[Q] Official Vodafone 2.3.3 issues reboot loop after rooting - Galaxy S I9000 Q&A, Help & Troubleshooting

Hello All,
I am hoping someone can give me some advice here is my situation.
I was running the official Vodafone 2.2
Yesterday after a long wait they released 2.3.3 so I used KIES to upgrade to this no problems.
Later I decide to root the phone so I can use Titanium backup to restore all my files settings etc.
I used a rooting method flashing with ODIN and the put my phone in to endless reboot loops.
I cleared the cache in the recovery mode and then erased the data partition with no change.
I needed to get the phone going so I flashed 2.3.4 XXJVQ with ODIN and it is working.
I want to go back to the official Vodafone version of 2.3.3 but I can't seem to work out how.
Can anyone please give me some info on how I might do this.
I assume if I could get the official 2.2 vodafone back on the phone the I could use KIES to push the new 2.3.3 but I just cant find that for download any where.
Thanks in advance
Chris

Related

[Q] Galaxy S software screwed up. How to restore the stock?

Hello,
i've got a serious problem with my galaxy S.
Recently i updated my software of my SGS to 2.2.1 with kies. I was happy for a little while but then i saw darky's rom and i wanted also the Gingerbread look on my phone. I rooted my 2.2.1 using Odin and i installed Clockwork recovery Mod or something like it. After that i flashed Darky's rom on my phone.
It all worked perfectly. But then Yesterday suddenly when i tried to call home my phone wasnt working like it should. And it wouldnt call anybody.
So at home i searched up a stock firmware from samfirmware .com And i flashed it.
Now my phone is all **** because the software force closes and kies doenst work any more. I think i may should have first deinstalled Clockwork mod and unroot?
The only thing i want is to get back to 2.2 or 2.1 Im running vodafone and im from holland don't know if that makes a difference?
Anyways i really hope someone on this forum can help me please.
I just need the stock firmware and everything else like CWM and root of my phone although i cant see superusers anymore in my menu so i think its off?
first of all boot into recovery. do a factory reset/ wipe the cache and also try to format the internal sd card.
secondly boot into download mode and try to flash your stock rom again, do not use re-partition or pit unless you have 3 files (pda, modem, csc), if that completes, let me know what happens after the flash... or PM me if you want to.
Just to add, if you have these problems, you should flash with repartition to make sure that everything will be fixed, but as azzledazzle said, you need all the 3 files to do that.
you knw what a problem is i think ..that i'm not sure im using the right rom to flash with? could you maybe tell me what file i need to flash with? what is the stock for my phone and how can i see it?
http://forum.xda-developers.com/showthread.php?t=846913 this has all the stock firmwares you need. im not sure which ones come in 3 files. ideally you will be wanting one that also has dbdata... if you cant find it i would suggest flashing darkyys new 9.2
you can flash that thru odin, you can use 512 pit even tho it only has 1 pda file. and it also contains dbdata which will restore the old one incase of corruption or deletion (happened to me yesterday)
when i try to format the sd it says .
E:can't mound /dev/block/mmcblk0p1
(device or resource busy)
E:copy_dbdata_media: can't mount SDCARD:
do i need to do anything about this? is it bad?
i would try and flash a rom with dbdata if that doesnt work you could try this http://forum.xda-developers.com/showthread.php?t=905975 or this http://forum.xda-developers.com/showthread.php?t=563298
if that doesnt work i think it may need to go back to samsung i suspect it could be a corrupt sd card... (but i may be wrong)
yes yes YESSS i think it worked really thanks man for the fast help etc. now it boots i flashed it and there are no weird apps or force closes...Only one question left if i want to just root 2.2.1 is there an easy app for it? or do u have a file to just root stock with odin?
airdude13 said:
Hello,
i've got a serious problem with my galaxy S.
Recently i updated my software of my SGS to 2.2.1 with kies. I was happy for a little while but then i saw darky's rom and i wanted also the Gingerbread look on my phone. I rooted my 2.2.1 using Odin and i installed Clockwork recovery Mod or something like it. After that i flashed Darky's rom on my phone.
It all worked perfectly. But then Yesterday suddenly when i tried to call home my phone wasnt working like it should. And it wouldnt call anybody.
So at home i searched up a stock firmware from samfirmware .com And i flashed it.
Now my phone is all **** because the software force closes and kies doenst work any more. I think i may should have first deinstalled Clockwork mod and unroot?
The only thing i want is to get back to 2.2 or 2.1 Im running vodafone and im from holland don't know if that makes a difference?
Anyways i really hope someone on this forum can help me please.
I just need the stock firmware and everything else like CWM and root of my phone although i cant see superusers anymore in my menu so i think its off?
Click to expand...
Click to collapse
It's funny.. I did the exact same thing yesterday, and the same result happened to me. Now I'm dealing with how to unbrick my phone.
easiest way is to flash speedmod kernel thru odin, that gives you root and lagfix (if desired) also some extra tweaks to speed up the phone.
PS: Dont forget the thanks button ---------------------------------------------->>>>>
well maybe this can be some use to u it worked for me i guess only prob is i cannot connect to kies but that's just finding the right firmware
damn man it still is not the right firmware how can i see what firmware i need? the one i got now kies still says it cant update
damn man i still dont have the right firmware how can i see what firmware i need for my phone? its a dutch vodafone branded phone i want 2.2
http://forum.xda-developers.com/showthread.php?t=846913
select the firmware you want from there. dont listen to what kies tells you.

Storage not prepared error on SC-02B (docomo)

Hello all,
My phone is an SC-02b (Japanese Docomo version of the I9000)
First off a little history...
I originally purchased the phone here in Tokyo and it was Froyo 2.2.1 build. I used superoneclick root from here on XDA to root the phone and everything worked great
I wanted to try out Darkys Rom so I flashed it with ODIN. Everything was ok with the new Rom except there was no internet connection at all. I did a bit of checking and found out that the Modems are different on my SC-02B the other I9000 versions.
In order to change the Modem I tried flashing Darkys again with the original stock modem (found it here... http://forum.xda-developers.com/showthread.php?p=11614716) This resulted in Odin crashing and I had no choice but to unplug the phone from Odin in the middle of the process.
Stupidly I did not make a backup of my original phone so I used the original firmware above and flashed it back, now my phone is Froyo 2.2
Everything works ok but when I enter recovery mode I get the following error...
E:Can't mount /dev/block/mmcblk0p3
(No such file or directory)
E:install_applications_for_customer: Can't mount H
IDDENSDCARD
your storage not prepared yet, please use UI menu for format and reboot actions.
copy application failed.
I used Samsung KIES to upgrade the phone to Froyo 2.2.1 but now Superoneclickroot doesn't work anymore, the program simply stops responding at waiting for device (tried all the fixes in the forum threads and in recovery but nothing works so I'm assuming it is because of the error above)
For now I simply went back to the original Froyo 2.2 and rooted with Z4 Root but I would really like to fix the problem and be able to have a rooted phone with Froyo 2.2.1
Any ideas on how to fix this?
Bump... hopefully someone knows how to fix this?
The SC-02B doesn't seem to like custom kernels and roms
I rooted mine on 2.2.1 with superoneclick. My only issue was my AV software was stripping parts of the app so it would not work. I had to disable my AV software and then download and run it. After that it ran perfect.
Thanks very much for the reply.
Thankfully the issue has been resolved... it seems as though when I flashed the initial Rom it screwed up the drives for my phone so I had to go into device manager, uninstall everything and then install the correct drives manually.
Thankfully the issue has been resolved... it seems as though when I flashed the initial Rom it screwed up the drives for my phone so I had to go into device manager, uninstall everything and then install the correct drives manually.
I am getting this same message how exactly did you fix this?
same here..im getting this message..how did you fix this?

[Q] A way to backup whole stock rom

Hi guys, im new to the sgs, but got some android experience. I was wondering if i can backup the whole ROM/system from my sgs (running 2.2.1 but its kinda branded from my carrier), so that i can flash the latest 2.3.3 or even 2.3.4 with odin and if for any reason i have to take it into warranty, i can reflash (preferably with odin) the stock branded rom that came with my phone. I would really appreciate, if anyone can tell me that, i searched around but couldnt really find this specific question. ive checked the stock ROM thread, and my version is there but im not sure its the branded one, cuz mine says 2011.02 and the one there says december 2010.
As long as you are rooted and have clockwork mod installed you can do a nandroid backup from the recovery menu I believe.
To restore you would have to flash the same base rom though, i.e. any 2.2.1 ROM then let it reboot then root it boot into recovery and restore nandroid backup.
I think that should work.
I'm sure someone wil correct me if I am wrong.
I wish I had done this when I bought by phone from Orange UK branded.
If you find out how to create an odin version please post here for others too.
ok thanks, i flashed the newer version over anyways.. thanks anyways
Is this correct?
Is this correct?
I have the same issue and after having mine sent into samsung for a successful repair (with a bunch of arguing and persuasion) I would like to back up this stock rom before continuing in order to avoid that situation again.
Mines a i9000M (bell version )
You always have to hack the ROM a bit to have a backup. Either you flash a custom kernel that'll give you CWM/nandroid backup or you root the ROM so you can do some adb magic.
There are also tons of stock ROMs floating around the interwebs, so with any luck you can find your own stock there.

[Q] Need root only for backup

Hello to all,
can anyone please advise, which file should i install that would suit my firmware best !
Model number:GT-I9000
Firmware version: 2.3.3
Baseband version: I9000XXJVO
Kernel version: 2.6.35.7-I9000BOJV8-CL273008 root DELL154 #2
Build number: GINGERBREAD.BOJV8
I really appreciate if anyone could help me.
Thanks to all
Try the CF-Root kernel.
Sent from hell to take your soul
Thank you, Lunchbox for your fast reply !
But there are many CF-Root-Kernels.
Which one is the right ?
Sorry, but I am a newbie in Kernel-choice....
if you cant be bothered flashing kernels etc here is the the superoneclick method...
http://www.youtube.com/watch?v=SuaXu8kusvA
just follow that and you will be rooted, then get titanium backup and do a batch backup
Use CF-Root for the JPO firmaware you have. Each kernel has the firmware extension at the end of its file name.
Sent from my GT-I9000 using XDA Premium App
Superoneclick I have testet, but without success .
Does kernel JPO really fit my kernel JV8 ??
Same problem here.
After updating a t-mobile branded I9000 to 2.3.3 via KIES (including wipe) my programs and settings are gone.
All data has been saved in TitanBackup. Unfortunatly TB needs root.
SOC didn't work, now I'm looking for alternatives.
Heard, that cf-root can fix my prob, but still got following questions:
will cf-root work on my branded galaxy?
which cf-root version do I need?
Screeningsleeper
Is there no solution available ?
As far as I know it is possible to root the Galaxy with the FuguRoot.
One thing that is still missing is the correct Odin flashable stock kernel.
Till now there is no kernel for the I9000BOJV8 available at Samfirmware.
I'll keep looking for the kernel.
Hoping to get a quick solution.
Screeningsleeper
Did anyone have new ideas for rooting the T-Mobile Gingerbread?
After long time of searching the web I still found nothing relevant.
Screeningsleeper
Push
Nobody a solution for rooting phone without flashing the ROM for T-Mobile branded PV8 gingerbread?
Same problem here, still waiting .
A week ago I flashed my. T-Mobile with. 2.3
5 JVS and rooted it. Now all is running well.
Yesterday, with the help of this thread :http://forum.xda-developers.com/showthread.php?t=1139050, I manage to turn my 6h eating battery brick, into a real rooted phone, thank you guys!
Screeningsleeper said:
Same problem here.
After updating a t-mobile branded I9000 to 2.3.3 via KIES (including wipe) my programs and settings are gone.
All data has been saved in TitanBackup. Unfortunatly TB needs root.
SOC didn't work, now I'm looking for alternatives.
Heard, that cf-root can fix my prob, but still got following questions:
will cf-root work on my branded galaxy?
which cf-root version do I need?
Screeningsleeper
Click to expand...
Click to collapse
I also upgraded FW from 2.2 to 2.3.3 via kies last week and lost my root - but flashed this to my phone and got root back. link to where to get it:
Originally Posted by haloimplant
I tarred it up, not sure if that is necessary. (First time using megaupload hopefully it works)
Rooted KG3 kernel: http://www.megaupload.com/?d=410SOQHD or http://www.megaupload.com/?d=8DH9UR4L (first one comes up unavailable sometimes?)
Odin 1.82: http://www.megaupload.com/?d=1IKLKDPB
Just open Odin, put the tar file as PDA, put the phone in download mode, plug it in, wait for the box under ID:COM to go yellow and the 'added!' message and hit start. It will be done in a few seconds. Install superuser and busybox from the market to see if it works.
Like I said earlier it didn't work right away for me, superuser just FC'd on the first boot. Not sure if it was reflashing or rebooting that fixed it. Just a warning that some tinkering might be required.
OK, Problem solved.
Using the Easy rooting toolkit created by DooMLoRD from here.
Works like a charm for my Galaxy I9000 (PDA I9000BOJV8, Phone I9000XXJVO, CSC I9000GDTMJV7) wih german T-Mobile branding.
Rooting took 3 Minutes, no Problems with this.
Need root only for backup
Hello xda-developers.com
I need some help according to this title "Need root only for backup" I hope I am here correctly.
My problem is:
The Phone turns automatically off without doing anything.
I started it but it get's in a loading loop.
I don't want to make a reset until I backup the data from my phone contacts, pictures etc...
I read in an other forum that it is posible to flash only the kernel via ODIN CF-ROOT_....
to activate some mounts & storage - usb in recovery. So the PC can use the phone as USB device to copy all data from the phone to the PC. Is this correct?
If yes i will need the correct CF-ROOT for this version below i tryed to find the CF-ROOT for this version but I did not find it for my version. Can you help me please?
My phone can load the download mode.
Model
GT-I9000
firmware-Version
2.2
Basisbandversion
I9000XXJPK
Kernel-Version
2.6.32.9
[email protected] #1
Buildnummer
FROYO.BGJP3
If not which other possibilities do i have to Backup the data from the phone to my Pc?
I need the data the contacts and the rest of the files because its my business phone and i don't have the acctual backup of the phone
After I've saved my data I will flash the phone to one of the newest versions.
I hope that someone can help me with this problem :S
thanking you in anticipation!
BR
dragon2030
You can use this CF-ROOT,took here on XDA!
http://forum.xda-developers.com/attachment.php?attachmentid=408539&d=1285618588
Nezys said:
You can use this CF-ROOT,took here on XDA!
http://forum.xda-developers.com/attachment.php?attachmentid=408539&d=1285618588
Click to expand...
Click to collapse
THANKS A LOT!!
The version *-v1.1* doesn't matter?
what means v1.1, Froyo v1.1?
USB storage in recovery mode not listed
Hello
I flashed the Kernel with CF-Root-JPK-v1.1 but i can not activate the USB storage in recovery mode. It's not listed.
Is this not possible or why is this not listed?
If backup my data in this way is not possible.
How can I backup my data from the Phone when the Phone is in a boot loop? :S
Br
dragon2030

Problem with my Bell i9000M (Needs serious help)

Hi XDA developers,
I'm a newbie. I've been searching posts on xda and still couldn't remedied the problem. I currently have the i9000m from Bell Canada. I upgraded my i9000m to 2.3.3 Gingerbread earlier in Kies. Recently, I've been trying to unlock my phone and without rooting, the best solution seems to be going back to Eclair, so I followed the youtube tutorial by djeddieone and tried to go back to Eclair using Odie. It basically flashes a rom (I suspect that's a T-mobile rom that shouldn't be flashed onto my phone) in Odin. My phone no longer boots and cannot get into recovery mode. (When I try to start the phone, there are random colour dots showing on the screen.) The only mode that works seems to be downloading mode. I think I need to flash a stock rom from bell, but the link on sammobile (i9000ugjk3) seems to be expired and cannot be downloaded. So i'm trying to find alternative ways to see how to remedy this problem.
Thanks in advance.
I highly doubt that Bell will release a new update for the i9000m. You are better finding a newer rom (JVT or newer) and flashing that via Odin. Im using CM9 nightlies (but I feel it has too many bugs for daily use). If you can find a newer rom that is tweaked, you should notice better battery, faster, etc.
Just my $0.02
Hey I had similar issue - tried flashing new firmware w/odin & stuck with download only... I finally went to a Bell store to send it in, but they were able to use new firmware recovery software to re-flash stock gb2.3.3! I just said Kies messed-up the phone... Anyway, it will get you back to stock functionality. Good luck!
Sent from my GT-I9000M
vassosman said:
I highly doubt that Bell will release a new update for the i9000m. You are better finding a newer rom (JVT or newer) and flashing that via Odin. Im using CM9 nightlies (but I feel it has too many bugs for daily use). If you can find a newer rom that is tweaked, you should notice better battery, faster, etc.
Just my $0.02
Click to expand...
Click to collapse
I have not found any bugs since I update to the latest update-cm-9-20120425-NIGHTLY-galaxysmtd-signed.zip
bioniceric said:
The only mode that works seems to be downloading mode. I think I need to flash a stock rom from bell, but the link on sammobile (i9000ugjk3) seems to be expired and cannot be downloaded. So i'm trying to find alternative ways to see how to remedy this problem.
Click to expand...
Click to collapse
Since you can still get into download mode, you're OK.
You can download the UGKG3 ROM files from this thread:
http://forum.xda-developers.com/showthread.php?t=1102881
Search for UGKG3.
The file is in 7Zip format. If you don't have something to unpack it, get IZArc.
Flash the 3 files and you should be up and running.
bioniceric said:
Hi XDA developers,
I'm a newbie. I've been searching posts on xda and still couldn't remedied the problem. I currently have the i9000m from Bell Canada. I upgraded my i9000m to 2.3.3 Gingerbread earlier in Kies. Recently, I've been trying to unlock my phone and without rooting, the best solution seems to be going back to Eclair, so I followed the youtube tutorial by djeddieone and tried to go back to Eclair using Odie. It basically flashes a rom (I suspect that's a T-mobile rom that shouldn't be flashed onto my phone) in Odin. My phone no longer boots and cannot get into recovery mode. (When I try to start the phone, there are random colour dots showing on the screen.) The only mode that works seems to be downloading mode. I think I need to flash a stock rom from bell, but the link on sammobile (i9000ugjk3) seems to be expired and cannot be downloaded. So i'm trying to find alternative ways to see how to remedy this problem.
Thanks in advance.
Click to expand...
Click to collapse
After you restore your phone to KG3 via Odin/Download mode per Black Rose's link earlier in this thread, you should be back where you started on KG3.
Then from KG3 ( 2.3.3),
I suggest:
1) Use SuperOneClick to root your phone (SuperOneClick can also UNroot your phone later if you want).
2) Use Galaxy_S Unlock by Helroz available on the G-store.
This worked well for me with no problems.
And just for reassurance, NEVER flash a ROM that is not explicitly for the i9000/i9000M to this device.

Categories

Resources