[Q] Removing the notification toggles? - Captivate Q&A, Help & Troubleshooting

I want to learn how to remove the notification toggles for my own personal use. Does anyone have tips or knowledge on how to do this?
I know that it is possible; an older incarnation of Ultimate ROM for the i9000 had it, but I've asked the developer, who doesn't recall how to do it.
My phone also doesn't like MTD, so CM7 is out of the question. Plus, I've been on GB bootloaders for a while, and don't want to flash those again.
Thanks.

There you go. This is Apex 9.2 systemUI modded to hide toggles in quick panel. This keeps all other notification bar mods intact for you.
Add it to system/app using root explorer and reboot.

Related

[Q] How to get Jkay deluxe on JW1?

Hi everyone,
I think one of the best features on a custom ROM so far is the extended power menu that can be customized. I found it in Galaxy ROM and I think it is also in SauROM. You can choose toggles that you want to have in the power menu and this way it is possible to access them even from the lockscreen. It was created by Jkay who is no longer active in SGS development because he got a SGS II.
So my queston is, how is it possible to get the Jkay deluxe (how it is called) power menu and also the customizable notification toggles out of the ROM and put it into any other deodexed JW1 ROM?
As far as I know the following files are responsible for:
SystemUI.apk - Status Bar
android.policy.jar - Lock screen and Power Menu
framework-res.apk - theming and notification toggles (?)
tsmparts.apk - Settings tool for Jkay deluxe (?)
Is this correct?
Any suggestions how to accomplish this?
Thanks!
I have similar questions. I like a way that was used in SBamboo XWJW1 ROM, now to be used for XXJVU. Where can we get these apks? Which post should we read?
Cheers!
it seems that most devs don't implement it anymore as it is not supported anymore. there is a old thread by Jkay but it just gives you the files to add the mod, but does not show how to do the changes to a newer firmware.
The last firmware I saw it on was DJBROM on JW1. So the dev djb77 should know how to implement it. He plans to release a JVU version soon.

[Q] Transparent Status Bar?

So, I've been looking around, and it seems the only way to get a transparent status bar for the Galaxy Ace is to flash a custom rom. Is this true? Or have I not looked into this properly?
I'd really like to be able to use one, preferably without having to switch to a different rom. I have stock...
Check the SGA themes and apps section there are couple of mods for transparent status bar I bet there'll be one for stock
------------
May The Force Be With You
is it real
check this out:
http://forum.xda-developers.com/showthread.php?t=1452118 there are a lot like this one, check out the themes and apps section
The only transparent theme for stock is MEIZU ported by Seilent. But it's only for 2.3.3 and 2.3.4 stock roms.

Questions about two ROMs

Hi!
I have questions about more ROMs. I tested the last time nearly every ICS-ROM. I hope that someone can help me....GALAXY S I9000
-CM9: Why there aren`t some options that in other ROMs are still exist for example AOKP? For example the option to change the lockscreen is not there yet
-AOKP: Every time i go to the option to edit the Lockscreen i get a FC of Rom-Control......why?
-From were i can find the Rom-Control.apk? Can i install it on every AOKP-Rom?
Thank you for your help!
I can't answer CM9 queries I haven't been on it yet, that is more of a feature request that you need to take up with them..
AOKP: What do you mean edit the lockscreen? Do you mean the wallpaper? That is now fixed, download the latest from my sig below.
Rom control should already be on every AOKP rom, so you shouldn't have to install it.
However if you still want it, it's located at /system/app
Hi Talon,
thank you for your answer.
I mean generell the option "Locksreen"....When i want to enter this option on the AOKP-build31 i get an FC from Rom-Control....
I really don`t understand the thing with CM9. I love Cyanogenmod but i want more customizable options that are included in AOKP
I just re-read the lockscreen thing for CM9. Are you sure it isn't there settings/security/screen lock
I think you need to re-flash AOKP possibly with wipe. But use titanium backup (seems to be more through sometimes) or via manage apps, find rom control and clear data. Hopefully that works otherwise you will possibly have to reflash.
Im using the lockscreen options on my phone right now, so it must just be your phone.

[Q] New to flashing roms!

I just flashed the new ARHD 10.2 today and it works flawlessly... I have a couple of questions about where to go from here.
I would really like to find some themes/mods for this ROM. I had one for the battery but i guess it broke when I updated from 10.1. Does anyone know a good place to go to find battery indicator mods (like 1% and colorization mods) for de-odexed 4.2.2 ROMs?
Secondly, I have been flashing several different zips over the last 48 hours... first time, have gone a little overboard . What would be "safe" for me to remove from my virtual SD? If I dirty flashed 10.2 can I remove 10.1? Do the Zips actually do anything after they've been installed in recovery?
Thanks!
Secondly said:
Yea you can just delete them all if you really wanted to but I always like to keep one (typically the newest one) on the phone if I have the space. This is just incase something goes wrong but if its stable then it usually doesn't need to stay there.
Click to expand...
Click to collapse
TugBoatTed said:
I just flashed the new ARHD 10.2 today and it works flawlessly... I have a couple of questions about where to go from here.
I would really like to find some themes/mods for this ROM. I had one for the battery but i guess it broke when I updated from 10.1. Does anyone know a good place to go to find battery indicator mods (like 1% and colorization mods) for de-odexed 4.2.2 ROMs?
Secondly, I have been flashing several different zips over the last 48 hours... first time, have gone a little overboard . What would be "safe" for me to remove from my virtual SD? If I dirty flashed 10.2 can I remove 10.1? Do the Zips actually do anything after they've been installed in recovery?
Thanks!
Click to expand...
Click to collapse
For themes it would be better to flash trickdroid 7 because that rom has a dedicate themes package zip witch has the battery percentage mod, 5x6 app drawer and if you want, you can make the appdrawer, status bar and sense weather widgets transparent or semi transparent. I think it has it has other themes like holo status bar and other themes for the sense weather widgets. It has also a lot of battery mods like asop and others too.
demongrim said:
For themes it would be better to flash trickdroid 7 because that rom has a dedicate themes package zip witch has the battery percentage mod, 5x6 app drawer and if you want, you can make the appdrawer, status bar and sense weather widgets transparent or semi transparent. I think it has it has other themes like holo status bar and other themes for the sense weather widgets. It has also a lot of battery mods like asop and others too.
Click to expand...
Click to collapse
If I flash trickdroid will I need to wipe phone again? I hate doing that... Using Helium to backup stuff but I still end up having to do so many customizations and options.

[Q] status bar transparency GB 2.3.4 stock

hi guys, me first apologize for my bad English, second I hope you can help me, I need please take the bar transparent state, I have tried many methods and none have worked for me, even with the UOT kitchen creating the flashable zip and nothing, always gives me error, use ADW launcher and I've unchecked the option to hack and not, the most you have accomplished apart from closures forcer is a status bar with a sort of lag.
I'm on 2.3.4 Gingerbread STOCK droid3 / 5.7.906.xt862 verizon.en.us / stock + root + adw launcher.
I hope you can help me, thanks
thats a no no
felipe0428 said:
hi guys, me first apologize for my bad English, second I hope you can help me, I need please take the bar transparent state, I have tried many methods and none have worked for me, even with the UOT kitchen creating the flashable zip and nothing, always gives me error, use ADW launcher and I've unchecked the option to hack and not, the most you have accomplished apart from closures forcer is a status bar with a sort of lag.
I'm on 2.3.4 Gingerbread STOCK droid3 / 5.7.906.xt862 verizon.en.us / stock + root + adw launcher.
I hope you can help me, thanks
Click to expand...
Click to collapse
I dont thinks its posible to do that on gb.

Categories

Resources