Hey guys, what are your color settings ?
The only settings i found so far are for the vibrant models and it seems that they do have a yellow tint instead of blue tint.
It's mine:
RGB:
R: 3609817920
G: 3691626880
B: 4100671360
Gamma:
R: -35
G: -39
B: -42
maybe it's wont show real (normal) colors but i like it ;-)
Thanks. Looks good
I have one more question (sorry )
I figured out that the Kernel has Speedmod Color and Voodoo Color togheter. My problem is i messed up the voodoo color settings a bit.
RGB Reset look okay, but what are the default settings from the Gamma section? 2.3.3 Default looks a bit too bright. Alt. settings is the closest and punchy has too unnatural colors. But the problem of the last two are that the are too dark in lower brightnes modes?
Maybe you can tell me which files are to delete to have the default voodoo color settings which come at a clean voodoo color kernel install?
When i flash another kernel without voodoo color it goes back to normal but when i reinstall the semaphore kernel the colors are switching back to that what they was before the flash. (i tried that with settings colors to almost green only)
I use this settings, looks good for me:
Screen RGB multipliers:
- Red - 2065674720
- Green - 2086127040
- Blue - 3078059840
Screen v1 gamma hack:
- Red: -16
- Green: -14
- Blue: -9
Sent from my GT-I9000 using Tapatalk
I think that values stored in "Voodoo Control" app. maybe wipe data will work!
BTW, if not you have to try reset in voodoo Control app
---------- Post added at 02:53 PM ---------- Previous post was at 02:52 PM ----------
mcsimek said:
I use this settings, looks good for me:
Screen RGB multipliers:
- Red - 2065674720
- Green - 2086127040
- Blue - 3078059840
Screen v1 gamma hack:
- Red: -16
- Green: -14
- Blue: -9
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
I tried your values but don't shows black.
Vogie said:
I think that values stored in "Voodoo Control" app. maybe wipe data will work!
BTW, if not you have to try reset in voodoo Control app
Click to expand...
Click to collapse
Thats the point. When i wipe data all data will be lost or not ? I dont want to reinstall everything, just reset the voodoo color settings to get back the values that come with a clean install. and reset in the voodoo control app ist possible. like i said, the rgb values can be resetted but the gamma dont have a reset, just three options which noone looks like the default
1. Screen v1 gamma hack :
- 50 red
- 53 green
- 44 blue
2. SRB multipliers:
Red ="2300875360"
Green ="2300875360"
Blue ="2709919680"
Kodon said:
Thats the point. When i wipe data all data will be lost or not ? I dont want to reinstall everything, just reset the voodoo color settings to get back the values that come with a clean install. and reset in the voodoo control app ist possible. like i said, the rgb values can be resetted but the gamma dont have a reset, just three options which noone looks like the default
Click to expand...
Click to collapse
I know Just a way!
Try a kernel that not support voodoo color (like 'Darky Core' if you are in Samsung's Rom)
and you'll see no touched colors.
Vogie said:
I know Just a way!
Try a kernel that not support voodoo color (like 'Darky Core' if you are in Samsung's Rom)
and you'll see no touched colors.
Click to expand...
Click to collapse
Yeah thats what i'm talking about. When i switch back to DarkCore i have the original colours. But when i switch back to semaphore for example the colors get back the settings that i left before i went to darkcore. it seems that they are saved in a system folder but i couldnt find anything related to color when i'm on darkcore. maybe i'm gonna do a full wipe and factory reset to get a real clean rom also. after that i flash semaphore again and write the default installation settings down. i guess it would be the best way.
nevertheless, till that everyone can post his optimal settings for himself down, thanks so far
Related
Hi
I cannot post this in android development because i am new and dont have 10 posts, so i am posting it here
I was in galnet miui 6.0 with vor kernel and today i flashed glitch kernel.
After that i realised that the screen color was a bit orangish..... i thought it was because of voodoo color and i opened the voodoo control app and tried to disable it... ie i selected the color profile as original.... and then screen v1 gamma hack to reset to 2.3.3 defaults.. but no luck...
is it something that i cant change?
thanks in advance
You can try setting it manually with screen RBG multipliers in voodoo control app.
Orangish will means the screen colour is too warm. Fix it by increasing blue values while decreasing red and green till one that fits your screen.
Is there a way to disable voodoo color in semaphore kernel? I tried downloading voodoo control from market and reset gamma colors to default but the colors does not look like stock
Sent from my GT-I9000 using XDA App
Any help??
Sent from my GT-I9000 using XDA App
What You exactly expect? Change color profile or what?
i think he wants the color back, sir just try uninstalling the voodoo control.
yeah i want the stock colors back
soudy1994 said:
Is there a way to disable voodoo color in semaphore kernel? I tried downloading voodoo control from market and reset gamma colors to default but the colors does not look like stock
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I have the exact same problem. I installed semaphore for the bigmem, but I hate the colours. Voodoo colours may look better at higher brightness levels, but I always use my phone at minimum brightness, and the colours on the semaphore kernal are pretty lousy. I downloaded Voodoo Control to adjust it, but I still can't get the colours on stock kernel.
I no longer use the Semaphore kernal as I'm not on a Samsung rom at the moment, but as far as I can remember it required copying a script to the init.d folder and rebooting. I'm sure it'll be mention in the OP of the kernal thread.
You could try adjusting it to get any colour you prefer. Since, you know, you have all the options in the world.
Or you could buy an iPhone if you want less options.
i tried adjusting it but it was not like stock ones and i also h8 the green flash when screen goes off
soudy1994 said:
i tried adjusting it but it was not like stock ones and i also h8 the green flash when screen goes off
Click to expand...
Click to collapse
You have the ability to adjust it to any colour you want, but you couldn't find the right one.
... the Apple store is that way, buddy. It sounds like you have way too much freedom.
why u keep talking about apple and iphone? i dun like ios and i dun want to buy one
No one know how to disable it??
Sent from my GT-I9000 using XDA App
Voodoo - colour profile set to original.
Screen rgb multipliers set reset.
Screen v1 gamma hack reset to 2.3.3.
This will give you clear speedmod neutral colours.Sorry you cannot get stock colour on custom kernel butt this will bring you close to stock.
hi,
i am using stock 2.3.6 rom with semaphore kernel on Galaxy s I9000...
when the screen times out, it goes off with flashing a green light every time.. any solution to this?/
THX
Q: When the screen goes off, a green flash appears. What is wrong?
A: This is a side effect of Voodoo Color. As a workaround, try to reset to default the settings related to color in Voodoo Control application or increase the gamma values.
for more;
http://www.semaphore.gr/faq
I found that by using the crt-off effect the flash is either gone or it doesn't have the time to be seen.
Sent from my GT-I9000
Hi,
I am using ParanoidAndroid ICS rom, Everything is superb apart from the black clipping screen. Of course I only notice the black clipping in a dark room, whereas in daylight the screen seems perfect.
In the PA rom under settings > Advanced > Screen > there is screen gamma but i can not edit it or even choose it. I'm assuming its been disabled, is there a way to enable this so I can edit the gamma settings or is there an alternative way to edit gamma settings. if there is, can anyone please share it.
Thanks in advance.
salespalace said:
Hi,
I am using ParanoidAndroid ICS rom, Everything is superb apart from the black clipping screen. Of course I only notice the black clipping in a dark room, whereas in daylight the screen seems perfect.
In the PA rom under settings > Advanced > Screen > there is screen gamma but i can not edit it or even choose it. I'm assuming its been disabled, is there a way to enable this so I can edit the gamma settings or is there an alternative way to edit gamma settings. if there is, can anyone please share it.
Thanks in advance.
Click to expand...
Click to collapse
Its not working on PA but there is an option of Outdoor Mode which makes it little bit higher.
Hi,
to get custom led notifications you need a rooted P2 and Light Flow (find it on google apps)
I want to thank Andrew Moore (Light Flow)for taking the time to look at this with me and pointing me in the right direction
New (upcoming) version of Light Flow supporting "large" numbers for RGB led brightness will be available soon. Otherwise you may want to edit the backup file as per this post:
https://forum.xda-developers.com/vibe-p1/how-to/led-fix-custom-roms-t3569108
1>Disable led notifications on you device (Display)
In Light Flow
1> enable Direct mode and root
2> enable rgb led
3> set the rgb brightness to any the following for your notification:
Bright red:13631488
Pale Blue:6316128
Crabapple Red (pink):11796512
Orange:12607488
Green: 35840
Cyan Blue: 32896
Sea Blue: 8388
Dark Purple : 3876477
Before Andrew put me in the right direction, I tried different brightness levels with mixed success. As you see from above, the numbers have no logical sense (at least to me).
If you do find additional colors, please post them in this thread.
HAPPY CUSTOM LED NOTIFICATIONS EVERYONE
Here are the "reference colors"
Works also on custom roms.Thanks for the guide!
Thanks for making the LED work! But I'm stuck at the brightness levels part... In the notification settings per app, under the light settings, I can only set 4 numbers and you give a whole lot more. What am I doing wrong?
HyperactiveNL said:
Thanks for making the LED work! But I'm stuck at the brightness levels part... In the notification settings per app, under the light settings, I can only set 4 numbers and you give a whole lot more. What am I doing wrong?
Click to expand...
Click to collapse
As I said, light flow at the moment only supports 4 . Andrew (the maker of light flow) will update the app asap. If you are in a hurry., use the backup/modify./restore method mentioned in the first post. Just change the brightness level. It works.
Hi, any chance to set the red color too (the red color the LED shows when charging)?
Found it in the first post Sorry!
Useful 10x.
Thanks for the tip and tutorial, I got a bit confused on where to set the RGB colors (in the individual notifications) but it's working well now. Also the battery charged threshold was set at 90% by default so it popped up as green when I plugged in at 92%
It is only working in Test for me. Can someone send détailled settings?
Thanks
Did you make sure it was active? If it is you'll see a notification in the pull-down list.
This is really cool, definitely will use a custom Rom because of Light Flow.
Working thanks
Could someone tell me where I insert the RGB values?
I have a rooted Lineage 14.1, but all I can select is one colour with RGB enabled...
There is only one colour available per application, ie e.g. Signal has blue (which works), agenda as well, but Gmail has black... And that's not showing of course
Edit: I edited the settings manually and imported them again as suggested in the opening post, we'll see how that goes...
Does it work with free version of Lightflow?
https://play.google.com/store/apps/details?id=com.rageconsulting.android.lightflowlegacy
Works for me with the legacy version. But there is also a "light" version of the newest release.
Currently, I see heavy battery drain due to light flow; the device never goes to sleep. Maybe, this is different with the light version... I will try.
Edit: same battery drain issue with the light version...
This does not seem to work with the latest version of the app(I even bought pro). I followed all the steps but it never works. Is there something I'm missing? after enabling rgb control i setup a notification and in the setting's light tab i enable the light and set the rgb LED to solid and set the color to one given in the first post(none of them seem to work). I then use the test button but LED does not turn off(tried both - turning screen off and keeping it on). Any Help?
@Uibon
Me neither.
Edit: Legacy is working, but only when screen is off. I'm rooted of course rooted (Magisk) and I have the "screen on" option ticked.
Wmateria said:
This is really cool, definitely will use a custom Rom because of Light Flow.
Click to expand...
Click to collapse
The title says stock?
Those of you who reported it working, does it work when the screen is on as well?
Edit: Missed calls, incoming call and other things related to the system is working when screen is on. With Textra (and other apps?) it only works when screen is off.
Thanks for the instructions and links.
I bought the app (Just Rs 10).
Cant be more worthy purchase.
All working good.
hi can someone help i have been able to set a few app leds and they work properly but whats app i set to green but it is not working i have also disabled the led setting in whats app settings but still not flashing green for whats app message?