Database Develop

[q] galaxy s tweak app froze my phone

my phone has been frozen at the samsung i9000 screen ever since opening this app.... i am very new to this do not understand most concepts here.. ie. flashing a rom. If anyone can help me get my phone out of this state or has any suggestions on how i should fix this please comment.

if you can get into recovery mode try flasing another rom via cwm or flash it using odin and download mode (flashing non wipe roms via cwm might leave your apps and data intact)

What is the full name of the app? How did you try using it? Do you know what firmware version your phone is on?
First thing to try is turn off, remove battery sim and any microSD. leave five minutes and put all back in and turn on.

krtken said:
if you can get into recovery mode try flasing another rom via cwm or flash it using odin and download mode (flashing non wipe roms via cwm might leave your apps and data intact)
Click to expand...
Click to collapse
i can get in recpvery and download mode but have no clue really how to flash a rom.. i have odin and a few otehr files but i cannot get this back to normal.

Tehpriest said:
What is the full name of the app? How did you try using it? Do you know what firmware version your phone is on?
First thing to try is turn off, remove battery sim and any microSD. leave five minutes and put all back in and turn on.
Click to expand...
Click to collapse
the app is galaxy s tweaks or something very simalar (black and white logo) the two options i was given in the app were "YES-BREAAAAK my phone" and "NO- Im not crazy" i selected no and then my phone just reset and wouldnt turn on again ive tried everything i can do without hooking up to a comp ( as far as i know) but thx for the advice

Where did you get this from? It does not seem to be in the market.

OK just found it. Have a read off all the comments. Not good.
http://www.appbrain.com/app/gst-(galaxy-s-tweaker)/com.pommedeterresautee.lagfix
You could try restart holding Home Vol up and Power button then choose Clear cache and Factory reset.
or
Try restart the phone holding home Vol down and press power button to get into recovery mode. then plug in and open Kies go to tools and firmware recovery.

Tehpriest said:
OK just found it. Have a read off all the comments. Not good.
http://www.appbrain.com/app/gst-(galaxy-s-tweaker)/com.pommedeterresautee.lagfix
You could try restart holding Home Vol up and Power button then choose Clear cache and Factory reset.
or
Try restart the phone holding home Vol down and press power button to get into recovery mode. then plug in and open Kies go to tools and firmware recovery.
Click to expand...
Click to collapse
Is telling me i need recovery code, I have never received one.

Just read this so it may work for you.
disconnect the phone from USB, pull the battery, replace it, boot into recovery mode and reconnect the phone. Go back to Kies and tools firmware recovery.
In other words repeat what you have done :-s
Original post on Android Forums.
The message indicated that I would need a recovery code that could be obtained later by clicking Tools | Firmware Emergency Recovery Menu.
I was then instructed to disconnect the phone, pull the battery, boot into recovery mode and reconnect the phone which I did. The phone would not reconnect. At this point I called Samsung tech support and wasn't impressed when I was simply told to repeat the procedure. But to my surprise, the upgrade was successful the second time around. Go figure! Anyway, I was wondering if anyone else ran into the recovery code message.
Click to expand...
Click to collapse

[Q] Stuck on LG logo after CM7! help!

I recently installed CM7 after rooting my phone with Superoneclick and installing Clockworkmod. However, after installation of CM7, i managed to boot up the system, played around with it and realised that i needed to install the google addon as well. So i rebooted the phone to enter into CWM recovery, however the problem started.
My phone is now stucked on the LG logo screen and would not change. I left the phone in that state till the battery went dead. Recharged the phone and it remained on that screen.
Tried to connect the phone to the PC to flash it with smartflash, but it doesnt work at all. I removed the battery and held the volume down button while plugging in the usb cable. All i see is the phone stucked on the white LG logo screen.
Is there any way that i can reformat the contents of the phone or is my phone certified?
All help would be much appreciated!

Power up directly to cwm by pressing power button and volume down key at the same time.
Once in cwm, full wipe including /system and reflash cm and gapps.
Good luck.

I have tried that method as well. Sorry. Forgot to mention it in my initial post. It didn't work. I have tried to pull the battery, hold down the volume down and power button for at least 20 times now. Each time i get the same screen. The CWM menu does not come up.
Any other ways?

audilogic said:
I have tried that method as well. Sorry. Forgot to mention it in my initial post. It didn't work. I have tried to pull the battery, hold down the volume down and power button for at least 20 times now. Each time i get the same screen. The CWM menu does not come up.
Any other ways?
Click to expand...
Click to collapse
Hmm.....if u can't power to cwm directly then perhaps try smartflash to any stock rom.
1. Download any stock rom
2. Start smartflash app from pc
3. In power off mode, just press volume down to boot to software update screen. Start smartflash stock rom.
4. Boot up stock rom
5. Install rom manager and flash cwm from rom manager. (Or download cwm from Rusty! Cwm thread)
6. Boot to recovery
7. Flash cm rom
8. Flash gapps

Remove battery, hold both vol buttons and plug in USB. Screen should stay blank, but Windows will pick up an APX device. Now NVFlash back to stock and start again.

yup, tried the exact method that you suggested too. But it doesnt work. Still gets stuck at the LG logo.

Rusty! said:
Remove battery, hold both vol buttons and plug in USB. Screen should stay blank, but Windows will pick up an APX device. Now NVFlash back to stock and start again.
Click to expand...
Click to collapse
This method worked! But i have another problem, windows found an APX device, tried to install it but failed. It says driver was not found. Do i have to install a specific driver for this to work? Thanks!

Yes, good point: http://android.modaco.com/topic/335...k-rom-release-v10b-dated-1300166062-15032011/

I have managed to flash the phone and it is back working now. Thank you so much for your help rusty and temasek!

Hi, first post, hope the thread is not too old.
Unfortunately this is my best chance.
I have the same problem on my O1:
Updated from mik's beta 6.5.7 to beta 6.5.8 with the clockwork manager, at the reboot, I was stuck on lg logo.
Unfortunately usb + both volume buttons didn't work.
It remains still at the lg logo.
Pressing home + both volume, it repeately reboots.
In every case I can't go in recovery mode, so I can't wipe the system folder.
Any help will be appreciated,
thank for your time!
PS: sorry, maybe thread in p500, cm7 will be more appropriate.

hold power button + volume down button for 5-10 seconds may work, phone will reboot into recovery mode, then you are able to flash a stock rom or restore your nandroid-backup (if you made one)
good luck, hope it helps you

thanks, I saw a useful post here:
http://forum.xda-developers.com/showthread.php?p=18531050#post18531050
Then I proceded as you wrote.
Now I'm stuck at adroid logo, without the chance to wipe cache.
The recovery does not start: loading bar and then forced reboot...
I don't know what to do

nvflash
maybe you try this link
android.modaco.com/topic/335416-nvflash-setup-instructions-drivers-links-active/
Sorry, i don't get the link working, copy it in your browser, then it should work (i'm posting with my phone that's why the link is'nt correct, but it works with browser, i tried it out)

If the link doesnt work, search 'nvflash lg p990 instructions' with google, you'll see the modaco website with the instructions and the download links
Sent from my Optimus 2X using XDA App

Thank you. A few hours ago, I managed to make it working.
Thanks for your answers, I appreciated.

nvflash is the way to go. Always make sure to use the usb ports on your motherboard (back of your computer) and not some usb hub or so.
Had a black screen for 8 hours, not able to boot, flash, recover or anything.
Changed usb port and I was able to flash the phone again.

Stuck after data factory reset.

I'm running streak droid honeycomb. I did a factory data reset through the settings menu and the device reboooted, appeared to be resetting but no I'm stuck on a screen with the android character and a triangle with a red exclamation.
I rooted and installed this so long ago that I'm lost. I mostly mess around with my phone. Any help is appreciated. Thanks

Did you try to get into recovery after charging it? You could reflash that way or nvflash it again.
But WHY THE RUM?!!!

Follow the instructions here:
Streak 7 Flashing Guide
to get into Recovery Mode. Then select option 3; "Factory Reset (User data and Internal tablet storage".
That'll get you back to bone stock assuming all you really did was root it. Done this a bunch of times. It'll work.

joeaux said:
Follow the instructions here:
Streak 7 Flashing Guide
to get into Recovery Mode. Then select option 3; "Factory Reset (User data and Internal tablet storage".
That'll get you back to bone stock assuming all you really did was root it. Done this a bunch of times. It'll work.
Click to expand...
Click to collapse
I hope it's alright I jump in...as I have the same problem. Stock HoneyComb 3.2 not rooted. Would boot up fine, but was unable to get into recovery or fastboot so performed a factory reset through privacy setting and now stuck on the logo. I was (don't know now able to see connect using nvflash but unable to locate any clear instructions on how to flash a ROM (either a new one or stock). Hence the factory reset.
Any help would be greatly appreciated. Thanks...
Jacqueline

JacquiG said:
I hope it's alright I jump in...as I have the same problem. Stock HoneyComb 3.2 not rooted. Would boot up fine, but was unable to get into recovery or fastboot so performed a factory reset through privacy setting and now stuck on the logo. I was (don't know now able to see connect using nvflash but unable to locate any clear instructions on how to flash a ROM (either a new one or stock). Hence the factory reset.
Any help would be greatly appreciated. Thanks...
Jacqueline
Click to expand...
Click to collapse
NVFlash back to 2.2 using this link: http://d-h.st/iXc
After that using its stock recovery, using the factory Update.pkg, update to HC again. All can be found using links from this starting page: http://forum.xda-developers.com/wiki/Dell_Streak_7

wptski said:
NVFlash back to 2.2 using this link: http://d-h.st/iXc
After that using its stock recovery, using the factory Update.pkg, update to HC again. All can be found using links from this starting page: http://forum.xda-developers.com/wiki/Dell_Streak_7
Click to expand...
Click to collapse
Thanks wptski.
Using nvflash I got back to 2.2 but the problem remains that I can't boot into either stock recovery or fastboot in order to install an update.pkg.
I can connect in AXP mode but haven't found any instructions of how I can use it to perform an update or install a custom recovery. It's a problem on the tablet - all the drivers are installed on pc and I've never had any problem in the past, as long as I could get the phone into recovery or fastboot. The symptoms are soft keys light up, battery light flashes 4-5 times and then it shuts down. I can boot up normally into 2.2
I should probably find another forum for my 'new'/old problem...as I'm not stuck at Dell logo anymore :silly:
Jacqui

JacquiG said:
Thanks wptski.
Using nvflash I got back to 2.2 but the problem remains that I can't boot into either stock recovery or fastboot in order to install an update.pkg.
I can connect in AXP mode but haven't found any instructions of how I can use it to perform an update or install a custom recovery. It's a problem on the tablet - all the drivers are installed on pc and I've never had any problem in the past, as long as I could get the phone into recovery or fastboot. The symptoms are soft keys light up, battery light flashes 4-5 times and then it shuts down. I can boot up normally into 2.2
I should probably find another forum for my 'new'/old problem...as I'm not stuck at Dell logo anymore :silly:
Jacqui
Click to expand...
Click to collapse
Okay, to get into the stock recovery and /or Fastboot mode you are holding the up/down volume button and the power ON button at the same time, correct? It does take a 2-3 seconds for either to come up on the screen.
You can't installing anything from APX mode or get into recovery mode from it either.

wptski said:
Okay, to get into the stock recovery and /or Fastboot mode you are holding the up/down volume button and the power ON button at the same time, correct? It does take a 2-3 seconds for either to come up on the screen.
You can't installing anything from APX mode or get into recovery mode from it either.
Click to expand...
Click to collapse
Correct re: stock recovery/fastboot - lights flash shuts down. I can get into APX mode, that's how I got 2.2 on it. I can't find instructions though on how to do anything else with APX - like get into recovery mode The link giveen provided me in another post has a prewritten batch file I used - so my thanks goes to the author.

JacquiG said:
Correct re: stock recovery/fastboot - lights flash shuts down. I can get into APX mode, that's how I got 2.2 on it. I can't find instructions though on how to do anything else with APX - like get into recovery mode The link giveen provided me in another post has a prewritten batch file I used - so my thanks goes to the author.
Click to expand...
Click to collapse
Just to be clear, you are pressing and holding those buttons at the same time for several seconds?

wptski said:
Just to be clear, you are pressing and holding those buttons at the same time for several seconds?
Click to expand...
Click to collapse
correct - left vol button + pwr or right vol button + power: lights flash, turns off - both left and right w/usb connect for apx successful

JacquiG said:
correct - left vol button + pwr or right vol button + power: lights flash, turns off - both left and right w/usb connect for apx successful
Click to expand...
Click to collapse
Have you tried to NVFlash 2.2 again? From your other post, you were on 3.2 before so I'd retry the NVFlash again, at least. It seems that you got into stock recovery mode before so the buttons did work before although I have heard of them getting stuck with both ON.

wptski said:
Have you tried to NVFlash 2.2 again? From your other post, you were on 3.2 before so I'd retry the NVFlash again, at least. It seems that you got into stock recovery mode before so the buttons did work before although I have heard of them getting stuck with both ON.
Click to expand...
Click to collapse
Thanks so much for your help wptski!
I re -nvflash'd 2.2 with the same result....successful flash and can boot into OS. Still unable to get into stock recovery or fastboot. The buttons don't feel stuck - but? Can I use nvflash to get anything other than 2.2 on to it? This all started with wanting nothing more than a 'simple' root Since I"m broken, any chance I can use nvflash to to get TWRP and ICSB4 on it - nothing to lose at this point
Another thought: would moving to a linux machine open up more possibilities?

JacquiG said:
Thanks so much for your help wptski!
I re -nvflash'd 2.2 with the same result....successful flash and can boot into OS. Still unable to get into stock recovery or fastboot. The buttons don't feel stuck - but? Can I use nvflash to get anything other than 2.2 on to it? This all started with wanting nothing more than a 'simple' root Since I"m broken, any chance I can use nvflash to to get TWRP and ICSB4 on it - nothing to lose at this point
Click to expand...
Click to collapse
Here's a test to see if your buttons are stuck since you have the NVFlash drivers installed, with the S7 OFF just plug into your PC, if you hear the normal audio sound when you plug in something into your USB port, they are stuck. Not sure if it would boot normally with stuck buttons.

wptski said:
Here's a test to see if your buttons are stuck since you have the NVFlash drivers installed, with the S7 OFF just plug into your PC, if you hear the normal audio sound when you plug in something into your USB port, they are stuck. Not sure if it would boot normally with stuck buttons.
Click to expand...
Click to collapse
no sound when turned off and plugged into usb

JacquiG said:
no sound when turned off and plugged into usb
Click to expand...
Click to collapse
Only one last suggestion is to redownload 2.2 and flash again.

wptski said:
Only one last suggestion is to redownload 2.2 and flash again.
Click to expand...
Click to collapse
Thanks, I'll try that. Is there maybe another download I should try with md5 check? Or just use the same one I have?
Third time's a charm?! :fingers-crossed:
Update: unfortunatley, no change. I guess for now my Streak is stuck on 2.2 and I'll use it as an alarm clock
Thanks so much for your help!

JacquiG said:
Thanks, I'll try that. Is there maybe another download I should try with md5 check? Or just use the same one I have?
Third time's a charm?! :fingers-crossed:
Update: unfortunatley, no change. I guess for now my Streak is stuck on 2.2 and I'll use it as an alarm clock
Thanks so much for your help!
Click to expand...
Click to collapse
I can put my copy in DropBox and give you the link if you want?
Here's a link to my copy: https://dl.dropboxusercontent.com/u/21386595/Restore to 2.2.rar

Motorola milestone BLACK SCREEN

Hi,
I just (Well about a month or two ago) bought my-self a motorola milestone then i really loved it...
Now just now, i wanted to change the battery icon for fun right... and then i downloaded the framework-res.apk and i replaced it in the system>framework... then I Kept on receiving a message saying launcher pro unresponive... and there was only on option FORCE CLOSE... so i did but it kept on showing up so bassically i couldnt use my phone... so i pulled the battery out and put it back in i then saw the (M) logo and i thought it was going to be fine... but right after 20-30 seconds. there was a light black screen and i waited there for 10 miutes and nothing happened...
Rooted
ANDROID 2.3.7
CM7

Make a backup and try to re-apply the ROM's update.zip without wiping anything.

Eiertschik said:
Make a backup and try to re-apply the ROM's update.zip without wiping anything.
Click to expand...
Click to collapse
the problem is i can't show the phone on my computer because it needs to be turned on... And also, my power button is broken...Do you think there is another way to access my phone's system on my computer? :crying:

Pull the battery, connect the USB-cable, re-insert the battery and hold the x button while doing so.
This should take you to recovery and from there you can enable USB mass storage mode.

Eiertschik said:
Pull the battery, connect the USB-cable, re-insert the battery and hold the x button while doing so.
This should take you to recovery and from there you can enable USB mass storage mode.
Click to expand...
Click to collapse
Thanks... But its stuck on the bootloop... I think im getting it fixed tomorrow though...
Thanks Anyways...
P.S: Although if you can think a way around the bootloop...

Try to enter recovery - either by holding X on the keyboard while powering on or pressing down on your D-Pad.
Recovery works, even if the Android system is bootlooping because it lives on a seperate partition.
You already did this before flashing the ROM.

Eiertschik said:
Try to enter recovery - either by holding X on the keyboard while powering on or pressing down on your D-Pad.
Recovery works, even if the Android system is bootlooping because it lives on a seperate partition.
You already did this before flashing the ROM.
Click to expand...
Click to collapse
I have done that but then, what do I do?

Just follow the instructions again - it's not that hard.
Press Volume Down and Camera to access menu, apply update.zip, then Open Recovery starts, and so on...

Blank Screen
Pulled battery and connected USB... WORKED!
Idk why, but a million thanks!
:good:
eliottkid123 said:
Thanks... But its stuck on the bootloop... I think im getting it fixed tomorrow though...
Thanks Anyways...
P.S: Although if you can think a way around the bootloop...
Click to expand...
Click to collapse

[Q] Stuck on Htc Logo and can not power off

Hi Everyone;
I unlocked my phone for flashing custom rom. After unlocking i reebooted it and was normal. Then i flashed cwm via htc one toolkit. It was successfull as well. Then i go to cwm and made factory reset + wipe cache + dalvik cache. Then i go to install zip from sd card but i could not find my rom file. Thought, it was deleted while unlocking device. Then decided to reboot phone again to copy rom file into the phone and reboot.
But, when i rebooted phone from cwm, it stuck on HTC Logo( Quietly Brilliant screen). Waited sometime, but nothing happened. Then i tried to power off it and boot into bootloader or recovery. I press and hold power button but it does not respond anyhow. When i am holding power button ,back and home buttons are blinking but nothing happens. Almost five minutes i waited as holding down power button but phone does not power off anyhow. i tried all methods like vol down + power, vol up + power and both volume keys + power. But really nothing happens, just blinking back and home buttons. That's all.
I can not simply power off device. :crying:
I also tried boot device via fastboot commands but it says "waiting for device" means computer does not recognize device.
Guys, i need an urgent help. Please...

just keep trying to reboot via holding power or power+vol down. if it doesnt reboot after 30 sec or so let go then try again. if that doesnt work you will have to wait for the battery to die. once you get to bootloader use all in one toolkit to erace cache. then boot to recovery and you rom should be there if not boot back to bootloader and sideload rom

skinsfanbdh said:
just keep trying to reboot via holding power or power+vol down. if it doesnt reboot after 30 sec or so let go then try again. if that doesnt work you will have to wait for the battery to die. once you get to bootloader use all in one toolkit to erace cache. then boot to recovery and you rom should be there if not boot back to bootloader and sideload rom
Click to expand...
Click to collapse
just keep trying to reboot via holding power or power+vol down. if it doesnt reboot after 30 sec or so let go then try again. if that doesnt work you will have to wait for the battery to die. once you get to bootloader use all in one toolkit to erace cache. then boot to recovery and you rom should be there if not boot back to bootloader and sideload rom
Click to expand...
Click to collapse
First thank you for your quick reply. Unfortunatelly, power+vol down does not work at all. Maybe i tried 50 times.
Anyhow, after battery die. How can i boot into bootloader. I mean, can phone be charged again in this situation? Also, even if i manage to boot into bootloader or recovery how can i put custom rom file into phone. Actually, i did not use sideload or whatever you mentioned before.
I am serouisly confused now and don't know what to do.
Anyhow, as you said, firlst i need wait to battery die i think. Then i will report back whats happen.
Thank you again btw.

Blue_Shine said:
First thank you for your quick reply. Unfortunatelly, power+vol down does not work at all. Maybe i tried 50 times.
Anyhow, after battery die. How can i boot into bootloader. I mean, can phone be charged again in this situation? Also, even if i manage to boot into bootloader or recovery how can i put custom rom file into phone. Actually, i did not use sideload or whatever you mentioned before.
I am serouisly confused now and don't know what to do.
Anyhow, as you said, firlst i need wait to battery die i think. Then i will report back whats happen.
Thank you again btw.
Click to expand...
Click to collapse
yes your not the first person with this problem. hold power+vol down to get into bootloader. press power button in bootloader to get in fast boot mode. use all in one toolkit to erase cache and side load rom. i recommend all in one toolkit because it automates the process. just select the option then follow on screen steps

Good to hear that i am not the first person That means somehow there is a solution i beleive. Still waiting for battery die. even i had 50 percent battery at the begining but still it holds on I never say again htc battery is bad
I exeprienced that stucking on boot logo several times before with my other htc phones but holding power + vol down/up worked always. This is the first time for me that i faced with power button can not power off device.. Well, ,i hope i wish i can handle out this problem. Definetley with your help.
Regards,

I am having the same problem and don't know what to do :crying:
Today I just got my One. Unlocked bootloader, rooted, flashed Android Revolution rom. Everything worked fine for a while... I wanted to reinstall the rom because I wanted to change some options in the installer - I did not wipe because it was the same rom (big mistake I guess!!). After making the installation option changes, when it was done it proceeded to reboot but now I am stuck in a white HTC logo boot loop hell... (with the red text at the bottom that says "this build is for development purposes only" etc). Holy crap I never had a phone that I could not remove the battery. I cannot get this back into recovery or ANYTHING, it just keeps looping... computer recognizes it, no problem with drivers or anything it just doesn't stay connected long enough (because of the constant looping) to be able to use the toolkit.
PLEASE any advice?? Can't even shut it down omg. Do I have a $600 brick here? :crying::crying:

Deeva said:
I am having the same problem and don't know what to do :crying:
Today I just got my One. Unlocked bootloader, rooted, flashed Android Revolution rom. Everything worked fine for a while... I wanted to reinstall the rom because I wanted to change some options in the installer - I did not wipe because it was the same rom (big mistake I guess!!). After making the installation option changes, when it was done it proceeded to reboot but now I am stuck in a white HTC logo boot loop hell... (with the red text at the bottom that says "this build is for development purposes only" etc). Holy crap I never had a phone that I could not remove the battery. I cannot get this back into recovery or ANYTHING, it just keeps looping... computer recognizes it, no problem with drivers or anything it just doesn't stay connected long enough (because of the constant looping) to be able to use the toolkit.
PLEASE any advice?? Can't even shut it down omg. Do I have a $600 brick here? :crying::crying:
Click to expand...
Click to collapse
Did you read the other posts in this thread? The way you do a "battery pull" on this phone is to HOLD the PWR + VOL DOWN button for ~15seconds. Your capactivie buttons will blink, too. On my device, it took exactly 15seconds to reboot. There have been some reports of some phones that get so stuck that you just have to wait until the battery dies and charge it back up.
Alternatively, if the computer is recongizing it, try to adb reboot recovery to try and get into the recovery.

Deeva said:
I am having the same problem and don't know what to do :crying:
Today I just got my One. Unlocked bootloader, rooted, flashed Android Revolution rom. Everything worked fine for a while... I wanted to reinstall the rom because I wanted to change some options in the installer - I did not wipe because it was the same rom (big mistake I guess!!). After making the installation option changes, when it was done it proceeded to reboot but now I am stuck in a white HTC logo boot loop hell... (with the red text at the bottom that says "this build is for development purposes only" etc). Holy crap I never had a phone that I could not remove the battery. I cannot get this back into recovery or ANYTHING, it just keeps looping... computer recognizes it, no problem with drivers or anything it just doesn't stay connected long enough (because of the constant looping) to be able to use the toolkit.
PLEASE any advice?? Can't even shut it down omg. Do I have a $600 brick here? :crying::crying:
Click to expand...
Click to collapse
no. if it turns on you should be ok. try holdind power+vol down to get into bootloader then try toolkit if it just stays on waiting for device press power button to get into fastboot mode from bootloader

skinsfanbdh said:
yes your not the first person with this problem. hold power+vol down to get into bootloader. press power button in bootloader to get in fast boot mode. use all in one toolkit to erase cache and side load rom. i recommend all in one toolkit because it automates the process. just select the option then follow on screen steps
Click to expand...
Click to collapse
hi again. this morning my battery finally out. Then i put my phone to the charger and started it in fastboot mode( that is a good new) Then i left it for 20-30 minutes to charge a little bit for flashing custom rom.Then i went to recovery and started adb sideload. Sideload was succesful and finally came to aroma installer of trickdroid. I chose my installation options and started to flash rom but process was frozen on 10 percent. It was saying unmount system, unmount cahce and both of them has notification as "already unmounted". But installation was not going on. Then again i tried to go back fasboot mode again by press and holding power+vol down but unfortunatelly lights are blinking but nothing happens again. I think i need to wait to battery die again.
Isn't it quite weird? Why power+vol down combination does not work for me anytime? So, do i need to wait for battery die in every frozen? Do you have any ideas or comments ?
Do i need to go back to stock first ?
EDIT : Battery was out again and i tried once more. This time installation (trick droid) was successful but it frozen at the end this time. And unfortunatelly i can not restart (power+vol down) it again again Holy crap, i am really pissed off with this problem.

O..K...Finally, i managed to start my phone and now it works... Especially thank you skinsfanbdh for your support.
But still i don't know how to solve button configuration problem. But anyhow i think i won't need quite sometim to use it I hope someone can find a solution for that later.

Guide me with steps please
Blue_Shine said:
O..K...Finally, i managed to start my phone and now it works... Especially thank you skinsfanbdh for your support.
But still i don't know how to solve button configuration problem. But anyhow i think i won't need quite sometim to use it I hope someone can find a solution for that later.
Click to expand...
Click to collapse
Hi, I have the same problem now and I let my phone die but when I put it to charge and try to go in bootloader, it's doesn't go and gets stuck at the logo again.
Would you please guide me with the steps how u fixed your phone?

Blue_Shine said:
O..K...Finally, i managed to start my phone and now it works... Especially thank you skinsfanbdh for your support.
But still i don't know how to solve button configuration problem. But anyhow i think i won't need quite sometim to use it I hope someone can find a solution for that later.
Click to expand...
Click to collapse
Do u fix it,i have same problem.on Zenfone max.after successfully rom installation i reboot my phone thn it stuck on resurrection remix logo,then i go into recovery,and mount the stock image without wiping.then twrp showed that image installation successful.thn i reboot it in recovery but it stuck on asus logo.what can i do right now?

Fix it
skinsfanbdh said:
no. if it turns on you should be ok. try holdind power+vol down to get into bootloader then try toolkit if it just stays on waiting for device press power button to get into fastboot mode from bootloader
Click to expand...
Click to collapse
Today i fixed it via asus flash tool.with the right steps it can be flash to stock with no problem

What should I do if I can't even get to the boot screen? I tried holding down the power and volume up buttons, but it just restarts and goes back to the same HTC load screen, what do I do????