i have SGS with miui galnet and i got usb device not recognized!!!!!!!!!!!!!!!!
i have windows 7 64 bit
i try everything !!
install kies , install drivers sgs 64 bit , install drivers nexus s 32 and 64 bit , install sdk
and still usb device not recognized !!!!!!
pls pls help i want stock to flash darky !!!
Hi,
Uninstall Kies. Reboot PC.
Install these 64 bits drivers (middle of the post) :
http://www.theandroidsoul.com/ezbase-ezrom-for-android-2-2-install-revert-back/
Reboot PC.
And try another cable or USB port!!!
i not need kies for odin?
Beuuuuuuhhhhh...
In one word: NO.
Odin don't need Kies and let me tell you: you don't need Kies
odin - usb device not recpgnized
what i need to do?
install android sdk..install the package google usb driver
its not work
its not work
its not work
its not work
its not work
its not work
its not work
its not work
i buy today a new cable
and suprise
its not work
HeLPhELPHELP
If I remember correctly, you need the Nexus S drivers. Google for it.
Settings-Network-USB Settings-Mass storage on
and
Settings-App-Dev-USB debug on
Decide
DEBUG OFF or ON?
sabag123 said:
Decide
DEBUG OFF or ON?
Click to expand...
Click to collapse
My english is so poor?
[Citation on]
Settings-App-Dev-USB debug on
[Citation off]
not work
still unkown device
after i install sdk what i need to do?
Run it and install the driver package.
knowledge is Power. Guard it well.
not work
and i try to connect other samsung device
(samsung motne)
and still not recognized
its not work!!
i try to connect other samsung device and still unkown device !!
help
It MUST work - I don't have any any problems and thousands of people too. Did you run the SDK at least once and installed the driver package(s)?
yes !!!!!!!!!!!!!!!!!
maybe need other kernel?
Related
hello i found this forum great for mod my samsung galaxy s here i found a lot of thinks.
but here is my problem i have already install the samsung kies and android sdk, but when i trie to update my phone with kies the process run normally until it come the time that kies put the phone in download mode, there i receive a messege on the windows task bar like i have disconnected the phone and then it says that "error unknow device" and the upgrade on kies cant go on.
any help plz thanks
i have a att galaxy s rooted
windows 7 32bit
latest version of kies
First thing to try is test each of the different usb ports on your computer - if you get the same error on each port then my first instinct would be to reinstall the samsung drivers for your computer.
If you try reinstalling the drivers below is a link to the drivers that have worked the best for me.
http://www.mediafire.com/?0b45zo7o75rc5d5 - samsung captivate windows 32 bit drivers
thanks for your replay. i already have uninstall the drivers and reinstall them with no success, but i will try to test it in other usb port and report later
this is soo bad i have try both of you recomendations and still says usb device not recognize. then it says no driver was install and when i click that it says on the driver part that windows have stop the device for a error code 43.
i have search a lot and i havent find anything close to my problem can anyone else give recomendations on this or tell me if you know something similar to this happend to other users.
ps - i also try on a win xp 32 with the same result
I was able to use adb on my Windows 7 x64 Home edition prior to rooting
After using z4root to root my Galaxy S - I9000 running Froyo
no matter what i tried , i was always unsuccessful
I unrooted using z4root and tried it but it didnt work..
Rooted it again didnt work
Thought may be to delete the device in device manager and then reinstall it using the drivers provided by Android sdk and NOT the windows update one...
Followed many others steps by various blogs and i know i am not doing it incorrectly but still it doesnt work...
I have tried to put everything in an image ,an expert mite need to understand my problem
If you are not able to see the image properly try this:
imageshack.us/photo/my-images/856/galaxysu.jpg/
Did you make sure that in your SGS, Settings/Applications/Development the USB debugging mode is ticked?
Have you tried to reinstall Kies (to install / reinstall necessary drivers)?
stiwipl said:
Did you make sure that in your SGS, Settings/Applications/Development the USB debugging mode is ticked?
Have you tried to reinstall Kies (to install / reinstall necessary drivers)?
Click to expand...
Click to collapse
What i did was deleted everything under Universal Serial Bus Controllers, uninstalled Kies and drivers of Samsung and restarted my box. and installed Kies again, set usb debugging again and connected it and Voila ! It works flawlessly now
Thanks a lot for your advice. Was getting mad after following so many posts on the internet. Finally everything is working fine now...
my galaxy tab p1000 not recognized in download mode when im using odin...
can anybody help me iwant to reflash my tab...
Did you try to flash it anyway? Just keep trying. Good idea to be fully charged too.
Sent from my GT-P1000 using XDA
boss ill try it a couple times but cant read my device i want to reflash my tab is bricked....uhuhuh
many has done it.
As long as you can go to download mode, you are not bricked.
remember to have it charged for at least 4hrs.
Just connect it to Odin preferably at the same USB port as the one you used before.
Reboot it to download mode while data cable is connected, then try Odin.
Connecting in Download Mode
I had the same problem when i changed laptop. So on my new machine, the PC would not recognize my P1000 in the download mode. I was running win xp.
The problem was that it wasn't able to automatically locate the drivers. No wonder it wasn't. The drivers aren't built in to xp driver cache. So here is what you need to do:
Download Samsun Kies from samsung website. Do a search on google and you'll get to it.
Once downloaded, install Samsung Kies. No need to run it or anything. Once downloaded, plug that tab in download mode to USB of PC, and it will get detected and the drivers will get installed.
I still have KIES installed, but i never used it, i just installed it for the drivers.
Let me know if this helped.
Samsung Galaxy Tab Driver
obahmood said:
I had the same problem when i changed laptop. So on my new machine, the PC would not recognize my P1000 in the download mode. I was running win xp.
The problem was that it wasn't able to automatically locate the drivers. No wonder it wasn't. The drivers aren't built in to xp driver cache. So here is what you need to do:
Download Samsun Kies from samsung website. Do a search on google and you'll get to it.
Once downloaded, install Samsung Kies. No need to run it or anything. Once downloaded, plug that tab in download mode to USB of PC, and it will get detected and the drivers will get installed.
I still have KIES installed, but i never used it, i just installed it for the drivers.
Let me know if this helped.
Click to expand...
Click to collapse
Hi Dude,
Instead of installing Kies on your XP or windonws 7 for only driver, you can install driver using below guide.
Go to Google and search as Galaxy Tab Driver and go...Click Modaco Website & then Download.
Regards,
Venkat
Overcome's GB-stock-safe-v5 zip package contains USB drivers too, both 32bit and 64bit.
But the best is of course in linux, just a single line of definition in udev.
same here - SOLVED
I had the same problem (not recognized).. What I did to resolve the problem by:
1. Re-install Samsung USB drivers (got from here --> http://forum.xda-developers.com/showthread.php?t=1881981)
2. Set the tab in DL mode and connect to the PC... wait for windows to install drivers.... DONE!
3. Startd Odin_v1.83.. CONNECTED!!! (seen by yellow COM#)
Hope this helps.. HIT THANKS PLS!
i got samsung s3 mini GT - I8190 made in korea the problem is download mode dont work even odin cant detect it when i plug it on usb i realy want to root it and install CWN please help me how to root it
baseband I8190XXAMA2
Did u have USB debugging on? Im not sure if that will do but its worth a shot.
Sent from my CM10.1 SGH-T599
Yes its on..!!
Sent from my IM-A760S using xda app-developers app
Usb debug doesn't matter in download mode.
Use original cable, usb on the back of the computer. If you're on laptop just try another usb.
Make sure you got samsung usb drivers installed. If you got kies installed, make sure you kill all process with kies in taskmanager before you open odin.
Put phone in download mode, connect to computer, open odin.
Otherwise you can check out the one-click-root in general section, then download rommanager to put cwm in your phone.
Good luck.
sometimes the samsung drivers cause problems.
Use THIS.
Good luck
[ This is only a hint and not a question! ]
I had the same problem with Windows 8.1 x64.
Different driver, Administator rights and much more didn't help.
With Windows 7 x64 odin work perfect. :good:
Hy all,
My phone it s booting only in recovery mode and that is a black screen and i can t do anything and my pc also can t see the device ... how can i fix this problem ? I can only enter in download mode ...but if my device is not recognized my posibilities are limitated or 0 !
I unnistalled kies and all samsung usb driver and installed again samsung usb driver and my pc see the device but don t recognize the drivers. i can t use odin also.
Pls help !
Cocutzul said:
Hy all,
My phone it s booting only in recovery mode and that is a black screen and i can t do anything and my pc also can t see the device ... how can i fix this problem ? I can only enter in download mode ...but if my device is not recognized my posibilities are limitated or 0 !
I unnistalled kies and all samsung usb driver and installed again samsung usb driver and my pc see the device but don t recognize the drivers. i can t use odin also.
Pls help !
Click to expand...
Click to collapse
Try to use different usb port on pc. To pull out, push in cable in usb port while phone is in download mode and Odin is started. Try another usb cable.
P.S. what did you do that you got non booting system?
Sent from my GT-I9070 using Tapatalk
Flashing cm 10.2.. I ve changed the cable, the usb ports...same sitation...my pc see an unknown device and install the drivers 1.5.27.00 and that s all
Cocutzul said:
Flashing cm 10.2.. I ve changed the cable, the usb ports...same sitation...my pc see an unknown device and install the drivers 1.5.27.00 and that s all
Click to expand...
Click to collapse
Is recognised by Odin?
If it is, then reflash stock!
highmage said:
Is recognised by Odin?
If it is, then reflash stock!
Click to expand...
Click to collapse
Nop
Cocutzul said:
Nop
Click to expand...
Click to collapse
Why didn't you read CM 10.2 thread? It is written that it has black screen on recovery.
Try with Odin again, try to pull and put back usb cable. You have Windows 7? Does it show new hardware at all?
You have used Odin before? If not look for some guide on youtube. Maybe you miss something.
Try with ODIN v1.85 and ODIN v3.xx
Do you have any PC activity when you get to Recovery? I read that it just has black screen, but it is functional. Maybe ADB shell is working, so you can flash CoCore over it.
You can try to install this on PC: http://forum.xda-developers.com/showthread.php?t=2105707
There you have adb shell, and with some commands you can install kernel. After that you can reboot to Recovery again and you will have working Recovery (but still non booting system). Next step is to download some JB stock based ROM and to push it to sd card (you can use that Total commnader in link I gave you). After that just install ROM and it should work.
I am at work now, so I can't help you in details.
shut_down said:
Why didn't you read CM 10.2 thread? It is written that it has black screen on recovery.
Try with Odin again, try to pull and put back usb cable. You have Windows 7? Does it show new hardware at all?
You have used Odin before? If not look for some guide on youtube. Maybe you miss something.
Try with ODIN v1.85 and ODIN v3.xx
Click to expand...
Click to collapse
I wanted to flash somthing else ... and for no attention i flashed that! I tried odin 1.85 and 3.04 and 3.07 on win 7,8 and xp sp3 . The device is unkonwn for all of this .
Cocutzul said:
I wanted to flash somthing else ... and for no attention i flashed that! I tried odin 1.85 and 3.04 and 3.07 on win 7,8 and xp sp3 . The device is unkonwn for all of this .
Click to expand...
Click to collapse
Read rest of my post, I change it.
If you can't handle it - find someone that has more knowlage in Android to help you (that can do it for you).
Uninstall Kies if you have reinstalled it and remove any samsung drivers, do a registry clean on Windows with CCleaner (you can find it with Google), reboot pc then install this usb drivers, reboot again and try if now the phone in download mode is recognized on Odin (firstly powen on in download mode then connect to usb)