Hello
when i upgrading my PDA2K i've Safely Removed the usb flash memory, then the upgrading [stuck] i tried to reset the device but the screen showing nothing, it looks like it's turned off,
any idea to back my device to the life
thanks
try to Hard reset the device first with the press and hold the power button the camera recorded the same time and then reset, if steps are not helpful try to take the battery + SIM Card from the device and wait a few minutes then replace the battery, insert it into bootloader mode and try to reflash
Dear Hakim
the Device is turned off, when i press the power button, nothing happen
any idea
thanx
What have you checked battery ??
battery is full
Related
Hi After updating to the new rom, the mobile is very very slow and cant recognise the USB. so i cant charge it or go back to the old rom, the battery indicator is allways on charge altough the device is not connected to the usb or the power, and when going to status, it says battery unknown, can anyone please help, i cant use the phone.
Same problems here ... solution is here: http://forum.xda-developers.com/viewtopic.php?t=47848
Downgrade, unlock and upgrade back to the ROM you want.
klavier said:
Hi After updating to the new rom, the mobile is very very slow and cant recognise the USB. so i cant charge it or go back to the old rom, the battery indicator is allways on charge altough the device is not connected to the usb or the power, and when going to status, it says battery unknown, can anyone please help, i cant use the phone.
Click to expand...
Click to collapse
The solution is easy. First charge the battery conecting the device in Boothloader mode (press and hold camera buton and press power). Conect the usb cable in bootloader mode and instal the ROM you want.
good luck
Can some one explain the steps to get in to bootloader mode or usb mode. I have the same problem with my MDA. I need to get a usb mode to update the ROM. the battery says unknown and as it turns on its messing the GSM rom so no calls can be made out. The charging icon is always on, and I'd hate to have a $500 paper weight on my desk
thanks,
Adam
To go to bootloader hold camera button down (don't release it) then press the reset button with stylus (don't release camera button) then release reset button . When you have a tricolor screen then you can release the camera button. You're in bootloader mode.
Hello.
my diamond keeps reset, when i turn it on it start and just when the Home screen appears, after 15sec, it reset and start over.
when it reset, i press the "end call" and it make reset again.
i manage to enter to boot loader, and i flash the latest HTC (2.03) ROM,
after the flash, the unit WORKED for about 10h, but just after i took out the
battery and put it back the resets started again.
any help will be appreciated.
thanks.
some more info ...
i notice that, after HR, when the device is powered it can worked for hours...
when i disconnect it from power, just as the battery is down to 50% (approx) it start to loop-boot...
until i plug it back to power, let it charge and turn it back on.
PROBLEM SOLVED, LOOK BELOW...
----------------------------------------------
Hello,
I was using my phone without any problems. I had no problems but I wanted to restart the device to free memory. I hold down the power button, and "slide to reset". The phone turned off properly but it was strange that even after a while there was nothing on screen. So I pulled the battery out, replaced. When I hold down power button the phone vibrates but never starts up! nothing on screen!
I tried to hard reset with holding 2 silver buttons with power, no way. I tried to get to ROM flash screen by holding volume down and power, no way. I even pressed reset, power, volume down no way. Everytime it gives a vibration but no way, there is nothing on screen.
I'm using energy ROM with hard-spl sd card update method.
Any suggestions that how can I see something on screen?????
Tarik
-----------
AFTER FEW DAYS TAKING THE PHONE AND BATTERY APART AND LEFT IT ALONE WITHOUT BATTERY:
Hey, it has been days and days, I retried many times but nothing changed.
I removed the battery, put the phone away somewhere and I thought that if I find a free time, I will send it to service.
Today I would send it to service but before that I wanted to try, i placed the battery back and wow it worked!!!!
There is some possibility you didn't brick the phone just killed or heavily discharged your battery. X1 could miscalculate the charge level and not inform you in time.
Plug-in a wall charger and pay attention to diode signals. Also verify is when pressing Power button you can see red flashes of diode from inside the button?
If you see those flashes your battery need to be charged. It may take up to few hours!
thank you for trying to provide me a solution.
The battery was full when this happened.. I even left it on the charge for hours.. Even I take the battery out and replace, and plug it in the charge directly, the diods don't light up... If it is a software caused situation, is there a way to ultra hard reset or flash it somehow without booting?
ozkantarik said:
thank you for trying to provide me a solution.
The battery was full when this happened.. I even left it on the charge for hours.. Even I take the battery out and replace, and plug it in the charge directly, the diods don't light up... If it is a software caused situation, is there a way to ultra hard reset or flash it somehow without booting?
Click to expand...
Click to collapse
Get a memory card with a KOVSIMG.nbh file on it...try flashing it, also, if u can change the battery also..PM me if u want more help....
Yes i placed a kovsimg.nbh but no way I can not see rainbow colors on screen, I can see nothing on screen though..
it is not a battery issue.. on power up it vibrates but no light on LED or screen..
any more help? is there a software that sony service use to recover from these situations?
ozkantarik said:
Yes i placed a kovsimg.nbh but no way I can not see rainbow colors on screen, I can see nothing on screen though..
it is not a battery issue.. on power up it vibrates but no light on LED or screen..
any more help? is there a software that sony service use to recover from these situations?
Click to expand...
Click to collapse
You didnt read my post properly. I said, get ANOTHER mem card with a KOVSIMG.nbh....NOT ur own..change the MEM CARD AND Battery.....
----SOLVED----!!!!
Hey, it has been days and days, I retried many times but nothing changed.
I removed the battery, put the phone away somewhere and I thought that if I find a free time, I will send it to service.
Today I would send it to service but before that I wanted to try, i placed the battery back and wow it worked!!!!
If u have poor battery life, try booting into bootloader (tri color screen) mode by pressing turning off the phone, pressing the power button and vol down buttons together. Then charge the phone for a while under this mode.
Restart the phone by holding the power button If can't restart , pull out the battery and put it back again and turn on the phone.
Tested on nodo with the latest July firmware update.
My take is that somehow it wipes the battery stats and rebuilds it from scratch.
is it by connecting to power source or our pc/laptop.
Ttblondey said:
is it by connecting to power source or our pc/laptop.
Click to expand...
Click to collapse
power source...
Can't see that orange led lights when i connect charger while my hd7 is in bootloader mode...
The phone does not charge in this mode, thats why you must have at least 50% battery when you need to flash roms.
Hello. This morning I've turned off the alarm, turned on WIFI and went back to sleep. I can't tell for sure, but I think the battery was low. During the next 2 hours I checked the time several times. I don't remember accepting any OTA. Eventually I got up, tried to check the time and the phone was off. I tried to turn it on, no effect. No matter how many times and for how long I pressed and held the power button, the green LED only flashed for a split second and that's all. I plugged in the charger, and the LED stayed lit -but- there was this barely noticeable flickering. Charged it for about 30, 60, 120 minutes, didn't start plugged or unplugged. I went to work, 8 hours later (phone was unplugged) I tried to turn it on again, this time the LED doesn't even flash, but when charging there is no flickering. No combination of buttons works. Windows doesn't find the device, neither does RSD.
I've never done anything 'custom' to the phone. The last change I made was setting the alarm to turn off by shaking (yesterday, never used this option before).
Is it dead?
Try taking SD card out and holding Vol down and then Power for 20 secs, then let go of Power,
Already done that, nothing. No matter how long I charge it now, after unplugging and pressing power button the LED doesn't even flash. Could it be a battery problem (before its death, it would last for a day)? Is there any way of recovering my data without buying a new one?
Try opening and disconnect battery for a bit.
I'll do that as a last resort, on weekend maybe since I don't have the tools with me. Any other clues?
Nobody knows how to help me?
I'm going to make a factory cable. Will this alone allow me to recover the data? Or if I'll be able to flash the phone, can I recover the data afterwards?
Also, I'm not sure if I understand correctly: does the factory cable recharge the battery or not? Is there a way to recharge it when removed from the phone?
Try to use medfield unbrick script. If You have only green led it seems to be bootloader error so this script should bring Your phone to life or Your phone has broken emmc and You can start looking for a new logic board. Good luck.
I've installed the drivers, but Windows and XFSTK don't recognize my device at all. Factory cable also didn't help. I liked my phone very much. :angel:
Did You enter medfield mode using combination with camera button??
By a combination you mean holding the camera button and connecting the phone to a pc? I tried that.
Disassembe Your phone, pull out battery, push power button for a 10 sec, plug in battery, push camera button and connect USB. If it wont help You I don't see any hope for Your phone.
Well, new option to try is a new hope. I'll try that on the weekend. Could you please be more specific:
1. Pull out the battery.
2. Press the power button and wait 10 seconds.
3. Insert the battery: should I be still holding the power button at this moment?
4. Press the camera button.
5. Plug in the usb cable (factory? regular?) - should I be still holding the power and camera buttons?
Battery trick is only to discharge capacitors. Sometimes even phone is dead it can turn on in some strange mode and then You can't boot it to flash. Thats why You need to pull out battery, push power for a few sec to completely discharge motherboard and just release this button. After that You can just plug in battery and continue normal unbrick process - so hold camera button only and connect regular usb cable.
You can also try reset option instead of pulling battery out. To do that do not disassemble Your phone but just plug in regular USB, when phone starts (green led) hold power and vol- until green led goes off and then quickly start holding only camera button.
I have no more ideas.
Ok, I've tried everything. Nothing brought my phone back to life.
Thanks for all your help.