Hello,
actually don't know why but my galaxy tab doesn't seem to work over usb. It loads through usb like normal.. but it doesnt connect for odin or just as hard drive.
wether in ubuntu(linux) nor OS X or even Windows 7 (tried several pcs and several editions, with and without kies bein installed!)
Any clue if I can flash it through SD without the need of connecting it to a PC ? Or how I can fix the usb problem ?
I guess it came through a "failed flash" but I dont know. I tried to flash it once through ODIN but after that try it didn't work. The TAB itself works like everything else but just the usb connection doesnt!
I think maybe after flashing a new rom it will work again ?
hackint0sh said:
Hello,
actually don't know why but my galaxy tab doesn't seem to work over usb. It loads through usb like normal.. but it doesnt connect for odin or just as hard drive.
Go to menu, settings, wireless and network, go down to usb settings and make sure it is selected as mass storage. I am not sure if you have tried this or not but after I flashed I had no working usb so I went into the usb setting and I had to select mass storage and now it works perfect.
I hope this helps you in any way
Sent From Githrog's Tab
Click to expand...
Click to collapse
OP you will be better served posting this in Q&A section.
Sent from my SPH-D700 using XDA App
Here is the info you should read..
http://forum.xda-developers.com/showthread.php?t=1099036
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
Hello! I have got very strange problem!
I have installed HTC drivers but when im pluging in my htc trought USB 2.0 port it recognize my phone as CD Drive
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But it perfectly works with USB 3.0 ports! Problem is not in the USB 2.0 port because all other USB devices are working good in that port
how to fix this problem?
anyone ?
With the new HTC software, it will show up as a CD drive and a media device. What you need to do is download the drivers for the phone and update manually in the device manager for the portable devices. The CD drive is HTC sync which after you download the drivers, you don't need to worry about it
Sent from my HTC One using Tapatalk 4
MadMax said:
With the new HTC software, it will show up as a CD drive and a media device. What you need to do is download the drivers for the phone and update manually in the device manager for the portable devices. The CD drive is HTC sync which after you download the drivers, you don't need to worry about it
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
actually they are already installed
same here
so did you fix it. it's driving me crazy!!!
charis90 said:
so did you fix it. it's driving me crazy!!!
Click to expand...
Click to collapse
Try deleting the file "PCTOOL.ISO" from /system/etc/ on your phone
So recently I did a stupid and accidentally switched off my OPO during an update installation and completely screwed it all up. I tried switching it back on only to find that it was stuck in a recovery mode loop. I then hit factory reset in a last ditch attempt to save the poor bugger without flashing it and even that didn't work.
I've then had to resort to flashing it using the OPO toolkit software on my PC however when connecting to the PC, my OPO only shows up as an MTP USB Device and nothing else. I have tried installing recommended Samsung drivers for the phone but I wasn't able to as it the "update drivers" button was greyed out on the MTP USB Device properties window.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Basically, the OPO toolkit will not work as no android devices are recognised by the PC even though an android device is showing up in the control panel.
There is no way I can currently access the settings on my phone due to recovery mode loop obviously.
The last thing I want to do here is end up with being forced to use the OnePlus support which I hope most of you understand why.
Thanks for any suggestions!
Hi,
This thread is being moved to your own dedicated forum , where the experts may be able to help you better.
Good luck!
Put it in downloading mode and then use adb to use the toolkit since bow u don't have a os on the OPO happened with me too but I fixed it this way
Sent from my A0001 using Tapatalk
Hi everyone,
Seeking for idea(s) from a genius group.
I got a Nexus 6 with a broken screen ( really bad can't see anything , just black), want to get the data(photos) out of the phone.
the system debugging mode is not enabled, it's running on android 6.0.
here is what i have tried:
plug the phone into PC via USB, PC does not recognize any device, hold on power button and volume down for few seconds, the PC recognize the following: (fastboot shamu S)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
can't post outside link
drive.google.com/file/d/0B3OMYlBbrdD2Ti1WSWpNdUEySjg/view?usp=sharing
/drive.google.com/file/d/0B3OMYlBbrdD2am92bUxWb0xuRkE/view?usp=sharing
not sure what can be done at this point.
also bought a used Nexus 6 in good working condition, swap screen did not work, the screen did not light up. ( some says the screen is locked to the motherboard, not sure about this).
googled some info, the last way would be remove the 32Gb NAND flash from the motherboard by un-soldering , and install to another motherboard, this may require some special tools and don't think it's a home DIY project.
Any shared idea(s) would be really appreciated.
Thanks.
James
hpmarsum said:
...., hold on power button and volume down for few seconds, the PC recognize the following: (fastboot shamu S)
Any shared idea(s) would be really appreciated.
Click to expand...
Click to collapse
http://stackoverflow.com/questions/...pull-all-files-of-a-folder-present-in-sd-card
The system debugging mode is not enable, will try to run the ADB. Thanks.
Anyone else have this problem and how did you fix it.?
JAMRZ69 said:
Anyone else have this problem and how did you fix it.?
Click to expand...
Click to collapse
Use the USB charging cable which came with your note 9. Connect your note 9 to your laptop using this cable. Allow permission. Done. That worked for me!
drivers?
Win 7 to 10 should recognise the device without need of external driver installation...
Anything older than that or Linux, you might need to look on the Samsung site...
It's Windows 10 and for some weird reason nothing happens except that the phone will charge when plugged into the laptop the same laptop I've used for all my galaxy Notes I've had drivers installed on my HP forever just don't get why this Note 9 is any different.
JAMRZ69 said:
It's Windows 10 and for some weird reason nothing happens except that the phone will charge when plugged into the laptop the same laptop I've used for all my galaxy Notes I've had drivers installed on my HP forever just don't get why this Note 9 is any different.
Click to expand...
Click to collapse
Check your USB Configuration in Developer Mode and make sure it's not set to charging.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N960W using XDA-Developers Legacy app
Got it figured out,had to reinstall drivers,reboot and all is good.Thank you all for the info much appreciated.
I have an old Galaxy S3 GT-I9300 device
it got bricked and the charging port is broken .
the recovery will not open and will go back to splash screen
to charge the device i use a battery charger dock
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
how can i flash and unbrick it?
please help...
musicmate said:
As far as you described the circumstances, there is no Option to Unbrick it.
But Why?
Except from the Recovery Mode there is the Download Mode to Flash Software/Tools (e.g. Bootloader, Recovery, ROM):
-> One Option ist to access the I9300 via Download Mode and ADB/Odin, but without a working USB-Port... .
-> Another Option is to access via Wireless-ADB (Network-IP-based ADB), but to activate it, you'll have to get into the ROM's Settings (Developers-Options). Therefore you'll need an working ROM, which didn't seem so... .
-> Last possible Solution: Get in touch with Microelectronics and solder a new Micro USB Port to your Phone.
Otherwise you'll now have new opportunities to use your I9300 as:
Decorative Night Light/ Paperweight/ Doorstopper...
(Annotation: The Battery Charging Dock won't help, 'cause it's construed for standalone loading accumulators.)
Click to expand...
Click to collapse
mega oof
i hope put this to work today
AmberKat said:
mega oof
Click to expand...
Click to collapse
i hope put this to work today, and post here for you and others
board swap it