I want to learn how to remove the notification toggles for my own personal use. Does anyone have tips or knowledge on how to do this?
I know that it is possible; an older incarnation of Ultimate ROM for the i9000 had it, but I've asked the developer, who doesn't recall how to do it.
My phone also doesn't like MTD, so CM7 is out of the question. Plus, I've been on GB bootloaders for a while, and don't want to flash those again.
Thanks.
There you go. This is Apex 9.2 systemUI modded to hide toggles in quick panel. This keeps all other notification bar mods intact for you.
Add it to system/app using root explorer and reboot.
Ok thought I would take the rubbish out of the dev thread.
So far I have done this:
Flashed JVT from start with custom .PIT file. Speeds up Ice Cream sandwich, I've tested this and it works great. Visually no lag and it works on top of any lag fix you do after wards.
[HOW TO]
http://www.darkyrom.com/community/i...-12mb-in-nand-symlink-modem.6361/#post-131323
So here it is:
http://dl.dropbox.com/u/43088692/12MB_Gain_NAND_Symlinked_Modem.bin.zip
Download and instructions - Everything you need is in that zip (its not a CWM zip by the way) load it to your PC and unzip. Follow the PDF print outs I have included and also as an acknowledgement to ykkfive's hard work (this references directly back to coolya's work from XDA https://github.com/cmsgs/utilities/tree/master/pit-stuff)
http://ykkfive.blogspot.com/2011/08/freenandmod-get-more-space-from-nand.html#.TvimZtSO3TQ
http://ykkfive.blogspot.com/2011/09/switch-to-another-modem-version-without.html#.TvimaNSO3TR
1. You can do this by taking a CWM Nandroid backup of your current setup.
2. Flash back to stock using Odin and the files I have provided in my drop box zip file.
3. I have added modem.bin file, script manager apk, buszybox apk and superuser apk for everyone should they wish to test the script and modem on the base JVT setup that they just flashed.
4. When it works correctly boot into recovery and then restore your CWM Nandroid backup and viola your done
5. Boot up - NB: You will notice you have no reception until you run the script in script manager.
You set on moot the script to run and in ICS it seems to work better than on JVT (where I had to initiate the script even after checking the onboot function).
Click to expand...
Click to collapse
Swype for Ice Cream Sandwich - I am so effin sick of the stock keyboard. Went on the Galaxy Nexus pages for a rummage around see what I could find?
Swype for Gnexus
http://forum.xda-developers.com/showthread.php?t=1412493
Nova Launcher! Yeeeew finally a replacement. ****s on the standard launcher, can make GOSMS my sms app in the dock setup just how I always wanted it. Go Launcher Ex fails big time on ICS so don't bother installing it (even though I love it) the animations on GO Launcher cause big time crashing hahaha test for ya self for LOLs
You will ditch the stock launcher in an instant once your on this. It allows resizing of widgets and app draw also has widget draw like standard launcher.
http://forum.xda-developers.com/showthread.php?t=1389071
Ice cream sandwich clock download from market. It looks like the clock in the pictured icon of the clock....not the gay looking analog clock that comes with it that I tried for ages to work out how to change the skin when you can't.
Haven't got a link for it atm but its in the Market so just download from there.
Feel free to post up anything additional that would be helpful
I am about to attempt this: Smart dialer for 4.0.3??? hmmm
http://forum.xda-developers.com/showthread.php?t=1402364
Will keep you guys posted.
http://forum.xda-developers.com/showthread.php?t=1389071
Heya everyone. I am not sure if bumping is allowed on here, but I noticed I didn't get any replies from anyone and I know there a hell of a lot of Ice Cream Sandwich users out there now.
Feel free to share any add ons.
Thank you for sharing this, i cant understand why google decided to build a dialer without t9 index.
since i got t9 dialer i never keep the numbers in my head anymore!
pzayx said:
Thank you for sharing this, i cant understand why google decided to build a dialer without t9 index.
since i got t9 dialer i never keep the numbers in my head anymore!
Click to expand...
Click to collapse
Whats the difference? I am running a tweaked version of MyUI ICS ROM on my Phone and freakin rocks!
The MyUI version of the ICS ROM based off OneCosmic's RC 2.11.
- List of Mods. 1% increments on the battery using the similar style to Perka's MOD of Elin ROM ICS. Uses the ICS font for numerals upto 100 and has blue lightning bolt whilst charging.
- Uses Nova Launcher and Glitch Kernel but with the nice white standard Google boot image and tweaked Boot animation as well.
-Center Date in notification dropdowm menu
Drop box is here:
http://dl.dropbox.com/u/43088692/MyICS_RC_2.1.5.zip
Acknowledgments go out to Perka and MyUI
Original threads:
MyUI ROM
http://forum.xda-developers.com/showthread.php?t=1328461
Perka's MOD Elin ROM
http://forum.xda-developers.com/showthread.php?t=1107201&page=24
Feel free to try it out. Just do Nandroid backup of your ROM and then flash this, then restore Data from your Nandroid backup and your back in action
anyway to stop vibration on lockscren?
Sent from my GT-I9000 using XDA Premium App
I think there is, u need to search in settings of the phone.
Thanks alot, Ive been looking for swype and a good and proper replacement launcher!
swype thread link broken?
didnt find a way to disable vibration on lock screen. if you disable haptic feedback in settings, it still vibrates.
furthermore, the vibration on haptic feedback is very high and not configureable.. thats annoying. disabled it, using now a keyboard with custom vibration length (htc_ime mod, yeah - still running under ics)
jaegerpung said:
Thanks alot, Ive been looking for swype and a good and proper replacement launcher!
swype thread link broken?
Click to expand...
Click to collapse
That one doesn't work after i tested it. The look of it is nice but the apk is made for a much bigger phone. It stretches too wide for the screen lol.
I went back to FlexT9 keyboard. By far the best swype out there that I have ever used. I keep deviating but I keep returning back to that old faithful hahaha. The issue with ICS is that it won't let you over ride the standard ICS keyboard to use anything other than native. So you need to freeze the keyboard apps with Titanium Backup. Then install the keyboard of your choice...in my case FlexT9. then I go and remove the apks from system/app like LatinIME and any associations with the standard keyboard, dictionary etc and put them in a folder on my SD card for "just-in-case"....cause that Justin bloke has saved me on many occasions lol.
I managed to use SwiftKey X without any problem - I do not need to freeze the stock ics keyboard apps.
i guess u knw wt i have done ..
You've found my very very very old thread that I started when ICS only first came to SGS...hahah
Hi guys.
I need to find AOSP lockscreen for my deodexed JVU?
There also could be CRT-off and extended power menu.
I don't want anything else. Thank you
Here is the link:http://forum.xda-developers.com/showthread.php?t=1434433
Thanks, but as far as I know, exactly this mod doesn't have AOSP lockscreen.
This guy once said that he didn't like it
Correct me if I'm wrong
I Search also the screen.
or a tut for self mod. Over the UOT Kitchen dosn't work.
This was a mod of stock XXCLK7 ROM that enable Tablet UI in Jelly Bean.
I've made some changes in stock TabletUI graphics because of not optimal display in TAB2 7.
Here are list of features:
- ability to display quick button only in landscape mode (added option in settings to hide the button in portrait)
- adjusted miniapps icon in portrait mode
- modified Notification panel in landscape mode (no more off-screen and wider)
- moved settings from item of notification-panel menu's to title of navigation-panel (wast of space)
- smaller width of navigation-bar button's in portrait mode
- i don't remember
ScreenShot:
[
Download ClockworkMod flashable zip:
ODEX XXCLK7
http://ul.to/3shinb08 Odex - TabletUI ver 1.0beta
http://ul.to/b50dvnju Odex - Restore to Stock Phablet UI
DEODEX XXCLK7
Code:
Deodex build was not tested by me but seems to work. Before install [U]make a cwm backup[/U]!!!
Test TabletUI Deodex - Mirror Link
Test Restore PhabletUI Deodex - - Mirror Link
Credits:
0jmaster0 - for the idea and first deodex patch
barrmulio - for the Nexus 7 initial patch
The deodex mod wont download for me .
Sent from my GT-P3110 using Tapatalk 2
Could you please elaborate what and how did you that? I'd like to make this for P3100 XXCLL2 also
Cheers!
Good mod :good: By the way works with my vodafone firmware too.
Two questions:
1) How did you changed width of landscape notification bar? It is too wide for me I guess, that it is not in dex, what xml files did you edit?
2) Is there any way to disable moves of status bar icons? I mean, that miniapplications button in no more in center. It takes place of screenshot button, if it is - moves to position of the menu button.
Can you make mod with changes only in notification bar(but with stock width for landscape)? Thank you again
Strange it works for me!
dogredwing1 said:
The deodex mod wont download for me .
Sent from my GT-P3110 using Tapatalk 2
Click to expand...
Click to collapse
I made a lot of changes that i don't rember but if you want i can give you the sources.
_TB_TB_ said:
Could you please elaborate what and how did you that? I'd like to make this for P3100 XXCLL2 also
Cheers!
Click to expand...
Click to collapse
0jmaster0 said:
Good mod :good: By the way works with my vodafone firmware too.
Two questions:
1) How did you changed width of landscape notification bar? It is too wide for me I guess, that it is not in dex, what xml files did you edit?
2) Is there any way to disable moves of status bar icons? I mean, that miniapplications button in no more in center. It takes place of screenshot button, if it is - moves to position of the menu button.
Click to expand...
Click to collapse
1) I added in dimens.xml on values-sw720dp-port the item "notification_panel_width" for portrait, the landscape is readed from values-sw720dp. If you change this values you can build an personalized version. Finally i have changed TabletStatusBar.smali to force update size when the configuration change.
2) The miniapps button was placed by samsung statically in the center of the bar, so it can overlap on a icon (if there is an icon in the center). So i placed next to the last button. With the modified width of button the problem can be resolved bu i've not tried. You can try to reposition on center, simply change position and proprierties of Imageview id "traybar_handler" in "tw_system_bar.xml" such as in original SystemUI (At least you can add some margin to accomplish the best result)
Happy New Year!
I want to ask one more thing - how did you move settings button to title of notification panel? I'm trying to compare files of mod and original and can't find anything. And, as additional problems, systemui.apk from your firmware and from my vodafone are almost completely different. Maybe it gives some problems with displaying and crushing it in my firmware...
0jmaster0 said:
Happy New Year!
I want to ask one more thing - how did you move settings button to title of notification panel? I'm trying to compare files of mod and original and can't find anything. And, as additional problems, systemui.apk from your firmware and from my vodafone are almost completely different. Maybe it gives some problems with displaying and crushing it in my firmware...
Click to expand...
Click to collapse
Happy new Year!!!
I simple hided the settings item (@id/settings) from tw_system_bar_notification_panel.xml and then added an ImageView with the same ID in tw_system_bar_notification_panel_title.xml.
If you want to look at original XXCLK7 SystemUI you can download from here.
Hi, I tried the deodex versions on my kwbr expresso rom.
TabletUI cant be flashed, cwm says bad zip. Downloaded both from main dl link & mirror. Both has zip error.
Was able to flash Restore phabletUI, messed up my Apex screen, lost the uper and lower margins. Crashed but came back. Reverting to the older version for kwbr rom. Thanks anyway.
Sent from my GT-P3110 using XDA Premium HD app
MonJovi said:
Hi, I tried the deodex versions on my kwbr expresso rom.
TabletUI cant be flashed, cwm says bad zip. Downloaded both from main dl link & mirror. Both has zip error.
Was able to flash Restore phabletUI, messed up my Apex screen, lost the uper and lower margins. Crashed but came back. Reverting to the older version for kwbr rom. Thanks anyway.
Sent from my GT-P3110 using XDA Premium HD app
Click to expand...
Click to collapse
What's the version of firmware used in your kwbr rom?
This keep making touchwiz crash after flasing.
Sent from my SCH-I535 using Tapatalk 2
epgen said:
What's the version of firmware used in your kwbr rom?
Click to expand...
Click to collapse
kwbr expresso 3.0
dogredwing1 said:
This keep making touchwiz crash after flasing.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
It's a common problem you can fix it, see here: http://forum.xda-developers.com/showpost.php?p=35402926&postcount=32
I first flashed the latest Tablet UI from this thread:
http://forum.xda-developers.com/showthread.php?t=2032941
Got stuck at boot logo. Tried installing Phablet restore, still stuck. Then tried Tablet UI in this new mod thread, still stuck at Samsung boot logo. Running stock CLK7, no modifications other than root. Any ideas? I'd like to fix this without a full wipe if possible.
ivorycruncher said:
I first flashed the latest Tablet UI from this thread:
http://forum.xda-developers.com/showthread.php?t=2032941
Got stuck at boot logo. Tried installing Phablet restore, still stuck. Then tried Tablet UI in this new mod thread, still stuck at Samsung boot logo. Running stock CLK7, no modifications other than root. Any ideas? I'd like to fix this without a full wipe if possible.
Click to expand...
Click to collapse
You can reflash clk7 stock firmware to restore it without full wipe, but what is the first mod that you have installed?
Will this work on P3113 XXCLK7 ?
Answer my own Q - it won't
epgen said:
You can reflash clk7 stock firmware to restore it without full wipe, but what is the first mod that you have installed?
Click to expand...
Click to collapse
I tried looking for a stock CLK7 firmware image, couldn't find one though. I've taken a nandroid of the broken state (kicking myself for not doing so before flashing mods) and gone to AOKP for now. Actually quite a nice rom, but no IR support is a bummer, since it's one reason I chose this over the Nexus 7. Wondering if this broke because I wasn't de-odexed first, but I thought this mod was specifically built to apply to the stock rom. I have a P3113, fyi.
The first mod I flashed, as I mentioned, was the most recent version of your tablet UI fix from the old thread here. That is, unless you count the method I used to root, which I got from here.
I'm wondering if I'd have to go back to the original ICS image, re-upgrade to CLK7 through Kies, and then restore just the data partition from the nandroid backup. Assuming that only files under the system partition were changed by this mod, I would think that would work, but I'm clearly no expert on this.
Sorry - New at This
Hello,
I apologize that I am new at this and this is probably a dumb question. I've never rooted or flashed any of my Android devices, but with the new interface they pushed to 7' tablets with Jelly Bean, they have forced me to learn. I hate it.
I really have tried to look, but haven't found what I am looking for so I am hoping someone could point me in the right direction. Is there a step by step guide on how to do this somewhere? I'm a computer tech, so I am sure with a basic guide I could figure it out. I just don't know enough about the process and I am afraid of messing my tablet up if I just wing it...
Thanks,
epgen, hello again Trying to make such mod for russian 4.1.2 firmware, already succsseded in odexing(script not worked too, odexed through manual commands in adb-shell in CWM) and modifying files, but I have one question: clock with upper part of notification panel in landscape easily goes off-screen even when 2-3 notifications available. Have you fixed it? If so - can you say how? Thank you
Hello
Could someone tell me a guide to add toggles in the status bar for stock rom vjkpb?
I've tried to use others systemui modified for others roms but notifications force close, tried to add with many guide (guides for Galaxy Ace/y) but smali values are always different and in the end it does not work.
Sorry for my request, I'm not being lazy, but I've tried a lot and it did not work ...
Sorry for my bad English