Yesterday i used Odin3 v1.7 to flash my sprint galaxy tab,and it says i must have "p1_add_hidden.pit" "p1000xwjj4-rev03-all-cl639474.tar.md5" "modem_p1000xxjid.tar.md5" "gt-p1000-csc-serjj2.tar.md5" ,i only have"p1_add_hidden.pit",so can anybody know where to download the files or send me that three files? thanks a lot
my e-mail is [email protected]
no one know how to do?
Please give more info as to what rom you are trying to flash.
Hey everyone,
I have a Samsung Galaxy Tab running Overcome 1.6.3
I've been having an issue with it overheating and turning itself off (nothing to do with the custom ROM, was doing it before, I was hoping the custom ROM would fix it but it didn't).
I rang Samsung about it and they told me to take it back to where I bought and get them to send it in to me.
My issue is that as soon as they see that it's running a Custom ROM they'll send it straight back to me!
Basically I'm trying to work out the Optus Factory ROM / Modem / PITT files so I can put the correct files back on using ODIN.
Does anyone have a stock Optus Galaxy Tab they can give me all the info for?
PDA: ?
PHONE: ?
CSC: ?
Model Number: ?
Firmware Version: ?
Kernal Version: ?
Build Number: ?
Thanks,
Mitchell !
you could try reading this - http://forum.xda-developers.com/showthread.php?t=1047516
might get an answer quicker =)
Thanks, hadn't seen that.
Will move the question
the firmware my tab came with was JJ4, but when I got it back from repair it came with JMA, so it is hard to say what you should have
Thanks!
I ended up ringing one of the stores and asking them to read me out all the numbers off the Display model (figured it had never been updated).
It is as follows:
PDA: P1000XWJJ4
PHONE: P1000XXJID
CSC: P1000OPSJJ3
I was able to get the PDA + PHONE default files, but I could only get a default CSC file (SERJJ2) because no one had posted the Optus CSC file.
I'm restoring it all now, will let you know how it goes, cheers !
Hi there,
Did you get it working?
I am trying to restore my optus galaxy tab using odin as well, its a nightmare!
I also have the first two files (and not the csc file), but dont know how to do it.
I have the gt-p1000_mr.pit file loaded in odin along with the PDA and phone one (P1000XWJJ4 & P1000XXJID). I have the three boxes ticked, auto reboot, repartition, f. reset time etc. then i press start. It updates for a while then fails near the end. What am I doing wrong? Is it because i dont have the csc file or is there a certain order to do things?
karfeef said:
you could try reading this - http://forum.xda-developers.com/showthread.php?t=1047516
might get an answer quicker =)
Click to expand...
Click to collapse
By the way this link doesn't work
Hey, yep I did end up getting it fixed !
Just at work at the moment but I'll post detailed instructions when I get home !
Awesome! This little saga is almost making me consider splashing out and going ipad, but I am being patient. I think theres a learning curve and then all will be good no? or have you got rid of yours since haha
All is good
I ended up finding teamovercome.net and installed their ROM which Im happy with so far. No optus stuff which is a plus
Hey, sorry for the delayed reply. The time zone difference thing over here is still messing with my head. Glad to hear you got it all sorted. I had a look back through all of my stuff and like an idiot I don't have anything saved any more, but oh well.
Haven't gotten rid of mine, but haven't touched it for about a month and a half, since moving over to the US, and not wanting to pay for a SIM card for it.
which version rom are using from overcome and is there any problems with using it on the optus network
This My Optus Samsung Galaxy P1000
This My Optus Samsung Galaxy P1000
PDA P1000XWJM1
Phone P1000XXJMA
CSC P1000OPSJM7
Firmware 2.2
Kernel 2.6.32.9
FROYO.XWJM1
I give you a copy if new how to copy the Firmware
being you are in Brisbane like me , See you not anymore
Any Link to tell you how?
I bought a SGT P1000 2nd hand (unlocked from Orange UK) and it was working perfectly. I wanted to change the firmware as I am not keen on the branded orange firmware.
In my past experiences on mobile fone firmwares I am quite good. Anyway every firmware I try and fololw the guides for those firmwares I get always end up not able to boot from the Galaxy Tab Samsung screen.
all installs from Odin3 v1.7 are fine. even the Download logo on galaxy tab shows up but cant allways access back reboot area depending on firmware installed. but can never pass the Galaxy Tab Samsung screen.
I did not get any info from +#12345# <<<<---- i know i may have wrote that wrong) because i never checked i was lazy. so really I have no clue what firware i need to get exactly and any other bits i need.
so if anyone can advice i would be much appreciated my tab is
Samsung galaxy GT-P1000 from Orange PLc UK) Unlocked (2nd Hand)
What is the model of your GT. Check the back of the unit which should start with P1000 then a letter.
Once you have that, then go to samfirmware.com and look for the correct ROM for your model and download.
Download Kies on your computer to make sure drivers are installed and unit is connecting to your PC.
Download Odin 1.7 and follow instructions with downloaded ROM.
Good luck, most of us have been where you are today.
Let me know how it goes
hello fella thanx for the reply..
On the back of the galaxy tab it just says Model: GT-P1000
and on the box it says P1000 PM
I will follow what you said and have a go. thanx fella for the support
I will let you know what happens and be back to check this post in case you
have any further info.
well I have gone to this page fwandroid.htm on that site you suggested
and all i could find is Samsung P1000 / Galaxy Tab
no extra in list which have PM in letters.
I enter the link and it takes me to Europe Samsung P1000 Firmwares.
but also which do i choose cause i have no idea which is the right firmware for me as i see a list combining of for an example
Europe Firmware
P1000XXJH3 #
P1000XXJH8 #
P1000XXJHA ##
P1000XXJI2 ##
P1000XXJI4 ##
P1000XXJI5 ##
My GT is version P1000N so mine corresponds to America Australia Samsung P1000 Firmwares.
What I would do if I were in your situation, I would try to flash version P1000XXJMQ. By mistake I installed it on my device and it never worked because mine is from a different region but I was able to bring it to the correct firmware..
Go ahead and try it. Just make sure you know how to flash with odin, have a full battery and any other questions I'll be glad to see if I can be of any help to you.
By the way, your device appears to be from network carrier Play and from region Poland. You can confirm here samsunglettercode.htm in the site I mentioned earlier.
Good luck!
in the same boat...
im in the same situation...i bought this tab from a friend...he ended up bricking it...he bought it from amazon and it only says GT-P1000...no letter...mine is unlocked as well and doing the same...so lost..how do i find out what
Does the unit even starts? Do you see the samsung logo? Can you go todownload mode?
________________________________
TABLET » Samsung Galaxy Tab P1000N
ROM » Stock P1000N Gingerbread 2.3.3
KERNEL » Stock P1000N Gingerbread
mine does..
i can get mine to download mode and recovery mode...but i get errors in recov...i have another post that is more detailed....http://forum.xda-developers.com/showthread.php?t=1123123...its got pics of the errors...any ideas?
I suggest you guys look into GalaxyTab Android Development forum. There you will find all the information on how to flash, the correct roms for you're unit etc.
Good luck
________________________________
TABLET » Samsung Galaxy Tab P1000N
ROM » Stock P1000N Gingerbread 2.3.3
KERNEL » Stock P1000N Gingerbread
What I really want to do is to put stock samsung 2.3.6 firmware on my telstra branded S2 (really want to get rid of the bloatware). I have no idea where to get it from as the links on XDA arnt working.
my phone info is this:
PDA: I9100TDVKF4
PHONE: I9100TDVKF2
CSC: I9100TTELKF3
I Have odin but can't find anything else. I have backed up my phone with Kies already.
Anything else I need to do??
Try the S2 thread. This thread is for galaxy s I9000 not I9100.
The device has come no work due to a broken PIT. All through the night trying to find for this model, but nothing came of it. Help me please.