Database Develop

[Q] messed up

the problem:bricked phone
how:tried flashin to darky's 9.5 using rom manager without precautions
feature before flashin:1.using speedmod cwm k13e 5oohz big memory version,cwm enabled,froyo stock 2.2..ddjp6
2.lagfix enabled,file and data system was converted to ext4
3.rooted,bln enabled along with other tweaks of speedmod
now:unable toget into recovery,phone gets stuck in samsung gt i9000 screen...download mode possible..
should i use odin to flash back using download mode??wat precautions i shud take..i mean phone is rooted plus lagfix but i cant enter recovery to unlagfix....need help guys

You can flash darky rescue center. Download it. All instructions are in darky zip file.
Sent from my GT-I9000 using XDA Premium App

Nowhere near bricked... But you have to follow directions now.
Flash either a 2.1 or 2.2 rom. The rom has to be 3 files. You need to flash with a 512 pit and re-partition.

electrotune1200 said:
Nowhere near bricked... But you have to follow directions now.
Flash either a 2.1 or 2.2 rom. The rom has to be 3 files. You need to flash with a 512 pit and re-partition.
Click to expand...
Click to collapse
+1
Sent from my GT-I9000 using XDA Premium App

senotrius said:
the problem:bricked phone
how:tried flashin to darky's 9.5 using rom manager without precautions
feature before flashin:1.using speedmod cwm k13e 5oohz big memory version,cwm enabled,froyo stock 2.2..ddjp6
2.lagfix enabled,file and data system was converted to ext4
3.rooted,bln enabled along with other tweaks of speedmod
now:unable toget into recovery,phone gets stuck in samsung gt i9000 screen...download mode possible..
should i use odin to flash back using download mode??wat precautions i shud take..i mean phone is rooted plus lagfix but i cant enter recovery to unlagfix....need help guys
Click to expand...
Click to collapse
flash 2.3.3 : http://dl.dropbox.com/u/19506141/GT_I9000_XWJVH_XXJVO_NEEJV3_Sbl.exe
or stock 2.2.1 : http://dl.dropbox.com/u/19506141/Stock - stock modems/HerstelROM_I9000_XWJM2.zip
with odin : http://dl.dropbox.com/u/19506141/flash en drivers/Odin_+_pit.exe
with pit 512, and check repatition.

do we need bootloaders for 2.3.3?

senotrius said:
do we need bootloaders for 2.3.3?
Click to expand...
Click to collapse
if you are coming from froyo rom and want to upgrade to GB youll need bootloader.
if you download files posted above youll be alright.
safe bootloaders are included

i have already pressed the thanks button but thanks again ...so is the 2.3.3 included here the stable gb one that got released afew days ago...?

senotrius said:
i have already pressed the thanks button but thanks again ...so is the 2.3.3 included here the stable gb one that got released afew days ago...?
Click to expand...
Click to collapse
yes this is the latest GB release XWJVH, with bootloaders.....
flashed it myself countless times....

oh great ...hey,so which one is the best custom kernel for gingerbread now...im a fan of speedmod myself...it doubled my stock froyo battery life and speed of phone as well..but no stable ones for gingerbread...which ones do u recommend?....imean speedmod had everything on the stable froyo release:lagfix,ext4 data and system,344 or is it 355 mb plus ram,voodoo support,bln,u name it and it has it!!oh and how to root 2.3.3...superoneclick is my choice in froyo...wat about gingerbread...?

senotrius said:
oh great ...hey,so which one is the best custom kernel for gingerbread now...im a fan of speedmod myself...it doubled my stock froyo battery life and speed of phone as well..but no stable ones for gingerbread...which ones do u recommend?
Click to expand...
Click to collapse
you can use :
http://dl.dropbox.com/u/19506141/Gingerbread-GT-I9000-XWJVH-stock-kernel+hacks.tar
or : http://dl.dropbox.com/u/19506141/Stock - stock modems/CF-Root-XW_XEE_JVB-v3.1-CWM3RFS.tar
i use second one, with apps. EXT4 / TWEAKS (included) its easy to (de)activate lagfix......
do not extract files but flash using odin (PDA, repartition NOT checked)

ok,what are the names of these kernels?i use sgs kernel flasher to flash..it works perfectly for froyo..any advice for gingerbread?the app reads all types;cwm kernel file or tar btw..u must be familiar im sure?im not taking anymore chances of messing up my phone again

senotrius said:
ok,what are the names of these kernels?i use sgs kernel flasher to flash..it works perfectly for froyo..any advice for gingerbread?the app reads all types;cwm kernel file or tar btw..u must be familiar im sure?im not taking anymore chances of messing up my phone again
Click to expand...
Click to collapse
first kernel info :
http://forum.xda-developers.com/showthread.php?t=975349
sec. : http://forum.xda-developers.com/showthread.php?t=788108&highlight=CF-root
flash (TAR) files in odin.....PDA
have to go to work now...
if you have problems send me a PM.....

ohk sorry for bugging u long

senotrius said:
ohk sorry for bugging u long
Click to expand...
Click to collapse
Its ok...have to earn some cash to......
Sent from my GT-I9000 using Tapatalk

[Q] Help me plz or else i will die!!!

ok cool down people...
just a simple question..
i use SGS i was in froyo stock which came with the fone and now im in gingerbread JVB stock rom and i want to go to Darkys ROM Resurrection Edition 9.3 how can i???? im new to this Android thingies i was a symbian user..
yeah i know its old a bit but i heard its more stable!!

flash darkys 9.2 odin version with pit and re-partition. then upgrade
simples

azzledazzle said:
flash darkys 9.2 odin version with pit and re-partition. then upgrade
simples
Click to expand...
Click to collapse
so i flash my SGS gingerbread to Darkys rom 9.2 then i flash to Resurrection Edition??
why not straight to Resurrection Edition?

Buy whens funural
Sent from my GT-I9000 using XDA App

colindodds said:
Buy whens funural
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
hey help me out man stop asking about the funeral

someone nhelp me outtttttt plzzzzzz can i flash Darkys rom using CWM??

flash 9.2 in odin then flash resurrection in CWM

azzledazzle said:
flash 9.2 in odin then flash resurrection in CWM
Click to expand...
Click to collapse
ok now i got it thx man!!

Lol, wtf are you all talking about??
I am not a android specialist or somethin like that, but if you work trough the tutorial in darkys thread, you will get gingerbread that looks like gingerbread, not like stock samsung firmwares.
Why do you make it so difficult?
Just flash the Ficeto JVB stock rom trough odin, then reboot. then flash the dark core 2.2, reboot and install superuser from market. then just flash trough clockwork recovery/dark recovery darkys rom v10 rc6 or final, whatever you want... I prefer v10, it works more stable, even if its a rc.
So, the only important thing is, follow the manual and you will reach your destination
http://www.darkyrom.com/community/i...v10-rc6-i9000-i897-stable-but-not-final.2420/
Here's the link to the instructions...
Have fun and good luck, dude

correct me if im wrong !!!
he wants to use darkys 9.3.
that is not a gingerbread rom is it ?? im sure its a froyo rom (i dont use darkys roms)
so going from gingerbread to froyo without changing the bootloaders can cause issues.
flashing JVB is not gonna help as that is also gingerbread ...

Well, then he could have a look at darkys thread and follow another manual to get to darkys 9.5.
I cant imagine, why somebody would use atm somethin like froyo Its so ultra-old. v10 is much better in every aspect. The only disadvantage is that there arent any kernels for OC/UV :/ But everything else is awesome. Just like the crt screen off animation and the overscroll glow
Anyways, you have to go to darkys thread and make then some conclusions about it instead of just postin a thread about your problem. If you would read the first post, you would know even more, than now

[Q] I want to flash a custom rom

Hi
my phone is a galaxy GT-I9000
PDA : I9000BGJP3
PHONE : I9000BGJP2
CSC : I9000XECJP2
Build Info : 2010, 11
it has froyo 2.2 , Movistar Spain stock rom
it is not rooted
and it has recovery and download modes
Now I want to flash a custom rom (cyanogen or darky's)
i have read a lot of guides and tutorials but i'm still a little confused
So I want to know if I need to flash the firmware first, then only after that, I install the custom ROM ?
Or do I directly install a custom rom without flashing a new firmware ?
thanks for your help

Hi ziko360, since it sounds like you are new to custom roms I recommend you first try darkys rom.
If you are wanting to flash darkys v10.1 then yes you first need to flash the jvh firmware then flash darkys v10.1 after.
If you dont want to flash a custom rom you could always flash jvo from samfirmware.com then just flash a custom kernal instead.
Edit: Iv just noticed you asked in another post that you wanted to install the voodoo lag fix. If you have done this, then remember you must first diable the lag fix!
Sent from my GT-I9000 using XDA App

Sparksltd said:
Iv just noticed you asked in another post that you wanted to install the voodoo lag fix. If you have done this, then remember you must first diable the lag fix!
Click to expand...
Click to collapse
Can you tell us how to disable the lag fix... I think that its this error I've created last time ^^
Mellovia S.
Sent from my GT-I9000M using XDA Premium App

You should create a file or folder named disable-lagfix and place it in the voodoo directory on your sd card and reboot the phone. Or if that's too complicated you can Download from the android market the application Voodoo Toggle reboot Button - just hit the button so that voodoo is off and reboot. Also, in the app Voodoo Control there is option to disable voodoo lag fix

Ok thanks alot. i'll check this soon..;-)
Sent from my GT-I9000M using XDA Premium App

Sparksltd said:
Hi ziko360, since it sounds like you are new to custom roms I recommend you first try darkys rom.
If you are wanting to flash darkys v10.1 then yes you first need to flash the jvh firmware then flash darkys v10.1 after.
If you dont want to flash a custom rom you could always flash jvo from samfirmware.com then just flash a custom kernal instead.
Edit: Iv just noticed you asked in another post that you wanted to install the voodoo lag fix. If you have done this, then remember you must first diable the lag fix!
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
ok thanks a lot
It is actually Darkys 10.1 that I have chosen
I've read the tutorial on Darky's website and it explains everything (flashing jvh firmware, disabling lagfixes... )
thanks for your help

ziko360 said:
ok thanks a lot
It is actually Darkys 10.1 that I have chosen
I've read the tutorial on Darky's website and it explains everything (flashing jvh firmware, disabling lagfixes... )
thanks for your help
Click to expand...
Click to collapse
The fix is flash stock Froyo with pit and repartition checked via Odin if rom breaks your phone .
jje

[Q] Plz Help S.U.R.F.A.C.E. v8.02

I have MIUI Mintberry 1.12.25 on my GT-i9000. I was trying to flash a new ROM, S.U.R.F.A.C.E. v8.02. I did wipe data, cache and factory reset in CWM. Then selected the .zip of SURFACE. But after reboot, its still MIUI Mintberry. Plzz help..
I had used WIPE edition of SURFACE ROM.

guru_iyer said:
I have MIUI Mintberry 1.12.25 on my GT-i9000. I was trying to flash a new ROM, S.U.R.F.A.C.E. v8.02. I did wipe data, cache and factory reset in CWM. Then selected the .zip of SURFACE. But after reboot, its still MIUI Mintberry. Plzz help..
I had used WIPE edition of SURFACE ROM.
Click to expand...
Click to collapse
Well surface rom is based on jw1, and i don't think miui is based on jw1, so you should flash stock jw1 from odin then from there flash surface rom via recovery. Try it and tell me how it goes.

I am not able to get JW1 Stock ROM for Galaxy S. Can I flash 2.3.6 rooted I9000XWJVZ by Stock+.....???

What do u mean you can't get it? And I don't think so I think you shud be on jw1 bcuz that's wat the rom is based on.
Sent from my GT-I9000 using XDA App

guru_iyer said:
I am not able to get JW1 Stock ROM for Galaxy S. Can I flash 2.3.6 rooted I9000XWJVZ by Stock+.....???
Click to expand...
Click to collapse
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9000&r=1#
you can get JW1 stock firmware from here.. flash using odin with all.. but this will be an unrooted version I think..
you can get base JW1 from Darkyrom.com .. I think that'll be the best option..

ishangoyal said:
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9000&r=1#
you can get JW1 stock firmware from here.. flash using odin with all.. but this will be an unrooted version I think..
you can get base JW1 from Darkyrom.com .. I think that'll be the best option..
Click to expand...
Click to collapse
yes this will be unrooted but you can just flash semaphore or any other kernel with cam and then flash surface

[Q] Newbies On Rom & Root

hi guys im new to roms , kernels and roots. So what i have is a samsung galaxy note which is kinda outdated using gingerbread 2.3.6. Since i saw lots of post about fantastic rom such as the rocketrom , alliancerom and alot more and they also come with JellyBeans.
The main problem i facing is , i would like to know about the facts that after playing with roms what will happen to my phone ? i mean in future will the devices gone wild or maybe dead. I have no idea wth that , so i hope someone enable to give me some advices and consequences of doing these. Any helpful tips will be much appreciate. =)
i wish to change my phone into rocketrom with the latest version of it. so is there any kernels that i can use which is absolutely stable & brickfree.
THANKS FOR ANY HELPFUL TIPS =)

running GB... and want to go to JB
1. root
2. install CWM
3. download Rocket rom on to storage
4. boot into cwm
5. wipe data factory reset, wipe cache, wipe dalvik, format /system
5. install the rom
do a lot of reading

Playing with roms doesnt make your phone go wild or get bricked until u flash a rom in a wrong way
And you always need to be on a safe kernel before u flash a rom
As u are on gb,all stock gb roms are safe to flash..so root your phone and get cwm
Then do wipes and flash the rom

rajsekhar.300 said:
Playing with roms doesnt make your phone go wild or get bricked until u flash a rom in a wrong way
And you always need to be on a safe kernel before u flash a rom
As u are on gb,all stock gb roms are safe to flash..so root your phone and get cwm
Then do wipes and flash the rom
Click to expand...
Click to collapse
thanks for the helpful tips , so can u guys recommend me some BRICKFREE absolute STABLE Kernel for RocketRom V2.. Thanks ? :laugh::laugh:

JasonAkon said:
thanks for the helpful tips , so can u guys recommend me some BRICKFREE absolute STABLE Kernel for RocketRom V2.. Thanks ? :laugh::laugh:
Click to expand...
Click to collapse
All gb roms are safe to flash..so just get rooted and flash rocketrom
And rocketrom comes with a safe and brickfree kernel,so its not required to flash another kernel after u flash rocketrom
And i guess there are no other kernels compatible with jb roms other than the philz kernel that comes with the rom

rajsekhar.300 said:
All gb roms are safe to flash..so just get rooted and flash rocketrom
And rocketrom comes with a safe and brickfree kernel,so its not required to flash another kernel after u flash rocketrom
And i guess there are no other kernels compatible with jb roms other than the philz kernel that comes with the rom
Click to expand...
Click to collapse
i second that.. use Philz kernel that comes with the rom. Tested i flashed Hydracore and my phone wont boot. had to flash back RRv2 JB.

hydracore v7 does not work with the tw based roms jb as of now. and will not work until an official jb rom is released.

IcIc
btw how bout kernel which fits properly without brick with RocketRom ICS V12 :laugh::laugh::laugh: