Database Develop

[Q] voodoo fails! Please help

Hello everybody!
I keep getting a voice message saying "converting data partition to optimize extension 4" and then the cell restarts.
I install the voodoo lagfix 5 pre6 on JPK, i'm waiting now for 2 Hours and there is still this voice Message ervery ~ 10 seconds!
I have 70 Apps installed...
Can anyone help me??
thanks,
Alex

No lagfixes work on old froyo. Only jpm and up
Sent from my GT-I9000 using XDA App

Voodoo isn't compatible with JPK. It's mentioned in the documents.
Flash JPO over it, and apply voodoo to that. Or try flashing Chainfire's CF-root kernal over JPK if you want to try salvaging your apps. DISCLAIMER: Not sure what'll happen if you flash CF-root kernal over it. I think you'll loose your apps anyway?

z4mod is compatible with JPK, if you really want to use JPK (not sure why you would?).

Rawat said:
Voodoo isn't compatible with JPK. It's mentioned in the documents.
Flash JPO over it, and apply voodoo to that. Or try flashing Chainfire's CF-root kernal over JPK if you want to try salvaging your apps. DISCLAIMER: Not sure what'll happen if you flash CF-root kernal over it. I think you'll loose your apps anyway?
Click to expand...
Click to collapse
Ok thanks i flashed it again wit CF--root!
Everything works fine again!
thank you

alexng87 said:
Ok thanks i flashed it again wit CF--root!
Everything works fine again!
thank you
Click to expand...
Click to collapse
Go to the newer JPO or JPA, try hardcores kernel over it. THE BEST experience.

voodoo for me?

HI, i know i should i have searched but couldnt find answer to my question. I have stock ROM I9000JPJG8|2.1 on my phone and need to install voodoo lagfix on it. Questions:
1) Is it supported on my phone?
2) Where do i find voodoo file and how to install it on my phone?
Thank you.

Someone please help...i can flash i9000 with ODIN but am completely new to the world of lagfix.

look in the development section, voodoo is for your phone. you just download it and flash thru ODIN/CWM thats all there is to it.

azzledazzle said:
look in the development section, voodoo is for your phone. you just download it and flash thru ODIN/CWM thats all there is to it.
Click to expand...
Click to collapse
Can u direct me the link?

http://forum.xda-developers.com/showthread.php?t=822756 Speedmod Kernel with lagfix
http://forum.xda-developers.com/showthread.php?t=811660 voodoo kernel with lagfix

azzledazzle said:
http://forum.xda-developers.com/showthread.php?t=822756 Speedmod Kernel with lagfix
http://forum.xda-developers.com/showthread.php?t=811660 voodoo kernel with lagfix
Click to expand...
Click to collapse
Thanks for the link azzledazzle, will let you know if i run into any trouble

why dont you update to froyo jpjpg rom its also arabic/urdu then install latest voodoo kernel on it

dadyal said:
why dont you update to froyo jpjpg rom its also arabic/urdu then install latest voodoo kernel on it
Click to expand...
Click to collapse
I could do that but i get no market on arabic froyo...even after factory reset whereas eclair gives me market after factory set. Just one question, what should i select in ODIN when flashing voodoo kernel on my phone?

[Q] Need some help badly please

hi to all ive just rooted my sgs using one click root (at last), i now have superuser installed and rom manager but how the hell do i install the clockwork recovery and hopefully then some type of free lag fix.
Can someone PLEASE PLEASE PLEASE help a noob at this.cheers.madant2011.

madant2011 said:
hi to all ive just rooted my sgs using one click root (at last), i now have superuser installed and rom manager but how the hell do i install the clockwork recovery and hopefully then some type of free lag fix.
Can someone PLEASE PLEASE PLEASE help a noob at this.cheers.madant2011.
Click to expand...
Click to collapse
What firmware do you have?
If gingerbread you can flash the voodoo kernal
http://forum.xda-developers.com/showthread.php?t=975349
This will give you clockwork and will give you an ext4 lagfix

Hopefully Done It Now
I've done it (finally i think),
my kernel version says:
2.6.32.9
[email protected] #Dark_Core_1.0
Build number is: Darky's v9.5.xwjs8
But as i switch the phone on it come up with Darky's v9.4 ?????
Hopefully i will get used to this, if you can could you please let me know if all the info above is right and whats the best rom for 2.2.1?????
Cheers Madant2011.

looks like you installed Darkys rom instead of what you wanted hehe....

rom
when i had rom manager i just downloaded what ever darky's rom that was on there.lol.
Just woundering what is the recomended rom for sgs 2.2.1 ?????
Cheers madant2011

The boot animation for darkys 9.5 does display 9.4 so don't worry about that. The darkys Rom is very good but you could upgrade your kernel to dark core 1.4 or use speedmod k13e kernel
Sent from my GT-I9000 using XDA App

kernel
Just wondering how do i update the kernel to 1.4, i already have voodoo speed mod (I Think).

download it from the darky rom site and if you get the cwm version, just flash it with your recovery

also visit http://forum.xda-developers.com/showthread.php?t=822756 for information on speedmod kernel, that is what i used when on 2.2.1, very fast and good batt life

Thanks
Thanks for all your help. just reading the link and it says it wont work because i used the one click root (I think).
Cheers madant2011

[Q] How to switch from a rom using cm6 to cm7?

Hi all, I recently took the plunge into the world of custom roms and its awesome, so much better then stock
I have flashed my x8 with the Froyo 2.2.1/Cyanogenmod 6.1.3 rom by ponanovn and he has just released a new rom Gingerbread 2.3.5/Cyanogenmod 7.1-Pre using cm7, When I first installed the orginal Froyo 2.2.1 I used x recovery and simply renamed the file to update.zip and simply flashed it and it worked however on his page he doesnt say rename the file to "update,zip" anymore and he says make a back up in "cwm recovery" instead of xrecovery is it neccesary to use cwm recovery with cm7? im just a bit confused if anyone could help me I would be gratefull Thanks

Too complicated! Download and install GingerDX instead. It's a FULLY working Gingerbread 2.3.5!

Chris95X8 said:
Too complicated! Download and install GingerDX instead. It's a FULLY working Gingerbread 2.3.5!
Click to expand...
Click to collapse
Thanks I was having a look at it before and it seemed pretty good, might just make the change to GingerDX, are you using it? if so are there any bugs etc? cheers

Yes, I'm using v005. SO SMOOTH!!! And 3MP camera!! I have no bugs at all. If you have bugs, make a full wipe.

I can recommend GingerDX as well, it is updated on a regular basis, and doixanh is one of the best ROM developers for X8 currently, he just seems to be able to pull things off that noone expected, like the 3mp camera fix for instance!

I agree, GingerDX is the most complete 2.3 Rom. There is updates nearly every day and each update will preserve your data, no major bugs and if there is DX will sort it.

Thanks for the help

I would suggest GingerDX.
But you can try to use multiboot if you have a class 6 or more sd card instead of changing a ROM.

samyeung97hk said:
I would suggest GingerDX.
But you can try to use multiboot if you have a class 6 or more sd card instead of changing a ROM.
Click to expand...
Click to collapse
guys do you have any link to download gingerdx?

edward091810 said:
guys do you have any link to download gingerdx?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1188486
go on this page and download the latest version

Flashing ICS Updates

Hi All,
This will sound a stupid question, i have flashed SpeedMod Kernal (K3-3) how to i go about flashing a ROM also?
I know most ROMS say how to perform but SpeedMod says no CWM or CIN9 roms?
Anyone help.

What I did:
1. Flash Stock ROM 2.3(choose your country from the Stock Rom topic) with Odin 3
2. Root your device
3. Install CWM
4. Install safe ROM (CM9 as example)

Thread moved
DemolitionManHD said:
Hi All,
This will sound a stupid question, i have flashed SpeedMod Kernal (K3-3) how to i go about flashing a ROM also?
I know most ROMS say how to perform but SpeedMod says no CWM or CIN9 roms?
Anyone help.
Click to expand...
Click to collapse
Nothing stupid about the question, but it doesn't belong in Development. I've moved it to Q&A. Please be more careful about where you post

DemolitionManHD said:
Hi All,
This will sound a stupid question, i have flashed SpeedMod Kernal (K3-3) how to i go about flashing a ROM also?
I know most ROMS say how to perform but SpeedMod says no CWM or CIN9 roms?
Anyone help.
Click to expand...
Click to collapse
So what ROM are you on now with the speedmod kernel? Stock ICS?
What ROM do you want to go to?

Currently on latest UK ICS 4.0.3 (Offical) rom from Samsung Kies software. Sorry should have stated before not on 2.3.6 anymore.
Any suggestions?
andreww88 said:
So what ROM are you on now with the speedmod kernel? Stock ICS?
What ROM do you want to go to?
Click to expand...
Click to collapse

DemolitionManHD said:
Currently on latest UK ICS 4.0.3 (Offical) rom from Samsung Kies software. Sorry should have stated before not on 2.3.6 anymore.
Any suggestions?
Click to expand...
Click to collapse
Okay, flash the Speedmod kernel in CWM. This puts you on a safe kernel with stock ICS.
Now, you can flash a CM9 variation of a rom or aokp or one of the other ICS roms that use samsung base.
Edit:
After you flash speedmod, boot up your phone and check settings, about phone, and make sure the kernel is speedmod. Let your phone settle for a little bit, maybe charge if it needs to.