Hi everyone!
I know how to search, so no need to tell me that! I found this thread http://forum.xda-developers.com/showthread.php?t=881206 but it is not so helpful.
I tried to update via KIES this morning, and it failed. Recovery mode does not work either..
I have posted some PC screenshots below...
Any advice welcomed.
Ofiaich
tablet screen now shows these icons..
any advice welcomed..
now charged up tablet again and the icons in the picture below still show..
Do I need to press power plus volume buttons to do anything?
Ofiaich
ofiaich said:
tablet screen now shows these icons..
any advice welcomed..
now charged up tablet again and the icons in the picture below still show..
Do I need to press power plus volume buttons to do anything?
Ofiaich
Click to expand...
Click to collapse
Go to dev section look at the sticky threads there is a thread in how to unbrick your tab
Your.tab still alive its just second download mode
Look at my thread and read carefuly and do step by step
Btw: referring you can do search!!! Nah u didn't
There is Q|A section is full by this kinda of issue
Anyways check the thead
Good luck
Sent from my GT-P1000 using Tapatalk
thanks k0sh
Actually, yes, I did search and was still doing. I have been around forums for a long time!
I found your thread
http://forum.xda-developers.com/showthread.php?t=1133590 and will read thoroughly and explore this afternoon.
Thanks,
Ofiaich
ofiaich said:
thanks k0sh
Actually, yes, I did search and was still doing. I have been around forums for a long time!
I found your thread
http://forum.xda-developers.com/showthread.php?t=1133590 and will read thoroughly and explore this afternoon.
Thanks,
Ofiaich
Click to expand...
Click to collapse
No prob and glad u found the thread , sorry i couldnt post it because im using my tab right now as my laptop now is in 2pieces lol
Need to repair it , i hate using my tab as a main thing for browser"ing"
Good luck
Cheers
Sent from my GT-P1000 using Tapatalk
thanks k0sh!
I am sure secondary download mode failure = soft brick..
I am reading the thread from now...
Ofiaich
ofiaich said:
thanks k0sh!
I am sure secondary download mode failure = soft brick..
I am reading the thread from now...
Ofiaich
Click to expand...
Click to collapse
Yup it is soft brick good step
Trust me its simple just focus thats all
Sent From Hell To Take Your Soul
thanks
I am at the " Download your Firmware from www.samfirmware.com
(extract The Tar From the ZIP You Downloaded " stage now..
I will take my time and relax and ejoy
Ofiaich
ofiaich said:
thanks
I am at the " Download your Firmware from www.samfirmware.com
(extract The Tar From the ZIP You Downloaded " stage now..
I will take my time and relax and ejoy
Ofiaich
Click to expand...
Click to collapse
Yeah that will be good lol
Watch the video for odin part guide
Sent From Hell To Take Your Soul
Is it me or does this Kies program suck? Lots of problems with bricked phones everywhere! How can one of the biggest company of electronic devices in the world produce crap like this? And what's this stupid way of rolling out updates one region at a time? Samsung what's a matter with you? I'm beginning to think it's better to flash the dam stuff yourself!
Sent from my GT-P1000 using Tapatalk
Hi!
I am at this stage now...
and hope I am doing things correctly..
How long should Odin take? 30 minutes?
Ofiaich
Hi everyone!
I get a feeling that this is a 'return to Samsung' problem..
I can get the Downloading.... do not turn off Target!!! screen on the tablet,
but Odin fails.
I know it is because I am doing something wrong,, but I am bit sure what!
I have two questions - for a UK Tablet bought in Staples, is this the correct TAR file?
P1000XXJQ1_P1000XXJQ1_P1000XXJPZ_HOME
and is the pit file
s1_odin_20100512.pit
or
s1_odin_20100803.pit
I also tried recovery from KIES but no luck..
Any advice welcomed!
Ofiaich
Hey u dont need to put any of these pits
Go and start without putting the pit
There is already pit in the rom
Flash it without hitting anything except start
Sent From Hell To Take Your Soul
thanks again,
tried without the pit file..
and it still fails, and I tried with re-partition checked and unchecked..
so I am wondering if I choose the correct rom.
P1000XXJQ1_P1000XXJQ1_P1000XXJPZ_HOME
All good fun and learning!!
Ofiaich
ofiaich said:
Hi everyone!
I get a feeling that this is a 'return to Samsung' problem..
I can get the Downloading.... do not turn off Target!!! screen on the tablet,
but Odin fails.
I know it is because I am doing something wrong,, but I am bit sure what!
I have two questions - for a UK Tablet bought in Staples, is this the correct TAR file?
P1000XXJQ1_P1000XXJQ1_P1000XXJPZ_HOME
and is the pit file
s1_odin_20100512.pit
or
s1_odin_20100803.pit
I also tried recovery from KIES but no luck..
Any advice welcomed!
Ofiaich
Click to expand...
Click to collapse
The pit files you've quoted are old. They're probably for the Froyo based ROMs. For Gingerbread firmwares, use the pit file I've attached below. I zipped it up as XDA doesn't allow files with a .pit extension. Just extract it from the zip file and use it.
Use these following setup in the pic below, substituting the "P1000XXJQ1_P1000XXJQ1_P1000XXJPZ_HOME.tar" file in place of the "GB_Stock_Safe_v5.tar”, as well as the modem of choice in the Phone slot.
thanks thepittbull !
Tried that too with the P1000XXJQ1_P1000XXJQ1_P1000XXJPZ_HOME
and that fails too.
I get this in Odin, ( see screenshot )
I also tried this rom P1000XWJMP_P1000XXJMI_P1000SEBJM5_HOME
I am sure I am making a silly mistake but just can't see it!
I will read lots again and call back here later..!
thank you for your patience..
Ofiaich
Thanks very much...
thepittbull said:
Use these following setup in the pic below, substituting the "P1000XXJQ1_P1000XXJQ1_P1000XXJPZ_HOME.tar" file in place of the "GB_Stock_Safe_v5.tar”, as well as the modem of choice in the Phone slot.
Click to expand...
Click to collapse
I will try tomorrow as I am going to a 20 year reunion this evening and better get ready to go out.
I am not sure how to choose the correct Modem, but I will search for the "GB_Stock_Safe_v5.tar” file.
edit -downloading GB_Stock_Safe_v5.tar now...from teamovercome.net but not sure wich modem to choose! JK3, JMF, JPZ or TMO,
thanks again!
back tomorrow!
Ofiaich
ofiaich said:
thanks thepittbull !
Tried that too with the P1000XXJQ1_P1000XXJQ1_P1000XXJPZ_HOME
and that fails too.
I get this in Odin, ( see screenshot )
I also tried this rom P1000XWJMP_P1000XXJMI_P1000SEBJM5_HOME
I am sure I am making a silly mistake but just can't see it!
I will read lots again and call back here later..!
thank you for your patience..
Ofiaich
Click to expand...
Click to collapse
Are you using a zip file instead of a tar file? Seems it can't read the file in the PDA section. If you've downloaded it as a zip file, you need to extract it out first. Your file names in your screenshot is kinda long, so I can't exactly see the files you're flashing. If you're on JQ1, use the JPZ for now.
Anyway, the GB stocksafe file is from TeamOvercome.net. It's our recommended stock-safe package, that we recommend to keep as it's like a mini-toolkit with everything you need to restock. There's the guide on the site, to help you in the restocking process with the package.
Hi thepittbull!
tried again and have attached a screen shot.
It failed too... I have no idea why..!
I had better get ready to go out!
Thanks for yours and k0sh time and patience!
Ofiaich
ofiaich said:
Hi thepittbull!
tried again and have attached a screen shot.
It failed too... I have no idea why..!
I had better get ready to go out!
Thanks for yours and k0sh time and patience!
Ofiaich
Click to expand...
Click to collapse
I've just read thru the thread again. One quick question: Were you running Android 2.2 prior to the flashing?
Related
hello xda, my samsung captivate i897 is breacked, i can enter in mode dowloading, the odin3 can kwon the phone, but freeze in DO NOT TURN OFF TARGET!!
, and no continue, i try to reinstall froyo 2.2, help me plz
First of all this question is in the wrong section. Second of all, in ODIN one click you press "Start". If you press master clear it sometimes freezes at that screen you were talking about. Third, your grammar/spelling is horrific
sorry men, i dont speak english, im desesperate, but i can find solution, thanks for you answer men. bye
nbs11 said:
First of all this question is in the wrong section. Second of all, in ODIN one click you press "Start". If you press master clear it sometimes freezes at that screen you were talking about. Third, your grammar/spelling is horrific
Click to expand...
Click to collapse
English isn't everyone's native language. In the future try to not to comment on spelling and grammar mistakes until after you've figured out where they live.
Sent from my SAMSUNG-SGH-I897 using XDA App
This same thing happened to me and I tried a million times and always got stucked like you with the "One Click ODIN" so I tried another version of ODIN and that worked for me... I am attaching the file, open it, browse to the PIT file (included as well) and then browse to the TAR file that you can download here :
http://www.creekaddict.com/android/PDA.tar
then put the phone in download mode and make sure ODIN recognize it and it start
I hope this works for you, I tried like 3 different PIT files and this was the only one that worked
thaks you man, very nice
help please, does not start, is this image and can not nor do I reset it or anything, please help me
I installed a version of rom do not know exactly what, and then when I reset my screen appeared an image of it and can not go anywhere!
Reflash it?...
rausvasile said:
help please, does not start, is this image and can not nor do I reset it or anything, please help me
I installed a version of rom do not know exactly what, and then when I reset my screen appeared an image of it and can not go anywhere!
Click to expand...
Click to collapse
omg.. these posts.. seen hundred of these..
Remove the battery, put it back, (vol-, home-button,power) to download mode and reflash with odin.
petzku said:
omg.. these posts.. seen hundred of these..
Remove the battery, put it back, (vol-, home-button,power) to download mode and reflash with odin.
Click to expand...
Click to collapse
Mate, where is your signature gif from? As in movie or something?
I've tried, but nothing stays the same
###***They're lying to you!!! It's BROKEN, throw it away now, quickly!!!!***###
Lol, or you could try this thread and see if it helps (posted in the right forum I might add)
###***They're lying to you!!! It's BROKEN, throw it away now, quickly!!!!***###
NO NO NO Post to me please i building new house from Galaxy bricks >>> Big Big House .
jje
JJEgan said:
###***They're lying to you!!! It's BROKEN, throw it away now, quickly!!!!***###
NO NO NO Post to me please i building new house from Galaxy bricks >>> Big Big House .
jje
Click to expand...
Click to collapse
While I understand the joke, but please spare a thought to the OP. I understand the state of panicky after seeing it, the anxiety and all.
Sent from my GT-I9000 using XDA App
i had d same problem wen i flashed d firmware wrongly. it appears tat u ve bricked ur phone. hold vol down + home button + power button. if any picture comes like an android sweeping out d trash saying downloading. if so then visit samfirmware.com -> samsung android. then select galaxy s I9000. Then it will ask u to sign in. if u are a member then no problem or else register.
see ur country or region then download the firmware u were using. then download the odin and the required .PIT file. flash it. cool. ur phone is back to normal....
if it doesnt go to download mode.................... man u are in big problm get ur motherboard changed. it happened to me. i had to change my galaxy s motherboard.
Hello, I'm Luis Henrique. I'm brazilian, so I bought the national version of Galaxy S, the GT I9000B. Yesterday (03/06/2011) I was testing some new Roms for my phone. I was using the Odin3 v1.7. I was going to put a 2.2 original Rom, but I accidentally left the box called "re-partition" checked and pressed start. All other boxes was correct. In the middle of the process i saw it, but I didn't stopped it because I got afraid that something worst could happen. I guess that option half-bricked my phone. I already wiped all data, wiped cache partition and tried to format the internal sd-card. I tried a thousand different ways of fixing it, but it all was useless. I'm not that smart with all this rom, flash, kernell, version stuff. But if you guys help me, I'm sure will try my best to fix the phone, because it's such a great phone...
I'm sorry for this new thread, but all the others didn't helped me at all.
Thanks in advance.
Luis Henrique
Darn... I've another rom and nothing happened...
I"m using odin3 1.83 now...
my story. I fixed it.
good luck
http://forum.xda-developers.com/showthread.php?t=982729
Repaired: Can't mount /dev/block/stl10
the fix: A full firmware (pda/csc/phone/pit) odin w/repartition.
should work let me know.
Thanks for the answer...
Is this hard to recover my phone?
http://forum.xda-developers.com/showthread.php?t=983785
check this out i just fixed it
Lyon huntington said:
Repaired: Can't mount /dev/block/stl10
the fix: A full firmware (pda/csc/phone/pit) odin w/repartition.
should work let me know.
Click to expand...
Click to collapse
I'm sure trying to find one, but it's hard as hell...
I've been looking at samfirmware and I didn't find nothing there...
danni_ind said:
http://forum.xda-developers.com/showthread.php?t=983785
check this out i just fixed it
Click to expand...
Click to collapse
Yeah, I'm trying HARD to find a 3 .tar stock rom to flash my phone again...
Thanks for the help!!
u need to download and flash dbdata.rfs.tar in odin by itself
here is the file
Chillax !!! ok dude listen to me here is the 3 tar file
http://www.multiupload.com/WB3104V8G0
Pass = samfirmware.com
Info Samsung Stock Rom :I9000XXJPC
Use 512.pit and 3-tar files from here and Re-partion in Odin and you're done
Believe me...
danni_ind said:
Chillax !!! ok dude listen to me here is the 3 tar file
http://www.multiupload.com/WB3104V8G0
Pass = samfirmware.com
Info Samsung Stock Rom :I9000XXJPC
Use 512.pit and 3-tar files from here and Re-partion in Odin and you're done
Believe me...
Click to expand...
Click to collapse
So, Danni_ind, I won't have problem since my phone is a GT-I9000B? I don't know if this Rom was made for him...
I9000B !...really sorry i dont know, but it works on my international model
XX = Europe (I am from india)
danni_ind: hey, I'm having the same problem and your solution didn't seem to work either. I tried both ways using the 512 pit file with odin 1.3 and the also the package you threw into the zip, 803 pit with odin 1.0.
had all 3 files with repartition clicked and still didn't work...
i guess there may be some compatibility issues with the phone if you use the european version of firmware , but the main problem will be solved(partition)... then after that you can use the 1 tar file to change it to I9000B version which you have ? give it a try....
are you sure you selected the right PDA MODEM AND CSC files in the right dialoug boxes ? because once i didn't select the files properly and it was showing the same...check it
danni_ind said:
i guess there may be some compatibility issues with the phone if you use the european version of firmware , but the main problem will be solved(partition)... then after that you can use the 1 tar file to change it to I9000B version which you have ? give it a try....
Click to expand...
Click to collapse
I'm sure will try, but now I'm downloading it...
2 mb internet from Brazil sucks...
Thanks, man.. Like we say here, you're bein a hand in the well...
uhuhraushrashsauh...
Really usefull tips...!!
actually i am mind fcked i am having problem with a vodoo kernel(supercurio)...it changes the filesystem during first boot and gets stuck at the home screen, god knows whats wrong
formatted my phone 11 times since i posted the 1st reply to you
god help me....arggg
Yeah, I'm sure. This didn't work at all for me.
jt_kyle said:
Yeah, I'm sure. This didn't work at all for me.
Click to expand...
Click to collapse
I'll have to try, this is my second day trying to solve this damn problem...
danni_ind said:
actually i am mind fcked i am having problem with a vodoo kernel(supercurio)...it changes the filesystem during first boot and gets stuck at the home screen, god knows whats wrong
formatted my phone 11 times since i posted the 1st reply to you
god help me....arggg
Click to expand...
Click to collapse
I'm not that smart or anything, but.. Why don't you try another kernell...?
There are other that can give you the same result, don't?
So a few hours ago, i tried to flash the value pack (XXKQB) ROM on my Galaxy S Plus,it started normally but sort of freezed on ˝setupconnection˝
The phone was still in download mode,and after about 20 minutes of siting there,restarted the phone since nothing was happening, and it´s safe (for now ).
It should look like this,right?(see attachment)
__________________________________________
WRONG VERSION OF ODIN heh,silly me
looks like the pic didn´t upload succesfully
I have no idea what you are doing . How did you set up Odin? did it detect your phone? Have you closed all Kies applications? You could post a link to the thread you got the download from... (Did you ask the thread where you got the download from?) Why is there only one file? Is it meant to be like that? (I know some roms can be zipped/tarred so you only need one file but is this that sort of file?)
The list can go on and on. Please provide more information... What is the status of your phone now? Can you boot up to your home screen or are you stuck at soft-brick screen? I ask this because i don't understand what safe means. I would consider a soft brick safe because i know what to do when i have one... Re-flash!
So to that image. I am assuming this is how you set up odin BEFORE you connected your phone. I would suggest tick re-partition, this WILL factory reset your phone. A suggestions not always necessary, read the thread. If you are on GB already then i don't think you need to. Also usually you are still required to have a .pit file. (I haven't flashed via odin in a long time, so things may have changed) Check you don't need one.
Finally sometimes when i flash via odin, it get stuck i think at the same point you do. I have to unplug and take battery out. If i boot up i get two symbols with a line of some sort in the middle. In this case i go back to download mode and re-flash and it flashes correctly this time.
Sorry for the long message its just the more information the better and quicker people can help. Hope i helped, if not please provide as much information as possible
domi525 said:
looks like the pic didn´t upload succesfully
Click to expand...
Click to collapse
Go back here http://forum.xda-developers.com/showthread.php?t=1581193&page=21 and repeat a question. You didnt setup ODIN right...
I just rebooted it normaly, it isn't bricked or anything like that...
Thanks!
Sent from my GT-I9001
Gusta_HR said:
Go back here http://forum.xda-developers.com/showthread.php?t=1581193&page=21 and repeat a question. You didnt setup ODIN right...
Click to expand...
Click to collapse
Ok thanks!
Fala
Sent from my GT-I9001
So everything sorted?
Talon26 said:
So everything sorted?
Click to expand...
Click to collapse
yep
Hello, ive got the same problem so what did you really do to fix the problem, change the odin version or what??
Eirik2306 said:
Hello, ive got the same problem so what did you really do to fix the problem, change the odin version or what??
Click to expand...
Click to collapse
Search for the flashing tutorial under 9001 software development
Sent from my GT-I9001 using Tapatalk
domi525 said:
So a few hours ago, i tried to flash the value pack (XXKQB) ROM on my Galaxy S Plus,it started normally but sort of freezed on ˝setupconnection˝
The phone was still in download mode,and after about 20 minutes of siting there,restarted the phone since nothing was happening, and it´s safe (for now ).
It should look like this,right?(see attachment)
__________________________________________
WRONG VERSION OF ODIN heh,silly me
Click to expand...
Click to collapse
Replace Odin, and install the files as in the screenshot, the debug mode on the phone, turn off your phone, enter in the flashing mode after 3 buttons.
Hi All
Today I thought I would try to install Jellybean on My tab, I am a total nube at this but thought I could follow the tutorial. First I rooted my tab, then tried to backup the tab but it didn't work and then I thought what the hell I'll just try it.
Now it just shows the black and white Samsung Screen and won't turn off.
When I go in to the Android System recovery a message shows - /cant access to ‘system/csc/XEF/system/
I've tried using Odin and all seems good but I can't get ClockWorkMod to appear on my tab.
I bought my tab in the UK but it got shipped from France so has default language setup in French If that has anything to do with it.
Please help, I've tried following some threads on here but some of it seems to be out of my depth. Could someone explain in simple terms how I can get my tab back to normal?? It would be very much appreciated. I'm so annoyed at myself :crying:
Thanks in advance
Mike
Seems like you dont have root for some reason... there is a all in 1 guide in general section, u might wanna check that out... then install CWM and after that a new rom after installion clear dalvik and data.
JU57FL1P said:
Seems like you dont have root for some reason... there is a all in 1 guide in general section, u might wanna check that out... then install CWM and after that a new rom after installion clear dalvik and data.
Click to expand...
Click to collapse
Thanks for your reply, I've been looking at the All in 1 guide but it does confuse me a little, could you explain how I install these as I've been trying to fix this all day and haven't gotten anywhere.
Thanks
Help its getting worse!
I read that all for one help guide and decided to flash the pit file since nothing else was working, now my tab is stuck on the android downloading screen and wont go off it, I can't even get it to go in to recovery mode! Help!!!!!!!!!!!!! :crying:
Ummn u need to use odin to fully restore ur tab, wait for someone to provide u with the files... i dont have enough experience with odin...
JU57FL1P said:
Ummn u need to use odin to fully restore ur tab, wait for someone to provide u with the files... i dont have enough experience with odin...
Click to expand...
Click to collapse
Thanks, can someone please help me with these files please I'm desperate. :fingers-crossed:
Right, I've been looking at this for 2 days now.
I've noticed that their is a CSC file option on Odin, I'm also in the middle of downloading the stock rom P7310XWLA2 which is the French version of the ROM.
So when it has downloaded should I try to find a CSC file as well as the PDA file to send to my tab?
Please Help :fingers-crossed:
MikeMcGrathXmen said:
Right, I've been looking at this for 2 days now.
I've noticed that their is a CSC file option on Odin, I'm also in the middle of downloading the stock rom P7310XWLA2 which is the French version of the ROM.
So when it has downloaded should I try to find a CSC file as well as the PDA file to send to my tab?
Please Help :fingers-crossed:
Click to expand...
Click to collapse
ok I've loaded the stock rom P7310XWLA2 from odin there was no seperate csc file
But the tab started to load up 3 things came up with failing to mount data and cant mount your storage is not prepared yet on updating application, applting Multi CSC and installing multi CSC
The tab then rebooted and all looked well until the tab asked 'Entrer mot passe' which I think is enter you password i entered 'samfirmware.com' but it says desole - sorry
Any ideas please???
MikeMcGrathXmen said:
ok I've loaded the stock rom P7310XWLA2 from odin there was no seperate csc file
But the tab started to load up 3 things came up with failing to mount data and cant mount your storage is not prepared yet on updating application, applting Multi CSC and installing multi CSC
The tab then rebooted and all looked well until the tab asked 'Entrer mot passe' which I think is enter you password i entered 'samfirmware.com' but it says desole - sorry
Any ideas please???
Click to expand...
Click to collapse
Or should I just install the uk stock rom?
Im really going round in circles here and could really use some helpful advice, please :fingers-crossed:
Oh my god I've fixed it!
Finally got there in the end thanks to this tutorial phew :good:
MikeMcGrathXmen said:
Or should I just install the uk stock rom?
Im really going round in circles here and could really use some helpful advice, please :fingers-crossed:
Click to expand...
Click to collapse
Luckily I've never had to use ODIN with my Tab, however back in the days on my SGS I used it a lot.
So just a few things: you don't have a CSC file, because your tab is a Wifi only model, so don't worry about that.
Also, be sure to tick the re-partition box on the left if you are using a pit file (which at this state you should), this should repartition your internal SD and thus have a clean install.
Good luck
Thanks, but i've got it working and I'm not gonna mess round with it again.
Can't believe i finally got it working!