Related
I'm completely stock right now with the new update H7 and new to this flashing and rooting stuff. I've been reading everything and seems yall got all this down to just clicking one button and the program does the rest.
So before i try this everyone says backup backup backup soo that leads to...
1. Is there anyway to back up my phone like it is now since i haven't rooted. Just in case something goes wrong
Or
2. is the only option i have is to do the one click root thing and back up the rom then try to flash the 2.2 ?
and
3. If something goes wrong and 2.2 doesn't flash right..could i just go into recovery mode and click reinstall packages and be back to the h7 (if i don't root to back up)? or does that recovery option get deleted/overwritten when i try to flash 2.2 with odin one click?
thanks for any help
You don't really have to back up your phone. It is up to you if you have important info, games etc that you want to keep. Lots of times games were either purchased from the market so they will be attached to your profile. Use appbrain to sync your market as well. Otherwise there really is no way to do a backup unless you are rooted.
so basically i'll have to root to back up the phone at its current state? ...i'm not really worried about having to reinstall everything i've only bought beautiful widget so far but i think froyo flash deletes everything anyways right? but i just want to be able to go back to stock in case something goes wrong and the flash doesn't work or say the phone screws up and i need the warranty.
If the flash goes wrong can i go back to recover mode and hit the reinstall and will it reinstall the h7 i have now back to the phone or will that recovery option be deleted when you try to flash the 2.2?
In rom manager you have the option to back up your phone in its current state. If you get boot loops or continuous force closes you would need to use odin to flash back and do root again to load rom manager. Then you would be able to load your backup.
Sent from my SAMSUNG-SGH-I897 using XDA App
ok thanks man, ...one more thing does the one click root/unroot work just fine with the 2.1-update1 right? the h7 firmware wont make a difference when trying to root?
That should have no issues with 2.1.
My experience with JH7 to 2.2 became a huge issue when I used Master Clear....
I could not for the life of me get the phone into Recovery or Download mode using the three button press or any other combo of USB battery pulls and button presses.....ended up biting the bullet and using the SDK method which turned out to work flawlessly.......after hours of searching, googling, reading and experimenting.....
I now have two Captivates in Stock froyo mode.
Okay so, I used the Odin JI6 Froyo flash and everything went peachy. Also installed the OCLF and the Voodoo one from off the market.
Problem is that the root wasn't total/complete and the update.zip was replaced but could not be used in full rooting or something along those lines (I'm not certain).
Anyhow, the phone worked great for the last three days, then this evening the browser wasn't refreshing facebook so I restarted the phone. After the AT&T logo it went blank and it vibrated like a beating heart constantly before restarting again after about 5 minutes, which then made it beat like a heart again etc.
I tried going to the boot screen/safe mode and reinstalling the update.zip (which didn't work because of the failed root), tried clearing my data cache, and then also i formatted the sd card. Nothing.
After that I tried putting it into download mode and flashing Odin, which didn't work. It said it was sending the PIT files but stalled there and never changed. I tried a master clear and it didn't go anywhere either.
Any advice?
You should've read the forums more before flashing and saved yourself this headache. You will need this to flash back to stock.
use thishttp://forum.xda-developers.com/showthread.php?t=731989
Dowload Odin and the drivers on the first page of the thread. Install the drivers. Run Odin as Administrator. You need to then remove your SIM, battery and external sd card if you have one. Hopefully your button combo will work to get you into download mode. Next, put battery back in, hold the vol + & - buttons and plug in your USB from pc to phone and do not let go of the volume buttons, do not touch power and you should then enter download mode. Yellow screen with android shovelling. Odin should see your phone, push start on Odin and let Odin do it's thing. When Odin finished and your phone reboots you will be back on stock JF6. While your phone is powered on and on your homescreen master clear with Odin.
You need to read a bit before flashing anything again. One Click Root doesn't work with Froyo, neither does Voodoo. Had you taken some time and read you would know this.
Good Luck, I hope this helps.
ApplCobbler said:
Okay so, I used the Odin JI6 Froyo flash and everything went peachy. Also installed the OCLF and the Voodoo one from off the market.
Problem is that the root wasn't total/complete and the update.zip was replaced but could not be used in full rooting or something along those lines (I'm not certain).
Anyhow, the phone worked great for the last three days, then this evening the browser wasn't refreshing facebook so I restarted the phone. After the AT&T logo it went blank and it vibrated like a beating heart constantly before restarting again after about 5 minutes, which then made it beat like a heart again etc.
I tried going to the boot screen/safe mode and reinstalling the update.zip (which didn't work because of the failed root), tried clearing my data cache, and then also i formatted the sd card. Nothing.
After that I tried putting it into download mode and flashing Odin, which didn't work. It said it was sending the PIT files but stalled there and never changed. I tried a master clear and it didn't go anywhere either.
Any advice?
Click to expand...
Click to collapse
I feel your pain. Been there, done that. Although your process of bricking reminds me of a more sophisticated approach....lol....mine was out of total complete noobness.
Question:
1) Can you manually boot into download/ recovery manually using 3-button combo? If so you have hope (meaning your phone is basically "un-brickable").
-Bet that made you feel better huh?
-If you can't use 3-button to go into either modes, then you are in the same boat as i was. Hope you are still within your 30 days, or at least warranty. One way to tell if you can/ can't go into either modes is to check your "Batch #."
a) remove battery
b) look below your Serial Number
c) if your Batch # = 1007 = You are safe
d) Batch # = 1008 = good luck
2) When you say Brick, do you have the unfortunate "Phone (!) PC" screen? If yes, then its a "soft brick." If No, then its a "hard brick." I would start to worry.
3) According to your post, it sounds like you have the Regular Odin and NOT the One click version, correct? If you have regular Odin, i would at least try the One click. Regardless, both versions should be able to get you back to stock (JF6), but we already know how well your current version Odin has gotten you.
If you need help, there are TONS more knowledgeable people here in the Captivate forum than I. They should be able to help.
Good Luck!
1. Yes I can go into download and recovery mode. I've attempted to reinstall the 2.2 off odin but it doesn't take. It is the One Click Odin Froyo, it does not work. The Comm screen is yellow, and the logs just say it's loading the PIT and doesnt ever change from there.
2. I have seen that phone ! computer screen, but I'm not stuck at it. When that came on I held the vilume buttons and the power button and it went back to regular boot up (which obviously still doesn't work).
3. It is the one click. I'm not smart enough to use something that involves more than one click.
Stop trying to flash Froyo. Flash back to stock then master clear. Then go read the threads in the development section of the forum before flashing anything. The fact that you tried to apply Voodoo to Froyo and you tried to use one click lagfix on Froyo shows you haven't read and don't know what your doing. You corrupted something by flashing incompatable stuff, flash back to stock and master clear for now. Read a bit and then flash Froyo.
ApplCobbler said:
1. Yes I can go into download and recovery mode. I've attempted to reinstall the 2.2 off odin but it doesn't take. It is the One Click Odin Froyo, it does not work. The Comm screen is yellow, and the logs just say it's loading the PIT and doesnt ever change from there.
2. I have seen that phone ! computer screen, but I'm not stuck at it. When that came on I held the vilume buttons and the power button and it went back to regular boot up (which obviously still doesn't work).
3. It is the one click. I'm not smart enough to use something that involves more than one click.
Click to expand...
Click to collapse
LOL . I as well. I know enough to be dangerous.
Now, on to business. If you actually read what Rhiannon has posted for you, and click on the actual link itself, you will realize that the version of Odin you are using (yes the one click) is NOT the correct version for flashing back to stock (JF6/ Eclair.....NOT froyo). Remember, if all else fails....."The One must return to the Source...." <-----Plus 9,000 to whoever can guess where thats from.
Obviously your phone falls within the 1007 since you have the Luxury/ Advantage of manually entering Download/ Recovery mode....i wish i did.
Rhiannon224 said:
You should've read the forums more before flashing and saved yourself this headache. You will need this to flash back to stock.
use thishttp://forum.xda-developers.com/showthread.php?t=731989
Dowload Odin and the drivers on the first page of the thread. Install the drivers. Run Odin as Administrator. You need to then remove your SIM, battery and external sd card if you have one. Hopefully your button combo will work to get you into download mode. Next, put battery back in, hold the vol + & - buttons and plug in your USB from pc to phone and do not let go of the volume buttons, do not touch power and you should then enter download mode. Yellow screen with android shovelling. Odin should see your phone, push start on Odin and let Odin do it's thing. When Odin finished and your phone reboots you will be back on stock JF6. While your phone is powered on and on your homescreen master clear with Odin.
You need to read a bit before flashing anything again. One Click Root doesn't work with Froyo, neither does Voodoo. Had you taken some time and read you would know this.
Good Luck, I hope this helps.
Click to expand...
Click to collapse
Well Said!
Thanks Spartan, I'm guesing too much skimming and not enough reading.
OP when someone says flash back to stock they don't mean Froyo. I don't mean to sound harsh, really I want to help you, but you have to read and follow instructions when you ask for help or it becomes frustrating to all that try to help you. If you want to get out of the mess you are in read my original post and use the Odin thread I linked for you please.
Rhiannon224 said:
Thanks Spartan, I'm guesing too much skimming and not enough reading.
OP when someone says flash back to stock they don't mean Froyo. I don't mean to sound harsh, really I want to help you, but you have to read and follow instructions when you ask for help or it becomes frustrating to all that try to help you. If you want to get out of the mess you are in read my original post and use the Odin thread I linked for you please.
Click to expand...
Click to collapse
I see you are still on Cog 2.2 B5......dont care for 8 or any of the new ones? Or Sheps? What's your story?
Mine is simple....Patience. lol
I am on Cog beta 5.5 with 2e recovery kernel, I swapped the kernel myself before DG updated. It has working GPS and it is pretty zippy, I am not noticing lag. I was going to flash beta 8 last night but there were some modem issues and people losing 3g. Then 8.1 came out and I read the changelog and it isn't much different from my setup. I didn't go to beta 7 because Tw Launcher was removed and you need that for Kies to see your phone so that's a no go. Shep is using an I9000 kernel and I don't want to mess with I9000. I liike to flash my phone but I need to use it as a phone. I have tried some ROMS that I didn't think worked as well so I stick with what has worked best for me. I have all the mods on it, stock lock screen, battery circle mod, and gps works. I may try AOSP this weekend but I work all week not at a computer and I can't just flash all day. I find that things can go wrong and it takes time to reconfigure apps and contacts and if anything goes wrong it sould take a while to fix and I haven't had time to mess with it this week. I see you are still on 2.1, that is patience. I tried out Froyo and when gps worked for the first time ever since having the phone I'm sticking with Froyo. I am waiting for Voodoo to make ot to 2.2 then it will be perfect.
Also, I forget to edit my signature if i only try something for a day or two. I was on Froyo for a few before i remembered to change my sig.
Rhiannon224 said:
Thanks Spartan, I'm guesing too much skimming and not enough reading.
Click to expand...
Click to collapse
Alright, Jesus I get it, I didn't do my homework; repeating it over and over isn't going to help any more. Thank you for the info, I'm downloading the right Odin right now and I'll do the fixes you said.
Rhiannon224 said:
I am on Cog beta 5.5 with 2e recovery kernel, I swapped the kernel myself before DG updated. It has working GPS and it is pretty zippy, I am not noticing lag. I was going to flash beta 8 last night but there were some modem issues and people losing 3g. Then 8.1 came out and I read the changelog and it isn't much different from my setup. I didn't go to beta 7 because Tw Launcher was removed and you need that for Kies to see your phone so that's a no go. Shep is using an I9000 kernel and I don't want to mess with I9000. I liike to flash my phone but I need to use it as a phone. I have tried some ROMS that I didn't think worked as well so I stick with what has worked best for me. I have all the mods on it, stock lock screen, battery circle mod, and gps works. I may try AOSP this weekend but I work all week not at a computer and I can't just flash all day. I find that things can go wrong and it takes time to reconfigure apps and contacts and if anything goes wrong it sould take a while to fix and I haven't had time to mess with it this week. I see you are still on 2.1, that is patience. I tried out Froyo and when gps worked for the first time ever since having the phone I'm sticking with Froyo. I am waiting for Voodoo to make ot to 2.2 then it will be perfect.
Also, I forget to edit my signature if i only try something for a day or two. I was on Froyo for a few before i remembered to change my sig.
Click to expand...
Click to collapse
It's all good. I was just curious, that's all. As far as the 19000, that makes two of us. I tried it, hoping that the voodoo + OCLF combo would work.......WRONG! lol
When 7 came out and i too noticed the TW removed, i thought Everyone would take a plunge into that, since many have complained that TW i/o was just unbearable. Oh well. As far as everything else you mentioned, i feel the same way.
Edit: "I9000"
spartan062984 said:
It's all good. I was just curious, that's all. As far as the 19000, that makes two of us. I tried it, hoping that the voodoo + OCLF combo would work.......WRONG! lol
When 7 came out and i too noticed the TW removed, i thought Everyone would take a plunge into that, since many have complained that TW i/o was just unbearable. Oh well. As far as everything else you mentioned, i feel the same way.
Edit: "I9000"
Click to expand...
Click to collapse
I know you were curious, I figured I would just tell you my story. I froze Tw Launcher with TIBU for now, I've used Launcher Pro for months and didn't wanmt a second running in the backround, i will unfreeze it when I need it. Yeah, I try stuff anf when it doesn't work the way I need i go back to what works. I've been using DG's stuff since SRE and I update when it is a better package for my needs, so far his stuff works for my needs. I want Voodoo though, lol. Sory to hijack the thread, lol.
ApplCobbler said:
Alright, Jesus I get it, I didn't do my homework; repeating it over and over isn't going to help any more. Thank you for the info, I'm downloading the right Odin right now and I'll do the fixes you said.
Click to expand...
Click to collapse
Again, sorry if I sounded harsh, i am just trying to help you get out of the mess you're in. You can flash Froyo in the future you just need to learn about these ROMS and fixes so you don't have these kinds of headaches. I will stop repeating now. i really hope this works. I know your stressed and wasn't trying to give you a hard time, I just thought you were missing something and I am from NY and we are pushy Let us no if you get it working.
I have made some mistakes along the way too and it was because I didn't read the instructions clearly so I do understand how you felt.
Rhiannon224 said:
I know you were curious, I figured I would just tell you my story. I froze Tw Launcher with TIBU for now, I've used Launcher Pro for months and didn't wanmt a second running in the backround, i will unfreeze it when I need it. Yeah, I try stuff anf when it doesn't work the way I need i go back to what works. I've been using DG's stuff since SRE and I update when it is a better package for my needs, so far his stuff works for my needs. I want Voodoo though, lol. Sory to hijack the thread, lol.
Click to expand...
Click to collapse
""Sory to hijack the thread""
I started it. No worries. I too would love to have voodoo. So far, with stock OS, ext2 + OCLF seems to work for me....for now. Keep in mind that i too would like to have the functionality of a Phone. That was my intention in the first place...lol.
Okay first of all, I would like to apologize if this is being posted in the wrong forum, or if I am upsetting anybody by posting this. I have searched all over for a couple days trying to figure this out. This is my last resort, and I'm hoping you guys can help. All of your time and understanding is much appreciated!
So a little background. About a week ago, I rooted my AT&T Captivate 2.2(build number 1012 if that helps) using Superoneclick, and then flashed CM7.1 using clockworkmod. I was not satisfied with CM7.1(terrible battery for me, other various reasons). I then downloaded MIUI (not sure which version, the one available on the premium version of clockworkmod) and flashed it using clockworkmod. This started with the cm bootscreen, and then went to an MIUI bootscreen that played a little tune. The miui screen looped, and it would not go past this.
After rebooting and running into the same thing, I went to f\attempt to find a solution. I thought I backed up my rom, but it had been erased (issue with the external sd I think). I used an odin one click I found on here, but this odin one click brought me back to eclair 2.1, instead of 2.2. Up until now, I could get into both download and recovery mode using the three button method, and now I can't. I am not sure what to do exactly. I have read about getting it into download mode using adb, but I'm not sure if that would work in my situation, and I'm not too educated on adb or android sdk. I stayed up almost all night last night, and now have researched most of today, not making much progress.
Thanks again for your time!
Just to clarify have you used all button methods in order to try to get into download mode. Seems as though flashing bootloaders may have f'ed up you combos. I have a couple suggestions. I'll edit my post as I find the urls to post for you
Stock GB ROM you should be using -- http://www.mediafire.com/?05nemq5yyn5fuqf, this one has bootloaders, but preferably you should use stock odin roms that don't mess with the BL's (after this of course, since yours are messed up right now).
Now of course this depends upon you getting into download mode. If you can use ROMmanager (btw, I don't recommend you download your roms from rommanager, as that will not always be the most up to date and may not be the one for you) to get into recovery mode, then from there go to advanced then reboot download. However some kernels do not support this. Try the cable methods before trying this method.
First of all, I appreciate your help Mikel.canovas. I have used all the button methods. I can no longer get into recovery or download. (Romtoolbox enables me to get into recovery(2E), but not download). I now have root access, but am not able to sideload apps, and apparently rommanager free isn't available on the market. I did buy rommanager premium, but unfortunately now that I basically reset my phone, it doesn't show up as bought (known issue, apparently not resolved?), and even after I bought it again, it says I need the free version to even use the premium version.
Should I go through the process to be able to sideload apps? Or will romtoolbox do the trick? Rom toolbox gives me the option to install a rom from my sd card. Should I use that, and select the GB ROM you provided? I'm not sure I understood exactly how you want me to get that GB ROM onto my phone.
What I want to eventually have is either MIUI or rom fasty on my phone. If possible, could you give me some steps on how to reach that goal?
Thanks again for your time. Eclair on the captivate is not pleasant, especially since I had a taste of CM.
Well first off I highly recommend Mosaic over CM or Fasty, solely because of performance and battery life. However that is all subjective.
Ah since you're rom is sending to 2E recovery, you're not rooted with cwm. You need to flash another kernel that supports this. Afterwards, If you can get into CWM, I recommend putting CM onto your sdcard and flashing from there. After booting into CM hold down the power button, press reboot, choose reboot download. See if that works. If not, does adb reboot download work for you? If not again, I recommend trying another USB port, reinstalling drivers, trying different button combos. I've had issues getting into download mode in the past and, trust me, it is VERY frustrating.
Well first of all, before you back into flashing stuff, don't flash to stock unless you have done everything possible with the tools on your phone. I'm assuming you gave it at least 5 minutes to boot up, as the first boot can variably take longer. You could go into recovery and wipe stuff, or you could have gone back to CM7. A flash to stock is probably never necessary in the situation you reported.
Anyway, if you can get into recovery, maybe try getting a kernel that allows you to reboot into download from recovery. Although that will depends on what kernel you are on right now, as I know speedmod kernel has that option, but you would need to get to download to flash that.
And as another poster wrote, have you tried all button combinations?
korockinout13 said:
Well first of all, before you back into flashing stuff, don't flash to stock unless you have done everything possible with the tools on your phone. I'm assuming you gave it at least 5 minutes to boot up, as the first boot can variably take longer. You could go into recovery and wipe stuff, or you could have gone back to CM7. A flash to stock is probably never necessary in the situation you reported.
Anyway, if you can get into recovery, maybe try getting a kernel that allows you to reboot into download from recovery. Although that will depends on what kernel you are on right now, as I know speedmod kernel has that option, but you would need to get to download to flash that.
And as another poster wrote, have you tried all button combinations?
Click to expand...
Click to collapse
Or download SGS Kernel Flasher from the market. You can then flash kernels with the app. without having to go into download mode. Very handy.
Once again guys, thank you for your time. A little more information:
Kernel:
2.6.29
[email protected]#12
Baseband:
I897UCJF6
Let me know if you need any other information.
I am able to get into download mode using the terminal emulator in rom tool box. (The free version of rom manager is no longer on the market)
I was hoping one of you could give me a step by step of what I need to do, with links to downloads.
And yes, I have tried all off the three button methods. Also, I probably should have researched more before I flashed back to stock.
Sent from my SAMSUNG-SGH-I897 using XDA App
wwcjr91 said:
Once again guys, thank you for your time. A little more information:
Kernel:
2.6.29
[email protected]#12
Baseband:
I897UCJF6
Let me know if you need any other information.
I am able to get into download mode using the terminal emulator in rom tool box. (The free version of rom manager is no longer on the market)
I was hoping one of you could give me a step by step of what I need to do, with links to downloads.
And yes, I have tried all off the three button methods. Also, I probably should have researched more before I flashed back to stock.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
If nobody beats me to it, I will post you some links tomorrow when I'm on my laptop.
Oh, and miui won't really give you better battery life than CM7. It basically is CM7 with a different UI. I loved CM7 a ton, so if you are having issues with it, let me know! With the right kernel and other settings, battery life is pretty decent, as long as you charge nightly.
Sent from my ICS i897 Captivate
wwcjr91 said:
Once again guys, thank you for your time. A little more information:
Kernel:
2.6.29
[email protected]#12
Baseband:
I897UCJF6
Let me know if you need any other information.
I am able to get into download mode using the terminal emulator in rom tool box. (The free version of rom manager is no longer on the market)
I was hoping one of you could give me a step by step of what I need to do, with links to downloads.
And yes, I have tried all off the three button methods. Also, I probably should have researched more before I flashed back to stock.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
What is the build number of your phone? It's located under your battery, looks something like 10.06,10.07, 10.08 and so on
Alright, thank you, I will be checking back tomorrow.
Eventually what I want is to have the working 3 button combos again for both download and recovery mode, and either the miui, mosaic or rom fasty on my phone.
Easy flash GB BL's and you won't have to worry about 3 button problems!
If you didnt do a Master Clear, now would be the time. Make sure you back up anything you want to keep. MC will erase EVERYTHING on your internal SD
Remove your Micro SD, and your SIM
Download:
OneClick Root
SideLoadWonderMachine This also has CWM, 3ButtonFix and ROM Manager in the zip
Make sure you have Debugging enabled
Connect to your PC
Run One Click Root, and follow the instructions, reboot
Run Sideload Wonder Machine and direct it to install ROM Manager
Copy the update.zip(CWM) and 3Button Fix to your phone
Open ROM manager and "reboot to recovery"
You'll go thru the boot twice to get to CWM
In CWM install the 3 Button Fix
I usually pop out the battery and check it before I put the ROM in.
VERY IMPORTANT!!!!! DO NOT TRY TO USE THE 3ButtonFix while you have a GB ROM installed you WILL brick your phone. It only works on 2.1, and 2.2 ROM's
using this one click package I now am able to manually enter download and recovery :
http://forum.xda-developers.com/showthread.php?t=1129821
However, The recovery is still 2e..
kangi26 said:
What is the build number of your phone? It's located under your battery, looks something like 10.06,10.07, 10.08 and so on
Click to expand...
Click to collapse
1012, do you think any of my problems would have to do with the build number? WHen I got it, it had froyo with the working button combinations.
Sorry, I didn't see that until now.
I now have clockwork recovery, and I'm about to try out fasty. Thanks again guys.
So can I delete this thread? And if so, should I? I've found plenty of threads that seem outdated, and fill up the search engine.
wwcjr91 said:
1012, do you think any of my problems would have to do with the build number? WHen I got it, it had froyo with the working button combinations.
Sorry, I didn't see that until now.
I now have clockwork recovery, and I'm about to try out fasty. Thanks again guys.
So can I delete this thread? And if so, should I? I've found plenty of threads that seem outdated, and fill up the search engine.
Click to expand...
Click to collapse
The only reason I asked about the build # is because the 10.08's were pretty commonly known to have 3 button issues. Also, anything above 1012 and using Odin1 Click could soft brick. I was just checking as I was offering info
kangi26 said:
The only reason I asked about the build # is because the 10.08's were pretty commonly known to have 3 button issues. Also, anything above 1012 and using Odin1 Click could soft brick. I was just checking as I was offering info
Click to expand...
Click to collapse
Trying to fix my buddys cappy. Its rooted on T-Mobile and running stock 2.1 rom. I'm not a Samsung guy so how do I get cwm and a 2.3 rom? The build number is ECLAIR.UCJH7
Sent from my Incredible 2 using xda premium
Go to this Stickied Thread in the Development Forum... http://forum.xda-developers.com/showpost.php?p=18370235&postcount=1
And u will have to use one with the Bootloaders included, because to run a gingerbread firmware u gotta have the gb bootloaders.
Post #3 has the "leaked" KK4 (Been confirmed to be the same as official).
4-2ndtwin said:
Go to this Stickied Thread in the Development Forum... http://forum.xda-developers.com/showpost.php?p=18370235&postcount=1
And u will have to use one with the Bootloaders included, because to run a gingerbread firmware u gotta have the gb bootloaders.
Click to expand...
Click to collapse
Since its already rooted do I need a computer?
Sent from my Incredible 2 using xda premium
Yep. Because these are Odin or Heimdall One Clicks.
You can't just flash to a GB firmware/rom from Eclair/Froyo without using Odin or Heimdall to at least get the Gb Bootloaders. You cannot just go through CWM recovery unless u already have the GB Bootloaders.
Of course u can get it all through mini Kies, the official GB 2.3.5 KK4 update that is.
HI!
Just recently signed up so I can't seem to post this question in the FASTY III forum....I kind of understand why xda has this policy about new members not being able to post int he developmental forums...but still...
I recently moved from FASTY II to III...ran into a bunch of issues but I managed to resolve most of them by going through the forums. What I am having trouble with is my inability to get to the Recovery menu. I have tried to go there thru the shutdown menu, by doing the button holding trick, and even from ROM Manager... none of those seem to work for me. Very frustrating... All those mentioned attempts only bring up an ATT screen which wont go away until I reboot the phone into a normal start....
So why am I unable to enter Recovery mode?
Any help would be much appreciated. Thank you!
nycmon said:
HI!
Just recently signed up so I can't seem to post this question in the FASTY III forum....I kind of understand why xda has this policy about new members not being able to post int he developmental forums...but still...
I recently moved from FASTY II to III...ran into a bunch of issues but I managed to resolve most of them by going through the forums. What I am having trouble with is my inability to get to the Recovery menu. I have tried to go there thru the shutdown menu, by doing the button holding trick, and even from ROM Manager... none of those seem to work for me. Very frustrating... All those mentioned attempts only bring up an ATT screen which wont go away until I reboot the phone into a normal start....
So why am I unable to enter Recovery mode?
Any help would be much appreciated. Thank you!
Click to expand...
Click to collapse
in terminal emulator type su and then reboot recovery maybe it work
or may be you just flashed unsupported recovery
nycmon said:
HI!
Just recently signed up so I can't seem to post this question in the FASTY III forum....I kind of understand why xda has this policy about new members not being able to post int he developmental forums...but still...
I recently moved from FASTY II to III...ran into a bunch of issues but I managed to resolve most of them by going through the forums. What I am having trouble with is my inability to get to the Recovery menu. I have tried to go there thru the shutdown menu, by doing the button holding trick, and even from ROM Manager... none of those seem to work for me. Very frustrating... All those mentioned attempts only bring up an ATT screen which wont go away until I reboot the phone into a normal start....
So why am I unable to enter Recovery mode?
Any help would be much appreciated. Thank you!
Click to expand...
Click to collapse
I have been having the same problem recently, but not just with this rom. I have flashed many roms to my device, but it appears that almost everytime i try to flash something now, the same exact thing happens as the OP. any information on what is wrong or how to fix this would be greatly appreciated.
When you boot up...do you guys get a scrambled screen that looks like white noise?
that's caused by froyo bootloaders on a gingerbread ROM.
Not all That familiar with fasty though...dunno of the jump from 2 to 3 was froyo to ginger, just a guess.
studacris said:
When you boot up...do you guys get a scrambled screen that looks like white noise?
that's caused by froyo bootloaders on a gingerbread ROM.
Not all That familiar with fasty though...dunno of the jump from 2 to 3 was froyo to ginger, just a guess.
Click to expand...
Click to collapse
Sometimes this happens, but i am usually still able to use the rom after i wait for awhile. Recently it just gets stuck at the ATT logo screen and does nothing else.
HERE is a package containing JUST the ginger boots.
MAKE SURE YOU HAVE A GOOD PHONE/PC CONNECTION, FLASHING BOOTLOADERS IS THE ONLY WAY TO TRULY HARD BRICK
studacris said:
HERE is a package containing JUST the ginger boots.
MAKE SURE YOU HAVE A GOOD PHONE/PC CONNECTION, FLASHING BOOTLOADERS IS THE ONLY WAY TO TRULY HARD BRICK
Click to expand...
Click to collapse
i just tried it with a solid connection and it almost instantly said failed in the red box. now i cant turn it on or get to download mode so im pretty sure it is hard bricked. is there any way you can help me with this?
EDIT: False alarm, i can still get to download mode so i can ODIN back to stock, but i do not know if i should risk it again
Whew that was close.
You can flash to stock using a bootloader less package, that way if it fails it can't hard brick.
Then if that works, find an entire stock gingerbread package with bootloaders included, and flash that instead of just the bootloader one click. this again, will involve risk, but full Odin package seem to work better on some phones than one clicks do.
I tried to flash the bootloader again and it succeeded. i then proceeded to try and flash Fasty KK4 v1.1 and once again i was stuck at the ATT logo. For some reason with every rom i flash, when the logo pops up, it starts dim and then get bright. After it gets bright, it stays that way and it is a real pain not being able to use custom roms anymore.
If you have the GB bls just make sure you follow LL's instructions in the OP for Fasty. I had the same issue, but it was me mistake for not following the istructions properly
studacris said:
When you boot up...do you guys get a scrambled screen that looks like white noise?
that's caused by froyo bootloaders on a gingerbread ROM.
Not all That familiar with fasty though...dunno of the jump from 2 to 3 was froyo to ginger, just a guess.
Click to expand...
Click to collapse
i DO get a very colorful white noise screen whenever it boots up ...the screen goes away once it fully reboots....I wondered about it but just assumed it was a quirk of the FASTY III package...
Is Rom Manager a froyo based app?
No, ROM manager is poop. Not implemented on galaxy devices properly, and won't work past eclair, and even them it was severely limited to just downloading an update.zip to your sdcard...which you could put there manually with out having to root...
FORGET ROM MANAGER EXISTS
studacris said:
No, ROM manager is poop. Not implemented on galaxy devices properly, and won't work past eclair, and even them it was severely limited to just downloading an update.zip to your sdcard...which you could put there manually with out having to root...
FORGET ROM MANAGER EXISTS
Click to expand...
Click to collapse
Really? Rom Manager helped me a lot until this Fasty III installation....even in my previous rom Fasty II it worked fine and did great for backing up and restoring backups....saved my asss a few times with those restores lol....But if this program doesn't work for fasty III what comparable program can I use?
Also I still can't intorecovery mode...nothing works...I even tried using ADB and Droid Explorer....nothing seems to get it into recovery mode...
Am I going to have to flash back to stock ROM and try reinstalling fasty iii again? This seems all so tedious lol...
OR is there a way for me to flash back to Fasty II without having to go back to stock rom? or without having to access the recovery screen?
Thank you^
All that backing up and restoring you did with ROM manager can be done in cwm recovery and that's what you should use from now on. No app needed at all.
Follow the instructions I've already provided in this thread. You'll either need Odin to flash the gingerbread bootloaders,
or to go back to a froyo firmware, first flash a froyo kernel with Odin and THEN the froyo ROM. stock isn't needed.
Recovery in a gingerbread kernel is completely inaccessible with froyo bootloaders.
studacris said:
All that backing up and restoring you did with ROM manager can be done in cwm recovery and that's what you should use from now on. No app needed at all.
Follow the instructions I've already provided in this thread. You'll either need Odin to flash the gingerbread bootloaders,
or to go back to a froyo firmware, first flash a froyo kernel with Odin and THEN the froyo ROM. stock isn't needed.
Recovery in a gingerbread kernel is completely inaccessible with froyo bootloaders.
Click to expand...
Click to collapse
Thank you for the info!
Looks like fasty III is a GB based mod after all...I guess I should read up more on the rom before installing lol....I did not expect the dev to go from froyo to gb -_-
I was thinking of using your previous post for the one click gb bootloaders only....but it seems a little iffy and I can't afford to hardware brick the phone lol...
Makes me wonder tho...is it really THAT risky to flash bootloaders? It would make things simpler if i could just flash the gb bootloaders and go from there....
the whole flash should take less than a minute, where the actual writing takes only a few seconds...but if you were to lose communication in that awful window then it would be bad day.
But that is a small window, and if you have never had connection issues you should be ok if Odin tends to be iffy, you van try heimdall I've heard that works better for some.
Still haven't tried flashing the bootloaders because i'm scared of the possibility of hard bricking my phone... If worst case scenario was to happen and it gets hard bricked....are there any options to restore that phone? or is it just paper weight after?
Also until I flash those bootloaders there is no way to back up my phone or anything?
Thanks for all ur help btw!
another issue i am having is that the phone seems pretty laggy after installing this rom...even with tegra overclock premium and tweaking it up to 1252mhz 1275mv 1100mv setting...it still seems laggy when opening sms etc....is this just the results of a bad rom install? also battery life seems crappy....even after doing the battery recalibration...of course i couldn't wipe the battery stats since i cant get into recovery...
Hard bricks are recoverable by a hardware modification known as unbrickable mod, search for user Adam outler, or go to mobiletechvideos.com they both offer this service if you're not a soldering expert.
Battery recalibration does NOTHING the stats are reset everytime you charge to 100, and besides that they don't calculate your current battery level, just what's been using it, its what's used in settings> about phone> battery use. It has nothing to do with extending battery life.
oh lol...i have been reading all these threads where people are talking about how much their battery life improved after they did the recalibration and stat wipe ....well anyways I am going to attempt the bootloader flashing...I hope everything goes well! after that I want to try reflashing the fasty III ROM...
Do you have any recommendations as far as a good ROM for teh captivate? One that doesn't lag and has good gps & battery life? I would appreciate any help you can give.
Thanks!
I used AdamOutler 's guide to root and put a custom ROM on Captivate 2.2 found here:
http://forum.xda-developers.com/showthread.php?t=1012769
And everything went swiftly. AT THIS POINT, I MADE A NANDROID BACKUP
I then wanted to step up to an Ice Cream Sandwich ROM, which was the main purpose of my rooting in the first place. So, I downloaded the ROM found in this forum, as it is the most popular amongst the forums, so to seem. I found it here:
http://forum.xda-developers.com/showthread.php?t=1363760
Well I downloaded the ROM straight from my phone on the browser, then put it on the Root of my internal memory.
I booted into recovery, Factory Reset/Wipe Cache Partition/Wipe Dalvik Cache.
Went to install .zip from SD card, then clicked on install the ICS ROM.
Began to seem as if it was updating, then the phone shut off, started bootlooping.
No big deal I thought, just boot into recovery, right? I booted into recovery. It went from the Red CWM that i had seen before, to a Blue one.
I selected my nandroid backup, and it gave me all sorts of errors.
Got to the point where CWM was acting as if it could even find where it was supposed to work from?
Now I have the Phone>!<Computer on the black screen when I try to turn on.
Anyone else ever had this problem, or could someone tell me what went wrong? Not in a huge rush as this is just my development phone, but do I need to go ahead and use the Odin3 One Click to do a full complete restore or is there any way of saving what I had?
Thanks guys, God Bless.
LOL OOPS thought i was in the dev section.... ignore..help below.
xCaptivateRx said:
I used AdamOutler 's guide to root and put a custom ROM on Captivate 2.2 found here:
http://forum.xda-developers.com/showthread.php?t=1012769
And everything went swiftly. AT THIS POINT, I MADE A NANDROID BACKUP
I then wanted to step up to an Ice Cream Sandwich ROM, which was the main purpose of my rooting in the first place. So, I downloaded the ROM found in this forum, as it is the most popular amongst the forums, so to seem. I found it here:
http://forum.xda-developers.com/showthread.php?t=1363760
Well I downloaded the ROM straight from my phone on the browser, then put it on the Root of my internal memory.
I booted into recovery, Factory Reset/Wipe Cache Partition/Wipe Dalvik Cache.
Went to install .zip from SD card, then clicked on install the ICS ROM.
Began to seem as if it was updating, then the phone shut off, started bootlooping.
No big deal I thought, just boot into recovery, right? I booted into recovery. It went from the Red CWM that i had seen before, to a Blue one.
I selected my nandroid backup, and it gave me all sorts of errors.
Got to the point where CWM was acting as if it could even find where it was supposed to work from?
Now I have the Phone>!<Computer on the black screen when I try to turn on.
Anyone else ever had this problem, or could someone tell me what went wrong? Not in a huge rush as this is just my development phone, but do I need to go ahead and use the Odin3 One Click to do a full complete restore or is there any way of saving what I had?
Thanks guys, God Bless.
Click to expand...
Click to collapse
Different kernels have different colour recoveries. kernels change with rom.
Different CWM version recoveries are incompatible.
Almost anyone that has flashed a samsung galaxy phone has seen that screen, and it is correctly written " Phone /!\ PC " (you can choose to underline the /!\ if you want to be fancy). it is called the "soft brick screen" hint hint.. go search.
yes
yes. restore with same kernel you used to back it up.
TRusselo said:
Different kernels have different colour recoveries. kernels change with rom.
Different CWM version recoveries are incompatible.
Almost anyone that has flashed a samsung galaxy phone has seen that screen, and it is correctly written " Phone /!\ PC " (you can choose to underline the /!\ if you want to be fancy). it is called the "soft brick screen" hint hint.. go search.
yes
yes. restore with same kernel you used to back it up.
Click to expand...
Click to collapse
Very good responce...however after odin3 one clicking back to stock 2.1 eclair, I lost my clockwork mod folder that was on the internal SD, of course. Rookie mistake, I should've definately copied it on to the external SD card. Thanks for informing me of proper terminology. Also, after downloading rom manager and flashing, booting recovery, I can only access cwm through the rom manager, the three button fix doesn't work.
Why was this moved? I posted in general..
because you have a question/problem
rom manager is only used with 2.1 (for captivate). doesnt work on 2.2 or 2.3.X or 4.0.X
in all newer versions of android we "bake" cwm into the custom kernels we package into the custom roms. so there is no stock recovery and you dont need the update.zip.
dunno why you would flash all the way back to 2.1... EWWW.
in the dev section there is a sticky called odin master collection. use a newer stock rom. the master collection also has stocks versions, pre-packcaged with a custom cwm kernel so you can skip a step of getting it after going back to stock.
Do we know why this happened in the first place? Incompatible kernel? Is there a guide somewhere for moving from GB to ICS?
Sent from my SGH-I897 using XDA App
I thought you had to have GB bootloaders before you flashed any ICS roms ? I know I've read that ,then again I've read 10,000 threats and sometimes it becomes mind numbing.
Do you not have to flash back to 2.1 after having these problems? Right now my phone is at the soft brick screen, no button combo working. Not recognized by the computer either. I'm heading out to radio shack and make a USB jig in a bit. I'd love to just flash straight up to a gingerbread ROM if I can possibly get this thing in download mode. Anybody help a brotha out!
Edit: the sim is not activated, I just run it off Wi-Fi because big red is my carrier. This is my development phone. So I can't just KIES update to whatever the newest is.
Sent from my DROID X2 using XDA App
Any firmware should work, no need to go all the way to eclair...just flash gingerbread.
Don't think its been mentioned yet but when going from 2.2 to ICS, you have to flash the rom twice to get out of the bootloops. Sounds like you were at that point but when you flashed your nandroid instead of the ICS rom again, your phone must not have liked it.
aww.W.T.F? said:
I thought you had to have GB bootloaders before you flashed any ICS roms ? I know I've read that ,then again I've read 10,000 threats and sometimes it becomes mind numbing.
Click to expand...
Click to collapse
Not all ICS ROM's require GB bootloaders. I ran THS, and am now on vibranturk's AOKP and I came straight from 2.1
I think the issue was you're supposed to flash them twice. Well that fixed it for me. I dkbhave the gingerbread boot loaders now though
Sent from my SGH-I897 using xda premium
I went from bone stock Froyo 2.2 straight to THS ICS with no problems whatsoever. So some ICS Roms doesn't need GB bootloaders.
Sent from my SGH-I897 using xda premium
I'm on the same situation as the original poster: I'm on andromeda3 and now I want to upgrade to ICS. Right now my captivate has cwm 2.5.1.2 can I flash any ICS mod from there or do I need to do something else?
See this.... TRusselo's "Guide..." that is a Stickied Thread in the Q & A Forum.
I believe u will need the Gingerbread Bootloaders...
Sent from my SAMSUNG-SGH-I777 using xda premium