Hi,
Because of my poor English, I will briefly present my problem.
Yesterday, i have made hard reset of my Xperia X1. After this move, my phone's keyboard and all other buttons aren't working. Even my screen won't turn around when I slide up my phone. "OK, it will be good after soft upgrade" - that's what I thought. But how can i do this if i have to:
"Hold the volume down button and turn the device on again, still holding both buttons until the 4-color screen shows up."
During my keyboard issue? When I'm pressing the "volume down button" my phone is not reacting.
Thanks for help, and please understand my English level.
lukas1353 said:
Hi,
Because of my poor English, I will briefly present my problem.
Yesterday, i have made hard reset of my Xperia X1. After this move, my phone's keyboard and all other buttons aren't working. Even my screen won't turn around when I slide up my phone. "OK, it will be good after soft upgrade" - that's what I thought. But how can i do this if i have to:
"Hold the volume down button and turn the device on again, still holding both buttons until the 4-color screen shows up."
During my keyboard issue? When I'm pressing the "volume down button" my phone is not reacting.
Thanks for help, and please understand my English level.
Click to expand...
Click to collapse
You can try install a rom via Active Sync/WMDC, just connect X1 to PC via Active Sync mode, rename your *.nbh ROM to "ruu_signed.nbh" and run CustomRUU.exe from PC
I did it, but the keyboard is still not working.
Related
I bought my friend's Blue Angel with WM5 upgraded, and found that Power button is ok. I can turn on, soft reset or press to shut the light off, but cannot shut down Windows. I have to use software Spb Plus shut down button instead.
I thought if i down the rom to Win 2003SE, it should be fixed. But it's not. The Power button still has the same problem. I cannot shut down.
Please help, how can i fix this.
Thx.
What happens if you just press Power for short moment as you do with all other buttons and you wait a second?
When I pressed Power button for a moment, the light is off. But when I press and release, nothing happen.
Long press = turn off backlight, this is normal.
But after short press it should go asleep - maybe button is worn out slightly and youi just need to press is stronger?
and of course try hard reset before - if you can do it (it involves pressing reset!) means button is ok, and there is something else. Anyway if after HR still button doesn't work correctly, I have no idea what it can be.
jakubd said:
Long press = turn off backlight, this is normal.
But after short press it should go asleep - maybe button is worn out slightly and youi just need to press is stronger?
and of course try hard reset before - if you can do it (it involves pressing reset!) means button is ok, and there is something else. Anyway if after HR still button doesn't work correctly, I have no idea what it can be.
Click to expand...
Click to collapse
I did as you said.
Long press --> turn off backlight --> ok
Soft Reset --> ok
Hard Reset --> ok
Short press --> go asleep --> don't wok
Hard press -> for asleep --> don't work
or power button damage, but why other action with this button is ok except short press for asleep. --a
Sorry my English is not good
I have the exact same problem, no I dea what has caused it?
The XDA will not power down any more.
I will try reflashing to see if this will rectify it.
I must admit altough many people have put an enormous amount of work into adapting WM5 rom to suit the Blue Angel .I have all but given up with the WM5 roms short comings (WiFi , Bluetooth ,Instability ect)
So its goodbye XDA2S and hello Nokia N95
Anyone can help? Please.
I have exact the same problem. I CAN NOT shut the device down by pressing (short) the power button. I have to use Spb-plus which has a "Shut down" icon shown on the Today screen to do the trick.
Is there any fix to use the power button on the device to do what it is meant to do?
Thank alot!
Maby this can help
Hi.
I had the exact same problem and have searched an read. no solution until last night.
My phone hung after some fiddeling with tomtom, and i popped the battery. i switched it on, and for some reason i decided to turn off the backlight during boot. So power on- wait 1-2 sec - hold power button until backlight goes off. the screen flashed a couple of times and then after boot had finnished it worked again. HORRAY.
Before this i have tried soft/hard reset ++ but nothing worked. so im really happy...
Give it a try, and let me know.. i know a lot of people have this problem.
wow mate...i dunnno how...but it seems it worked for me...thanks...
Hi guyz,
big problem with my Wings...
I've tried to install SPB Traveller, discovering that doesn't work (was the version for pda).
Then i've disinstalled it and, immediately after, i have no more possibility to press buttons. Only once.
To be more precise...
Switch off the phone removing battery, switch it on again, enetr the pin correctly and, after WM6 screenshot, i'm able to press buttons only once. Not depending from the button...i can pres Start or Contacts, doesn't matter.
After pressing once there's no evidence to have any other button depressed.
I would like to hard reset the phone but, hao can i do if i cannot press any button??
Which is right procedure for hard reset the S730??
There is some shortcut in way not to enter into WM6??
Thanks a lot.
With the phone off, press both softkeys (the ones right under the screen) and then press the power button to turn it on. After a second or so (basically when it starts booting up) release only the power button, but keep the other two pressed.
After a moment you should see a screen asking you if you want to hard reset (you may release the buttons now), press the Send buttont (the green one) and it'll do it.
Soft keys should be "Start" and "Contacts"...i suppose.
I tried many times, releasing Power button keeping softkeys still pressed, immediately after Smart Mobility screenshot....after displaying of radio version, rom version, etc etc.....but it doesn't work.
I think i'm wrong in some passage. Sure that this process works on S730??
Could you be more clear about it, please?
Which boot i have to take care of? Initial settings (radio, rom, etc etc) or Windows Mobile?
Many thanks.
Yep, those are the buttons. And this procedure does work on the S730, as I had to use it once to restore my phone.
The only advise that comes to my mind is to keep the power button pressed a little bit longer than usual, I believe that's what I did.
hi, please! need help... after I've flash the
Wizard_Love_2.26.10.2_WWE_Novii_CF2 on my G3 device the rom is very slowly and my PC doesn't recognized my wizard when it connected with the USB cable.
any solution how can I change this rom?
many thanks
i can go to the tri-color bootloader mode, is it say somthing?
mine did that yesterday....maybe try a hard reset:
Hold down the Comm Manager button(top left) and Voice Command button(top right) buttons while performing a soft-reset (depress the reset button using the stylus); after you depress the soft-reset button, [contintue to hold the two side buttons] hold down the navigation pad for ~4 seconds until you are prompted on screen [you can release the side buttons now]. Press the Send (Talk) button (i.e. the left telephony button) - or whichever button your system prompts you for.
That's what I did and it worked for me =)
thanks but it doesn't work, the main problem is that after the hard reset the rom is very very slowly (like 7-8 seconds from the moment you tap the "start" till the start menu come)
the PC doesn't recognized my wizard so i can't change to another rom....
I can get into the tri-color mode, does it say that maybe it's not bricked?
I am using the ROM [ROM][29JAN10]Gen.Y D2X R2.1[WM6.1 21056][UC][SENSE2.5][WWE|GER|NLD|ITA|FRA|SPA] with Radio version:1.13.25.24
I have to mention that the problem begin using the ROM [ROM][22JAN10]Gen.Y D2 R5.3[WM6.1 21056][UC][SENSE2.1][WWE|GER|NLD|ITA|FRA|SPA].
I made a hard reset on my HTC Touch Diamond because the GPS was not working. After that I began to experience strange things with my device, the screen was starting blinking if I was pressing the action button or any button from the device - if I make a soft reset the device says ''HTC Touch Diamond'' ok, after that is the welcome screen of the ROM, but after that the screen of the device goes off and I need to press the power button several times to see anything on the screen. After that if I am trying to access anything using the buttons from the device, the image on the screen starts to blinking and only if I press the power button to turn off the screen and after that to press again the power button to turn on the screen, the screen comes to normal. Until making the hard reset I never had this kind of problems. What is happening with my device?
These look like software problems. Have you tried flashing a non-Gen.Y ROM?
~codeslicer
I would try that if I even could connect the device to my computer and be recognize. I don't know what happened either with the computer or either with the device because the device is not recognize by the computer.
Hi,
Diamond is not going to bootloader (tricolour) screen after MTTY. MTTY was successful but nothing happening after pressing volumedown+center button.
Now device is just showing - Touch diamond when i switch on.
I have diamimg.nbu on internal storage, is there any way to trigger install.
It was working fine before mtty.
Pull battery out to turn it off.
Put it back in.
Press and hold volume down
Press reset button.
The reason its only showing Touch Diamond is that the MTTY process has cleared off your previous OS. You need to get it back to bootloader and try MTTY again.
I have tried all those stuff but no luck, for every thing diamond just vibrates and shows "Touch Diamond".
I guess boot loader is not working, is there any way to connect to it and repair bootloader.
I have tried snoopy from some post but thats also of now help.
Taken from PPCGeeks:
"Hold down the Volume down key and power button, the take the tip of your stylus and press the soft reset button (bottom left corner of phone under battery cover). After you press reset button keep the Volume down and power button press until the bootloader screen comes up"
Let us know if this works.
Thanks Super....
This is not working, only option i see is some way to connect to it through USB because i had faced this problem earlier also but that time RRU updater used to push it to bootloader.
volume down button used to work only with original HTC ROM for me....only a few time it used to work with cooked ROMs....
Hi,
Anyone can suggest some advance tool which can connect to diamond if its not going to bootloader through normal methods.
Its all clear by MTTY, i have ROM image on internal storage.
Solved finally.......
Hold only volume button pressed, press reset button and immediately after that press ok or back button