Alright, not too clued up, so probably should not have tried half of what I did!!!
Essentially in trying to change from Spacemooses Honeycomb Rom back to the Stock 2.3.3 (with all sorts of attempts in between an no progress), it won't go past the Samsung logo screen. Also read that a cause for this may be that I have not wiped the caches and data etc in recovery, but nothing in recovery seems to work, mounts failed, wipes failed... everything the recovery attempts is a fail! Now in trying to fix this I loaded another rom, the stock I800 Verizon I think... that starts up (nice sound), then flashes really dodgey looking lines all over, then just black and in that state only download mode was functioning, couldnt get into recovery!
So, as it stands nw, 2.3.3, stuck on samsung logo, recovery opens, but nothing works... not sure if its an ext4 or root related problem... those are just guesses though...
Help would be wonderful, I rely on this thing for varsity!!!
Thank you in advance!
Reflash stock Froyo rom, then go up to Gingerbread from there... You will probably loose all data when you restock. Hopefully you have a copy of your original rom..... Otherwise use another stock rom.
Related
i had network problems (3g stopped working, don't know why), and had an old version of doc's. so i figured i'd install the new version after a wipe, see if that'd fix it.
just to be safe, i went in recovery (clockwork) and restored an earlier backup. it worked, but still no internet. upon remembering that this was the backup i made just after installing docs, i went back to my previous backup, stock rom, i think 2.1.
this is where stuff went wrong. i hadn't disabled the lagfix (forgot which one, i remember i had ext4 as filesystem), and now, no matter what i do, my phone won't go past the boot screen. big lettering galaxy s, smaller gt-i9000 and at the bottom samsung, you know the one.
i tried everything i could imagine. wipe data/factory reset, wipe cache partition, re-restore to the oldest backup. only then did i remember the lagfix and remove it. retried all of those, still no dice.
i can get into recovery mode, both clockwork and 2e, and i can get into download mode.
when i connect my phone to my pc, it doesn't notice. when selecting mount in clockwork, it mounts, and shows the two drives in my computer, but when i try to open one of the drives, i get nothing.
i installed docs rom a while back, and have wiped my pc since then, so i have no files from that. i have installed the android sdk, but don't know how to use it, let alone how to use it with a phone that doesn't show.
all i want is to get back to stock, for now. try again from there.
can i? or have i ruined my phone?
edit:
wow... take about relief.
i used odin to flash xxjpu, 2.2.1, and it seems to have worked!
in case anyone else is stuck on a boot screen, download mode with odin means you're safe.
anyone with more sense than i showed in my stupidity, sorry for adding another semi useless topic.
So I'm trying to get my VZN Galaxy Tab back on its feet. After trying to get Gingerbread in it so I can use Netflix - and failing - I'm going through a lot of motions.
Okay. First I rooted it with Super One Click. I should have been happy with that, but noooo. Then I tried flashing GB on it (I wish I can remember which ROM I started with...it's a mess. I think the pit file was gt-p1000_mr? Does that sound right?).
When that didn't work, I went to the much-cross-posted procedure for returning it to stock using Heimdall and SCH-i800_VZW_stock. Tried it five times. Each time, it booted into the Galaxy Tab/Samsung logos, then a fast glimpse of scrambled letters for a second followed by twinkly music, then black nothingness. It would then bootloop. I attempted to boot into recovery to wipe data/cache, but I couldn't get there. Vol-Up/Pwr just brought up the logo and scrambled video again.
Since I was still able to get into download mode, I tried flashing another ROM...this one the "P1000XXJQ1_P1000XXJQ1_P1000XXJPZ" method. With this, I was able to also flash CWM so I have SOME recovery mode. Sadly, booting brings up the GT/SAMSUNG logos and I get the spacey animation, but after that, again - blackness. This time, however, the Menu/Home/Back/Search buttons light up, so something's happening in there.
Also, booting into CWM, I cannot get my sdcard to be recognized. I tried different cards, so there's something goofy with the slot itself, I'm guessing.
So nothing is really working, but since I can get into CWM and also download modes, I'm holding out hope that this is not completely bricked.
I just need to find the right method of getting it back to a functioning tablet. If anyone has any suggestions, I'm all eyes. Thanks so much.
UPDATE: I tried reflashing stock using the tried and true method. But this time, I went in and flashed CWM replacing the stock recovery which never worked for me. I got the Galaxy Tab/Samsung logo, and at long last, the animated VZW logo. Then it would bootloop there. I booted into CWM recovery and wiped the data/system and the cache from the first page. It still booted and bootlooped the same. This time, I booted into recovery, went to the mounts and storage section and formatted the system, data and cache. Opening logo only. CWM again, and got a whole bunch of "cache missing" messages. But I think I'm getting closer. Back to work.
UPDATE II: So the farthest I can get is the animated VZW logo using the combo of the stock flash through Heimdall, then flashing CWM with Odin. Still no sdcard access. Anything I should try here? Thanks.
same question here
Did anyone figure out how to restore Verizon tab?
Alright, in trying to change back from Spacemooses honeycomb port to froyo/gingerbread my tab is now stuck... when I flash the stock verizon, it wont go into recovery and just flashes scary looking lines everywhere, when I flash a 2.3.3 stock Gingerbread it goes into recovery but recovery cant do ANYTHING... fail to mount, fail to format, fail to wipe etc etc etc, with every action (even the auto ones) resulting in a red error message! If left to boot, it simply stays stuck on the samsung flashing logo!!! Obviously it seems to still manage to get into download mode each time so I have hope, but it cant do anything else!
So further research and it would seem to me that I must revert back to rfs from ext4 before attempting these roms again, if someone can tell me if this is right... or just how to do it I will try anyway... been stuck for over a week an will try anything... please help Really need to get this working asap!
hi, yes i will admit i am still very new to the whole rooting/flashing/mods etc, but i f-ed up my captivate bad... first i should tell ya how i got to the point where i am now... (dont worry will be the abridged version):
-got phone, couldnt sideload apps
-rooted phone and enabled install of sideloaded apps
-tried to backup rom/phone with clockwork, learned that i had to flash modded kernal
-backed up and flashed new kernal (flashed clockwork recovery & backed up rom)
-learned about voodoo, so reflashed a voodoo kernal
-started to have issues with static, speaker volume, basically anyone who called me or i called couldnt hear me and was all static
-reflashed different kernal
-got ballsy, backed up rom again, and all user/system data, and attempted to flash custom rom (firefly3.0)
-flash failed... tried to reflash, failed again... error said parameters did not match
-tried restoring original backed up rom, failed again, and again...
-then, boom, phone boots up and am able to make calls and receive them, cant send text though..
-scoured the forums, and tried to fix phone/restore to stock.
-flashed odin, and then BRICKED!!!!
*NOW ALL PHONE DOES WHEN I TURN IT ON IS BOOT TO ATT SCREEN AND THEN OFF, THEN ATT SCREEN, THEN OFF.. TRIED BOOTING INTO RECOVERY, DOWNLOAD MODE AND STILL NOTHING WORKS...
wondering what happened, or what i did wrong, what i can do to fix my phone (if possible)????
any of u wicked smart devs care to help out a little 'ol noob?? please
obviously its not bricked!
i hate that misnomer. you are bootlooping....
you need a jig at this point if normal means of getting into download mode do not work
(power down phone, pull battery. put battery back in, and while holding vol up+down, plug into computer.) if that doesnt put you in download mode, you definitely need a jig.
once you get that jig, flash a custom cwm kernel, then try flashing a new rom. you dont need to boot into stock, which is what you are stuck on now.
BY DEFINITION: A BRICK IS SOMETHING THAT NO LONGER POWERS ON, AT ALL
Damn beaten to the punch.
Sent From My Captivating Shanna, yes I Named My Phone get over it.
So, to make a long story, short, for the past couple of days my phone has been soft-bricked... It first happened when I attempted to flash dmodv6 in CWM. Everything looked good throughout the installation, however, when I rebooted my device, I got stuck in a boot loop where It would say "Samsung Galaxy S III GT-I8190" for a few seconds, the screen would go black, then say the same thing again... over and over and over...
After a lot of trial and error because of NOT making a nandroid backup via CWM (stupid, I know - I had made one via Titanium Backup and thought that might be good enough), I finally was able to boot. Thanks to xXPR0T0TYPEXx, I was able to flash another rom by puting my external sd card into another phone, loading another rom onto it, and putting it back in my phone. I now had Cyanogenmod10 and was able to boot back up.
I attempted to restore the Titanium Backup I had made with this new rom (stupid again, I know) and it made almost every service on the phone stop working... I desperately wanted just to get back to square one - to install stock firmware and go from there. I followed tys0n's guide on flashing stock recovery then attempted to install stock firmware... All seemingly went well - I booted up, got past the initial "Samsung Galaxy S III GT-I8190" logo and finally got hung up at the "Samsung" logo. I left it one while I went to sleep, just to see if it would eventually work... I woke up and it was still the same. I tried flashing different version of the same stock firmware but it all ended in getting hung up at the "Samsung" logo.
A major problem is that I absolutely CANNOT flash a custom recovery via Odin - it just will NOT work. Everything looks good on Odin's end - I PASS, get the (succeed 1 / failed 0) thing but am sent to stock recovery every time I do the 3 button combination. I've tried many version of CWM and TWRP.... NOTHING. I've even unticked the "Auto-Reboot" button in Odin and pulled the usb cable and battery upon completion but, but nothing ever works. The only way I was ever able to get CWM on my phone in the first place was by an in-phone app... Rom Manager, maybe? I can't remember. But, as it is, that method is out of the question.
I've learned a lot about what I did wrong so that's the only good part of all of this. Now, all that's left is to fix the thing so I can go about it right. I'm completely out of ideas, have spent almost a full 24 hours searching solutions to this problem and I am at wits end...
I just want to get back to stock firmware... Any ideas, guys? Should I go about re-partitioning my device at this time?
I have the PIT file... but I'm not sure as to which firmware to choose. I imagine a firmware that is 4.1.1 like my phone was... but I'm not sure about the region. I live in the US and there is no US or North American region firmware version.Can anyone shed some light on which one I should choose?
My SSN underneath my battery say "GTI8190GSMH".
I'm sorry this is so long, I just wanted to explain what happened as best as I could. So, should I go about re-partitioning my device at this point? If so, what firmware would you recommend for my model? Are different region versions okay for a this method?
Or is there another way?
Thanks, guys. :silly:
Some additional details (if it will help): I can, indeed, boot into both recovery and download mode. I just can't seem to flash a stock rom that will boot past the "Samsung" logo.
I've even attempted to flash the param file after the rom flash but it didn't help.
AffectiveEffect said:
Some additional details (if it will help): I can, indeed, boot into both recovery and download mode. I just can't seem to flash a stock rom that will boot past the "Samsung" logo.
I've even attempted to flash the param file after the rom flash but it didn't help.
Click to expand...
Click to collapse
Do you have the stock recovery now instead CWM? If yes do (if you didn't try it) a factory/data reset and wipe cache but it will delete your pics, music etc on your internal storage too.
xXPR0T0TYPEXx said:
Do you have the stock recovery now instead CWM? If yes do (if you didn't try it) a factory/data reset and wipe cache but it will delete your pics, music etc on your internal storage too.
Click to expand...
Click to collapse
Yeah, I have stock recovery now and I have tried that many, many times... Even if I install something like CyanogenMod, it still gets hung up on the CyanogenMod boot screen... And if I boot a stock firmware, it gets hung up at the same place at the "Samsung" logo...
I have an idea that one of the only options left is a PIT re-partitioning... If so, how would I properly go about that? Load the PIT file and the stock firmware in odin? Or only the PIT as PDA? I've heard a couple of different things and am unsure.
AffectiveEffect said:
Yeah, I have stock recovery now and I have tried that many, many times... Even if I install something like CyanogenMod, it still gets hung up on the CyanogenMod boot screen... And if I boot a stock firmware, it gets hung up at the same place at the "Samsung" logo...
I have an idea that one of the only options left is a PIT re-partitioning... If so, how would I properly go about that? Load the PIT file and the stock firmware in odin? Or only the PIT as PDA? I've heard a couple of different things and am unsure.
Click to expand...
Click to collapse
I don't know about PIT files but some people got this message : "CUSTOM PIT BINARY" in recovery mode after flashed a PIT file (maybe they used a other PIT file that wasn't compatible). So make sure you use a PIT file that is GT-i8190 compatible.
I tried flashing the PIT file for the hell of it because I am completely out of ideas.... It failed repeatedly in Odin.
I have no clue on how to fix this... I've tried countless roms and they all get stuck on their respective boot screens. The only one that gave me a glimmer of hope was Cyanogenmod10.2.... It went as far as saying "Android is upgrading" and showed "starting apps" but it got hung up there.
I don't know what to do, guys. Someone help!!!
AffectiveEffect said:
I tried flashing the PIT file for the hell of it because I am completely out of ideas.... It failed repeatedly in Odin.
I have no clue on how to fix this... I've tried countless roms and they all get stuck on their respective boot screens. The only one that gave me a glimmer of hope was Cyanogenmod10.2.... It went as far as saying "Android is upgrading" and showed "starting apps" but it got hung up there.
I don't know what to do, guys. Someone help!!!
Click to expand...
Click to collapse
Use a custom ROM to see if it will fix the problem .Try to flash CyanogenMod 10.2 by NovaFusion via odin or if you flash CyanogenMod 11 then you will automatically get the TWRP recovery. NovaFusion Team Homepage : novafusion.pl. I know you want the stock ROM but try other ROMs to get a booting phone again
xXPR0T0TYPEXx said:
Use a custom ROM to see if it will fix the problem .Try to flash CyanogenMod 10.2 by NovaFusion via odin or if you flash CyanogenMod 11 then you will automatically get the TWRP recovery. NovaFusion Team Homepage : novafusion.pl. I know you want the stock ROM but try other ROMs to get a booting phone again
Click to expand...
Click to collapse
I have... I've tried numerous stock roms and numerous custom roms... all versions of Cyanogenmod, Chameleon, Carbon, Slim mod, etc... They all get stuck at their respective logos.
I even tried the Cyanogenmod with TWRP but, as I explained earlier, I absolutely CAN NOT flash a custom recovery unless I use what ever app I used.... It doesn't work with Odin or with a rom. I don't know why.
I wish someone had more info on repartitioning my phone and if it would help.
NEED HELP?
AffectiveEffect said:
So, to make a long story, short, for the past couple of days my phone has been soft-bricked... It first happened when I attempted to flash dmodv6 in CWM. Everything looked good throughout the installation, however, when I rebooted my device, I got stuck in a boot loop where It would say "Samsung Galaxy S III GT-I8190" for a few seconds, the screen would go black, then say the same thing again... over and over and over...
After a lot of trial and error because of NOT making a nandroid backup via CWM (stupid, I know - I had made one via Titanium Backup and thought that might be good enough), I finally was able to boot. Thanks to xXPR0T0TYPEXx, I was able to flash another rom by puting my external sd card into another phone, loading another rom onto it, and putting it back in my phone. I now had Cyanogenmod10 and was able to boot back up.
I attempted to restore the Titanium Backup I had made with this new rom (stupid again, I know) and it made almost every service on the phone stop working... I desperately wanted just to get back to square one - to install stock firmware and go from there. I followed tys0n's guide on flashing stock recovery then attempted to install stock firmware... All seemingly went well - I booted up, got past the initial "Samsung Galaxy S III GT-I8190" logo and finally got hung up at the "Samsung" logo. I left it one while I went to sleep, just to see if it would eventually work... I woke up and it was still the same. I tried flashing different version of the same stock firmware but it all ended in getting hung up at the "Samsung" logo.
A major problem is that I absolutely CANNOT flash a custom recovery via Odin - it just will NOT work. Everything looks good on Odin's end - I PASS, get the (succeed 1 / failed 0) thing but am sent to stock recovery every time I do the 3 button combination. I've tried many version of CWM and TWRP.... NOTHING. I've even unticked the "Auto-Reboot" button in Odin and pulled the usb cable and battery upon completion but, but nothing ever works. The only way I was ever able to get CWM on my phone in the first place was by an in-phone app... Rom Manager, maybe? I can't remember. But, as it is, that method is out of the question.
I've learned a lot about what I did wrong so that's the only good part of all of this. Now, all that's left is to fix the thing so I can go about it right. I'm completely out of ideas, have spent almost a full 24 hours searching solutions to this problem and I am at wits end...
I just want to get back to stock firmware... Any ideas, guys? Should I go about re-partitioning my device at this time?
I have the PIT file... but I'm not sure as to which firmware to choose. I imagine a firmware that is 4.1.1 like my phone was... but I'm not sure about the region. I live in the US and there is no US or North American region firmware version.Can anyone shed some light on which one I should choose?
My SSN underneath my battery say "GTI8190GSMH".
I'm sorry this is so long, I just wanted to explain what happened as best as I could. So, should I go about re-partitioning my device at this point? If so, what firmware would you recommend for my model? Are different region versions okay for a this method?
Or is there another way?
Thanks, guys. :silly:
Click to expand...
Click to collapse
i got same problem with you before im wayback dmod v6 before and stuck at samsung logo i just try hard reset
1. open your phone
2. remove battery and put the battery try and try til u get in recovery mode (CWM) maybe just tried almost 20x restarting in logo til u in CWM :victory:
3. re-Flash your dmod v6 this way for dirty rom like what i said (softbricks)
4. just flash another new rom whatever u like or dmod v6.
5. I HOPE IT HELPS DONT FORGET TO THANKS <3 :highfive: