Guys,
Is it just me having a problem with semaphore 1.5.0 JVR? i am on darky 10.2 RE and flashed 1.5.0 JVR with SGS kernel flasher and in 1 hour of hardly any use the battery has gone down by 20% and it's hot at the back!!
any help on this please?
THANKS
If you use DarkyRom the best results are with speedmod kernel or/and Darky's default, other i do not now for this rom, i never tested. Semaphore is a good GB kernel, i recommend some charge cycles, if the results remains change the kernel.
Maibe it depends of wich programs are running on in background. you should to download gemini app manager from market free and in expert mode you can see wich program got the autoboot run setup and you'll be able to put them on Off.
Related
I used Darky 9.3 + recomended voodoo kernel (no lag fix)
my phone frezze once time when I played around by turning On/Off wifi GPS + google maps; frezze at the point that I must to restart it by long click on the power button.
I switched voodoo to speedmod k13c 250Hz (always on Darkyy 9.3) since 3 days. And repeated the test with Wifi/GPS/3G google map on/off... everything is very smooth as it should be..
ATM I do not turn on speedmod tweaks because I did not see any different (smothness + bat life) with tweaks (voodoo does not have tweaks either)
So, what is the problem of Speedmod k13c on Darky 9.3?
I read it from Darky forum
Hi there
Videocalls work perfectly in this ROM.
I really recommend Voodoo as your kernel. It's stable and easy.
We will fully concentrate on Voodoo.
SpeedMod is gonna have a hard time in the future with v9.3.
Sorry to say this.
It's a bit like the Internet Explorer of the Webbrowsers...
We have to make workarounds (which delays the ROM releases) for SpeedMod because it doesn't use standards... Partitions etc. you know.
Will write more when v9.3 Final is here.
It's not about my personal preference. I also used SpeedMod for a while.
It's just that we discovered several issues with SpeedMod and a fixed recovery.
In the final, SpeedMod users will nees to have lagfix ON and tweaks OFF. else the partitions aren't gonna work properly.
I've nothing against SpeedMod, I like hardcore and his whole effort. =)
If hardcore would fix the strange mounting (which also can cause boot loops on every ROM if used with a certain configuration).
You guys will always have the choice to use any kernel.
We just take some logical steps to make it easier for the masses / beginners.
...[/COLOR]
It seem that the only problem with Speedmod is the Recovery (and some mounting problem) while installing darky rom, but there is no problem on normal usage. am I right? what do you think about this combination? someone have any problem with it?
i am using darky 9.3 and hardcore speedmod.. so far so good. just tat the batt life is abit.. er... u know..
i might try out doc's rom one day to see the diff.
I have Darky with Speedmod and it's work fine !
I have 9.3 final with k13c as well. battery is alright I think, I'm at 56% after moderate use after 1 d 1 h of up time.
Using Darky's v9.3 + Speedmod k13c ... all running smooth as silk with lagfix enabled aswell.
Darky 9.3 and SpeedMod K13C....awesome combination!
Folks....Darky 9.3 and SpeedMod K13C....awesome combination..believe me ...not a single issue so far since I upgraded to 9.3. Its Smoother...Snappier.... everything u want your phone to be at in terms of performance...... I enabled the Lagfix as well as the Tweaks and also set the Brightness Level setting to Normal....getting 30hrs juice outta my battery with heavy usage....TD Synch every 10 mins...FB, lot of Gtalk chat...i clock 35% on Voice calls....WiFi usage for an hour or so FB, Gmail synching up regularly too...what can I say...
ps: Flashed XWJV1 modem yesterday and I'm just about to be convinced that this modem is surpassing the performance given by XXJPY....
I'm trying to run the Speedmod kernel [K13E HPCall VoodooSnd7 SharpnessFix STABLE] on Darky's rom 10.1.
When i start my phone he freeze on the Galaxy S logo, What can i do about it?
have you checked if speedmod kernel is compatible with darkys 10.1 ?? 10.1 is gingerbread right ? so ordinary speedmod wont work, unless its made for the gingerbread base.
It is gingerbread indeed. I want a good kernel on my phone that is good for my battery, after a lot research i found out speedmod was one of the best..
Where can i find out what kernel can run on darky 10.1 gingerbread?
why not try the fugumod kernel, ive heard exceptional things about it since its last update, and no-one has reported the Android OS drain at all with this kernel !!
if MIUI supported it, i would definitely try it out, but i cant bare to part with the MIUI ROM, its awesome
to find out what kernels are supported, ask darky himself, or just browse his thread
I gonna try the fugumod kernel, i will let you know if it works!
Alright im running the fugumod kernel on my phone now!
Is there anything about best settings on the net?
I only thing the time between applications and the application list is taking a little to long..
have you converted to ext 4 ? what other tweaks are in CWM you can select ?
i dont know what its like ive never used it
I downloaded the Fuguappfree from the market, when i open this app on my phone i can choose the following thing:
/system jfs or ext4 (set on jfs automatically)
/data jfs or ext4 (set on ext4 automatically)
/dbdata jfs or ext 4 (set on ext4 automatically)
/cache jfs or ext4 (set on ext4 automatically)
in cwm i cant select anything, i even cant find anything like lagfix.. :S
still droping 10% an hour...
dont know what to do, maybe a flash back 2 darky 9.5 an option?
firstly do the battery calibration, it can take upto a week for the battery to settle in after flashing different firmwares.
its hard to judge battery life on a ROM that hasnt settled, Also, check battery stats and see what the biggest battery drainer is.
then we can go from there
Alright,
Im now on Darky 10.1 with Dark Core 2.5...
Today i will let my battery die to 0% and do the calibration.
After that i will post my battery stats, i hope you can help me to analyze!
no probs keep us informed of your findings and we will fix you up
I found latest bleeding edge ultra to be brilliant, running all on jfs, try the fugutweaks .zip too, and buy fugu app for more options and to support dev...and lastly...read installation instructions
Sent from gt i9000 insanity 8.5/fugumod
I downloaded the FuguMod 4.0 ultra,
but what to do with the fugutweaks.zip?
will the fugumod 4.0 make my battery life better, or just better preformance with worser battery?
-------------------------------------------------------------------------------------------------
Installed, and its running blazing ****ing fast!
I still didnt do anything with the fugutweaks.zip because i dont know how to?
But this kernel is the best ever i tested on preformance
I also noticed when i restart my phone, the language ''Dutch'' changes automatically to English, also the USB connection i standard put on connect with PC changes to connect Kies,
The second problem is i have to wait almost 5 min before my gps works..?
Do you know what the problem is?
Hi, just flash the zip in recovery, gps always problematic, search for various fixes
GTi 9000 insanity007/insane glitch
I want to change kernal so I can over-clock, the supermod kernal which was included with Simpley Honey is ok, but not that fast.
So I need your opinion on something maybe "Voodoo" but is an easy flash with Odin, but wont brick my phone, last time i flashed supermod on its own via odin i soft bricked my phone, but that was not with Simpley Honey.
So suggestions and links are most appreciated
Try semaphore kernel.
Galaxian is the best
Sent from my sgs
kernel: galaxian
Rom: jetpack
The TOP 3 are:
Semaphore
Talon Kernel 4.4.21
Galaxian
Thanks folks, now, in the past when i have changed kernals with odin, i have ended up soft bricked. Am i safe to go from current dark core kernal to one of the above ?
Talon comes in CWM package and its been safe for me. I have been trying it from 4.3 versions. So far all's been good. Try Talon 4.4.21
Hi
I've been using the Stock 2.3.4 (JVP) ROM, with CF-ROOT 3.7 (JVP based) Kernel (for root privileges) for a long time now...
Now, I wanted to try the Semaphore Kernel (for voodoo sound, better battery life, etc).. but, the latest Semaphore Kernel is a JVT based Kernel.
So my question obviously is, Can i flash the latest Semaphore Kernel (1.9.0) over my existing JVP based ROM without any issues??
if not, what would be more productive, Switching to a JVT ROM altogether? OR Finding some older version of Semaphore for JVP?
(I really dont wanna loose all my apps etc, its too cumbersome to install them again even if its using the titanium backup..)
(then again, an older version of kernel wont be supported, and may cause issues..)
dont know much about JVP but i've tested stock JVS rom before together with TalonDEV, Galaxian & Semaphore kernels respectively and had no problems.
TalonDEV is ext4 autoconvert
Galaxian is compatible with ext4 (convert manually)
Semaphore is compatible with ext4 (convert manually)
I'm on Semaphore now, running flawlessly.
Thank you
Do you know if the latest semaphores 2.1.1 can be flashed over stock JVT?
i have gone back to my stock rom (jvo for stability) is there any way which i can overclock this rom , i was running ics at 1.4 ghz is there away for that overclock on stock
as far as I know, there is no possibility to overclock if you want to keep the stock kernel... however, you may use a different kernel (such as Midnight 0.9.0 or Semaphore 2.5.0). They come with an own settings-application which lets you overclock at least to 1200Mhz...
On a different but not unrelated topic, you may want to flash JW1 or JVT if you go for stability, they are more stable than JVO.
And I can say, JW1 in combination with Midnight kernel works pretty good, battery life is awesome and you can overclock (if you want to, that is)
got any software for overclock?
i am newbie...
If you will root your phone, you can use the app "tegrak overclock".
its free in the play store.