[Q] How to install JVR modem on cyanogen? - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi,
I am on the latest cyanogen mod for Galaxy S I9000. I wanted to install XXJVR modem on it. Using ODIN, I flashed JVR modem on it. Now, i cannot connect to the mobile network, baseband is unknown.
What is the procedure of flashing JVR modem on cyanogen?

harshaxp said:
Hi,
I am on the latest cyanogen mod for Galaxy S I9000. I wanted to install XXJVR modem on it. Using ODIN, I flashed JVR modem on it. Now, i cannot connect to the mobile network, baseband is unknown.
What is the procedure of flashing JVR modem on cyanogen?
Click to expand...
Click to collapse
LOL, You are a winner. FAIL OF THE YEAR.
Ok, Answer is > http://forum.xda-developers.com/showthread.php?t=1158783 find there a JVR modem, and flash it via Recovery

Thanks for the quick reply. I am trying it now and update once done.

Dfolt,
Thanks a tonn. Things are working fine now. I did not realize the fact that I must not use ODIN for flashing the modem for cyanogen and another mistake I did was that I took the modem from stock XXJVR.

and, 1 thing, dont flash modems (if u are using cyanogenmod) via Odin .
Modems for CM7 are flashable only via Recovery

Hi,
here you find a lot of modems and bootloader for cm7-->
http://forum.xda-developers.com/showthread.php?t=1158783
MfG

Related

[Q] Installing jpe modem

Hi,
i am currently running Darky 9.0.2 (which is by the way just awesom!!).
I was wondering if i could enhance my battery life by using another modem than the JPY which is the fundament of darkys rom.
I've heard that jpe is considered to be much less battery draining than jpy, is that correct?
If yes, can i just put the modem of jpe in modem port of odin and flash (without) repartition? Or does it not work if i am on darkys which is based on jpy?
Where can i get the modem?
Thanks for your answers =)
kind regards
Than
How would you remove the modem file from the rest of the .tar file? as far as I can find all firmware files seem to come as one .tar file that you use in PDA to flash.
From where i read somewhere else, JP5 modem is good for battery life.
Go to docs thread, and under the modem section you will see various ones. Choose the one you want then flash via clockwork recovery.
Sent from my GT-I9000 using XDA App
Can somebody post exact link to JPE modem? Many thanks...
Is it possible to update JPE modem file via ROM manager -> Install ROM from SD card and than choose update.zip with ONLY modem file?
I am asking because I cannot access to CWM on my rooted official Froyo 2.2.1 since it has Samsung Recovery, version 3e which does not support loading update.zip files?
I am waiting for experts and helpful answers. Thanks.
Just to recovery mode than flash JPE modem that's it
I personally use JPE modem which is great compared to ther modems I tried
at the moment my fone is being unpluged for 38hrs with 36% battery left
Stile35 said:
Is it possible to update JPE modem file via ROM manager -> Install ROM from SD card and than choose update.zip with ONLY modem file?
I am asking because I cannot access to CWM on my rooted official Froyo 2.2.1 since it has Samsung Recovery, version 3e which does not support loading update.zip files?
I am waiting for experts and helpful answers. Thanks.
Click to expand...
Click to collapse
root ur device via Odin that shd get u back to 2e than apply update zip? Is that what ur after?

Flashing modem XXJPY over XXJVE

Hi!I'm back on darky 9.5 (after trying v10 rc4) and I remember a much better battery life on this...the only difference is that the first time I had a different modem: XXJPY.
So, can I flash XXJPY directly over the newest XXJVE? can i do that simply via CMW or do i have to flash with odin?
Thanks!
Modem can be flashed on top no problem. Odin or zip with CWM is fine either way.

Would jvo modem work on froyo2.2?

Hi I have stock rom of froyo 2.2 (this one on the link)
http://forum.xda-developers.com/show...&highlight=kc1
i really dont like the kc1 modem i was wondering if JVO modem would work.
It said its for CWM3
but can that be just flashed using odin ??
or do i have to have Clockwork mod 3?? how do i install this?? I checked my recovery (stock recovery) and it seems like the stock recovery is 3e version.. :S
how do i install cwm3 if i have 3e version..
I upgraded to GB using this thread
http://forum.xda-developers.com/show...1#post13566808
and upgraded to JVO modem using recovery update thingy
modem was great (GPS locks fast etcs) but it was too unstable (i prob did something wrong while installing it? i dono ) :and it kept shutting off the phone
so i installed the stock 2.2 froyo ugkc1
please help me
thanks
In my experience modems are pretty interchangable. I like the KC1 modem myself for Bell it seems to work the best. Maybe it depends on your area.
Follow this thread to flash modem for CWM any version.
http://forum.xda-developers.com/showthread.php?t=876391
If you are running Froyo then you will want to stick with CWM2 I think. Speedmod is an easy way to get this. If you want to use a modem file that is not listed on that link you can download any CWM2 zip file and open it and insert your modem.bin into it. Then flash that using CWM.
Hi thank you for your reply.
I dono where to downlaod the JVO modem with CWM2 version
also if i use speedmod will I get CWM2? even tho i have stock e3 recovery installed??/
Yes, speedmod will give you CWM2. Just download speedmod for ODIN and flash it as PDA. It will work on all froyo builds.
http://forum.xda-developers.com/showthread.php?t=822756
To get the modem file just extract the modem.bin out of the CWM3 zip file you have. Then download any CWM2 modem zip file and put that modem.bin into it. The only difference between those files are the modem.bin inside them.
I wish I knew a way to flash just the modem.bin with ODIN. There may be a way, but I have not found it yet. CWM is the only documented way that I have found unless the ROM comes in 3 parts. Then you can just flash the PHONE portion with Odin.
One other trick I did was I flashed with a ROM that included the modem that I wanted, then used Odin to upgrade to JVH but didn't flash the Phone portion, just the PDA and CSC. This worked good and didn't require CWM or rooting at all. Now I have a 2.3.3 stock ROM with a custom Modem without any hacks.
-start Odin.
-Select "phone" and fetch the modem.bin file.
-Only thing checked should be "Auto Reboot"
-Put phone in download mode
-Plug in USB
-hit Start
Awesome, Thanks Pr3torian. I have thought about doing that a few times but wasn't sure it would work. I always figured it was that easy but could not find any documentation to support it. All the Phone downloads are always md5 or zip format so didn't want to brick my phone.

[Q] i9000 rom for i9000t

hey guys just wondering if it was possible to use an i9000 rom on an i9000t?
Thanks
Look they are basically same thing, only different is its modem so, what you can do is download stock rom for your device after unzipping u will find a file naming MODEM, you can use this file to flash your phone after you had flashed i9000 rom by using odin in PHONE section without ticking re-partion.
Remember first flash i9000 rom you like then flash again MODEM of i9000t.
Not sure about putting an I9000 ROM on a I9000T, but from experience i do know you can't put a I9000T ROM on a I9000.

[Q] Bootlooping Problem in Galaxy S I9000

Hi,
I have a problem when trying to flash my galaxy s and install ICS Dark night v5.5.
When I try updating the kernel using ODIN, my phone gets into bootloop.
It is a froyo installed phone. Also, I am unable to get recovery mode. It enters download mode though.
Can anyone help me out in this??? I am very new to this stuff... I am a beginner...
Held up in this for a couple of weeks.....
Thanks,
Sridhar
If you can boot into download mode, use ODIN to flash a stable rom, then get CWM and your back to where you were, hold off the nightly builds or post in the Cyanogenmod official thread or forums.
Thanks a lot... That did work.. But now i have got Mobile network not available error after flashing.....
Probably best to mention which version of software you are using and the source...
Best option is to flash stock gingerbread version via Odin.
www . theandroidsoul . com / xxjvu /
sorry can't put correct address in yet dont have enough thanks...
it would be better to update to any stable stock rom, go to sammobile.com...
i suggest you update to the latest firmware or ics stock rom for i9000 via odin then root that firmware you have chosen(CF-ROOT) and then update the custom rom darknight v5.5 via cwm...
I think you need gingerbread bootloaders for ics.. You were on Froyo, so it won't work.. You'll need to install a stock gingerbread rom with the pit file and repartition.. After that you can try an ics rom..
I found this thread. After attempting to get CM9 onto my S it wouldn't boot so I used odin to install a stock from from sammobile but now the phone just boot loops.
Could someone please help me.
More info:
After the odin flash - I get a screen like the recovery menu saying things such as "E:Format_volume:rfs format failed on /dev/block/stl10" and things of a similar nature - will have to see what the others say.
Any ideas?
You probably flashed a rom without bootloaders. Try flashing a 3 file rom from here and repartition with 512 pit.
http://forum.xda-developers.com/showthread.php?p=14273101
Sent from my I9000 running JW5 with Dmore3.3 and Semaphore 2.7.4
Thank you. Will try that tonight
Sent from my GT-I9000 using XDA
vanisleryan said:
You probably flashed a rom without bootloaders. Try flashing a 3 file rom from here and repartition with 512 pit.
http://forum.xda-developers.com/showthread.php?p=14273101
Sent from my I9000 running JW5 with Dmore3.3 and Semaphore 2.7.4
Click to expand...
Click to collapse
Thank you sooooo much that worked an absolute treat.
Sent from my GT-I9000 using XDA

Categories

Resources