[Q] i9000 rom for i9000t - Galaxy S I9000 Q&A, Help & Troubleshooting

hey guys just wondering if it was possible to use an i9000 rom on an i9000t?
Thanks

Look they are basically same thing, only different is its modem so, what you can do is download stock rom for your device after unzipping u will find a file naming MODEM, you can use this file to flash your phone after you had flashed i9000 rom by using odin in PHONE section without ticking re-partion.
Remember first flash i9000 rom you like then flash again MODEM of i9000t.

Not sure about putting an I9000 ROM on a I9000T, but from experience i do know you can't put a I9000T ROM on a I9000.

Related

[Q] Installing jpe modem

Hi,
i am currently running Darky 9.0.2 (which is by the way just awesom!!).
I was wondering if i could enhance my battery life by using another modem than the JPY which is the fundament of darkys rom.
I've heard that jpe is considered to be much less battery draining than jpy, is that correct?
If yes, can i just put the modem of jpe in modem port of odin and flash (without) repartition? Or does it not work if i am on darkys which is based on jpy?
Where can i get the modem?
Thanks for your answers =)
kind regards
Than
How would you remove the modem file from the rest of the .tar file? as far as I can find all firmware files seem to come as one .tar file that you use in PDA to flash.
From where i read somewhere else, JP5 modem is good for battery life.
Go to docs thread, and under the modem section you will see various ones. Choose the one you want then flash via clockwork recovery.
Sent from my GT-I9000 using XDA App
Can somebody post exact link to JPE modem? Many thanks...
Is it possible to update JPE modem file via ROM manager -> Install ROM from SD card and than choose update.zip with ONLY modem file?
I am asking because I cannot access to CWM on my rooted official Froyo 2.2.1 since it has Samsung Recovery, version 3e which does not support loading update.zip files?
I am waiting for experts and helpful answers. Thanks.
Just to recovery mode than flash JPE modem that's it
I personally use JPE modem which is great compared to ther modems I tried
at the moment my fone is being unpluged for 38hrs with 36% battery left
Stile35 said:
Is it possible to update JPE modem file via ROM manager -> Install ROM from SD card and than choose update.zip with ONLY modem file?
I am asking because I cannot access to CWM on my rooted official Froyo 2.2.1 since it has Samsung Recovery, version 3e which does not support loading update.zip files?
I am waiting for experts and helpful answers. Thanks.
Click to expand...
Click to collapse
root ur device via Odin that shd get u back to 2e than apply update zip? Is that what ur after?

Would jvo modem work on froyo2.2?

Hi I have stock rom of froyo 2.2 (this one on the link)
http://forum.xda-developers.com/show...&highlight=kc1
i really dont like the kc1 modem i was wondering if JVO modem would work.
It said its for CWM3
but can that be just flashed using odin ??
or do i have to have Clockwork mod 3?? how do i install this?? I checked my recovery (stock recovery) and it seems like the stock recovery is 3e version.. :S
how do i install cwm3 if i have 3e version..
I upgraded to GB using this thread
http://forum.xda-developers.com/show...1#post13566808
and upgraded to JVO modem using recovery update thingy
modem was great (GPS locks fast etcs) but it was too unstable (i prob did something wrong while installing it? i dono ) :and it kept shutting off the phone
so i installed the stock 2.2 froyo ugkc1
please help me
thanks
In my experience modems are pretty interchangable. I like the KC1 modem myself for Bell it seems to work the best. Maybe it depends on your area.
Follow this thread to flash modem for CWM any version.
http://forum.xda-developers.com/showthread.php?t=876391
If you are running Froyo then you will want to stick with CWM2 I think. Speedmod is an easy way to get this. If you want to use a modem file that is not listed on that link you can download any CWM2 zip file and open it and insert your modem.bin into it. Then flash that using CWM.
Hi thank you for your reply.
I dono where to downlaod the JVO modem with CWM2 version
also if i use speedmod will I get CWM2? even tho i have stock e3 recovery installed??/
Yes, speedmod will give you CWM2. Just download speedmod for ODIN and flash it as PDA. It will work on all froyo builds.
http://forum.xda-developers.com/showthread.php?t=822756
To get the modem file just extract the modem.bin out of the CWM3 zip file you have. Then download any CWM2 modem zip file and put that modem.bin into it. The only difference between those files are the modem.bin inside them.
I wish I knew a way to flash just the modem.bin with ODIN. There may be a way, but I have not found it yet. CWM is the only documented way that I have found unless the ROM comes in 3 parts. Then you can just flash the PHONE portion with Odin.
One other trick I did was I flashed with a ROM that included the modem that I wanted, then used Odin to upgrade to JVH but didn't flash the Phone portion, just the PDA and CSC. This worked good and didn't require CWM or rooting at all. Now I have a 2.3.3 stock ROM with a custom Modem without any hacks.
-start Odin.
-Select "phone" and fetch the modem.bin file.
-Only thing checked should be "Auto Reboot"
-Put phone in download mode
-Plug in USB
-hit Start
Awesome, Thanks Pr3torian. I have thought about doing that a few times but wasn't sure it would work. I always figured it was that easy but could not find any documentation to support it. All the Phone downloads are always md5 or zip format so didn't want to brick my phone.

[Q] How to install JVR modem on cyanogen?

Hi,
I am on the latest cyanogen mod for Galaxy S I9000. I wanted to install XXJVR modem on it. Using ODIN, I flashed JVR modem on it. Now, i cannot connect to the mobile network, baseband is unknown.
What is the procedure of flashing JVR modem on cyanogen?
harshaxp said:
Hi,
I am on the latest cyanogen mod for Galaxy S I9000. I wanted to install XXJVR modem on it. Using ODIN, I flashed JVR modem on it. Now, i cannot connect to the mobile network, baseband is unknown.
What is the procedure of flashing JVR modem on cyanogen?
Click to expand...
Click to collapse
LOL, You are a winner. FAIL OF THE YEAR.
Ok, Answer is > http://forum.xda-developers.com/showthread.php?t=1158783 find there a JVR modem, and flash it via Recovery
Thanks for the quick reply. I am trying it now and update once done.
Dfolt,
Thanks a tonn. Things are working fine now. I did not realize the fact that I must not use ODIN for flashing the modem for cyanogen and another mistake I did was that I took the modem from stock XXJVR.
and, 1 thing, dont flash modems (if u are using cyanogenmod) via Odin .
Modems for CM7 are flashable only via Recovery
Hi,
here you find a lot of modems and bootloader for cm7-->
http://forum.xda-developers.com/showthread.php?t=1158783
MfG

I9000 rom on i9001

Moin
I Have a easy Question....
Is it possible to flash an i9000 rom on the i9001
because i want flash darknight 2.1 rom with android 4.0.4
thank a lot for answers
Lump800
Do not do such things! ! ! Your phone may already be obsolete. I9000 and i9001 is a very different phones! ! !
Wysłane z mojego GT-I9001
Thank you kept me in front of a large error.
I had almost a door-stopper beautiful.
translated by google translator
sorry for that my english in not the best
Noo nooo and noooooooo. this is the fastest ticket to a broken phone
don't even think about it
is it possible to flash i9001 file to i9001 after i9000 firmware
it possible to flash i9001 file to i9001 after i9000 firmware. i had accidently flashed i9000 firmware on i9001 . now i want to flash it back to orginal firmware . is there anyway to rescue it
thanks a lot
darkeye said:
it possible to flash i9001 file to i9001 after i9000 firmware. i had accidently flashed i9000 firmware on i9001 . now i want to flash it back to orginal firmware . is there anyway to rescue it
thanks a lot
Click to expand...
Click to collapse
should be possible, you need to find the oldest possible stock rom and try flashing it with AiresVE.ops , MultiLoader Odin v.4.43
This happened to me, someone flashed cm for i9000 on i9001 and it worked for a while but it progressively started crashing, i took that phone and tried flashing stock but never could get pass setup connection in odin 4.43, tried all the variations (driver reinstall, new cable, remove battery, other PC etc) and in a hail marry attempt i managed to flash i9000 stock witch odin 1.83. Phone now works, enters download and recovery mode, but i still cant get past same error in odin 4.43 or flash custom recovery i any way (verification error from update method, adb flash just doesnt stick). ROM manager sees some custom recoveries but i cant enter them, my guess is because of different pit file from i9000.
Havent tried flashing i9001 rom with odin 1.83 because i cant use ariesve.obs from 4.43, i managed to connect to phone with heimdall and download pit, so that kind of connection works. My guess is that if i could somehow create pit file for this phone that works with heimdal i could flash proper stock rom, so im here to ask is it possible and how would i do it ?

[Q] How to flash JW4 coming from cm9 slim?

hello, i need urgently an answer, when i try to flash with odin, it say me "FAIL!", i used pit512 and put jw4.tar in PDA,
EDIT: i'm trying again and it works, i don't know why.
I flash a firmware with 3 files ( CSC, PDA, MODEM) then JW4. Flashing JW4 only will soft brick my phone.

Categories

Resources