Related
I have a XDA II here, It was work fine, but after I tap a file in the Windows folder, then my XDA softreset itself, after the XDA can still turn on, all button is functional, but just problem to tapping on screen, when tap on screen it has on repond (the screen is on).
I also tried hard reset but all data is still here, weird?? I though hard reset will let me go back to the default setting, but it doesn't change anything except the clock go back to Sept 2003.
PH10B
Radio 1.10.00
G 1337.18
D 1.60a00WWE
my problem with the screen is that it can not be alligned, everytime i try the cross goes round and round and it simply wont start. i have tried at least 6 different roms hard reset but problem remains :x :x
I NEED HEPL GRAHHHHHHHHHHH
PDA2 same problem
Hi All,
I have a PDA2 and for some reason tapping on screen stopped working, I tried hard reset too but I cant tap on the screen anymore. Kindly help. PDA is in super shape I have also upgraded it with the latest patch from clubimate but cant tap the screen.
Nothing is broken and it happened while I was typing a note. Pls Pls help
Qamar Bukhari
[email protected]
we should create a club and name it the fellows with the x-screens :x :x :x
Hey guys do something, where are the experts ??? I am sure its just software problem, I installed some software and next morning touchscreen was not working. I didnt dropt the pda.
Qbukhari.
Just a thought, try putting the device into bootloader mode then hard resetting the device.
Also try putting it into bootloader mode, updating the complete ORIGINAL rom and hard reset to complete the install.
Bootloader mode = power button + reset button + action button right ???
I have done so, problem still there
I have replaced the ROM downloaded from clubimate ----- problem still there
I have also tried to replace the XDAII rom ------ problem still there
now tell me where to get the ORIGINAL ROM ??? I am sure if the original rom is inserted it will be working again. btw pug can we talk online ? I am online now
[email protected] (msn messenger)
qbukhari.
hey all, I finally solve this problem, in the hard reset screen, there is menu for me to choose what to do in during the hard reset, like clear storage, registry... and i choose to clear all, then my XDA II is now work fine. (in the hardreset menu the backlight will not on, so it is not visible to find out the menu, also to change the setting use the botton of record, camera & volume button to control the menu.) good luck everyone!!
Thats a relief
Hi kindly tell me how to find that menu ?? I am sure I didnt damage my Alpine its just software problem let me fix it too.
Tell me how to find that menu during a hard reset plsssssssss
qbukhari.
WHERE IS THAT MENU??????????????
Menu ????
Still waiting for a reply, kindly tell me how to access "Clear Storage" function during the Hard Reset
qbukhari.
probably fake trying to make impression :?:
Too Sad
Dear Kabintos,
When you go in the setting/memory it is displayed total 122mb main memory in my PDA2 is this the same situation with you too ?
qbukharil.
The bootloader menu is not, as far as I'm aware, on the Alpine as it automatically detects network frequencies etc. Henrypak mentions XDA II not XDA IIi.
The program memory and so on in the Memory tab is only 122.04MB. Memory is quoted different to how most people think. 128000000 / 1024 / 1024 = 122.0703
The .03MB is taken up with partitioning of the memory to allow for storage etc.
Have a look at the hard drives on your computer for example, a 30GB hard drive is only 27.9GB. It's just how the manufacturers quote storage space, in thousands of bytes. Computers work them out in thousand and twenty fours of bytes.
To be honest Qamar, the more I think about your problem, the more I think it is a hardware issue, not software. If you've recently purchased the Alpine, it will still be under warranty and you should be able to take it back for an exchange. If not try opening it up and removing and reconnecting the ribbon cable for the screen from the mother board.
Obviously you've tried flashing it again, if the touchpad isn't working then you can't get past the screen alignment at the beginning of the ROM installation after a hard reset.
Out of curiosity, if the touch screen isn't working, how did you get to see the Memory status on your Alpine? None of the buttons are defaulted to settings or the start menu.
PDA2 live again
Hi All,
Well well well, here I am back in the game again. It was at the last moments when I was almost ready to send my Alpine for repairs when I got tip from a friend from uk. He sent me a tool to format storage completely.
After reseting the Alpine with reformatted storage the touch screen was back a bit misaligned though, after aligning it once its 100% fit now. How can I thank you my friend ???
Cheeeeeeeeeeeeeeeeers !!!!!!!!!!
qbukhari.
gbukhari pls send it to me m8 pls pls and ill thank you as you were thanking your firend that send it that to you :lol: also i wanted to ask you if you test really hard your machine after that in case it would do the same thing again
my email [email protected]
Can someone post a 100% tried and tested solution to the tapping problem?
TIA
Yeah...!
Can someone please post some instruction on sortingthis issuse out....
Lossing sleep over the thought of having to replace my screen.....
Cheers,
-R
Hi everyone,
I had exactly the same issue with my XDA2i about a week after I purchased it (around 3 months ago). I was happily browsing the web over wifi around a friends house when the screen locked. I had to hard-reset to get it up again but it got stuck in a loop whilst aligning the screen, it wouldn't go past this stage at all.
I phoned the online shop I bought the device from and they told me they had had lots of people reporting the same symptoms and that they had identified a faulty batch. I was sent a replacement from a new batch about 4 days thereafter. The new one has worked fine ever since.
If it is a software issue that's fixable, great, go for it. But if your device is still under warrenty I'd suggest getting a replacement - worked for me!
Sorry I can't be a bit more posistive but thought I'd let u all know.
*server duplicated post*
Hi Guys,
My apologies if this has been posted already, but I couldn’t seem to find anything on it.....I have had my Diamond for about 2 weeks and the camera hardly ever works. 90% of the time when i start it all i get is the Photo logo and then a blank screen. If i push the capture button, a few seconds later I get the error "Unable to capture photo. Unable to get frame data from camera device". I have done the latest HTC official update to ROM 1.93, I have soft reset and hard reset and no luck Sometimes if I do a soft reset it will work for a little bit and then just stop working again.
Any advice would be greatly appreciated!!
Thanks
Grim
you may need to install one of x-dev custom ROMs, or try hard reseting your diamond. if the problem still exist after Hard Reset, probably it is hardware trouble.
read read and read before you install Cooked roms from xda-developers. you need to do HardSPL before instaling any other ROMs
Thanks for the response!
I have hard reset the device a few times, and no luck. I dont reallt want to install a cooked ROM, I dont think I can handle it to be honest. I will take it that it is a Hardware fault and I will be sending it back tmrw. Thanks again!
Hi Grim! I have the same problem. I've installed 1.93 official ROM and even SwiftBl 7.5, I've upgraded my Radio From .05 to .08 , but my camera is still like yours.
Have you find a solution? Did HTC service Center change your device?
Thanks..
İ have the same problem and could not find a solution for it...
Dear All,
I have same problem. Camera crashes after 1 or two photo. I have black screen.
Tried many Rom's. no fix .
How could you fix ?
anyone got a solution for this problem?
is the diamond camera hopless?
no solution for this error till now?
This issue realy bugs me now. Every time I've change the OS it work for a bit then it dies. realy anoying. Anyones suggestion may be usefull.
If it is the hardware - is it the camera? Could it be just gone loose?
There´s few steps to take.
If camera works sometimes, I think, it´s not a camera problem on itself.
(IF YOU HAVE ACCESS TO PARTS AND YOU KNOW WHAT U`RE DOING)
Try this:
Exchange flex and flash (use official RUU htc).
Or:
Put phone inbootloader, disconnect flex from board (while working and booloader on) and flash.
If everything else fails, I´m affraid the PCB has internal flash IC problems.
Dont have parts but will open it and check flex. If flash is gone how come mtty does not flag some segments as bad. Checking around the web looks like I am not the only one with this problem.
all you Coders... please help us with the camera issue.
Hey guys..
this camera for touch diamond is screwing..
tried various methods.. flashed everything possible..
still no luck..
if any xda user outthere.. who has the solution for this problem..
please help up..
my device is out of warranty..
thanks
I've found out if you take the battery out for 10 secs and put it back the camera works again untill you run another app. It feels like as soon as you run something else with camera it is screwed!
Hello all,
This morning i tried my camera on my diamond, but when i launch the camera app, it gives me black screen. That's so weird. I reinstalled the rom, did hard reset, but get same result. So i want know if that is software issue or hardware issue. If it's a hardware issue, will the camera app launches or not ? Thank's !
So i installed new rom, and when i try to take a picture with camera, it says this "Unable to capture photo. Unable to get frame data from camera device"
What does this mean ? Please help !
Have you tried modifying the option "Encode photos in portait mode" in Advanced config? It causes problems.
If it isn't that, I guess it is a hardware fault. Restore original ROM and send it to repair.
I ain't advanced config...I searched in google after getting the error messae above, i found many people with this issue, some solved it by installing original rom or diff ones. I tried that, but same result, that's weird. Also i can't send it to repair because i ain't guarantee anymore :S
Up..is there anyone ?
Not very helpful, but do you get LESS than a year warranty on yout location?
Have you tried switching between the rear and front camera?
I bought this phone from somebody, and the guarantee is dead at the moment. the camera worked fine for 2 weeks, now i don't know what happen.
@colossuss : Already did it, but got same thing, a black screen
Another up...
I had the same problem. Hard resets and reflashing did not help, luckily I had warranty left. My impression of this phone so far (both my own and from forums) is VERY bad and this is the last time I buy from HTC.
Pff sound sucks, camera is ****ed up...i'll not buy from htc anymore too.
Hi,
I got my HTC Diamond (CDMA) few weeks ago.
I installed MightyRom. Everything was working just fine.
At the beginning, camera was working and I took pictures with it, with no problem.
However, two weeks after, I'm not able to take picture anymore.
I've got a black screen, and after a moment, it said :
"Unable to get frame data from camera device"
I tried : soft reset, hard reset, reinstall Mighty ROM, Reinstall Generic ROM that came with HTC... Nothing work !!!
Anyone have an idea, would be greatly appreciated !!!!
it seems that the camera had broken
send it to htc
Aqrab said:
it seems that the camera had broken
send it to htc
Click to expand...
Click to collapse
Hi, I have the same problem: blank (black) screen, and randomly it starts to work again. After one or two photos black screen again.
At least, I've got the hope that the camera is working.
I will try to change the radio.
Regards,
AndyArg said:
Hi, I have the same problem: blank (black) screen, and randomly it starts to work again. After one or two photos black screen again.
At least, I've got the hope that the camera is working.
I will try to change the radio.
Regards,
Click to expand...
Click to collapse
Problem solved. I enter some values in the registry just like it says in this link:
http://nimovil.es/software-movil/otro-programita-para-la-htc-diamond/
Regards!
Hi I have a HTC HD with the some problem pls help me how to make the camera work thx
Hey guys, i looked all over for an answer before posting this here , but no luck.
This is what´s happening, i have a kaiser tytn II which i had problems, was going extremely slow, i removed some apps that i had installed including tomtom and same thing, so i thought about the soft/hard reset, i did it, and now......its crazy, i can´t use the touch screen, example : i want to enter my pin code and when i press number 6, it only presses number 2. its like the whole thing is messed up and the theme is really ugly, grey color . I thought maybe i could install a new firmware with a nicer looking and might solve the issue, but i don´t know where to get it and how to install it. Could someone help me how on some tips please ?
Thank you so much in advance
luisdesigns said:
Hey guys, i looked all over for an answer before posting this here , but no luck.
This is what´s happening, i have a kaiser tytn II which i had problems, was going extremely slow, i removed some apps that i had installed including tomtom and same thing, so i thought about the soft/hard reset, i did it, and now......its crazy, i can´t use the touch screen, example : i want to enter my pin code and when i press number 6, it only presses number 2. its like the whole thing is messed up and the theme is really ugly, grey color . I thought maybe i could install a new firmware with a nicer looking and might solve the issue, but i don´t know where to get it and how to install it. Could someone help me how on some tips please ?
Thank you so much in advance
Click to expand...
Click to collapse
Maybe if you start sharing what rom are U using My advice is that you definitely should flash another rom or reflash your stock rom to solve the issues you are experiencing. Please read the sticky of how to do it
you can reset it to factory settings (the ROM you last flashed that is) by this method:
press and hold the two upper hardware keys next to your call end and call button. While pressing and holding them do a soft reset. A white screen with blue text should come up. Press the green call button and wait for it to reach the screen after the percentage screen. Then press the green call button again and it will be like it first was out of the box (or when you flashed a ROM).
Kaiser tytn II
The soft reset that exactly what i did and that´s what screwed up my kaiser , i am going to re-flash it , i will look on how to do it and will have a try.
ok, one slight problem, i have a macbook all i find is for pc
luisdesigns said:
ok, one slight problem, i have a macbook all i find is for pc
Click to expand...
Click to collapse
You'll either have to create a partition and install windows on it or flash via sd card. Link here to get you started:
http://forum.xda-developers.com/showthread.php?t=433835
thank you so much, i will try it this evening from my pc hope it fixes the issue. Will let you know