Getting started (suggestions) - Captivate Q&A, Help & Troubleshooting

I would like to start with a new ROM on my captivate but i think i need to learn more about what the basics are aside from youtube tutorials does anyone have any suggestions on how to get started, what to read, ROMs,ect.. I am already rooted with titanium on and now i would like to get into some good ROMs
Sent from my SAMSUNG-SGH-I897 using XDA App

Buy the pro version of titanium backup. It'll save you a lot of time. Make sure you know the difference between Samsung's Advanced Recovery Mode and Clockwork Mod Recovery. DO NOT FLASH ROMS USING ROM MANAGER.
Read, read, and read.
Sent from my GT-I9000 using XDA App

Start with flashing froyo based roms. Most of them are really simple and safe to flash. Learn about clockwork mod since almost all froyo roms use that to flash.
Like in order to flash cognition just drop it into your internal sd, boot into clockwork mod recovery mode and install it from the sd card. It's that easy. Just be careful when trying a gingerbread based rom because then you need to worry about boot loaders and stuff.
Sent from my Samsung Captivate running Cognition 2.2 rom

capocaccia said:
Start with flashing froyo based roms. Most of them are really simple and safe to flash. Learn about clockwork mod since almost all froyo roms use that to flash.
Like in order to flash cognition just drop it into your internal sd, boot into clockwork mod recovery mode and install it from the sd card. It's that easy. Just be careful when trying a gingerbread based rom because then you need to worry about boot loaders and stuff.
Sent from my Samsung Captivate running Cognition 2.2 rom
Click to expand...
Click to collapse
even GB roms use CWM

Ya I know they do but they aren't as simple to flash as the froyo roms.
But the op needs to read the sticky at the top of the development section on how to flash roms. But be aware the guide is for froyo (2.2) based roms only.
Here is the How to Flash Captivate 2.2 Based Roms thread. Read it carefully and you will have no issues at all flashing any 2.2 based rom. http://forum.xda-developers.com/showthread.php?t=884364
Sent from my Samsung Captivate running Cognition 2.2 rom

Thanks guys i have been reading and reading and reading again i was set to try out fasty but now it went to rom manager premium so i will purchase it. Any recommendations maybe cognition something for froyo?? MJ
Sent from my SAMSUNG-SGH-I897 using XDA App

cognition 4.5.3 would be good to start off with,make sure you read and follow the exact steps before flashing the rom,pm me if you need help

Also having a Jig around is always a good idea just in case you key combos decide to not work in a bootloop or fail firmware flash. You never know.

Related

[Q] Odin one-click softbricks my phone

I'm having a bit of trouble with Odin one-click. Last night I decided to upgrade from Perception 10.4 (Froyo based) to Perception 2b3 (Gingerbread based). I plugged it in, put it into download mode, and activated Odin. It ran just fine, but at the end, my phone rebooted into a boot loop. I ended up putting together a jig to get it back into download mode, and tried again. Same thing happened. I eventually ended up using a Froyo Odin to qwerty least get it working again. Does anyone have any ideas as to why Gingerbread Odin soft bricks my phone, and what I should do to fix it? Let me know if you need any more details. Thanks in advance.
I know this would do better in the odin thread, but I don't have enough posts to post there, mending the fact that I've been lurking around for close to a year
Guess I'll just keep posting here until a) someone responds or b) I have enough posts to ask in the proper thread
I'd ready like to be able to get my cappy running Gingerbread tonight. Anyone have any ideas?
What one click are you taking about? Is it this one?
http://forum.xda-developers.com/showthread.php?t=731989
If it is, this will take you to stock eclair. Not sure what ur talking about with one click froyo. There is a one click GB from Design Gears in the development section. It flashes the newest release of GB stock. If you can get into dl mode you can flash either of the one click odins, but read about both before you do. Bootloaders are involved, and if you don't know about them they can be trouble. Read in development section.
This is a link to one click for GB stock. CONTAINS BOOTLOADERS.
http://forum.xda-developers.com/showthread.php?t=1127249
Sent from my SAMSUNG-SGH-I897 using XDA App
Sorry, for some reason can't get that second link to work properly. Doing this from my phone. Just type in the url. If you decide to flash this GB oneclick, you'll be on the kf1 "official" release. Check dev section and you can flash beta cognition if you want. People are having great results with this rom, including myself. Good luck.
Sent from my SAMSUNG-SGH-I897 using XDA App
I recommend flashing the KF1 odin one-click. I just flashed that one, and it worked like a champ. Its in the Continuum v6 thread at http://forum.xda-developers.com/showthread.php?t=1136128. If you read the instructions it will work flawlessly. The only odin problems I've ran into have been user induced.
Okay, I'll try out that KF1. All I really need it for is to get the bootloaders so I can install other 2.3 roms. Will this work for that?
The Froyo Odin I was tackling about was just an older version, I think.
Edit: Why is it so much more difficult to go from 2.2 to 2.3 than it was going from 2.1 to 2.2? Upgrading to 2.2, I just had to use CWM to flash the new rom onto the phone.
Okay, I was trying to follow the instructions in the Continuum thread, and it looks like I am supposed to go back to Eclair before flashing Continuum. I was using this one-click Odin, and it was causing my phone to softbrick. No idea why. Will I be able to use that KF1 Odin to get to Gingerbread, then flash other GB based roms?
And by the trouble caused by bootloaders, you just mean how it will hardbrick if it loses connection in the middle of flashing, right? Or is there more. I've been switching out roms on phones for a while now, but it hasn't been this complex before...
If you mix bootloaders, you will hard brick ur phone. 2.1/2.2 roms have the same bootloaders. GB boots are different. That's why there is more involved to flash GB roms. Basically all the GB roms are I9000 based roms. The kf1 is an i897 based stock rom. If you flash kf1 stock rom, you will lose cwm. You can try cog beta 2 rom if you would like. After following steps to flash GB bootloaders with link mentioned above, check dev section. There are currently 2 kf1 custom roms. I use the cog beta 2, and it works great. people have mentioned that they have flashed i9000 roms over kf1, but I personally haven't, cuz so far cog beta is working great and the call quality is outstanding compared to any of the i9000 roms. Read read read read, before taking any steps. You don't want to ruin it phone! If you want to flash i9000 based GB, read this:
http://forum.xda-developers.com/showthread.php?t=1045734
Btw, what build is ur phone? (4 digit number under battery). Some builds, especially 1010 have trouble with oneclick.
Sent from my SAMSUNG-SGH-I897 using XDA App
So it sounds like what I need to do is use that KF1 Odin, then I can flash other roms over that? How can I tell which custom roms are KF1? Is Perception KF1 based? What would you recommend I read to make sure I'm doing it right? Are there specific threads that are especially helpful for this? Thanks for all of the help, I'd really like to learn how to do this.
It'll say in the title. Liked I said, currently there are only two kf1 based roms. Cog beta and another one that I can't remember the name of. If it says something in the title besides kf1/or i897, it's for i9000. Ex/ jvh, jvo, jvp are all i9000 based.
Sent from my SAMSUNG-SGH-I897 using XDA App
What do I need to do if I want to use a non-KF1 based GB rom? I've been very happy with Perception, and I'd like to keep using it.
If you want to flash GB stock that is based off of I9000 read and follow this, step by step:
http://forum.xda-developers.com/showthread.php?t=1045734
After you do this you can flash GB roms via cwm.
If you want to flash GB with kf1, you can, and people have been running I9000 based custom roms on the same bootloaders. JUST MAKE SURE YOU CHECK ANY ROM YOU'RE FLASHING TO SEE IF IT INCLUDES BOOTLOADERS. I personally haven't run any I9000 roms after flashing kf1, but I believe if you want to do this, (NOT POSITIVE ABOUT THIS, SO YOU MIGHT WANT TO RESEARCH THIS FIRST) you would have to flash an appropriate I9000 kernel using odin (not oneclick, but the full version). Put the kernel in the PDA slot, uncheck repartition, and auto reboot and flash. That way you will get cwm 2 or3 back which will enable you to flash the rom you want. (Remember, with stock KF1 you lose cwm). After kernel flashes, boot ONLY into recovery, and flash rom that you put on your SD card before doing any of this, and flash via cwm. AGAIN, NOT POSITIVE THIS IS WHAT YOU DO, SO RESEARCH.
That makes a lot more sense than the instructions I was trying to follow. I'll try that in a bit.
It worked! Thanks for all of your help
What did you end up doing? GB I9000 stock, or kf1 then flash I9000 custom rom over it?
Sent from my SAMSUNG-SGH-I897 using XDA App
I used the I9000 GB stock rom from that link you posted, then flashed a custom rom over it. I ended up using Perception 2 beta.
Glad it worked for you.
Sent from my SAMSUNG-SGH-I897 using XDA App

[Q] COMPLETELY NEW TO THIS STUFF!!!(Galaxy S)

Helllo there,
i recently installe Stock 2.3.4 XXJVQ having only used odin for the first time, however i like the idea of having a new ROM on my phone whenever i like, firstly...
My galaxy s has no custom rom, cm7, custom kernel or anything like that, it is completely stock, what is the safest and quickest way to root 2.3.4 jvq and start installing custom ROMS.
Also i know that if i (somehow) manage to brick my phone i can just install XXJVQ stock again, but ive seen various threads which say they have just installed a new rom and bricked their device and now they cant get into recovery or download mode, how does this happen and is this common?
Thanks.....
GalaxySN00B:0 said:
Helllo there,
i recently installe Stock 2.3.4 XXJVQ having only used odin for the first time, however i like the idea of having a new ROM on my phone whenever i like, firstly...
My galaxy s has no custom rom, cm7, custom kernel or anything like that, it is completely stock, what is the safest and quickest way to root 2.3.4 jvq and start installing custom ROMS.
Also i know that if i (somehow) manage to brick my phone i can just install XXJVQ stock again, but ive seen various threads which say they have just installed a new rom and bricked their device and now they cant get into recovery or download mode, how does this happen and is this common?
Thanks.....
Click to expand...
Click to collapse
read all the FAQ`s, and forum rules for a start point, this will give you the confidence to proceed, if you follow instructions from whatever thread you chose to use then generally you wont have any problems, the sgs is very hard to kill, but it is a learning process so do the learning and start simple with maybe just a kernel flash and all should be good, it takes time to learn so dont rush anything
Thanks, also what are GB bootloaders? And If I'm currently on jvq can I flash cm7 recovery onto my phone without changing any of the kernels? I'm on gingerbread so will I still have froyo bootloaders?
Sent from my GT-I9000 using XDA App
GalaxySN00B:0 said:
Thanks, also what are GB bootloaders? And If I'm currently on jvq can I flash cm7 recovery onto my phone without changing any of the kernels? I'm on gingerbread so will I still have froyo bootloaders?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
cm7 recovery? there is a rom cm7 based on aosp, or there is clockwork mod recovery...a custom recovery....
if you are on gingerbread you have gingerbread bootloaders....
.....back to the study...you are not ready to start flashing yet
Yeah that's what I meant clockwork mod recovery
Sent from my GT-I9000 using XDA App
LOL as the name onliest, I'm new to this stuff
Sent from my GT-I9000 using XDA App
If you flash a kernel then you will gain root and recovery, keep reading, I'm trying to save you from a sticky situation! It is worth the endeavor
Sent from my GT-I9000 using XDA Premium App

[Q] Need help to clear some questions

Hi guys, I'm new here and have been scouring the forums on how to do things but I keep getting caught with uncertainties.
I have an i896 Samsung Galaxy S Captivate with a Rogers 2.3.3 Gingerbread installed.
I have rooted it with no issues and its also unlocked.
What I want to do:
1. CyanogenMod 7
2. Overclock the CPU
But what I don't know is...
1. Since i'm running a Rogers ROM, do I have to flash to an AT&T ROM then to any custom ROM?
2. I read the instructions on how to update to the CM7 ROM but every instruction I read says I must have Froyo/Eclair to goto CM7. So do I downgrade and if so, how can I do that? I tried and what ends up happening is the phone's reception bars have an X and data doesn't work either. In the phone About properties, states that the baseband is "unknown". I suspect I need something more than a stock Rogers ROM without bootloaders. I couldn't find a 2.1 or 2.2 stock Rogers ROM with bootloders.
3. For overclocking, I installed Voltage Control and Control Freak and neither let me overclock, the max CPU is 1000Mhz. I assume I need a custom Kernal to do this but haven't been able to find how to do this during the CM7 upgrade.
I just need someone to point me in the right direction on what order to do all this and whether me having a Rogers stock 2.3.3 ROM causes an issue. I've done a lot of reading on these forums so its not like I just signed up and wanted to know the easy way out. I simply want the proper way to do things so I don't repeat the same mistakes many people may have done in the past.
I have used Odin, Heimdall, Odin One Click, Super One Click for rooting.
Hopefully someone can guide me in the right direction and help me achieve these goals!
You dont need to go back to Froyo, as GB bootloader is compatible. but you need CWM to flash CM7. you can use Rom Manager app to flash the CWM.
Just download CM7 zip file, wipe data, system and cache and install it using CWM. It comes with custom kernel so you can overclock it using those apps you mentioned. You can also flash Glitch kernel....
See that's what i've been trying to do but when it comes to installing the nightly rom in zip format, it tells me the signature failed.
Do I need to buy the premium version of rom manager or can I get away with the free version? I don't want to use my credit card, i rather wait until paypal is implemented with android market.
This is so frustrating...
BadBoiSinZ said:
See that's what i've been trying to do but when it comes to installing the nightly rom in zip format, it tells me the signature failed.
Do I need to buy the premium version of rom manager or can I get away with the free version? I don't want to use my credit card, i rather wait until paypal is implemented with android market.
This is so frustrating...
Click to expand...
Click to collapse
You need to Odin flash a custom kernel that has CWM in it and then install the zip from CWM. I don't know if all kernels for the i897 are compatable with i896 just have to read. I
Currently Fusionized
Wdustin1 said:
You need to Odin flash a custom kernel that has CWM in it and then install the zip from CWM. I don't know if all kernels for the i897 are compatable with i896 just have to read. I
Currently Fusionized
Click to expand...
Click to collapse
Ya that's what I don't know either...I read tons of threads where people with i896 Rogers roms tried to flash with AT&T based roms or i897 roms and either bricked their phones or made a mess that took much more to get them back to stock...problem is the people that have i896 roms here I can't contact until I hit 10 posts...so I'm here stuck until then...
Just flash a custom I897 kernel with cwm, once complete, yank battery, replace and button combo boot into recovery and flash the ROM. Whichever kernel you choose doesn't really matter as zip will flash a compatible kernel, the I896 and I897 are identical other than cosmetic branding.
I was on stock rogers 2.3.3.
Installed Sumari kernel. Booted into the sumari recovery, installed CM7 zip, the phone rebooted into cwm recovery, and continued installing.
It worked pretty smoothly.
okay so i flashed my phone with a stock 2.3.5 rom with CWM, but how do I update to CM7? When i boot into recovery the only option I have is reinstall package. Do i rename the CM7 zip file to update.zip and that should work? I'm so lost...
In CWM recovery you need to choose install zip from sdcard, make sure you are in fact in cwm recovery
Before you do that....you need to flash a kernel with Odin that has cwm in it...
Woo! that worked like a charm haha yea baby yea!! Thank you soo much!! i was so scared to flash my cappy going from Rogers to AT&T that it would brick the phone. Got CM7 with Glitch Kernel and overclocked to 1.4 sawweeeeet!!
Now time to fiddle around and customize!
Thanks everyone!!

New to captivate, need help

OK, so I ran through all the guides and searched through what feels like a thousand posts. Here's my problem. I want to flash ICSSGS. Every guide I've read says I need to flash back to stock 2.1. I'm currently on the UCKK4 GB update. I used ODIN one click to flash back to 2.1, but couldn't get into download mode using any method (excluding JIG). So I used Kies to upgrade back to UCKK4. I can now get into download mode again. Can I just flash the bootloaders and a custom kernel from GB instead of being on Froyo?
No need to flash the bootloaders, you have the gingerbread ones thanks to kies, they work worth EVERYTHING so you do not need to ever flash bootloaders again.aahs i digest you don't, Cause flashing those is the only tine you cab hard brick.
Flash corn kernel with Odin right now on gingerbread, then boot into recovery factory reset and format /system, and flash the ics ROM twice. Bingo bango you're done.
Thanks. I'm just switching from a Sony X10 so things are a little different here. Every guide said start at 2.1 so I didn't think i could flash from GB. I want to try ICS, but the X10 builds are still alphas.
Sent from my SAMSUNG-SGH-I897 using XDA
Most of the guides on here are getting dated. But for the Captivate, once you have gingerbread bootloaders you can flash pretty much anything from anything. Exceptions would be Cyanogenmod.
capocaccia said:
Most of the guides on here are getting dated. But for the Captivate, once you have gingerbread bootloaders you can flash pretty much anything from anything. Exceptions would be Cyanogenmod.
Click to expand...
Click to collapse
some people have reported that gingerbread bootloaders work with Cyanogenmod
He meant flash from CyanogenMod or any other MTD ROM to BML ROM
Again, thanks for the info. Maybe I'll write an updated guide after I get accustomed to this phone and ODIN. Flashtool for the X10 definitely spoiled me.
jfalgout2003 said:
OK, so I ran through all the guides and searched through what feels like a thousand posts. Here's my problem. I want to flash ICSSGS. Every guide I've read says I need to flash back to stock 2.1. I'm currently on the UCKK4 GB update. I used ODIN one click to flash back to 2.1, but couldn't get into download mode using any method (excluding JIG). So I used Kies to upgrade back to UCKK4. I can now get into download mode again. Can I just flash the bootloaders and a custom kernel from GB instead of being on Froyo?
Click to expand...
Click to collapse
I have successfully flashed about 10 roms while having gb boot loader they include 2-3 version of cm7, two version of miui rom , and many more gb boot loader can run any older or newer rom on captivate no need to downgrade bootloader
I'm a quick learner. I just switched over from a Sony X10 that was running a MIUI rom. My wife bought an iPhone so I took over her phone. I'm still learning the ins and outs of the captivate and how it works. I'm loving this phone. It's capable of so much more than the X10. I'm also loving this ICSSGS rom. It's smooth as butter.
Sent from my SGH-I897 running ICSSGS on Glitch using XDA
imnew
how to change model name for market
to access not supported apps?
inside file build.prob i have changed name but not working

[Q] Flashing from Firefly (froyo) to ICS

Hey all,
I was wondering if any kind, experienced users out there would be willing to help talk me through the flashing process for my specific situation. My cappy is currently rooted, running the last version of the Firefly froyo ROM (released last April). As such, I have clockwork recovery all ready to go. But I am confused by the switch from 2.2 to 4.0, and if there is anything extra I need to do besides Tibu backup, wipe data and cache, and then flash the new ROM using clockwork recovery. Do I need to flash a 2.3 ROM first? Is Tibu going to give me problems? Should I revert to stock first? Odin to update bootloaders? Heimdall? I'm so confused and I can't risk the brick!!
I know this may be a complicated question, so if someone wants to DM me instead, that would be amazing. Essentially, I'm looking for a step-by-step explanation of how to get from Firefly, a 2.2 ROM, to teamhacksung's ICS or another ICS ROM, and retaining my apps and data and with the smallest chance of flashing complications.
Any good samaritans out there? THANK YOU!
GerStud101 said:
Hey all,
I was wondering if any kind, experienced users out there would be willing to help talk me through the flashing process for my specific situation. My cappy is currently rooted, running the last version of the Firefly froyo ROM (released last April). As such, I have clockwork recovery all ready to go. But I am confused by the switch from 2.2 to 4.0, and if there is anything extra I need to do besides Tibu backup, wipe data and cache, and then flash the new ROM using clockwork recovery. Do I need to flash a 2.3 ROM first? Is Tibu going to give me problems? Should I revert to stock first? Odin to update bootloaders? Heimdall? I'm so confused and I can't risk the brick!!
I know this may be a complicated question, so if someone wants to DM me instead, that would be amazing. Essentially, I'm looking for a step-by-step explanation of how to get from Firefly, a 2.2 ROM, to teamhacksung's ICS or another ICS ROM, and retaining my apps and data and with the smallest chance of flashing complications.
Any good samaritans out there? THANK YOU!
Click to expand...
Click to collapse
Alright you always need gingerbread boot loaders, then you can install a kernel with cwm and then just flash the rom, when I get home I can explain to more detail, hard to type it all out on my phone.
Sent from my SGH-I897 using XDA
patrick8996 said:
Alright you always need gingerbread boot loaders, then you can install a kernel with cwm and then just flash the rom, when I get home I can explain to more detail, hard to type it all out on my phone.
Sent from my SGH-I897 using XDA
Click to expand...
Click to collapse
I can't say you NEED gingerbread bootloaders, but they are highly recommended since once you flash them, there is never a need to flash them again, and certain ICS roms and kernels may require them. The easiest way to get them is to grab an Odin/heimdall gingerbread one-click with bootloaders; find in the dev section. You currently have ClockworkMod recovery, so you should be able to flash the zips from there. Since you are on a non-CM ROM, you will probably have to flash it twice.
Sent from my CM9 ICS i897 Captivate

Categories

Resources