Related
Anyone have success with this? Game graphics look srunning before it fcs.
Nobody?
installed, downloaded the sd data, unchecked compatibility mode in spare parts, rebooted.
campaign finished
Thanks, but that didn't work. Must be a kernel issue.
Close to 300 views. I must not be the only one.
Anyone got anything on this?
Works fine for me. Although I'm running totally stock Xoom.
OC GPU Kernel?
Are you using the Tiamat kernel with the overclocked GPU? I noticed that on the OC GPU kernel, GOF2 crashed every few minutes. I switched to the standard kernel (still the latest 1.7Ghz Tiamat kernel, just not the OC GPU), and I haven't crashed since. I think I had a similar issue with Riptide GP and the OC GPU kernel, but the standard Tiamat kernel runs great and doesn't crash at all (at least on my Xoom).
I am running GOF2 on a stock Euro 3.1 and I have the same FC issues...
Sent from my MZ601 using Tapatalk
Okay here's the thing,
my last most stable ROM I was running on was CacingKalung's MIUI. And that had a wakelock issue too. I'm pretty sick of it, so I decided to try Edowar's CM7 and maybe even Bumblebee rom.
when I flashed to Edo's CM7, all was good, no wakelocks, apn thing I had it fixed by using yashwant's APN fix.. until I ran Temple Run. The frames were skipping really bad, in the store part the Back button couldnt even been seen until scrolled up. The vines kept disappearing, and the gameplay was even worse, laggy. Mind you I updated the game already.
I never had this issue when I was on 2.6.32.9. So tell me, with me switching back to .6.32.9 now, what do I have to lose? Please share your thoughts and opinion!
PS: Thinking of going back to Maclite rom, least it's stable.
Bro its too early to comment on difference between these two kernel.
for .32.9 kernel various custom kernel are available while for .35.7 only TJ's custom version is available and I think it need more support from kernel developer.
till now if we think for .32.9 kernel, mOCk is best for gamer.
I have found that the best gaming combo is maclite with bumblebee kernel for mortals(non devs like me) and newer gpu drivers as far as benchmarks go. It also gives a superfast rom. What I have found so far is that eventhough there is a scarcity of custom kernels for .35 the situation will not improve any better than the performance of tj with a score of 27.9. I have already achieved 27.7 at 1.4 GHz with the. 32 kernel and 27.2 with stock speed in nenamark 2.2. Still this is just my opinion and it is very likely that your device may hit tjs score.
Sent from my MacLite-FB0 using XDA
Between .35 and .32... seem that .35 hasn't been hacked with wakelock trick while wifi is on. This hack is needed to prevent our device to meet Sleep of Death when it goes to sleep while wifi is on.
Sent from my CSL-MI410 @CKMIUI 2.4.13 using Tapatalk
CacingKalung said:
Between .35 and .32... seem that .35 hasn't been hacked with wakelock trick while wifi is on. This hack is needed to prevent our device to meet Sleep of Death when it goes to sleep while wifi is on.
Sent from my CSL-MI410 @CKMIUI 2.4.13 using Tapatalk
Click to expand...
Click to collapse
oh i thought the SoD had nothing to do with kernel.. lol well thank God im back to. 32..
am still getting pretty bad wakelocks every now and then x.x
but honestly i tried STOCK sharp rom to play temple run and even on that the frames were choppy, graphics n sum sprites were missing. ugh.
anyone with good batt life on either roms can u guys share your rom,kernel n config? my phone lasts about 8-10 hrs a day only if heavily used non stop.
cheezzzz said:
Okay here's the thing,
my last most stable ROM I was running on was CacingKalung's MIUI. And that had a wakelock issue too. I'm pretty sick of it, so I decided to try Edowar's CM7 and maybe even Bumblebee rom.
when I flashed to Edo's CM7, all was good, no wakelocks, apn thing I had it fixed by using yashwant's APN fix.. until I ran Temple Run. The frames were skipping really bad, in the store part the Back button couldnt even been seen until scrolled up. The vines kept disappearing, and the gameplay was even worse, laggy. Mind you I updated the game already.
I never had this issue when I was on 2.6.32.9. So tell me, with me switching back to .6.32.9 now, what do I have to lose? Please share your thoughts and opinion!
PS: Thinking of going back to Maclite rom, least it's stable.
Click to expand...
Click to collapse
I'm on latest edowar's CM7, got lag issue when playing Temple run on 35.7 kernel, but then after I set the I/O governer to Deadline, and CPU gorvener to smartassv2 or interactive X, it seems better.
From my experience with this rom, the gpu lib is not very good to play HD games (got so much lag when playing Asphalt 6, but not dungeon defender 3), or very much like fast moving graphic game like temple run. I've test to install the older gpu lib from 32.9 kernel (just the gpu lib, not the kernel itself), it gave me back low nenamark2 value, but the lag is gone like 32.9 kernel cm7, however, it seems making the fast locking gps not to be that fast anymore (wonder why, still need to play2 around again).
About the wifi, it really piss me off as it will brings the phone to sleep of death each time it goes to sleep although I set the wifi sleep policy to 'never'. however, the workaround would be to install Advanced Wifi Lock from the market for now.
Originally Posted by CacingKalung
Between .35 and .32... seem that .35 hasn't been hacked with wakelock trick while wifi is on. This hack is needed to prevent our device to meet Sleep of Death when it goes to sleep while wifi is on.
Sent from my CSL-MI410 @CKMIUI 2.4.13 using Tapatalk
Click to expand...
Click to collapse
oh i thought the SoD had nothing to do with kernel.. lol well thank God im back to. 32..
am still getting pretty bad wakelocks every now and then x.x
Click to expand...
Click to collapse
Because of the wakelock hack, when wifi is on, our device will never go to sleep. So it's very recomended to turn on wifi only when we need it and turn off if we've done. so our device will able to enter sleep mode when in idle to save power.
Sent from my CSL-MI410 @CKMIUI 2.4.13 using Tapatalk
CacingKalung said:
Because of the wakelock hack, when wifi is on, our device will never go to sleep. So it's very recomended to turn on wifi only when we need it and turn off if we've done. so our device will able to enter sleep mode when in idle to save power.
Sent from my CSL-MI410 @CKMIUI 2.4.13 using Tapatalk
Click to expand...
Click to collapse
CK bro, Mokee v0.3 still has the SOD issue though it uses mock kernel(0.32). Any ideas on how to fix this?
whyzee said:
CK bro, Mokee v0.3 still has the SOD issue though it uses mock kernel(0.32). Any ideas on how to fix this?
Click to expand...
Click to collapse
Are you sure? While wifi was on?
As far as I know, mOCk and SD and also last TJ's miui kernel have been patched with wakelock if wifi is on.
Or maybe you can use wifi library and driver from miui just to make sure.
If still remain then I don't have an idea for that problem.
Sent from my CSL-MI410 @CKMIUI 2.4.13 using Tapatalk
thanks for the info bro. I am certain that it happened. I'll try again and see.
EDIT
I can't replicate the problem. Though the lockscreen turns on, I'm able to get back without any problems. So I think may be its gone now. thanks anyway.....
UPDATE
fixed sod after using different wifi lib files
natsuke said:
I'm on latest edowar's CM7, got lag issue when playing Temple run on 35.7 kernel, but then after I set the I/O governer to Deadline, and CPU gorvener to smartassv2 or interactive X, it seems better.
From my experience with this rom, the gpu lib is not very good to play HD games (got so much lag when playing Asphalt 6, but not dungeon defender 3), or very much like fast moving graphic game like temple run. I've test to install the older gpu lib from 32.9 kernel (just the gpu lib, not the kernel itself), it gave me back low nenamark2 value, but the lag is gone like 32.9 kernel cm7, however, it seems making the fast locking gps not to be that fast anymore (wonder why, still need to play2 around again).
About the wifi, it really piss me off as it will brings the phone to sleep of death each time it goes to sleep although I set the wifi sleep policy to 'never'. however, the workaround would be to install Advanced Wifi Lock from the market for now.
Click to expand...
Click to collapse
finally someone else who feels the same wayabout the gpu lib!
thanks for the wifi suggestion bro!
I've just updated to Trinity v 5.0, but my phone keeps rebooting itself after scrolling the homescreens. I flashed the 1 GHz script and changed the Kernel to Unity v10, now it's back to normal again without reboots.
Does anyone know why this is happening? No one else on Trinity's thread seems to have this problem...
Your CPU cannot handle anything more than 1GHz. That's probably the thing that caused the reboot.
Not all CPU can handle >1GHz due to the nature of the manufacturing process of the CPU, so you are a bit unlucky to get the CPU that can only run 1 GHz max, still its still satisfy what it says on the spec..
wpra3 said:
Your CPU cannot handle anything more than 1GHz. That's probably the thing that caused the reboot.
Not all CPU can handle >1GHz due to the nature of the manufacturing process of the CPU, so you are a bit unlucky to get the CPU that can only run 1 GHz max, still its still satisfy what it says on the spec..
Click to expand...
Click to collapse
Thanks, that's what I thought. But it's only after I flashed the Unity v10 kernel then it would stop rebooting. Is it because the Ruslik kernel that comes with it is custom made for OC? Should I go to Tweaks now and remove OC Daemon then?
I think the Ruslik kernel comes with OC, therefore it reboots every time, just try to make it to 1GHz it should work, if not its probably kernel bug. And you don't have to remove the OC daemon after, just set it to 1GHz and you are good to go.
In TriNiTy SensationXL 4.5 i have a reboot bug in FBReader. If i won't touch the screen for some time the phone will reboot. And in 5.0 final version i have force close in FIFA 12. Anyone else has this problem?
hello all
i would like to discuss about bugs in roms + kernels that you use or have used, so we can easily choose the one we like/need/choose
so far i have tried:
1. CM9 + Nova HD 1.1.0
- couldn't get over the fact of non working camera and video acceleration
2. CM 7.2.0 stable + default kernel
- main problem was random network loos and bricking over night while charging...
- any other CM7 nightly or stable rom + any kernel haven't solved those 2 problems...
3. DjangoManouche 1.2.1 + Harsh kernel
- when starting Wifi hotspot, it reports error
My current setup:
ROM: DjangoManouche 1.2.1
Kernel: guestekrnL-v1.8.1-HighOC-BestBattery
ICS Transformation Pack
been using my current setup for 7 days now, no bugs detected yet...
What about you, your setup and bugs you've noticet in time...please write here...
The latest Temasek CM7 build along with his kernel. Currently I'm using the Etana Kernel without OC though. Works fine too.
Sent from my Optimus 2X using xda premium
ALL CM9 ROMS - after flash - smooth and fast, after few days of using slow as hell
I am using WIUI 2.3.7 for 10 days now. It's so bugless and stable and responsive that it's boring to use after I've set it up to my liking. It just works and it's so battery friendly. Three days phone usage with music playing like 1 hour a day and talking for like 15-20 minutes. Oh and yeah, data is OFF only during night. It's the best ROM I've used. Ever.
cm7
Cm7 kang 121 or what ever i think tesmaks kernel had a other but was to compliqated but now i still nit happy because for driver with any over clock app i only have power save or perfemance, but i like ondemand but yeah so
Same ass you cm7 phone off after charge at night need pull out battery and put it back in to restart phone..... ow and i have a sd bug
Some times the phone doesnt see my 16 gb sd card but keeps looking for it, so the sd card slot is over heating but realy hot like to hot to touch so yeah.
Somw bugs but yeah wait for cm9 i mean full ics and then cm9
But battery is okay i have baseband 725v10(something) and rill same and is realy good and i think powersave helps to but voila.
My setup
I am using
ROM CM7.20120701 with
Kernel CM7 ETaNa_LOC_DS
overclocked to 1216 MHz
only issue so far is the dock dissapears once in a while and i have to reset ADW EX. then it comes back... other than that its an amazing setup and kernel...BIG thanks goes to the developers :good:
1. Temasek Build 130
- best ROM without any BSOD problem im using temasek rom stock kernel
- no leakage of ram after 60hrs up time
- BUGS: i dont konw if its bug but the widget of application that i installed is not shown in widget selections
2. Paranoidandroid
- super smooth perfect font size but the ram is too low as i remember its around 140-200mb newly flash
3. chuck norris
- great rom but after a few minutes it have BSOD i test it by locking and unlocking my phone quickly in temasek rom i do that also never experienced it when im using stock cm7 kernel
- low ram because of the go launcher it have a lot go launcher processes
4. MIUI
- iphone experience very smooth but same thing as chuck norris lot of background process because of the go launcher
heavencanwait said:
I am using WIUI 2.3.7 for 10 days now. It's so bugless and stable and responsive that it's boring to use after I've set it up to my liking. It just works and it's so battery friendly. Three days phone usage with music playing like 1 hour a day and talking for like 15-20 minutes. Oh and yeah, data is OFF only during night. It's the best ROM I've used. Ever.
Click to expand...
Click to collapse
can you send me a link to this rom and kernel...i can't find it anywhere for download...
Temasek kang 130 with etana_loc kernel..
Very smooth but noticed experienced twice after using ums, the phone freezes and needs to pull out battery, overall outstanding...:good:
---------- Post added at 08:38 PM ---------- Previous post was at 08:36 PM ----------
Using Holo laucher and locker to give it ics/jb feel while waiting for official cm9/cm10 hopefully.
skymario84 said:
can you send me a link to this rom and kernel...i can't find it anywhere for download...
Click to expand...
Click to collapse
You can find it in optimus 2x android development section
Sent by grimmyrippy using xda premium
Tried many, including owen's cm9 and temasek's cm7. Problem is they all end up being sticky as syrup unless you do a factory reset every fortnight or even more frequently. So for me, the best solution is stock LG ROM with stock kernel, rooted. I still need to do the resets, but I am experiencing fewer bugs. I still appreciate all the hard work from all of you developers, though.
Temasek 135 on v20q(italy) BB : gps drains battery
Hi all,
my first post on XDA, hope it helps.
Temasek 135 on v20q(italy) BB
Phone sold (and bought) in Italy.
LG original USB Charger
LG original included Battery
(LG FL-53HN 1500mAh)
Battery age: about 1 year
OPERATOR : WIND Italia
initial ROM : Stock V20Q (italian original ROM)
phone rooted, CWM installed
installed TEMASEK 135 (all default : ril 0218, Temasek135 kernel)
installed gapps
installed Google maps 6.11.1
CPU : Default (frequency range : 216/1000)
TESTING :
Short version : everything ok, except
- battery drain with gps/wifi localization
- volume keys sometimes don't wake up phone.
Long version:
OVERALL STABILITY : OK
1) RADIO HW:
1a) 2G : ok ; 2G/3G : ok
1b) WIRELESS
-Wireless client : seems ok
-AP(hotspot): no encryption : ok ; encrypted : ??
1c) GPS : may fail to fix. Solution: start gps and reboot phone.
(this appears to be a generic android gingerbread problem)
1d) Bluetooth : still to be tested.
2)TEGRA2 HW Acc
2a) GAME : GUERRILLA BOB THD v1.0 : 1hr of continuous playing, OK.
2b) VIDEO RECORDING (internal memory; temasek135's stock camcorder): ok
2c) VIDEO PLAYING
MXplayer + "codec armv7" (optimized for tegra2) : seems ok
3) UI/SYSTEM APPS
Volume keys to wake phone : faulty
4) BATTERY
phone had battery problems:
-reduced cpu mhz range to 216-500 : didn't help
-lowered display light, didn't help
- locked to 2G, helped a bit
- stopped localization : (close GPS AND wifi localization) : PROBLEM SOLVED
so, it seems that google maps 6.11.1 + gps AND/OR WIFI location is a problem.
Eagles blood ics build 4 seems to be great working camera video and pretty much everything else.
Sent from my LG-P990 using xda app-developers app
This thread is very close to a what is the best ROM/Kernel thread, I'm very happy to leave this thread as it is, providing that no one starts trolling ROMs or Kernels.
Thanks
Sent from my HTC Desire using xda premium
s.d.oconnor said:
This thread is very close to a what is the best ROM/Kernel thread, I'm very happy to leave this thread as it is, providing that no one starts trolling ROMs or Kernels.
Thanks
Sent from my HTC Desire using xda premium
Click to expand...
Click to collapse
New Sheriff in town?
with NOVAHD i had a strange bug... i kept loosing the networkkk over and over...
paranoid android is the best ICS rom so far! with only cm9 native bugs cause of drivers and etcetera.... =)
Hi guys, I've tried some roms and here are my experiences:
Gueste2X v3.6 Hybrid Revolution: Really smooth rom, had to remove the battery when I charged at nights and when the phone wake up the airplane mode was on
ParanoidAndroid [Build 10]: Smoothest ICS rom I've tried, had problem losing the network, only a reinstalling I could fixed the issue and stability issues.
DjangoManouche 1.5 RCQ 4 SpicaKernel : Stable rom, it's not the smoothest but does the job, no random FC or bsod issues. It's the rom I've always returned.
MIUI v2.3.7f: Had some issues with it, performace related and some bsod when charged at nights.
WIUI 2.5.25: Nice rom but for me Django's performace was better.
Nova HD Rebuild v1.1.0: Good at the first days but then went all laggy and lot's of FC.
Eagles Blood: good rom but had a problem where my battery stats disappeared and the only way to fix it was reinstalling.
Hope it helps. Sorry for my bad english.
dante501 said:
Eagles blood ics build 4 seems to be great working camera video and pretty much everything else.
Click to expand...
Click to collapse
Are you sure? Because the usually, the CM9 roms have working camera app, when you switch to video you still have running picture, but then you hit the button to record, the app goes FC.
Ola amigos !!!
Its nice to have everyones opinions ! Pritty easy to find out whats the best rom currently out!
So here is my short report!
ROM - MokeeOS -v1.10.436-V2 for O2X
Im using this rom for about 7 days (1week) and the complete rom is perfect. The 1 and only reason Im hitting an other one is becouse Mokees port is getting every single night a BSOD! Oh, Im sorry, and when you make a longer call, about 10 mins or more, It just freezes. Wont let you back into it. Just black screen and you can talk onwards.
Pritty sad about that point but what can we do hopefully the devs are gonna fix it !
draugurio said:
Hi guys, I've tried some roms and here are my experiences:
Gueste2X v3.6 Hybrid Revolution: Really smooth rom, had to remove the battery when I charged at nights and when the phone wake up the airplane mode was on
ParanoidAndroid [Build 10]: Smoothest ICS rom I've tried, had problem losing the network, only a reinstalling I could fixed the issue and stability issues.
DjangoManouche 1.5 RCQ 4 SpicaKernel : Stable rom, it's not the smoothest but does the job, no random FC or bsod issues. It's the rom I've always returned.
MIUI v2.3.7f: Had some issues with it, performace related and some bsod when charged at nights.
WIUI 2.5.25: Nice rom but for me Django's performace was better.
Nova HD Rebuild v1.1.0: Good at the first days but then went all laggy and lot's of FC.
Eagles Blood: good rom but had a problem where my battery stats disappeared and the only way to fix it was reinstalling.
Hope it helps. Sorry for my bad english.
Click to expand...
Click to collapse
I tested Nova HD Rebuild v.1.1.0: At first it got my approval. But after a while it got laggy. So I share your experience.
After that ParanoidAndroid now on build 11: Great rom. I had no problems losing network. Even battery life ist good. I got stuck on it so I can recommend it.
Hello guys, how are you?
I would like to ask if you also have the same "problem" with your nexus 6. First of all, I come from an OnePlus One which was very smooth . I used to run CM + Franco Kernel but even stock CM (11 or 12) run nicely on it.
Now I'm using a Nexus 6 with the stock rom and the latest version of franco kernel (r26) but, for example, when I swipe the multitasking windows, I can see clearly a lag especially with the last one. Scrolling up and down is also laggy sometimes. Are you experiencing the same? I am running without the encryption and I already tried to disable Fsync; the launcher is the Google one.
Do you have any other sugestions?
Regards,
Rafael
I had this issue on Franco kernel. I went back to stock and the lags went away and battery life almost doubled
I have small lags here and there (sometimes seconds long freezes) but that's mostly due to me messing with kernel settings, trying out custom kernels and nightly ROM builds.
where you able to find out what was causing the lag and how to fx it? im having the same issue.
angourakis said:
Hello guys, how are you?
I would like to ask if you also have the same "problem" with your nexus 6. First of all, I come from an OnePlus One which was very smooth . I used to run CM + Franco Kernel but even stock CM (11 or 12) run nicely on it.
Now I'm using a Nexus 6 with the stock rom and the latest version of franco kernel (r26) but, for example, when I swipe the multitasking windows, I can see clearly a lag especially with the last one. Scrolling up and down is also laggy sometimes. Are you experiencing the same? I am running without the encryption and I already tried to disable Fsync; the launcher is the Google one.
Do you have any other sugestions?
Regards,
Rafael
Click to expand...
Click to collapse
phyba said:
I had this issue on Franco kernel. I went back to stock and the lags went away and battery life almost doubled
Click to expand...
Click to collapse
brando56894 said:
I have small lags here and there (sometimes seconds long freezes) but that's mostly due to me messing with kernel settings, trying out custom kernels and nightly ROM builds.
Click to expand...
Click to collapse
aniel300 said:
where you able to find out what was causing the lag and how to fx it? im having the same issue.
Click to expand...
Click to collapse
@ ALL who have this problem:
i had it too, and i was thinking that i have been the only one..went crazy because i didnt find the reason for this.
Solution:
1) You need the paid version of FKU
2) Open FKU, go into "CPU Manager"
3) Go into Governor Control
4) click on "input_boost_duration"
5) Change the value to: 1000000
6) Turn the button on for set on boot (so this value will be saved and applys again after a reboot)
7) then reboot the device, and voila
explanation:
on the stock kernel there is following setting:
if you touch the display, the Cpu will stay at 1497 Mhz for 3 Seconds and thats the reason why stock is smooth!
Franco changed this value for saving battery. his standard value is 0.04 Seconds on 1497 MHz, then it goes down to 300 if the cpu dont has to handle something.
So for example: if you scroll in the settings, and the CPU frequency goes so quickly down (after the 0.04 secs) there will be stutters
and with the 7 steps i mentioned above, you change the boost duration to 1 second. This means the device will not lag, because the CPU stays for 1 sec on 1497 Mhz and the battery impact isnt that big!
Please try this out and respond to me if it helped
aniel300 said:
where you able to find out what was causing the lag and how to fx it? im having the same issue.
Click to expand...
Click to collapse
Turns out, most of my problems were caused by the "Deep Darkness" CM theme. Builds of BlissPop and BenzoROM would be fine for a little while and then start to screw up, getting pissed off I would boot into CleanROM which didn't have any themes applied (I use MultiROM) and everything would work as expected for hours, no lags at all! I decided to switch to another theme in BlissPop to test my theory and voila no more lag!
GregNexus said:
@ ALL who have this problem:
i had it too, and i was thinking that i have been the only one..went crazy because i didnt find the reason for this.
Solution:
1) You need the paid version of FKU
2) Open FKU, go into "CPU Manager"
3) Go into Governor Control
4) click on "input_boost_duration"
5) Change the value to: 1000000
6) Turn the button on for set on boot (so this value will be saved and applys again after a reboot)
7) then reboot the device, and voila
explanation:
on the stock kernel there is following setting:
if you touch the display, the Cpu will stay at 1497 Mhz for 3 Seconds and thats the reason why stock is smooth!
Franco changed this value for saving battery. his standard value is 0.04 Seconds on 1497 MHz, then it goes down to 300 if the cpu dont has to handle something.
So for example: if you scroll in the settings, and the CPU frequency goes so quickly down (after the 0.04 secs) there will be stutters
and with the 7 steps i mentioned above, you change the boost duration to 1 second. This means the device will not lag, because the CPU stays for 1 sec on 1497 Mhz and the battery impact isnt that big!
Please try this out and respond to me if it helped
Click to expand...
Click to collapse
BEEN SEARCHING FOR A SOLUTION TO THIS FOR DAYS NOW AND THIS WORKED! THANKS! :good: