pc, no device connect sound. nothing. the only thing it does is charging my phone.

Connect USB to mainboard usb port .
Install latest Kies .
Reboot phone .
Connect phone with Debugging off .
Connect phone in USB mass storage mode and wait for windows to find drivers and install them .
jje

Hi
I have exactly the same problem. I've tried all the above mentioned suggestions nothing worked for me

Had the same issue, try usb debugging on and then connect to pc or mac
Sent from my GT-I9000 using XDA App

iplaman said:
Had the same issue, try usb debugging on and then connect to pc or mac
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Tried that as well and still not recognized. I'm beginning to this the problem is from the phone itself, cause i've tried it on my PC and Mac and both had the same results (not recognized)
However the phone is working normally, except to this problem

Check for damaged pins in phones micro usb socket.Use fine needle to straight them up.I had the same problem and my phone now is fine.
Sent from my GT-I9000 using XDA Premium App

dubo said:
Check for damaged pins in phones micro usb socket.Use fine needle to straight them up.I had the same problem and my phone now is fine.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Thank you so much. That did it for me
You are a genius

Still cant detect. Btw, what lin ur talking bout?

I will bet you.Just look properly in usb micro socket.Took me about 15 minutes to work this out.Czeck if the pins not touching them selfs.
Regards
ADAM
zafrieyl said:
Still cant detect. Btw, what lin ur talking bout?
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA Premium App

omg! solved. thnks

[Q] Usb debuging not connected on cm7.1?

When I connect my nook color to pc, nook shows that usb debuging is conected now, but on my pc neither the hardware manager shows something like android device nor other app detect this.
And when I manually unselect the usb debuging and reselect,it just shift to the usb mass storage page.I dont know why.
I am running the newest cm7.1 RC1
Sorry for my bad English, Please help!!Thanks!!

I have spent a long time trying to get the USB connection to work with adb with no success. In the end I just installed adbWireless from the market. It works flawlessly...
Sent from my CM7 Nook using XDA Premium App

Maybe that's a good solution.I wonder whether it is a bug?

iamjesse said:
I wonder whether it is a bug?
Click to expand...
Click to collapse
I don't know. Has anybody managed to connect their CM7 Nook to adb via USB?
Sent from my Nook using XDA Premium App

I had to reboot the computer with the device connected

Mobile Not connecting To My Pc

GuyZ M NEW TO THIS FORM ND NEED UR HELP,ALL OF A SUDDEN MY MOBILE STOPED AND WHEN I REBOTED IT AND CONNECTED TO MY PC IT QAS NOT SHOWING.NO MTP NO FTP WHATEVER IT IS SAID.... NEITHER ON KIES.TRIED ON DIFFERENT SYSTEM ,REBOOTED TWICE BUT STILL NOTHING.
PLEASE HELP ME .

Is it charging via usb?

nokiamodeln91 said:
Is it charging via usb?
Click to expand...
Click to collapse
+1 and check with any other usb port..!
Sent from my GT-N7000 using Tapatalk 2

nokiamodeln91 said:
Is it charging via usb?
Click to expand...
Click to collapse
yes my friend it is.

are you rooted? if yes then you could try installing the rom again using mobile odin.. and see if that helps

Try this,
Boot into recovery, connect the phone & let it install the required drivers.
Boot into Download mode & again let windows install required drivers.
Boot normally & again let it install whatever things that are required to run things
& you are thru. Hope this helps.

ksrulz said:
GuyZ M NEW TO THIS FORM ND NEED UR HELP,ALL OF A SUDDEN MY MOBILE STOPED AND WHEN I REBOTED IT AND CONNECTED TO MY PC IT QAS NOT SHOWING.NO MTP NO FTP WHATEVER IT IS SAID.... NEITHER ON KIES.TRIED ON DIFFERENT SYSTEM ,REBOOTED TWICE BUT STILL NOTHING.
PLEASE HELP ME .
Click to expand...
Click to collapse
Hello, bit of a newbie myself but I may be of help. A couple of questions- has it worked before, and if so, when? Secondly, prior to it stopping working (that is, if it did), did you install any new software on your phone or computer that may have affected the setup?

its not rooted.nd still m nt able to connect to any pc.

ksrulz said:
its not rooted.nd still m nt able to connect to any pc.
Click to expand...
Click to collapse
Sounds like a USB driver issue. Do you have kies installed, or the stock usb drivers installed? Mine can be a bit flakey when connecting with USB though.

Actually sounds like something that happened to me. After upgrading kies my usb drivers got updated to but my pc showed missing id whenever my note got connected. Only solution i found is to reinstall the usb drivers, disconect the pc from internet and then connect the note. After drivers are installed i can connect to the internet again. Shoud i connect the note while connected to internet gives me the missing hardware id again and makes me install drivers again. Hope this helps you.

Guyz thank you Very Much ... But A Small dust Particle Over The USB Wire Was creating the Problem. M Sorry and Thank You Guyz <3
********************************
Forum Closed \m/ Respect XDA Developers

USB isnt being recognised! HELP!!!

My device doesnt appear on my PC when I connect it and niether does my phone pop up USB debugging menu which it once used. I have no clue what happened to my poor phone. Its running 4.2.2 cm. And it doesnt get recognised by odin either in the download mode. what may have gone wrong?

Do you have force fast charge turned on? If you do simply turn it off.

You have to install usb samsung drivers
Sent from my GT-I9001 using xda premium

Maybe you should check in setting in debugging part check debug mod and USB and unmark over the network
Sent from my GT-I9000 using xda premium

Yes yes
Sent from my GT-I9001 using xda premium

alireza40ir said:
Maybe you should check in setting in debugging part check debug mod and USB and unmark over the network
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
you mean from developer options? I don't get the message in the notification tray "USB connected" where as I used to get it previously. Now it simply charges the device and nothing more

hussam91 said:
you mean from developer options? I don't get the message in the notification tray "USB connected" where as I used to get it previously. Now it simply charges the device and nothing more
Click to expand...
Click to collapse
Yes, from developer option enable debugging mode as pic below
And about Odin don't recognize your phone, you have to download Samsung driver>Restart PC > boot your phone into download mode then plug it to PC it will be recognized.. If you have win8 installed and it still don't recognize your phone then install driver from windows update..
In win7 it install it automatically
Sent from my GT-I9000 using xda app-developers app

I've already got those settings enabled. But My phone doesn't get connected
Usually it gives me notification USB Connected and then I could select it to turn on USB or not. But now it doesn't give me that nitofcation when I connect it even though it still charges my phone. Are there any drivers inside the phone Which may have got corrupted or something?

I've already got those settings enabled. But My phone doesn't get connected
Usually it gives me notification USB Connected and then I could select it to turn on USB or not. But now it doesn't give me that nitofcation when I connect it even though it still charges my phone. Are there any drivers inside the phone Which may have got corrupted or something?

hussam91 said:
I've already got those settings enabled. But My phone doesn't get connected
Usually it gives me notification USB Connected and then I could select it to turn on USB or not. But now it doesn't give me that nitofcation when I connect it even though it still charges my phone. Are there any drivers inside the phone Which may have got corrupted or something?
Click to expand...
Click to collapse
1-I know that you are using semaphore kernel so, Did you enabled fast charge? If yes disable it as shown in pic
2- try to unplug your phone,uncheck debugging and re-enable it again then connect your phone and see
Sent from my GT-I9000 using xda app-developers app

5aaled said:
1-I know that you are using semaphore kernel so, Did you enabled fast charge? If yes disable it as shown in pic
2- try to unplug your phone,uncheck debugging and re-enable it again then connect your phone and see
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Did u install auto memory killer?
Sent from my GT-I9000 using xda premium

alireza40ir said:
Did u install auto memory killer?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
No, its useless and consume ram

Try a new flash... factory reset. Wipe cache format system dir etc to get a clean start.
It worked for me to clear the problem. Just remember to back up apps and data first.... titanium or similar.
Sent from my GT-I9000 using xda app-developers app

Hello Hussam91,
I can think of two things:
First - maybe you didn't see the message in the notification bar? (see attached picture)
(The button in the middle - tap it and allow the USB connection in the next screen).
If this was not the reason - maybe this can help you then:
http://forum.xda-developers.com/showthread.php?t=2144709
I had the problem that I could not connect the phone in myPhoneExplorer via USB. The reason seems to be a new usb security feature.
Make sure you have the latest adb drivers installed, like mentioned in the thread.
I ran "adb devices" from the command line (like mentioned in thread), first the phone was shown offline. Then, a popup was shown on the phone that allowed me to add my computer's fingerprint. After that, everything worked fine.
Greetings!

[Q] Can't read Atrix HD on my computer after flashing PACman ROM

Hi guys. I just installed PACman ROM latest version on my previously stock Atrix HD. Now, I can't read my Atrix HD on my computer. I already installed motorola device manager and still can't read. Is there a driver that I need to install? Thanks

tanos0415 said:
Hi guys. I just installed PACman ROM latest version on my previously stock Atrix HD. Now, I can't read my Atrix HD on my computer. I already installed motorola device manager and still can't read. Is there a driver that I need to install? Thanks
Click to expand...
Click to collapse
Because developer mode isn't enable,
Setting --->About Phone--->hit build number 7 times.
Settings -->Developer options--->Android Debugging
rock on.

tanos0415 said:
Hi guys. I just installed PACman ROM latest version on my previously stock Atrix HD. Now, I can't read my Atrix HD on my computer. I already installed motorola device manager and still can't read. Is there a driver that I need to install? Thanks
Click to expand...
Click to collapse
Turn on USB debugging, while connecting your device to system, reboot it without disconnecting. Also if it prompt for RSA key access check always allow this computer and accept it....
Sent from my MB886 using xda app-developers app

No dice
Tried your suggestions, guys. But its still not working.
I tried the 7 clicks. It showed that I have developer access. Then I turned on USB debugging and restarted the phone. No notification about USB debugging, my computer still doesn't detect it.

tanos0415 said:
Tried your suggestions, guys. But its still not working.
I tried the 7 clicks. It showed that I have developer access. Then I turned on USB debugging and restarted the phone. No notification about USB debugging, my computer still doesn't detect it.
Click to expand...
Click to collapse
No adb/debgging is normal on the custom roms. Haven't had adb in at least 2 weeks.

skeevydude said:
No adb/debgging is normal on the custom roms. Haven't had adb in at least 2 weeks.
Click to expand...
Click to collapse
Too bad. Does that mean that I can't use MTP mode?

tanos0415 said:
Too bad. Does that mean that I can't use MTP mode?
Click to expand...
Click to collapse
Can you give details as to what computer/os you are running?
Does it charges when you plug the phone into the computer?
With or without developer mode enabled, your computer should still respond to the phone. If it doesn't then the problem is the computer.

hungrymr2 said:
Can you give details as to what computer/os you are running?
Does it charges when you plug the phone into the computer?
With or without developer mode enabled, your computer should still respond to the phone. If it doesn't then the problem is the computer.
Click to expand...
Click to collapse
Yeah its charging. Drivers tried installing but it says that it was not successfully installed. It also shows as unknown device.
I'm running Windows 7 64bit. It can detect fine back when it was stock. The problem only showed up after I installed PAC rom

The drivers can be corrupted for no good reason try deleting and re-installing.

tanos0415 said:
Too bad. Does that mean that I can't use MTP mode?
Click to expand...
Click to collapse
Can't use MTP or Camera mode (at least on my linux box I can't). All I know is adb doesn't work and that's the only reason I have to plug into usb...I unmount my sd and plug it into my PC to do file transfers (or adb push from recovery)...adb does work in recovery, just not the system.
tanos0415 said:
Yeah its charging. Drivers tried installing but it says that it was not successfully installed. It also shows as unknown device.
I'm running Windows 7 64bit. It can detect fine back when it was stock. The problem only showed up after I installed PAC rom
Click to expand...
Click to collapse
Same things happen on my linux box...problem showed up the same time for me as well....installed a 4.2.2 rom...
//this is a known issue....related to the kernel and usb drivers (started about three weeks ago) Use an earlier, first week of June or so, kernel if you need adb/usb...thought I don't recommend doing that.

frog1982 said:
The drivers can be corrupted for no good reason try deleting and re-installing.
Click to expand...
Click to collapse
+1 try to delete them in safemode to ensure that the old drivers are gone for good.
I did try PAC once and it connected to my win 7 64bit without any issues.
Sent from my MB886 using xda app-developers app

tanos0415 said:
Hi guys. I just installed PACman ROM latest version on my previously stock Atrix HD. Now, I can't read my Atrix HD on my computer. I already installed motorola device manager and still can't read. Is there a driver that I need to install? Thanks
Click to expand...
Click to collapse
I had this problem.
Step 1: Enter system Settings>Developer options.
Step 2: Tick "Android debugging", "USB debugging notify" (makes it easier to know if connection is successful), and change the "Root acess" setting to "Apps and ADB".
Step 3: Reboot Phone and connect to computer.
This is what I did and I haven't had a problem since. Hope this helps

Blackest Pain said:
I had this problem.
Step 1: Enter system Settings>Developer options.
Step 2: Tick "Android debugging", "USB debugging notify" (makes it easier to know if connection is successful), and change the "Root acess" setting to "Apps and ADB".
Step 3: Reboot Phone and connect to computer.
This is what I did and I haven't had a problem since. Hope this helps
Click to expand...
Click to collapse
already tried that. thanks anyway. :good:

Did you do all that And the restart the computer itself? I think I read that on another android forum (android central maybe?) That that helps sometimes...
Sent from my PACman Atrix HD using XDA Premium