Hello everyone,
So I've updated from CM 7.0.0 to 7.0.2.1 today, and the Market refuses to download anything at all, giving me a "Download is unsuccessful" notice. I've tried to reinstall the ROM multiple times, and even restored a CM 6.0.1 backup I made a while ago, and still the Market refuses to let me download anything. Can anybody help figure this out?
I've been using ROM Mangaer to do this with ClockworkMod, and I've been wiping the data and cache at every install and yet nothing changed.
I am still on cm6. I noticed yesterday that several apps did not update successfully. Perhaps the problem is not with the new MOD?
I recently decided that I wanted to do a fresh install of CM7 using the latest nightly. I wiped everything, including boot (which I think is the problem). I made a bootable CWR SD card and installed the latest nightly and gapps. Everything booted up fine and ran great, until I tried to use ROM Manager. Every time I try to boot into recovery, the Nook hangs at the "ReadForever" screen. It was hanging at the new Cyanogen boot logo, but in an attempt to correct the issue, I flashed the stock 1.2 uboot. I have also noticed that several apps are now showing up at phone size when they were fine before running the same setup. I am running n87, 5/23/11 OC, and the stock 1.2 uboot. Does anyone have any idea what the problem might be?
You can try to disable the "compatibility mode" in order to try and get the apps to use the full screen. Regarding the Clockwork recovery issue, I have no idea - sorry!
I am not able to install google apps on my hp touchpad. after a month or so after messing with classicnerd and cyanogenmod and it getting stuck in a boot loop, i picked it up again and tried wiped everything, now CM9 the latest nightly works great but whenever I try to install the google apps pack, it freezes. I have tried from recovery and RomManager with rebooting. both freeze with the exclamation point in a triangle. I could do it before and it is the latest version of both.
Is there something that I am doing wrong?
nintennuendo said:
I am not able to install google apps on my hp touchpad. after a month or so after messing with classicnerd and cyanogenmod and it getting stuck in a boot loop, i picked it up again and tried wiped everything, now CM9 the latest nightly works great but whenever I try to install the google apps pack, it freezes. I have tried from recovery and RomManager with rebooting. both freeze with the exclamation point in a triangle. I could do it before and it is the latest version of both.
Is there something that I am doing wrong?
Click to expand...
Click to collapse
Never have had to use it but there's some type of gApps fixer you flash that may help solve it. Can't remember what its called or where its at but shouldn't be hard to find.
Sent from my cm_tenderloin using Tapatalk 2
Here's the gapp fixer utility link : http://www.tabletsupportforum.com/forum/showthread.php/1645-Gapps-amp-Gapps-Fixer-for-CM9-(ICS)
I have used it and it worked fine for me. Good luck.
Thanks for the advice and help and I wish I could say it helped. Not that it is wrong, but almost as soon as I posted this I tried to download and install the google apps from RomManager. I don't know why I thought of it since on my other devices I use Amon-RA for recovery and I dislike clockworkmod and don't ever use RomManager. Lo and behold, it worked! I was very surprised but after updating things still work fine today.
Glad to see it worked for you.
Another option I would have recommended would be to install the GooManager App (from www.goo-inside.me) and tried that. It'll grab the latest GApps for you, too. And it allows for incremental ROM downloads, so you don't have to always get the 100+ MB ROM file every day (if your ROM author supports that).
Hi guys, having some serious issues with my Tab. It's the Telstra GT-P7320T.
So I had it rooted and flashed with the glitkis kernel all working fine still on the standard Telstra version of honeycomb. Then when their update for ICS finally came out (after nearly 6 months of knocking it back) I went to update it in the normal manner, not thinking it would have a hissy fit with the root and the custom kernel.
So after it downloaded it did its pre install bit, it rebooted, but then loaded into CWM recovery, and thats where its stayed. I've tried factory resets, clearing and formatting all the caches (davlik, system etc) i've used adb to push a few different roms and kernels etc to the device but nothing ive tried has worked. I flashed arlics ics rom, but it still just boots into recovery. Ive tried flashing the stock kernel and stock recovery but when i try to install zip from sd them they fail "install aborted (bad)"
Anyone got any ideas on what process and files I should try? Ive searched up and down the forum trying different methods for fixing soft brick and returning to stock but to no avail.
Cheers
ragvaror said:
Hi guys, having some serious issues with my Tab. It's the Telstra GT-P7320T.
So I had it rooted and flashed with the glitkis kernel all working fine still on the standard Telstra version of honeycomb. Then when their update for ICS finally came out (after nearly 6 months of knocking it back) I went to update it in the normal manner, not thinking it would have a hissy fit with the root and the custom kernel.
So after it downloaded it did its pre install bit, it rebooted, but then loaded into CWM recovery, and thats where its stayed. I've tried factory resets, clearing and formatting all the caches (davlik, system etc) i've used adb to push a few different roms and kernels etc to the device but nothing ive tried has worked. I flashed arlics ics rom, but it still just boots into recovery. Ive tried flashing the stock kernel and stock recovery but when i try to install zip from sd them they fail "install aborted (bad)"
Anyone got any ideas on what process and files I should try? Ive searched up and down the forum trying different methods for fixing soft brick and returning to stock but to no avail.
Cheers
Click to expand...
Click to collapse
hey mate,
i was just caught out by this last night. all you need to do is re-flash on a stock rom with ether oden of heimdall and youre good to go. im sure there is a oden flashable rom on these forums
take it sleazy!
Cheers mate,
Ive been trying to reflash a stock rom by pushing it to the sd card and installing it, but when i go to install it from recovery it tells me the rom file is bad and aborts, like its corrupt or something, so maybe i need to find some different downloads to try. Thanks, there's hope still at least, lol. I'll find the odin file and try doing it that way.
ragvaror said:
Cheers mate,
Ive been trying to reflash a stock rom by pushing it to the sd card and installing it, but when i go to install it from recovery it tells me the rom file is bad and aborts, like its corrupt or something, so maybe i need to find some different downloads to try. Thanks, there's hope still at least, lol. I'll find the odin file and try doing it that way.
Click to expand...
Click to collapse
yeah, i think its becaute the cwm recovery doesnt know what to do with the update.
you need to have the stock recovery installed. dont take my word for it though.
just look up a tutorial for flashing a rom via oden. its really easy, just make sure the image you are flashing is of .tar.md5 extension.
You can get the stock rom at sammobile.com. down load the zip file then extract the .tar.md5 file out of it using 7-zip.
God promised men that he'd put beautiful women in all corners of the world. Then he laughed and laughed and made the world round
FIXED!! - Cheers Everyone!
OK, so I downloaded the stock telstra rom off the forum here, its at the top of page 3 at present, flashed that with Oden, which fixed the soft brick and allowed me to boot again. I then flashed the stock recovery, rebooted, got into the system and downloaded the ICS update again. Once it rebooted, with the stock recovery it was able to install and successfully boot into ICS!! I was more stoked than I've ever been before, let me tell you, lol.
how ?
ragvaror said:
FIXED!! - Cheers Everyone!
OK, so I downloaded the stock telstra rom off the forum here, its at the top of page 3 at present, flashed that with Oden, which fixed the soft brick and allowed me to boot again. I then flashed the stock recovery, rebooted, got into the system and downloaded the ICS update again. Once it rebooted, with the stock recovery it was able to install and successfully boot into ICS!! I was more stoked than I've ever been before, let me tell you, lol.
Click to expand...
Click to collapse
i currently have the same problem as you did, how did you flash with odin if you're stuck in recovery mode ?
please help, I'm racking my brain trying to figure this out.
Hi...
I have no idea how exatly how, but I might have bricked my galaxy. I installed LineageOS 19 and got the recent update and ofc. it didn't boot after (bootloop). I wiped it using twrp and installed the "first" version I tried again. Will boot untill I try installing gapps.
I have looked around and tried restoring using odin. The Download Mode screen says "unsupported version" in the cornor.
Soo now I'm looking for someone with a backup with a stock firmware so I can use that to get everything working again
______________________________________________________________________________________________________________________________________
Many thanks, a lost s10 user (Simon)