Hi guys, my phone had the 10.1 darkys rom installed and all was well. a week later and the phone started to shut itself off randomly so i went back to factory and then reinstalled rom after flashing kernel ect. but my external sd card is not recognized..... so i think that this may have been the random reboot problem {had most apps on sd} so i took card out, put it in computer and no problems at all, all files were still on there and were all readable and writable..... so what could have caused this and how can i fix it? i have not had water get into the phone that i know of and this was the only thing i could think of...... any help appreciated!! p.s. i tried another working sd card and same problem. even when mounting to computer.... nothing.
It could be that your internal SD card is corrupted. If you can back everything up, then do so and I would flash a stock Froyo or Gingerbread rom to see if that fixes the problem.
If you still encounter issues, then your phone may have to visit a repair centre.
holdz said:
It could be that your internal SD card is corrupted. If you can back everything up, then do so and I would flash a stock Froyo or Gingerbread rom to see if that fixes the problem.
If you still encounter issues, then your phone may have to visit a repair centre.
Click to expand...
Click to collapse
The other problem i have encountered is when trying to install darkys rom again, but this time from internal sd, it goes through the motions but then when it reboots rom is not installed and my back and home button dont work, so i go back to what it was and that fixes it. ill try flashing back to bog stock and see if i can get my sd card back. will that remover cwm as well because if i take itback to shop i want that gone..... cheers
Flashing back to a stock rom will remove CWM and put you back on Samsung's Recovery 3e.
Related
Ive got a big problem, recently my old SD card **** out so i replaced it with a brand new one with nothing on it. Upon first boot nothing was loaded because obviously APP2SD puts everything on the SDCard, however not even market was loaded on the phone itself so it was impossible to even download anything
Now the big issue!!
In my stupidness i thought i would just wipe and reflash a new CM with the new SD card and see if that fixed everything.. However i wiped and then i realized i didnt have a new ROM on my SD card to flash back too!! so now when my phone boots it just boots to a black screen and nothing appears because there is no rom to run... my phone itself is wiped data/cache and my SD card is completely clean due to it being a brand new one
How can i get my phone working again? right now it is INOP as i dont have any rom on it whatsoever and it wont even boot, i dont have a microSD adaptor to put it on my computer with and load a rom on it
is there some failsafe way to get it back to stock firmware incase something like this happens?
This should be in the Q&A section.
But,
What recovery do you have?
[edit]
oh right, drop into terminal Alt+x, type ums_enable and connect your phone through usb and copy over the rom and Amon Ra's latest recovery.
Joe92T said:
Ive got a big problem, recently my old SD card **** out so i replaced it with a brand new one with nothing on it. Upon first boot nothing was loaded because obviously APP2SD puts everything on the SDCard, however not even market was loaded on the phone itself so it was impossible to even download anything
Now the big issue!!
In my stupidness i thought i would just wipe and reflash a new CM with the new SD card and see if that fixed everything.. However i wiped and then i realized i didnt have a new ROM on my SD card to flash back too!! so now when my phone boots it just boots to a black screen and nothing appears because there is no rom to run... my phone itself is wiped data/cache and my SD card is completely clean due to it being a brand new one
How can i get my phone working again? right now it is INOP as i dont have any rom on it whatsoever and it wont even boot, i dont have a microSD adaptor to put it on my computer with and load a rom on it
is there some failsafe way to get it back to stock firmware incase something like this happens?
Click to expand...
Click to collapse
You could try posting in the right section.... or you could go to recovery, drop to console and type ums_enable- then connect your phone and move a rom over
Joe92T said:
Ive got a big problem, recently my old SD card **** out so i replaced it with a brand new one with nothing on it. Upon first boot nothing was loaded because obviously APP2SD puts everything on the SDCard, however not even market was loaded on the phone itself so it was impossible to even download anything
Now the big issue!!
In my stupidness i thought i would just wipe and reflash a new CM with the new SD card and see if that fixed everything.. However i wiped and then i realized i didnt have a new ROM on my SD card to flash back too!! so now when my phone boots it just boots to a black screen and nothing appears because there is no rom to run... my phone itself is wiped data/cache and my SD card is completely clean due to it being a brand new one
How can i get my phone working again? right now it is INOP as i dont have any rom on it whatsoever and it wont even boot, i dont have a microSD adaptor to put it on my computer with and load a rom on it
is there some failsafe way to get it back to stock firmware incase something like this happens?
Click to expand...
Click to collapse
Go buy an sd reader. Or if you have aman ras recovery you can set it to go to usb fro the recovery menu.
first - wrong section
second, if you have a custom recovery - go to the shell and type
ums_enable with usb plugged in
inop
You need a card reader and the ra dream recovery and you would of fixed it
Wow all of you said the same thing?
And repeated it
Even ^ copied the rest of you by saying got rec mode.
ur first card prooly didnt go bad, u prolly didnt flash the ext-fix from cm..correct? thats what happened to me and i then realized my sd was fine, i was also stuck at the g1 screen b4 i flashed the fix. also from what i read all u did was wipe so ur rom is still there, see if u can grab the old card and getter dun. and stop being a jackass and post this where it goes!!
Post in the correct section, next time, please.
Moved.
Hello eveyone
3 weeks ago I got back my GT-I9000M from repair by Samsung.
Last week I've rooted my phone and installed Darky 6.0 on my GT-I9000M from Bell.
After a day and half I've successfully did it. Everything was fine. Then on Dec 25th I've upgrated to Darky 7.0. Again everything went fine.
Tonight (Dec 28th), my phone said my Sim was removed and I must reboot to enable it again. (didn't touch the phone at all....never touched the sim). Anyway I rebooted the phone and things was fine again.
Then while surfing on XDA I saw Darky 7.5 was out. I've started to Download it via wifi. When the download was between 30%-50%, screen went blank and button light was on.....Rebooted and PHONE STARTED TO LOOP....
I've tried to:
Rebood 2-3 times (not working)
Clear cache (not working)
Factory Reset (not Working)
Re-Install Darky From SD-Card (Got the error message on SD-Card)
Flash with odin to 2.1 stock firmware from bell
(worked but freeze after boot animation so still not working)
Flash with Odin to Latest 2.2 Stock firmware from Bell
(worked but freeze after boot animation so still not working)
So Now at least it look as an un-rooted phone with bricked software while upgrading.....wish that if can't fix it samsung will repair it.....
AS OF TODAY, IS THERE ANYONE WHO SUCCESSFULLY FIXED A CORRUPTED BELL'S INTERNAL SDCARD?
One of the boring thing is that I won this phone with Samsung's Mob!lers contest this last summer...we were asked to promote the phone as the best Android phone on the market...the one i have is my 3rd replacement....
check out the SGS wiki, there is a topic on how to fix corrupted internal SD
but only works for corrupted SD, not hardware dead SD
My system still boot up.
I Mean it can go in recovery mod
and download mod
The thing boot but when i was using CWM It was saying the .Can't mount E:/.....
AllGamer said:
check out the SGS wiki, there is a topic on how to fix corrupted internal SD
but only works for corrupted SD, not hardware dead SD
Click to expand...
Click to collapse
Can't find SGS Wiki can you post a link please
Teranox said:
Can't find SGS Wiki can you post a link please
Click to expand...
Click to collapse
I found this http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series
but can't find any Corrupted Memory Fix
Hi i have a bell galaxy s i just flash ugkc1 firmware but when the phone boots i get force close message for almost every app.
i think the internal sd might be corrupted tried to format it but all files are still there
any idea ??
thank you
your SD card usually nothing to do with application force close, those files which you see after formatting on SD card should be there so do not worry about them.
if you want to find the reason explain about your previous rom and kernel. did you do a factory reset or wipe before and after rom installation?
Here is two simalar topics. I also have that problem and cannot solve it yet.
http://forum.xda-developers.com/showthread.php?t=1076101
http://forum.xda-developers.com/showthread.php?t=1069867
When i looked in internet i found sth similar for HTC, but devs corrected it. They parted some files from working devices and pushed it to system with adb.
http://forum.cyanogenmod.com/topic/6433-solved-messed-up-partitions-on-internal-storage/
Maybe sth like that will also solve our problem but we need help.
If you find any sollution please infrom us. Maybe it will be useful for us too.
Regards
thanks for your replies
all this strated when i updated to 2.3 with kies using spooffw upgrade went fine but phone didn't boot it was stuck on the first boot screen,
so i flashed back to 2.2 and here i am ..
Did you try booting twice or did you jump the gun flashing back? My phone appeared to be stuck during the first boot screen on the first time starting 2.3.3.
garbz said:
Did you try booting twice or did you jump the gun flashing back? My phone appeared to be stuck during the first boot screen on the first time starting 2.3.3.
Click to expand...
Click to collapse
i tried booting twice it ddn't work recovry mode didn't work either
now im back on froyo i still can use the phone but only as a phone all apps fail to start and i get force close message
flashed my phote to 2.3 (jvk) ans i installed speed mod... still the same
im pretty sure its an internal sd failure. is there any way to fix this ? i bought my phone some guy on kijiji so i don't think i have any warranty..
thank you
biscuit26 said:
flashed my phote to 2.3 (jvk) ans i installed speed mod... still the same
im pretty sure its an internal sd failure. is there any way to fix this ? i bought my phone some guy on kijiji so i don't think i have any warranty..
thank you
Click to expand...
Click to collapse
I doubt it is an SD problem. Go to recovery, clear cache and dalvik and fix permissions. If the problem persists to a factory reset and reinstall your apps from the market.
Sent from my GT-I9000 using XDA Premium App
thanks again for tryin to help i already tried this but didnt work
Edit :
flashed back to stock 2.2.. now i get ''blank internal sd'' on the notification bar. phone doesn't seem to detect internal sd card is this a hardware or software problem ?
thanks
now i flashed sppedmode kernel phone seems to be running a little better ( less force closes messages) but i still can't delete files or format my sd card
any idea ?
I tried to flash darky 9.2 (odin version). Then i reach with ADB to the internal when it is in CWM. I pushed there some custom roms and flashed with CWM. But it did not help either.
isn't there any way to fix a corrupted sd card ?
I was in the process of recovering my Captivate - that I had upgraded to Gingerbread - from a corrupted OS. I was able to factory reset back and get the phone running again. While on this forum and getting help resolving that issue, I thought I would see how stable the new 4.2's were. I was walking through the steps of the update and I had just finished flashing CWM with Odin and then it all fell apart.
<<< Noob alert>>> When reading the posts and the walk-throughs, I always read SD Card as the mini-SD card that you add to the phone - the external card. Therefore I put the new custom rom on the external SD.
I wiped the data and went to apply the new rom from zip, and (of course) I couldn't find it. After several tries, I realized my problem. However, my Captivate will not mount my external SD. It is the same one that was in the phone and has been working. I formatted it and checked it for errors - none - but the phone will not mount it. I cannot get access back to the internal SD memory to put the ROMs there - when I turn on the phone is gets to a black screen that says "Galaxy S sgh-1897" and sits there - and my computer does not recognize the phone when I plug it in to the USB.
What can I do? Do you have any ideas?
ktvanhorne said:
I was in the process of recovering my Captivate - that I had upgraded to Gingerbread - from a corrupted OS. I was able to factory reset back and get the phone running again. While on this forum and getting help resolving that issue, I thought I would see how stable the new 4.2's were. I was walking through the steps of the update and I had just finished flashing CWM with Odin and then it all fell apart.
<<< Noob alert>>> When reading the posts and the walk-throughs, I always read SD Card as the mini-SD card that you add to the phone - the external card. Therefore I put the new custom rom on the external SD.
I wiped the data and went to apply the new rom from zip, and (of course) I couldn't find it. After several tries, I realized my problem. However, my Captivate will not mount my external SD. It is the same one that was in the phone and has been working. I formatted it and checked it for errors - none - but the phone will not mount it. I cannot get access back to the internal SD memory to put the ROMs there - when I turn on the phone is gets to a black screen that says "Galaxy S sgh-1897" and sits there - and my computer does not recognize the phone when I plug it in to the USB.
What can I do? Do you have any ideas?
Click to expand...
Click to collapse
Here's a good start to get your pc to recognize your phone: http://forum.xda-developers.com/showthread.php?t=1953930
From there, flash Odin KK4 without bootloaders in download mode to get your phone back up. I believe to know the steps to flashing a custom ROM
GL!
got it going
Thanks, it's up and running, but I went back to speedmod and tried to update from SD - and it worked, but didn't like the ROM. I'm trying a different ROM to see what the issue is.
Thanks for the help.
ktvanhorne said:
Thanks, it's up and running, but I went back to speedmod and tried to update from SD - and it worked, but didn't like the ROM. I'm trying a different ROM to see what the issue is.
Thanks for the help.
Click to expand...
Click to collapse
You'll have to flash the ROM twice to get past the partition on JB coming from GB.
Sent from my SGH-I747 using xda app-developers app
Hey,
Been trying to reset the tab to factory defaults the tab does his mojo untill it reboots into android 2.3.6 and then everything is still on the internal SD card.
Then i went to hook it up on the pc tried manually deleting everything on the internal SD pc say's its done i look in the tab and its all still there.
Tried copy'ing files over to the SD card but does not wanne stay on it.
Ok now then i went on booting odin up and rooted it + cwm recovery on it it does it like a charm and works can boot into the recovery.
Now since i cant hold any roms on the internal sd card i went on using an external sd card put on cm 10.2 and gapps,
Installed the rom then reboots into a newer version of cwm and it tells me its not rooted.
ok fine i restarted the tab and went back into recovery then it was rooted.
Went on to install the cm 10.2 and gapps now its hanging at the cm logo on boot
So i went on to flash dbdata.rfs.tar wich normally gets me passed a bootloop.
This time however it dident work.
Anybody has any ideas i can still try to get it to work ?
I think its more of a lock on the internal SD card since it can't hold any files nor delete's anything but im not sure hopefully some1 with some more experience then me can help me further on this problem
Thx
Not locked. The internal SD chip is failing.
You will see many post that has symptoms such as: previous owner info cannot be removed. New data cannot be saved. Wiping failed.
My mind was vaguely thinking that but still hoping it wasent