Hi
I cannot post this in android development because i am new and dont have 10 posts, so i am posting it here
I was in galnet miui 6.0 with vor kernel and today i flashed glitch kernel.
After that i realised that the screen color was a bit orangish..... i thought it was because of voodoo color and i opened the voodoo control app and tried to disable it... ie i selected the color profile as original.... and then screen v1 gamma hack to reset to 2.3.3 defaults.. but no luck...
is it something that i cant change?
thanks in advance
You can try setting it manually with screen RBG multipliers in voodoo control app.
Orangish will means the screen colour is too warm. Fix it by increasing blue values while decreasing red and green till one that fits your screen.
Related
Does anyone kno of an app that can lower the lowest brightness level? I tried screen filter but i dnt like the tint it uses n it kinda distorts the quality of images and videos shown. I tried googling stll no luck. The lowest brightness level is still brite at nite.....
Have you tried turning off the Auto brightness feature and then manually reducing the brightness in the display options?
If you turn off Auto Brightness in your Display Settings, you can run your finger left or right along the top slide-down menu bar (the one that displays time, battery, signal, etc) to decrease or increase the screen brightness.
Srry i meant lowering the brightness lower than the lowest level limit. The screen is still to brite for me at the lowest level at nite.
App: screen filter
Sent from my GT-I9000 using XDA App
Use this software from Android Market,
https://market.android.com/details?id=com.curvefish.widgets.brightnesslevel&feature=search_result
Android Os will report you zero brightness when you change it in settings, but still it has 8% brightness enabled, so the above software will help you to pulling it back to original 0%
Even better than that, I remember supercurio (iirc, or was it hardcore?) hacked the SGS kernel to enable to an even lower brightness setting ages ago. However I haven't seen this hack integrated into any kernels for ages (unless I'm missing something and it's already there)
Hardcore's Speedmod K13E kernel for 2.2.1 has a super low brightness level
Try the dimmer app, it is better than screen filter, not as grainy.
Sent from my GT-I9000 using XDA Premium App
redstripe said:
Try the dimmer app, it is better than screen filter, not as grainy.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Hi whos the developer thers a bunch of these apps in the market thats called dimmer
Its the one with the light bulb, it was included in one of darky's previous roms.
Sent from my GT-I9000 using XDA Premium App
The lowest brightness level is still brite at nite.....
any oficial rom with lowest minimal brightness?
thanks
I'm sorry to bring this up again...
I'm testing out the last build teamhacksung's CM9 and it came with a bunch of options to optimize the brightness.
Although I've been experimenting on this options for quite a while, the brightness is very irregular. At one moment is very dark and for no reason the brightness comes back up while I'm in total darkness.
Do you have any idea of what's causing this?
I get this as well. Also, the screen will auto-dim after a short time of inactivity. How to control this?
Sent from my GT-I9000 using XDA App
Also, I have a friend with the same software as me, everything the same and his Galaxy S gets much darker than mine. Even when we have them side by side.
Try Semaphore's kernel on THS ICS. It has its own auto brightness that works well and has a Dark setting.
That said, I still use screen filter on top of that in darkness.
cdmackay said:
Try Semaphore's kernel on THS ICS. It has its own auto brightness that works well and has a Dark setting.
That said, I still use screen filter on top of that in darkness.
Click to expand...
Click to collapse
Semaphore's kernel disables the BLN for me.
What I did was...
In the definitions put the dim level to 6. And then I added a button in the notification bar for brightness and I gave it the automatic and dim options.
That way when I'm inside doors I put it to dim and when I'm outside I change it to automatic.
jmjviana said:
Semaphore's kernel disables the BLN for me.
Click to expand...
Click to collapse
Semaphore & BLN working fine together for me...
cdmackay said:
Semaphore & BLN working fine together for me...
Click to expand...
Click to collapse
In the same ROM as mine? Can you tell me where are the configurations for the BLN after installing the Semaphore kernel?
Currently my friend's Super Amoled screen have a blue tint. Last time on froyo, we used Galaxy Tuner to fix that. But now gingerbread is not supported yet.... So anyone know of a way to get rid of it again?
voodoo control ? im sure that works with gingerbread, but requires a supporting kernel, most kernels do support it, but double check
azzledazzle said:
voodoo control ? im sure that works with gingerbread, but requires a supporting kernel, most kernels do support it, but double check
Click to expand...
Click to collapse
I cannot change the colour with voodoo control? Only sound....
Using Dark Core 2.5
Find a kernel that supports voodoo color
GTi 9000 insanity007/insaneglitch
It do already support Voodoo Colour...
http://www.darkyrom.com/community/index.php?threads/kernel-dark-core-2-x-ginger-kernel.2072/
Hey guys, what are your color settings ?
The only settings i found so far are for the vibrant models and it seems that they do have a yellow tint instead of blue tint.
It's mine:
RGB:
R: 3609817920
G: 3691626880
B: 4100671360
Gamma:
R: -35
G: -39
B: -42
maybe it's wont show real (normal) colors but i like it ;-)
Thanks. Looks good
I have one more question (sorry )
I figured out that the Kernel has Speedmod Color and Voodoo Color togheter. My problem is i messed up the voodoo color settings a bit.
RGB Reset look okay, but what are the default settings from the Gamma section? 2.3.3 Default looks a bit too bright. Alt. settings is the closest and punchy has too unnatural colors. But the problem of the last two are that the are too dark in lower brightnes modes?
Maybe you can tell me which files are to delete to have the default voodoo color settings which come at a clean voodoo color kernel install?
When i flash another kernel without voodoo color it goes back to normal but when i reinstall the semaphore kernel the colors are switching back to that what they was before the flash. (i tried that with settings colors to almost green only)
I use this settings, looks good for me:
Screen RGB multipliers:
- Red - 2065674720
- Green - 2086127040
- Blue - 3078059840
Screen v1 gamma hack:
- Red: -16
- Green: -14
- Blue: -9
Sent from my GT-I9000 using Tapatalk
I think that values stored in "Voodoo Control" app. maybe wipe data will work!
BTW, if not you have to try reset in voodoo Control app
---------- Post added at 02:53 PM ---------- Previous post was at 02:52 PM ----------
mcsimek said:
I use this settings, looks good for me:
Screen RGB multipliers:
- Red - 2065674720
- Green - 2086127040
- Blue - 3078059840
Screen v1 gamma hack:
- Red: -16
- Green: -14
- Blue: -9
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
I tried your values but don't shows black.
Vogie said:
I think that values stored in "Voodoo Control" app. maybe wipe data will work!
BTW, if not you have to try reset in voodoo Control app
Click to expand...
Click to collapse
Thats the point. When i wipe data all data will be lost or not ? I dont want to reinstall everything, just reset the voodoo color settings to get back the values that come with a clean install. and reset in the voodoo control app ist possible. like i said, the rgb values can be resetted but the gamma dont have a reset, just three options which noone looks like the default
1. Screen v1 gamma hack :
- 50 red
- 53 green
- 44 blue
2. SRB multipliers:
Red ="2300875360"
Green ="2300875360"
Blue ="2709919680"
Kodon said:
Thats the point. When i wipe data all data will be lost or not ? I dont want to reinstall everything, just reset the voodoo color settings to get back the values that come with a clean install. and reset in the voodoo control app ist possible. like i said, the rgb values can be resetted but the gamma dont have a reset, just three options which noone looks like the default
Click to expand...
Click to collapse
I know Just a way!
Try a kernel that not support voodoo color (like 'Darky Core' if you are in Samsung's Rom)
and you'll see no touched colors.
Vogie said:
I know Just a way!
Try a kernel that not support voodoo color (like 'Darky Core' if you are in Samsung's Rom)
and you'll see no touched colors.
Click to expand...
Click to collapse
Yeah thats what i'm talking about. When i switch back to DarkCore i have the original colours. But when i switch back to semaphore for example the colors get back the settings that i left before i went to darkcore. it seems that they are saved in a system folder but i couldnt find anything related to color when i'm on darkcore. maybe i'm gonna do a full wipe and factory reset to get a real clean rom also. after that i flash semaphore again and write the default installation settings down. i guess it would be the best way.
nevertheless, till that everyone can post his optimal settings for himself down, thanks so far
Is there a way to disable voodoo color in semaphore kernel? I tried downloading voodoo control from market and reset gamma colors to default but the colors does not look like stock
Sent from my GT-I9000 using XDA App
Any help??
Sent from my GT-I9000 using XDA App
What You exactly expect? Change color profile or what?
i think he wants the color back, sir just try uninstalling the voodoo control.
yeah i want the stock colors back
soudy1994 said:
Is there a way to disable voodoo color in semaphore kernel? I tried downloading voodoo control from market and reset gamma colors to default but the colors does not look like stock
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I have the exact same problem. I installed semaphore for the bigmem, but I hate the colours. Voodoo colours may look better at higher brightness levels, but I always use my phone at minimum brightness, and the colours on the semaphore kernal are pretty lousy. I downloaded Voodoo Control to adjust it, but I still can't get the colours on stock kernel.
I no longer use the Semaphore kernal as I'm not on a Samsung rom at the moment, but as far as I can remember it required copying a script to the init.d folder and rebooting. I'm sure it'll be mention in the OP of the kernal thread.
You could try adjusting it to get any colour you prefer. Since, you know, you have all the options in the world.
Or you could buy an iPhone if you want less options.
i tried adjusting it but it was not like stock ones and i also h8 the green flash when screen goes off
soudy1994 said:
i tried adjusting it but it was not like stock ones and i also h8 the green flash when screen goes off
Click to expand...
Click to collapse
You have the ability to adjust it to any colour you want, but you couldn't find the right one.
... the Apple store is that way, buddy. It sounds like you have way too much freedom.
why u keep talking about apple and iphone? i dun like ios and i dun want to buy one
No one know how to disable it??
Sent from my GT-I9000 using XDA App
Voodoo - colour profile set to original.
Screen rgb multipliers set reset.
Screen v1 gamma hack reset to 2.3.3.
This will give you clear speedmod neutral colours.Sorry you cannot get stock colour on custom kernel butt this will bring you close to stock.
hi,
i am using stock 2.3.6 rom with semaphore kernel on Galaxy s I9000...
when the screen times out, it goes off with flashing a green light every time.. any solution to this?/
THX
Q: When the screen goes off, a green flash appears. What is wrong?
A: This is a side effect of Voodoo Color. As a workaround, try to reset to default the settings related to color in Voodoo Control application or increase the gamma values.
for more;
http://www.semaphore.gr/faq
I found that by using the crt-off effect the flash is either gone or it doesn't have the time to be seen.
Sent from my GT-I9000