download link is http://u.115.com/file/e6kuwn2c
use tenfar's recovery to flash it.
then click on "电信下载" to start downloading
Tested on my ATT atrix(already flashed chinese retail version)
Does this work on AT&T Atrix?
Any advantages on this version? Signal improved? Faster connection? More Stable?
Hehe, the first post! "tested on my AT&T Atrix"
...
"Does this work on AT&T Atrix?"
its a good question
While this thread is still on the first page, I would just like say, use RomRacers CWM to flash... need to start getting away from Tenfars version, as it's starting to cause more problems than it's worth.
Sent from my MB860 using xda premium
do not flash on international atrix. no gsm signal.
not working here on ATT Atrix. No baseband after update, no signal. I was on CM7 Pre Beta 3. Flashed via Recovery (Koush Official)
No go on Aura rom. Had to reflash att radio.
MB860 - ROM junkie
no go for me too. stock rom italian h3g carrier
Related
I have been looking for an answer to this and if it has been answered before, point me to the thread.
I'm using a Telus Milestone here in the US with ATT. I have GOT OR 2.01 loaded on my milestone and it's rooted in everything. Now the next step would be to pick a firmware for 2.2.1. However, There is nothing listed for ATT or US at all for that matter.
Should I use Telus's Firmware? And will it still work with ATT? I want to load some custom roms, but I'm a bit stuck. Thanks for any input.
You should use Telus firmware. Or any firmware you like, but flash Telus baseband on top in order to get it working on AT&T
Check in milestone Android development thread, there are few choices available (roms), pick one. There is still no official Froyo rom for Milestone though. Most of the custom roms available are nearly fully functional.
Sent from my DROID2 GLOBAL
Thank you very much. I wanted to try it, but I didn't want to guess, be wrong, and be screwed. Thats all I needed!
So I flashed my ME863 to a brazilian retail XT860 rom in order to install CM9 in safestrap. However I lost my connection, no gsm. I discovered too that when I choose a radio mode in the menus, it auto selects the next one instead of the one I chose (not sure how to explain, maybe a bug?). I tried to flash willis11's old data patch aswell, but then the phone would get stuck at the CM9 bootup screen. Any suggestions?
Is it possible the "old" Willis patch you used was made for gingerbread (not ics)?
Sent from my HTC Raider
LaZiODROID said:
Is it possible the "old" Willis patch you used was made for gingerbread (not ics)?
Sent from my HTC Raider
Click to expand...
Click to collapse
Tried it with the 'new' patch too. Same result. Thought the kexec cm9 had gsm umts native support?
Is the new one you tried the one from here http://dl.hash-of-codes.com/ROMs/solana/cm9/ ?
Sent from my DROID BIONIC using Tapatalk 2
linuxgator said:
Is the new one you tried the one from here
Sent from my DROID BIONIC using Tapatalk 2
Click to expand...
Click to collapse
No it wasn't! It was from an old thread I found. Will try to flash it tomorrow. I will report back!
Edit: got radio working, max of 2 radio bars though. I think it's just visual bug?
Steamed_Egg said:
No it wasn't! It was from an old thread I found. Will try to flash it tomorrow. I will report back!
Edit: got radio working, max of 2 radio bars though. I think it's just visual bug?
Click to expand...
Click to collapse
Your ME863, is it from Asia region like Hong Kong or Taiwan??
Is the signal greatly improved after flashing to Brazilian Rom?
I have an ME863 from Hong Kong and signal strength is very disappointing. Afraid to flash it to Brazilian Rom and bricking it.
Hope you can enlight me pls. Thanks
The two bars thing is a bug indeed.
So I flashed my AT&T Note i717 to the T-Mobile boot.img. I think it was "t-mob-stock-boot.img.tar". So now my phone thinks it's the T-Mobile Note version. When I go into about phone, the model number even says SGH-T879.
Will this cause any future problems if I want to flash to an AT&T based ROMs? Will it have any problems if I flash T-Mobile based ROMs? When I flash the radio modems...will only T-mobile radios work or will AT&T radio works as well? I'm just trying to clarify everything before I do something stupid and mess up my phone. Thanks in advance.
This belongs in the Q and A section. As far as your inquiry
So correct me if IM wrong but from mg understanding.............
1. TMobile boot.img
So this is needed to flash any TMobile ROM the reason for this is that it makes the association to the ROM. No boot.img will cause the ROM to not boot up. So TMobile boot.img must be used for any TMobile or att roms if you are using a TMobile note. and att boot.img must be used for any tmkbile or att roms on an att variant of the phone.
2. The radio basically tells the phone what network it's connecting to. So if you flash a TMobile ROM there is a big chance you are also flashing a TMobile radio. If you are trying to use an att galaxy note with TMobile you have to find the appropriate radio in that Dec section. If you are trying to use the TMobile ROM on att network you must flash an att radio.
Sent from my SAMSUNG-SGH-I717 using xda premium
illest_one_7777 said:
This belongs in the Q and A section. As far as your inquiry
So correct me if IM wrong but from mg understanding.............
1. TMobile boot.img
So this is needed to flash any TMobile ROM the reason for this is that it makes the association to the ROM. No boot.img will cause the ROM to not boot up. So TMobile boot.img must be used for any TMobile or att roms if you are using a TMobile note. and att boot.img must be used for any tmkbile or att roms on an att variant of the phone.
2. The radio basically tells the phone what network it's connecting to. So if you flash a TMobile ROM there is a big chance you are also flashing a TMobile radio. If you are trying to use an att galaxy note with TMobile you have to find the appropriate radio in that Dec section. If you are trying to use the TMobile ROM on att network you must flash an att radio.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Got it! Thanks. I have an AT&T note that I'm using on T-mobile...so for future references, there shouldn't be any interference if I decide to flash to an AT&T ROM if I flash it back with At&t's stock.img, correct? So just to double check, I can only flash to a t-mobile radio only if I'm running a T-mobile ROM? What are the side effects if I tried to flash to a T-mobile radio on a stock at&t ROM?
That's about right. I don't think you can brick the device by flashing an improper radio, but don't hold me to it. I have done the opposite I have a TMobile note and have flashed TMobile radio with att roms with various success. In some occasions the ROM boots and the signal varies. It's best if you stick with att roms with att radios as opposed to TMobile roms with att radios. Results will vary by rom
Sent from my SAMSUNG-SGH-I717 using xda premium
Thank you so much!
Sent from my SGH-T879 using xda app-developers app
http://www.blownco.com/JamieD81/cm-test/cm-10.1-20130215-UNOFFICIAL-quincyatt.zip
Room
http://goo.im/gapps/gapps-jb-20121212-signed.zip
Gapp
Is recommend that you always do a full wipe and nandroid back up
This the treat in the att forum. http://forum.xda-developers.com/showthread.php?t=2141236
How are we supposed to flash this if this is quincyatt?
From what I understand they are cross compatible. I flashed the T-Mo stock rom onto my unlocked At&t Note since I use T-Mobile for my service which allows wifi calling.
Sent from my HuGe Note while tucking your mom in bed!
mahgninnuc93 said:
From what I understand they are cross compatible. I flashed the T-Mo stock rom onto my unlocked At&t Note since I use T-Mobile for my service which allows wifi calling.
Sent from my HuGe Note while tucking your mom in bed!
Click to expand...
Click to collapse
1st post after years of lurking:
My i717 is an unlocked ATT and rooted - to run on Tmo. I wonder if the rom (bloated as it may be comparred to the ROM I'm using) will install well on my 1+yr old ATT model. I suppose only one way to tell. (crossing fingers).
Anyone tried to see if nfc beam works by default on this updated / stock rom?
.
hillg001 said:
1st post after years of lurking:
My i717 is an unlocked ATT and rooted - to run on Tmo. I wonder if the rom (bloated as it may be comparred to the ROM I'm using) will install well on my 1+yr old ATT model. I suppose only one way to tell. (crossing fingers).
Anyone tried to see if nfc beam works by default on this updated / stock rom?
.
Click to expand...
Click to collapse
It will work on either unit. I currently am using an unlocked and rooted I717 and have run successfully both T-MO and AT&T ROM's.
I just need to get one that's not stock T-Mo to get the Wifi Calling working because I need it for my new place where I get NO reception LOL.
I'm a t-mobile htc one user. T-mobile USA use special channel for their 4G net work, which is 1700/2100 HZ. Will I lose my 4g connection if I flash a custom-rom or kernel?
chiho0516 said:
I'm a t-mobile htc one user. T-mobile USA use special channel for their 4G net work, which is 1700/2100 HZ. Will I lose my 4g connection if I flash a custom-rom or kernel?
Click to expand...
Click to collapse
no. im with tmo and currently using trickdroid and bulletproof still getting 4g and 4g lte
4g LTE? I have 4g only
Is that a 4.1 based rom or is it a 4.2 base?
Does the software number matter? Because we are using 1.27.531.7, which is different than most using 1.29
chiho0516 said:
4g LTE? I have 4g only
Is that a 4.1 based rom or is it a 4.2 base?
Does the software number matter? Because we are using 1.27.531.7, which is different than most using 1.29
Click to expand...
Click to collapse
my tmo htc one came with 1.29 and im running a custom sence based rom that is 1.29 which is 4.1.2
chiho0516 said:
4g LTE? I have 4g only
Is that a 4.1 based rom or is it a 4.2 base?
Does the software number matter? Because we are using 1.27.531.7, which is different than most using 1.29
Click to expand...
Click to collapse
The HTC One and tmobile support 4glte. Just in certain available areas. Tmobike is rolling out 4glte lil by lil to every city.
Sent from my HTC myTouch 4g using xda premium
skinsfanbdh said:
my tmo htc one came with 1.29 and im running a custom sence based rom that is 1.29 which is 4.1.2
Click to expand...
Click to collapse
Tmobile USA HTC Ones have different firmware? Can I update my firmware?
My firmware is 1.27. Is that mean I can't use those custom roms which are based on 1.29? Because if I flash for 1.29, I can't go back to 1.27, which means I can't get official update.
I got mine on Thursday, I called TMo in the morning and they where sold out so I left my number for their next shippment. Which came in 3 hours later, so I know it's as fresh as the come and mine is 1.27 also. This is the first I've heard of someone with a T-Mobile One from T-Mobile that came with 1.29.
chiho0516 said:
Tmobile USA HTC Ones have different firmware? Can I update my firmware?
My firmware is 1.27. Is that mean I can't use those custom roms which are based on 1.29? Because if I flash for 1.29, I can't go back to 1.27, which means I can't get official update.
Click to expand...
Click to collapse
just make a backup of your stock rom and you can go back to it whenever you want. yes you can flash custom roms based off the 1.29 update
yes im with tmo usa
skinsfanbdh said:
just make a backup of your stock rom and you can go back to it whenever you want. yes you can flash custom roms based off the 1.29 update
yes im with tmo usa
Click to expand...
Click to collapse
How to back up and how to go back? I'm sorry for asking this stupid question but I really don't know how. I turn "back up" on on my phone, is it already back up? I don't see any back up bottom on htc sync manager. And how to go back? I can't find tmobile stock rom anywhere.
chiho0516 said:
How to back up and how to go back? I'm sorry for asking this stupid question but I really don't know how. I turn "back up" on on my phone, is it already back up? I don't see any back up bottom on htc sync manager. And how to go back? I can't find tmobile stock rom anywhere.
Click to expand...
Click to collapse
you have to unlock bootloader and install custom recovery. you make the backup in the custom recovery. there will be an option in the recovery that says backup/restore. use that to make backups or restore your backup
This should answer some of your questions about backing up an Android device. We assume that since you are talking about adding a custom rom/kernel, you know you have to have a custom recovery to install them. Here is a video of a custom recovery you can use to not only install a rom/kernel, but also back up your current stock rom/kernel.
http://www.youtube.com/watch?v=laBKgRCpMeI
skinsfanbdh said:
you have to unlock bootloader and install custom recovery. you make the backup in the custom recovery. there will be an option in the recovery that says backup/restore. use that to make backups or restore your backup
Click to expand...
Click to collapse
If I flash a kernel, am I still able to go back to the stock kernel? How can I do that?
stevessvt said:
This should answer some of your questions about backing up an Android device. We assume that since you are talking about adding a custom rom/kernel, you know you have to have a custom recovery to install them. Here is a video of a custom recovery you can use to not only install a rom/kernel, but also back up your current stock rom/kernel.
http://www.youtube.com/watch?v=laBKgRCpMeI
Click to expand...
Click to collapse
I got that already, thank you
chiho0516 said:
Tmobile USA HTC Ones have different firmware? Can I update my firmware?
My firmware is 1.27. Is that mean I can't use those custom roms which are based on 1.29? Because if I flash for 1.29, I can't go back to 1.27, which means I can't get official update.
Click to expand...
Click to collapse
My T-Mobile h1 is also on 1.27, don't think I've heard of anyone with a T-Mobile 1.29.
Sent from my Nexus 7 using Tapatalk 2