My x1 now has a big problem!
When u start it, it will show you spl always.
Unless u start it with usb power...
And then it get in the windows mobile.
But u can not connect to pc.
Although it show u which way want to connect to pc, there is nothing happen in pc.
No USB Device found!
I try another x1, it was successful.
But mine is not.
And if u connect to pc, then u can not get charge with usb port unless u restart it...
It means u can not flash it with activesync.
But it can get flash with spl screen.
So, I know that
When u get in windows mobile, the usb is failure.
I flash other rom, but it doesn't work...
Related
HI,
because pluging in the usb cable into my laptop caused it to shut down I tried to perform an upgrade (BA_TMUK_14200_112_11300_Ship.exe) of my tmobile mda III over bluetooth.
The device was connected and after the first screen of the upgrade process the computer lost connection with the device and since then all I see on screen of my mda is Serial v2.05.
I got a powered usb hub and connected the device thorugh it to my computer, but windows doesn't recognise it anymore as a pda, but just as an unknown usb device.
I tried hard reset of the mda (camera+power+reset) and I tried to exit boot loader mode (rec+power+reset) but nothing happens.
Please help me, I am desperate.
Thnx
what the hell have u done?
upgrading via Bluetooth? have u read the wiki before upgrading? ofcourse upgrading via bluetooth will not work. ull definitely lost connection even suspending the device how much more if the device is in bootloader mode? how sad.... try it again and this time use maupgradeutnoid.exe..turn your device into bootloader mode, kill activesync..put ur device in the cradle wait till the pc recognizes the device..(something like your device is now ready for use) and then click maupgradeutnoid.exe..remember just wait till the pc recognizes your device, don't click the maupgradeutnoid.exe immediately after putting the device in the cradle cause that will not work..this time read the wiki page mate..
next option
With the MaUpgradeUt_noID.exe I get error 150:romupgrade utility error
and with the BaUpgradeUt.exe I get error 100:connection error
(I read the wiki now
What else can I do?
If I connect my blueangel directly to my laptop, the laptop shuts down, so I have to use a hub.
What else can I try?
ok...
what can u see on the screen of ur device once u put the device to cradle..(serial to usb?) ok. remember, once u put ur device in the cradle and if u want to use maupgradenoid.exe for the first time, u have to wait at least a minute before u activate or click the maupgardenoid.exe.. another option is to use mtty.exe.. just search mtty in this site and ull fine the procedure on how to use that utility..once done, u can start upgrade ur device to ur desired rom..or try update ur device to ur shipped rom using BAUpgradeUt.exe to avoid that error100.. unless u have already upgrade ur device to different roms before.
screen
when I connect it to the usb cable it says serial
ohh..
maybe there something wrong with ur device or the cable ur using. have u tried using the usb cradle instead? putting ur device in the crdle or connect it using usb cable (bootloader mode) the Serial should be changed to USB..otherwise t u get the connection error and u can't upgrade ur device for that..
Hey All.
I am on vacation, and just brougth a new notebook (lovely Medion Akoya), and i want to sync with my diamond. However, i downloaded the active sync from the ms homepage, and i get the "Unrecognized device" error all the time.
Yes, i tried to use different cables, yes i tried to deactivate the advanced network, however, i doesnt seem to recognize it at all.
Even if i do a softreset + volume down, i just get the SPL1-40 screen, but eventhou my phone is plugged in the USB, it doesnt say that, only "serial" when i disconnect.
I've been searching this forum the entire day, and i cant seem to find a solution. So, i kindly ask the gurus help me
Diamond running 0.95 bePe and pc running xp sp3.
Kind regards, Heien.
Try to flash a stock ROM and check if you run into the same problem.
In order to sync, you must be running the handset normally, don't enter bootloader mode.
Did the system prompt you for drivers the first time you connected it to the PC? Activesync 4.5 provides the rndis drivers.
the problem is, i cant even flash my device, i tried to flash it, but i get a connection error with the tool.
I know about the bootloadermode, and that i am not able to sync in that state, but i just wanted my pc/diamond to recognize the connection between them. The system did not prompt me for drivers, it just went straigth to unrecognized device. i even tried to point the the driverupdate tool to the drivers folder with the rndis drivers in the as folder.
-i also tried to hardreset my device.
Try doing the same on a fresh stock XP install, without firewall or anything similar.
We need to figure out if it's a problem with the handset itself or your OS/PC.
Try another USB port (DON'T use hubs).
Enter bootloader mode. When you connect it to the USB, it should at least toggle from serial to usb.
If that's the case, at least your USb is working well.
Guys,
I've been trying to install HardSPL to get this Touch X 9.0 Rom..
But every time i try to install it ask's me if i've connected the phone properly to the USB etc..
What can I do T_T ?
The phone is fully syncronized with ActiveSync
you can try other usb slot or a new computer .
nat
xRaitei said:
Guys,
I've been trying to install HardSPL to get this Touch X 9.0 Rom..
But every time i try to install it ask's me if i've connected the phone properly to the USB etc..
What can I do T_T ?
The phone is fully syncronized with ActiveSync
Click to expand...
Click to collapse
1) To be ultimately sure, take out everything that is connected on all USB ports (and I mean, ALL) EXCEPT your Xperia. Also, uncheck the "Advanced Network Functionality" of ActiveSync.
2) If you have the same problem after following my advise, change to another USB port. Try every single port.
3) If you still get disconnections, try another computer (or laptop).
4) Problems still persist? then check your USB cable itself (or the USB ports) if it is faulty.
For some odd reason I can no longer get the the "serial" status to change to "usb". It charges but does not connect to activesync. I flashed many many times so I am not a noob at this but I might be making a noob mistake.
What I am using: SPL 1.54 (I use USPL 2.5). I am currently using Miri's v23 manilla 2.5. I am using the same pc (xp) and cables to flash.
What I've tried:
- used 3 different pc's and the original pc
- 4 different usb cables
- ticking/unticking the "enable faster data syncing" box in settings>connections>usb to pc
-ticking/unticking "allow usb connections" in activesync
-if I leave the cable in AND THEN put the phone in bootloader mode, the status is blank. When I remove the cable, it returns to "serial"
When the phone is on, it just doesn't seem to react (vista and xp)to the cable being plugged in. The led just shows that it's charging.
I pulled an all-nighter and I'm stumped.
Maybe you need to update the USB drivers. Same thing happened to me but it worked after updating the USB drivers as per this link.
http://forum.xda-developers.com/showthread.php?t=524619
I forgot the most important part-
Since the pc does not recognize that there's something plugged in, I cannot select the "HTC USB Sync" under device manager and proceed with updating the drivers. I don't think I need to but at this point I'm trying everything.
Unless there's another way of updating drivers without the phone showing up on the device manager...
Updated the usb drivers by plugging in an old htc device. The pc was able to recognize the other htc device and was able to switch from serial to usb.
But after the update, there was no improvement for the blackstone status.
Anyone? The phone still doesn't recognize the usb cable whether the phone is on or in bootloader, it just charges.
Any help is appreciated!
supadupa111 said:
Anyone? The phone still doesn't recognize the usb cable whether the phone is on or in bootloader, it just charges.
Any help is appreciated!
Click to expand...
Click to collapse
Seems something wrong with your device. Try to hard reset and do it again?
Or if you still cant connect to usb. there is another way to upgrade without connecting to pc. After upgrade to new ROM, try it again whether it can connect to pc or not? Here is some tips for you.
Connect your SD card to PC through microSD card. Copy all files from your SDcard to new folder in your PC. Then, right click on the microSDcard disk-->full Format by FAT32 (this step is very important).
After formatting SDcard, copy back all files to SDcard . Rename .nbh to BLACIMG.nbh (for Blacktone) and copy it to SDcard.
Insert your SDcard back to Touch HD. Turn off your device by Power button.
Go to Boot loader mode. Push and hold Vol. Down + press Power button.
After that your device with have a white screen with text " Press to power button for continue upgrade" press power button and it will start upgrade Rom.
You can check this video for more practical actions on youtube.(this video for HTC diamond2 but it's almost the same with Blacktone just different in rename step)
Hope it helps and cheer
Thanks for the tips =)
I've did a hard reset twice and still no luck.
I've tried to flash through SD but since I use USPL, it just hangs when I try.
If I have SPL 1.54.0000, is there something that can be flash through the SD without USPL?
supadupa111 said:
Thanks for the tips =)
I've did a hard reset twice and still no luck.
I've tried to flash through SD but since I use USPL, it just hangs when I try.
If I have SPL 1.54.0000, is there something that can be flash through the SD without USPL?
Click to expand...
Click to collapse
I have not tried this. I am on HSPL 1.56olinex but you can try my suggestion cause I think it's the only one you can choose now. I never ever use USPL. I think you can do it step by step and carefully.
Regard
I have a problem with the diamond and needs to change ROM/SPL and other stuff, but it won't recognize that the phone has been plugged in. I have tried 5 different USB cables and 3 different computers. I don't have HTC warranty. I've done 5+ hard-resets.
Please help.
First, what OSes? For instance: win 7 doesn't recognize the phone if it tries to connect in active sync mode.
I've always used windows xp, in the past it worked.
hi,
try to connect your htc twice : my computer does not recognize my htc at first plug but when I retry in less than 1 minute, my htc displays popup menu and I can choose USB/active sync, I click done and then my computer recognizes it. I don't know if it will work with your device but you can try that ^^
Thanks for the suggestion,
I've already tried that a lot of times, nothing doing.
ok, did you try to change the status of your usb connexion ?
I mean : settings>connections>usbtoPC> then try these 4 combinations together :
- enable faster data synchronization (try both modes on/off)
- ask me about usb connection type (try both modes on/off)
I can get into bootloader, but never know that you could flash ROM in there. Is there a guide?
Also, I have a problem with a flickering screen that some threads here suggest changing SPL version to fix. Is it possible to change SPL using bootloader?
I just downoaded WM6.5 to my phone and did a ROM flash from internal storage, but USB still has problem & flickering screen still there. I need to be able to change the HardSPL w/o connection to the computer.
Is it possible to load some of the .exe in the HardSPL package and run it on the phone?
Someone help,
Thanks
Perhaps it's simply due to your PC firewall ?? Deactivate it and try to plug your htc again...
the problem is that my the computer doesn't connect with the phone via the USB cable.
just try to disable your PC firewall before connecting your device.
sorry I cannot find CustomRUU.exe on this forum, i did find DiamondCustomRUU.exe on the wiki. However, the interface for it is the same as the RomUpdateUtility.exe, which requires activesync connection.
I did proceed anyways by entering bootloader(Voldown + softreset) and run the utility -> nothing works. Then I try the USB trigger mode (Voldown + back + softreset) and run the utility -> nothing works.
I am tempted to put the HardSPL in the internal storage and rename it DIAMING.NBH and flash it but I do not know the consequences.
Thank you for your replies,
I'd appreciate more help