Has anyone noticed an issue when connecting a USB, Headphone or HDMI cable to the D3, where the touch screen doesn't respond properly?
I had the same issue with the DX when I upgraded it to Gingerbread and the DX2. When plugging in a cable (even brand new cables), the touch screen doesnt want to respond. To use the touch screen, I have to unplug it first.
Since this is the 4th phone I have had this issue and it "seems" to have started with my DX when upgrading to Gingerbread, I wonder if it is a Gingerbread issue?
So no one else has noticed this issue? It is really irritating. I had the same issue with the DX/DX2 desktop dock. I had the dock replaced with the D3 desktop dock and have the same issue!
As soon as I dock, the screen doesnt want to respond correctly to touch. The car dock seems to work fine though.
I'm having the same problem and it was there pre and post root. When I am in HDMI mode, the screen is very laggy and sometimes completely unresponsive. If I unplug the HDMI the issue immediately resolves.
i've seen this sometimes, thought it might be the angle im holding it when the USB cable is plugged in.
Doesn't always happen tho and the dock works fine for me currently.
-smc
I have the issue with every charger except my car chargers... I also notice the problem if I plug into the headphone jack or HDMI port.
With the Droid X and X2, I had a similar issue (3 different phones) but with the Droid 3, I notice that not only does it not want to respond but it responds as if I touched somewhere else... It even responds as if I touched the screen when I am not even near the phone...
I took it in to Verizon and surprising enough, I was told it was normal!!!! Augh...
I do not have this issue. Just tried headphones, wall charger, and USB to my laptop and the screen was just as responsive as when the phone is unplugged. If you can narrow down a pattern I will gladly test more situations.
I noticed this when I was plugged into a brookstone international adapter that has a usb charger. Plugged into an old BB charger or my stock and it worked fine.
Actually I was in a bed and breakfast and my phone started to work on its own. Like it was haunted!!! Really crazy. I was able to repeat it everytime I connected this charger.
bishop0114 said:
I have the issue with every charger except my car chargers... I also notice the problem if I plug into the headphone jack or HDMI port.
With the Droid X and X2, I had a similar issue (3 different phones) but with the Droid 3, I notice that not only does it not want to respond but it responds as if I touched somewhere else... It even responds as if I touched the screen when I am not even near the phone...
I took it in to Verizon and surprising enough, I was told it was normal!!!! Augh...
Click to expand...
Click to collapse
Have you tried a different setups then the ones you use? Like at a buddies or neighbor? If the issue following you around it could be a sign. As a former poster said with the charger cables the touchscreen goes crazy. I had a cheap charger that froze/slowed up my screen. I think it may be a grounding/noise issue (from a laymen not an EE).
HDMI
I've had issues with the HDMI cable plugged in. The video doesn't seem to be a problem, but the sound is very choppy on my HDTV. This was the case with both my wife's and my D3. I wonder if it is a setting on the phone or my 42" JVC TV is a POS.
I just had my D3 replaced due to an issue with the GPS. The replacement has the same issue. As soon as I plug it into any charger, the touch screen starts acting flaky.
When I plug it into my desktop dock (with or without power), the screen starts acting as if I had been pressing it and selects random things on the screen.
I have found that if I push a USB plug tight into the charging socket on the phone, the screen works fine.
Is it possible that Android 2.3 uses the extra pins in the USB and HDMI cables? If so, can this be disabled?
Use the cable and charger that came with your phone, if you're still having problems after that then you have an actual problem.
Hi,
I also have this issue sometimes when I charge the phone (original US charger with EU adapter). The screen responds slowly.
Related
Okay, I'm stumped. I'm already getting a replacement device from HTC under warranty so my problem is solved, but like many of you, I HATE NOT HAVING AN EXPLANATION FOR THINGS!
I'm also wondering if anyone else has had this problem? About 10-Days ago my Kaiser (Tilt) stopped charging via the automotive charger. The A-C charger works fine, but the vehicle charger sent to me with my device from AT&T completely stopped charging my device. I went to the AT&T store & bought a new charger, It didn't work. I changed power points, & cigarette lighter in the vehicle &, it wouldn't work. I tried the charger in the vehicle of two different AT&T sales guys & also tried multiple chargers, & it wouldn't work. Is there any reason why the unit would lose it's ability to charge via a vehicle charger while still retaining it's ability to charge through USB to computer & through the A/C home charger? It seems to me that if the charge portion of the MB was fried, then all charging would be affected.
So how can my device charge fine through all means EXCEPT the vehicle charger?
Again, AT&T is sending me a new device, but I hate not having an explanation for the problem, drives me Nucking Futs!!!
Any ideas, anyone?
Thx!
I dont want to sound rude but have you checked your power settings?
Under the "Advanced" it has a option for "When device is turned on, do not charge the battery when connected to the PC."
If this is ticked it will not charge via the in car charger.
It's a known issue, not just with the Tilt
I had the same problem with my Axim X50 and X51v.
The original sync/charge cable wouldn't charge from the car's lighter, while non-branded cables did so without any problems at all.
This happened with other Axims as well, so I know that it wasn't a defective unit.
I then purchased an HP Ipaq HW6910, and encountered the same issue with my wife's Mazda 5 - the HW6910 woudn't charge if the cable was connected to the charger, when I started the car. It only worked if the adapter and cable were disconnected while staring the car. This did not happen with my Mazda 3 or my Mitsubishi.
And another thing I discovered, is that some cables are not designed for use with car chargers, but they work perfectly with AC chargers.
I bought a couple of retracting sync/charge cables for my HW6910, they worked only when connected to the mains. But regular cables worked perfectly with both power sources.
Jygar said:
I dont want to sound rude but have you checked your power settings?
Under the "Advanced" it has a option for "When device is turned on, do not charge the battery when connected to the PC."
If this is ticked it will not charge via the in car charger.
Click to expand...
Click to collapse
OF COURSE I DID.
Yeah, It charges fine from the PC, & from an A/C source. But the HTC TYTNII car charger that came with my device, as well as replacement car chargers don't work.
wisniak said:
I had the same problem with my Axim X50 and X51v.
The original sync/charge cable wouldn't charge from the car's lighter, while non-branded cables did so without any problems at all.
This happened with other Axims as well, so I know that it wasn't a defective unit.
I then purchased an HP Ipaq HW6910, and encountered the same issue with my wife's Mazda 5 - the HW6910 woudn't charge if the cable was connected to the charger, when I started the car. It only worked if the adapter and cable were disconnected while staring the car. This did not happen with my Mazda 3 or my Mitsubishi.
And another thing I discovered, is that some cables are not designed for use with car chargers, but they work perfectly with AC chargers.
I bought a couple of retracting sync/charge cables for my HW6910, they worked only when connected to the mains. But regular cables worked perfectly with both power sources.
Click to expand...
Click to collapse
Funny, I just ran out to the truck & grabbed one of the guys Blackberry chargers & it looked like it was working. But SK Tools reports an even bigger (negative) amp draw (like discharging twice the normal rate). So with the BB charger it dischages even faster. Maybe reversed polarity Guess I should've checked first. That's a moot point now though as I await my new unit. Weird though.
Well i was using a BB charger that worked fine up until this morning. i bought my phone when it first came out so it wasnt easy to find a charger made for it at the time. i never had a problem until today. i also noticed that the Usb terminal on my device was bent. i called htc but they charge way too much to fix it. i have no idea how or when the terminal broke but it does still charge when pluged into pc or into the wall. ill have to spend $80 to have ppctechs fix it.
wassup, i`m in SF Cali, I had a att 8525 that was doing the same thing. I assumed it was the phone when it 1st started happening. After a week or so it was bothering me so i started playing with it trying to figure out if it was a setting, bad flash, or hardware. I noticed that if the phone was off it wood charge but not if it was on. I started flashing my phone and testing (for trouble shooting purposes) and for the first 2 or 3 roms problem still existed, then one of the roms i flashed to would turn on the back light as if it was charging but no LED or charge, when this started happening I realized that if i turned my fone off it wood start charging and continue to charge when i booted the fone back up. So if when i got in the car i pluged in/ shutdown/ waited like 45 sec or 1 min. / then booted it would temp. fix the problem for as long as my fone was on the cable. At some point after that many weeks/roms later i noticed it was working correctly again, So I had decided it was a glitch in the rom, But i`m not a Dev. or fone guru so I really dont know what it was, but hope this helps someone.... PEACE!! ~bboyphrog1~beatz`n pieces krooh~
flexte said:
Well i was using a BB charger that worked fine up until this morning. i bought my phone when it first came out so it wasnt easy to find a charger made for it at the time. i never had a problem until today. i also noticed that the Usb terminal on my device was bent. i called htc but they charge way too much to fix it. i have no idea how or when the terminal broke but it does still charge when pluged into pc or into the wall. ill have to spend $80 to have ppctechs fix it.
Click to expand...
Click to collapse
The slight diagonal slant on the bottom right? It's supposed to be like that. All AT&T Tilts (and I'd assume TyTN II's, but I've never had one to compare) have a mini-usb port that looks that way.
i looked at a 8525 and the usb terminal was straight. i even took a pencil and straightened mine out. it should be bent. that wouldn't make sense because the charges slot is not bent. i think the problem is that one side of the terminal is not soldered to the board and can easily be broken. in another thread 3 people have the same issue. as far as the car charger goes ill do some testing but until today it was charging fine while the phone was on.
this issue is known ,it even happens with the htc tynt.... by simlpy rebooting while in the charger it starts working again ..at least with mine.
I've had the same problem. I went to the lcoal AT&T store and they said they never heard of it so I thought it was just me. It looks like many of you have the issue. I wish I knew what it was. It was really bad with my 8525,
i thought Faria developed a cab to fix this issue in the hermes forum? might be worth having a search for it and when i get home i will see if i have a copy on my pc.
any of you guys get anywhere with this? I have exactly the same problem. posted in a couple of other threads actually.
Not sure whether the usb port is damaged, but it's certainly is slightly "down" on the right hand side.
It charges perfectly on the mains and perfectly from usb, but not in the car.
I have used a normal car charger, spent £50 on a Carcomm powered mount and tried one of the separate chargers that you plug the standard mini usb cable into. Nothing works. This is driving me crazy (if you'll excuse the pun!) a the primary reason I bought the Kaiser, was for GPS.
Thanks
well i also just found out 2 of my minisync cables dont work anymore. 1 of them still charges the phone but neither of them sync the phone anymore. it still syncs fine through a normal usb cable.
I am using a moto Razr car charger and it works fine so far.
Okay, confirmed on my replacement Tilt: The USB port is arrow straight. Someone earlier mentioned it being lower on the right side & indeed my DEAD DEVICE was as such. Looks like a bad job of connecting the port to the device.
NOTE!!!!!!
It's a good idea to take a look at your charger before you plug it in to make sure the charger USB connector is not bent or mi-sshappened.
i have the same problem i went through 4 att car chargers adn 5 phones. They are crap. Its not the phone its the charger if you play with it you will see that it comes and goes. The end tip on the charger is bad doesnt make a good connection. i have yet to find a good car charger.
Mine stopped charging using the car charger supplied and a brodit. A friend's kaiser charges OK with the same chargers.
No-one has mentioned it in this thread, but my phone, shows "charging" in the battery control panel and the LED lights up to confirm this. The percentage charge value decreases as though it isn't being charged!
As others have done I noticed that the corner of the plastic centre of the connector nearest the reset hole was slightly bent and I assume (though can't remember doing so) that I missed the reset hole with the stylus tip and pushed it in. Menu driven resets for me from now on!
HTC Europe didn't know anything about this fault, so seem to be happy to repair / replace it under warranty. It's with them at the moment, so I'll have to wait and see.
RSVRover
faria said:
this issue is known ,it even happens with the htc tynt.... by simlpy rebooting while in the charger it starts working again ..at least with mine.
Click to expand...
Click to collapse
that didnt work for me. only one of my chargers work now.
RSVRover said:
Mine stopped charging using the car charger supplied and a brodit. A friend's kaiser charges OK with the same chargers.
No-one has mentioned it in this thread, but my phone, shows "charging" in the battery control panel and the LED lights up to confirm this. The percentage charge value decreases as though it isn't being charged!
As others have done I noticed that the corner of the plastic centre of the connector nearest the reset hole was slightly bent and I assume (though can't remember doing so) that I missed the reset hole with the stylus tip and pushed it in. Menu driven resets for me from now on!
HTC Europe didn't know anything about this fault, so seem to be happy to repair / replace it under warranty. It's with them at the moment, so I'll have to wait and see.
RSVRover
Click to expand...
Click to collapse
Please let me know the outcome. mine is getting worse by the day.
Now I'm confused.
Because the device charges over USB I just assumed it would draw <500mA (the max output of a USB port) but the specs say it draws up to one amp.
Having owned a high-drawing device before (Axim x50v) I know that trying to pull this out of a USB port can blow your motherboard. So are these safe to charge over USB??? How does the device know whether its being charged over USB or mains - are there different charging pins on the connector?
This never used to happen, but I switched to a new charger (my car charger with a wall socket adapter) and now, when the phone is charging, any touch input to the screen gets..well..I suppose the best word is "Garbled". If I try and switch between homescreen pages, it will almost appear as if it is "struggling" to do so, like, it will shake and stutter and maybe get halfway to the new page but will stay on the first. When browsing, about eight of ten touches to anywhere on the screen will immediately send the page to magnifying glass mode.
This only occurs when charging, and only since I started using this new charger adapter. Any ideas?
hettbeans said:
This never used to happen, but I switched to a new charger (my car charger with a wall socket adapter) and now, when the phone is charging, any touch input to the screen gets..well..I suppose the best word is "Garbled". If I try and switch between homescreen pages, it will almost appear as if it is "struggling" to do so, like, it will shake and stutter and maybe get halfway to the new page but will stay on the first. When browsing, about eight of ten touches to anywhere on the screen will immediately send the page to magnifying glass mode.
This only occurs when charging, and only since I started using this new charger adapter. Any ideas?
Click to expand...
Click to collapse
I had a very similar problem but what i had was an USB AC adapter. I plugged the phone into the USB slot using the USB cable. Everything seems to be charging fine but then it starts to really screw up.
This did not occur when recharge from the laptop. So It was easy to conclude that there was some kind of problem with the charging unit compatibility.
Maybe you should also try a different charger.
Hello, I have could this problem is happening to other people but. Haven't could a solution for it.
Whenvi Plugg my galaxy into the charger the touch screen either doesn't respond or pressing in a spot I haven't pressed. I think this problem is because the screen is capacitive but this doesn't happen at all with my ipod touch.
This makes the phone impossible to work with with while its plugged in
Any solution for this?
it might be defective
or simply it needs to be re-calibrated
mine doesn't do it
but i have read on the forum many people had the same problem as you do
they either took it back for warranty or got it fixed some how
i think it should work as soon as you recalibrate the touch screen when it's plugged in
How do I calibrate it?
Are you not using the original charger?
I'm getting this too, with the original charger, but not with a usb charger.
Seems to be related: http://ip208-100-42-21.static.xda-developers.com/showthread.php?t=700612
And this: http://ip208-100-42-21.static.xda-developers.com/showthread.php?t=673330
Happens with my brothers I9000 too! D:
On mine if I'm not TOUCHING the phone case or it's charging the touchscreen gives unreliable input.
90% of the time this isn't a problem because I have to hold the phone in order to use it.
Sorry to dig up an old thread, but I just got this phone and I am having the exact same problem. Using either the original charger or an apple ipod charger I have the same issue. It also happens on the original ROM and on Darky's. It works fine while it's plugged into a computer and charging though.
Has anyone been able to remedy this problem without sending it in for warranty repair?
hi, i get this too, only happens when plugged in.
anyone find a fix?
ok, i kinda found it out.
Its because the charger being used isnt properly grounded or something which means there is a small electrical charge being picked up the screen which causes the screen to jump about. Doesnt happen when the phone isnt plugged in or when its being charged via micro usb connected to my laptop so I think the charger is to blame not software
according to someone else its because of
It will be high-frequency noise on the DC output voltage of the charger. Chargers use a high-frequency DC-DC converter method and the cheaper ones don't do a very good job of filtering the high frequency out of the DC at the other end. This noise enters your phone and plays havoc with the sensitive circuits in the capacitive touchscreen.
It is nothing to do with grounding of the input side of the power supply; when you ground the output side (the USB plug) with your hand, your body capacitance filters out some/all of the noise.
but anyway at the end of the day its still a fault with the charger whatever the technical details maybe.
Is there a charger out there that will not experience these problems?
sk1d said:
Is there a charger out there that will not experience these problems?
Click to expand...
Click to collapse
I have the same problem with the original charger. But by using the charger that came with my logitech mouse, I have eliminated the screens erratic behaviour while charging. The original charger is collecting dust now.
gammalerik said:
I have the same problem with the original charger. But by using the charger that came with my logitech mouse, I have eliminated the screens erratic behaviour while charging. The original charger is collecting dust now.
Click to expand...
Click to collapse
Could you post some details about your charger? 2/3 Pin? voltage? amperage? Input/output amounts? etc...
sk1d said:
Could you post some details about your charger? 2/3 Pin? voltage? amperage? Input/output amounts? etc...
Click to expand...
Click to collapse
The wall-charger has an output of 5V, 1A. Input is 100-240V, 50/60Hz, 180mA. Looks like 3-pins. It came bundeled with my Logitech G700. Also, when I plug the phone in, I get those three choices you usually get when charging from a pc: "Kies-mode", "mass storage" etc. I just press return on my phone when I see this. So it seems as if this charger is a bit more advanced with some kind of chip in it. Perhaps any Logitech/Microsoft-charger will do.
gammalerik said:
Looks like 3-pins.
Click to expand...
Click to collapse
Pin was the wrong word, I meant prongs. Does it have two or three that go into the wall socket? The third being the grounding wire.
I have a charger for my bluetooth headset but it only outputs 550mA. Is that enough to charge the phone. The original is 700mA.
Hi guys, I have a samsung galaxy s vibrant from bell, and lately I have not been able to use my phone while charging. My phone lags and does not respond when i try to unlock the phone to go to the main screen.If I want to make phone calls and while charging the phone i would have to dial the number first then plug in my charger. But once its plugged in the touch screen does not respond at all. please hellp!! I;ve tried deleting apps to see if i have downloaded anything that may have caused it but it hasnt worked. I tried soft reseting, taking the battery out. So far nothing has worked. Any one else with the same problem?
Same Problem
I have the same problem with my Samsung Vibrant....I don't see the same problem with my usb to wall-outlet charger....however, the touch screen freezes up when I use a third party charger. Please help.
I have noticed this too. Anyone smart why this happens? Its not just galaxy s phones btw.
Noticed the same problem. While charging, the Touch screen doesn't work. Especially while using Swype, the Line is jagged.
....and automatic PIN
I have exactly the same problem (i9000, Sweden, 2.1 update 1). Unfortunately I did not think of the charger so I kept removing the battery
When connected to the charger when starting the phone and I have many pictures or video files on my memory card, the text "media scanning" and "media scanning finished" (or something like that) keeps repeating in the system info. When the PIN code windows appears, numbers are being highlighted quite randomly. Sometimes the "ok" button is indicated as well, so sometimes I have been forced to use my PUK code because all 3 PIN code tries had been done with noone actually touching the phone
Again, without the charger (and/or many media files) it works.
Maybe froyo could help
I am on 2.2 Froyo and it still happens for me.
Same problem with Froyo JPO!!
Problem with Selective devices or all the devices are having the same issue?
We need more confirmations.
thats because third party chargers have different voltage and charge that will affect your capacitive touchscreen. HTC chargers are recommended, since they are also touch screen based phones.
just searched for this problem and solved it immedieatly thanks to hoopjunkie's comments
i've 2 chargers,
the one came with the phone has output 5.00V 0.7A
one claiming to be samsung has output 4.75V 0.4A
I had never used the phone while in charge so never experienced this issue until 5mins ago
for some reason i was using the "fake" one since.
lesson learned check the voltage values, which i normally do, but trusting too much to the sellers got me.
ow and for the record I'm on froyo 2.2 i9000xxjpc
I am using the Stock charger. Same problem even with the USB Charging.
i wonder if theres a solution to this issue?
i am really getting tired of this problem -- i am using a nokia n97 charger.
i want to be able to download stuff from the market while the device is plugged in.
cylent said:
i wonder if theres a solution to this issue?
i am really getting tired of this problem -- i am using a nokia n97 charger.
i want to be able to download stuff from the market while the device is plugged in.
Click to expand...
Click to collapse
dump the nokia charger and get a genuine galaxy one
Hi, I got the same problem: no touchscreen when connected to USB of my laptop. I already noticed my phone acted weird next to my laptop. Once I ejected my cd-player the touchscreen worked again! So the electronics in the cd-player interfered with the touchscreen.
I've got a Rogers Captivate running 2.2 and I am having this same problem... it only seems to happen since the upgrade. This is using the stock charger and USB. Are there any possible solutions to this?
Same happens for my Samsung Galaxy S while charging from the stock wall charger. But the touchscreen works perfectly fine while charging from a PC's USB port using stock microUSB cable.
I think the problem lies with the charging current. The electrical field generated around the charger's wire due to a 500 mA (5 V) charging current supplied by PC's USB port seems to be doing no harm, while the 700 mA (5 V) charging current of the stock wall charger seems to be generating an electrical field high enough to confuse the capacitive sensors of the touchscreen. Perhaps the usage of a shielding core -- just like on the stock microUSB cable -- on the stock wall charger would help in negating the ill effects of the electrical field generated by a 700 mA charging current, but I'm not sure.
Anyway, my current workaround for the problem is obviously to charge from a PC's USB port. When a PC is not around or not switched on, I'm using a 5V, 500mA charger which was bundled with my iTech bluetooth headset. Obviously, both these methods have a shortcoming, that is slow charging compared to that of the stock wall charger. In my experience, this is a problem only when I use my phone for Wi-Fi tethering, in which case the battery capacity percentage continues to drop even when connected to a 500 mA charger. The positive side of 500 mA charging is that it gives a slighly better service life for the battery.
Same problem here, send my SGS to samsung and problema solved new display and display circuit its a know issue with some SGS's
Just wondering, is anyone else experiencing issues like this?
http://www.youtube.com/watch?v=Vhk0Wc0uMoM
My AC charger might be bad (or there might be a lot of EMI in my room).
I swapped to my Nokia N900's charger and the problems went away, so it might not be my phone.
I'm going to try using my N900's charger on this phone and see if the issue crops up again.
Is this happening to anyone else?
try getting a new charger first. i have the same problem with my thunderbolt and stratosphere using their own chargers, but no issues with a droid 1 charger.
also my thunderbolt's LTE connection got worse over time and now it can barely hold an LTE connection at all. it also has trouble connecting to LTE unless i'm very close to the tower. stratosphere works fine, so i wonder if the charger messed up the phone.
I have a POS charger I bought off E-Bay...
If I lay my Vivid on top of the coiled up wire while everything is plugged in the phone will actually start hitting buttons and actions randomly. It's violent enough to unlock itself and it even sent a one letter SMS to a friend
I think cheap shielding in the cable is allowing current to flow around the phone and the touchscreen triggers from it. If I use a quality charger then no issues...