Hi guys..
I have the last version of miui rom on my galaxy s phone, and now I want to install
galnet rom instead of miui.
can I do it only by useing the zip file in the CMW?
do I have to wipe the phone?
thank for help
It worked for me. Just wipe the dalvik cache and cache before you flash (leave data alone). I assume you have v 4.x now?
Related
Hi everyone,
Newbie posting here.. I've had my share of flashing Roms a few times (say 4 or 5 times) but i stuck with cm 7.2 when they released the stable mod for the i9000.
Now i see that the cm9 stable mod has been released and i definitely want to try that out however, I'm not sure on how to go about it and I don't want to do anything stupid. Don't get me wrong, i've tried reading around through different sites and forums but all the mix and match methods of flashing and installing has gotten me confused..
My main question is, how do i flash to cm9 from cm 7.2? naturally i have cwm installed and can boot into cwm recovery. Am on the XXJVK baseband with the pawitp kernel. Not sure if i have to donwload new drivers (since the base ROM is going to change)...
Do i just place the zip file for the cm9 mod in the internal sd storage? could you guys help me out and let me know if this process is correct:
1) save zip file in internal storage (both cm9 and gapps)
2) do a nandroid backup
3) boot into recovery
4) wipe data and dalvik cache
5) install the package
6) wipe data and dalvik cache
7) install gapps
8) reboot
Once it boots up, i'm assuming it'll be running cm9 already.. could you guys help me out and let me know if this procedure's correct? sorry for the noob question but i'd rather just make sure and ask you guys first.
thanks in advance guys! cheers and more power!
ablack01 said:
Hi everyone,
Newbie posting here.. I've had my share of flashing Roms a few times (say 4 or 5 times) but i stuck with cm 7.2 when they released the stable mod for the i9000.
Now i see that the cm9 stable mod has been released and i definitely want to try that out however, I'm not sure on how to go about it and I don't want to do anything stupid. Don't get me wrong, i've tried reading around through different sites and forums but all the mix and match methods of flashing and installing has gotten me confused..
My main question is, how do i flash to cm9 from cm 7.2? naturally i have cwm installed and can boot into cwm recovery. Am on the XXJVK baseband with the pawitp kernel. Not sure if i have to donwload new drivers (since the base ROM is going to change)...
Do i just place the zip file for the cm9 mod in the internal sd storage? could you guys help me out and let me know if this process is correct:
1) save zip file in internal storage (both cm9 and gapps)
2) do a nandroid backup
3) boot into recovery
4) wipe data and dalvik cache
5) install the package
6) wipe data and dalvik cache
7) install gapps
8) reboot
Once it boots up, i'm assuming it'll be running cm9 already.. could you guys help me out and let me know if this procedure's correct? sorry for the noob question but i'd rather just make sure and ask you guys first.
thanks in advance guys! cheers and more power!
Click to expand...
Click to collapse
wipe date
wipe cache
wipe delvik cache
then flash rom nd gapps
wipe cache nd delvik cache again.. good luck..
Best and most reliable way to do this is flashing through stock rom via Odin. Then flashing kernel with CWM Recovery via Odin. And only then flash CM9 via CWM.
thanks for the quick reply guys. will try it out tonight and update this post. hope all goes well.
cheers!
bmwchampz said:
wipe date
wipe cache
wipe delvik cache
then flash rom nd gapps
wipe cache nd delvik cache again.. good luck..
Click to expand...
Click to collapse
and if u want u can try chimera rom from team passion.. it s combination of cm9 and AOKP.. It s stable and fast..
took me less than 10 minutes to flash to cm9 and it's as snappy as i thought it was. now to fix up everything and check if everything's okay.
so far, wifi and network signal are working fine and dandy. might just have a go at that chimera rom.
Hi all .. First thx for the Amazing Forum
Well I installed the AOKP rom on my galaxy mini everey things went right until rebooting the system
the phone stay repeating the bootanimation without turning ON
Plz Help Me I'm n**b
Go to cwm, wipe cache and dalvik, reboot. If it doesn't help reflash ROM or restore backup.
yackovsky said:
Go to cwm, wipe cache and dalvik, reboot. If it doesn't help reflash ROM or restore backup.
Click to expand...
Click to collapse
I tried to wipe cache and dalvik .. didn't work
i'll try to flash it to android 2.3.6 by odin & reinstall the aokp rom
thx for reply
still having the same problem
Err... you don't need to flash stock ROM again... just do a clean install of aokp... or any other ROM if it gives you trouble
yackovsky said:
Err... you don't need to flash stock ROM again... just do a clean install of aokp... or any other ROM if it gives you trouble
Click to expand...
Click to collapse
I installed CM10 .. thx for help ... i think there is a problem in the new version of AOKP
There's no problem for me are you sure you've got the latest?
you wiped cache and dalvik cache
but you will also need to wipe data
dheeraj (dhlalit11) said:
you wiped cache and dalvik cache
but you will also need to wipe data
Click to expand...
Click to collapse
I try it too But Still having the problm
Anyway Thx all I installed the cm10 now and it worked pretty cool
Hi all i have a problem with install rom.
I have a upgraded kernel thunder zap reloaded 3.5. Try to install rom Supressed Rom v 3.0. When i install the rom my phone stuck. I try to install any rom like Supressed Jelly Bean or OmegaRom X. All installation is stuck. Now my phone is frozzen no rom. Only CWM is work. Any idea how to start the phone.
Sry for my english.
saphiel said:
Hi all i have a problem with install rom.
I have a upgraded kernel thunder zap reloaded 3.5. Try to install rom Supressed Rom v 3.0. When i install the rom my phone stuck. I try to install any rom like Supressed Jelly Bean or OmegaRom X. All installation is stuck. Now my phone is frozzen no rom. Only CWM is work. Any idea how to start the phone.
Sry for my english.
Click to expand...
Click to collapse
I think you are trying to install GB roms... Supressed Rom 3.0 is for GB Look for roms with (JB) in front only. You may have to reflash with odin your JB rom if this is the case.
bobfrantic said:
I think you are trying to install GB roms... Supressed Rom 3.0 is for GB Look for roms with (JB) in front only. You may have to reflash with odin your JB rom if this is the case.
Click to expand...
Click to collapse
Yes you have right. Only reflash on odin is work. THX :victory:
saphiel said:
Yes you have right. Only reflash on odin is work. THX :victory:
Click to expand...
Click to collapse
you are welcome, go ahead and click the thanks button(s) lol
i have the same problem supressed rom based on JB ... then i reinstall JB via odin then try again to install chucky-bean master rom and again it's stuck on logo samsung galaxy s GT-I9070 no boot animation working nothing ... only recovery mod i tested that with thunderzap 3.5 kernel ...
Brocky2011 said:
i have the same problem supressed rom based on JB ... then i reinstall JB via odin then try again to install chucky-bean master rom and again it's stuck on logo samsung galaxy s GT-I9070 no boot animation working nothing ... only recovery mod i tested that with thunderzap 3.5 kernel ...
Click to expand...
Click to collapse
Wipe cache, dalvik cache and do factory reset in CWM.
First thing before i install the custom rom was doing the next steps:
-format system
-format cache
-format data
-wipe data/ factory reset
-wipe chache
-wipre dalvik
then i select chucky-bean master rom
then i do again wipe chache and wipre dalvik
then reboot and after reboot it was stuck ...
Just flashed Supressed Jelly Bean build 3 Rom with CWM 6.0.1.5 prom shaaan ( just put the update.zip into sdcard then install it from CWM) and it works so you can try now i hope i helped you
hey guys,
which is the best method to clean your phone before flashing a new rom, or maybe bringing your phone to the state it was just after flashing a new rom. i tried data factory reset, wipe cache , wipe dalvik with kernels we have here and i found remainents of zip files i had flashed after setting up my rom and using newer mods. i dont want to format system, preload all the time.
which is your perfect, effective method ? speedmod kernel and its recovery or phillz , then which version ?
thanks
rraaka said:
hey guys,
which is the best method to clean your phone before flashing a new rom, or maybe bringing your phone to the state it was just after flashing a new rom. i tried data factory reset, wipe cache , wipe dalvik with kernels we have here and i found remainents of zip files i had flashed after setting up my rom and using newer mods. i dont want to format system, preload all the time.
which is your perfect, effective method ? speedmod kernel and its recovery or phillz , then which version ?
thanks
Click to expand...
Click to collapse
why you dont want format system and preload before flashing rom?
what I do before flashing any rom is:
flash philz kernel
wipe data / cache / dalvkk cache
format / cache / system / data / preload
and then flash new rom
and thats it, with this procedure I have never faced any issue with any rom I have flashed.
usualy I use this method even befoe restoring my nandroid backup.
above methods I using with philz and speedmod, but i prefer philz when wiping and flashing and making backup, because it has nice cwm for doing that. but after I flash new rom I immediatly flash speedmod because it is the better than philz if you drive your new rom, and you are not in cwm at the moment
hope this helped
Sent from my GT-N7000 using xda app-developers app
completely agree with you djoni, but when you are flashing continuously, experimenting a lot ...you know ...this and that,
isnt a data factory reset , wipe cache, wipe dalvik supposed to bring you to that condition just after booting up after a new rom flash ? why were there remanents from a mod i had flashed after using the rom for some time ?
I have a Galaxy S GT-i9000 with a baseband of I9000ZWJV4 and MIUI software.
I would like to remove the existing MIUI software and do a clean install of the latest Jelly Bean OS.
The more how-to guides I read, the more confused I get.
I would like to know if I do ;
Wipe data/factory reset
Wipe cache
Advanced > wipe dalvik cache
does this clean my phone of the MIUI software now installed on my phone?
Why does some programming guides say to use a pit file and some do not.
Some guides use PIT, PDA, Phone and CSC files and some do not.
Can I just "Wipe" my phone and install 4.3 Jelly Bean
or do I have to install and upgrade,
2.1 Eclair
2.3 Gingerbread
4.0 ICS
4.3 JellyBean
in that order?
When programming, does the Rom and gapps .zip files go on the phone' sd-card?
I would appreciate it very much if someone would help me install
4.3 Jelly Bean or the latest Jelly Bean on my Galaxy S GT-i9000.
Also what is the most popular Rom for the Galaxy S GT-i9000.
Thank You
No, just install lastest version of official gingerbread, find the cf root compatibile version, then go in recovery wipe data and install your jellybean(except slimbean, its buggy when installing from stock) (when flashing, it will reboot! Dont panic just use vol up+power+home, release when Samsung show up, you will booted in recovery, flash ROM again and reboot) you are done
To install jellybean firmware..
You will need to root the phone first. install cwm recovery, reboot into recovery mode wipe data/factory reset wipe cache wipe dalvik cache format data format data data format cache format system & flash zip files.
Reboot & enjoy...
# sent from a blazing slim SGSi9000 using tapatalk 2 #
Thank You